diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/gcccar.inc')
| -rw-r--r-- | src/vendorcode/amd/agesa/f15/gcccar.inc | 1618 |
1 files changed, 0 insertions, 1618 deletions
diff --git a/src/vendorcode/amd/agesa/f15/gcccar.inc b/src/vendorcode/amd/agesa/f15/gcccar.inc deleted file mode 100644 index b5f8fddcbf..0000000000 --- a/src/vendorcode/amd/agesa/f15/gcccar.inc +++ /dev/null @@ -1,1618 +0,0 @@ -/* - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -/****************************************************************************** -* AMD Generic Encapsulated Software Architecture -* -* $Workfile:: GccCar.inc $Revision:: 32932 $ -* -* Description: GccCar.inc - AGESA cache-as-RAM setup Include File for GCC complier -* -******************************************************************************/ - -.altmacro - -BSP_STACK_BASE_ADDR = 0x30000 /* Base address for primary cores stack */ -BSP_STACK_SIZE = 0x10000 /* 64KB for BSP core */ -CORE0_STACK_BASE_ADDR = 0x80000 /* Base address for primary cores stack */ -CORE0_STACK_SIZE = 0x4000 /* 16KB for primary cores */ -CORE1_STACK_BASE_ADDR = 0x40000 /* Base address for AP cores */ - -#ifdef __x86_64__ -CORE1_STACK_SIZE = 0x2000 /* 8KB for each AP cores */ -#else -CORE1_STACK_SIZE = 0x1000 /* 4KB for each AP cores */ -#endif - -APIC_BASE_ADDRESS = 0x0000001B - APIC_BSC = 8 /* Boot Strap Core */ - -AMD_MTRR_VARIABLE_BASE0 = 0x0200 -AMD_MTRR_VARIABLE_BASE6 = 0x020C -AMD_MTRR_VARIABLE_MASK7 = 0x020F -AMD_MTRR_FIX64k_00000 = 0x0250 -AMD_MTRR_FIX16k_80000 = 0x0258 -AMD_MTRR_FIX16k_A0000 = 0x0259 -AMD_MTRR_FIX4k_C0000 = 0x0268 -AMD_MTRR_FIX4k_C8000 = 0x0269 -AMD_MTRR_FIX4k_D0000 = 0x026A -AMD_MTRR_FIX4k_D8000 = 0x026B -AMD_MTRR_FIX4k_E0000 = 0x026C -AMD_MTRR_FIX4k_E8000 = 0x026D -AMD_MTRR_FIX4k_F0000 = 0x026E -AMD_MTRR_FIX4k_F8000 = 0x026F - -/* Reproduced from AGESA.h */ -AMD_AP_MTRR_FIX64k_00000 = 0x00000250 -AMD_AP_MTRR_FIX16k_80000 = 0x00000258 -AMD_AP_MTRR_FIX16k_A0000 = 0x00000259 -AMD_AP_MTRR_FIX4k_C0000 = 0x00000268 -AMD_AP_MTRR_FIX4k_C8000 = 0x00000269 -AMD_AP_MTRR_FIX4k_D0000 = 0x0000026A -AMD_AP_MTRR_FIX4k_D8000 = 0x0000026B -AMD_AP_MTRR_FIX4k_E0000 = 0x0000026C -AMD_AP_MTRR_FIX4k_E8000 = 0x0000026D -AMD_AP_MTRR_FIX4k_F0000 = 0x0000026E -AMD_AP_MTRR_FIX4k_F8000 = 0x0000026F -CPU_LIST_TERMINAL = 0xFFFFFFFF - -AMD_MTRR_DEFTYPE = 0x02FF - WB_DRAM_TYPE = 0x1E /* MemType - memory type */ - MTRR_DEF_TYPE_EN = 11 /* MtrrDefTypeEn - variable and fixed MTRRs default enabled */ - MTRR_DEF_TYPE_FIX_EN = 10 /* MtrrDefTypeEn - fixed MTRRs default enabled */ - -HWCR = 0x0C0010015 /* Hardware Configuration */ - INVD_WBINVD = 0x04 /* INVD to WBINVD conversion */ - -IORR_BASE = 0x0C0010016 /* IO Range Regusters Base/Mask, 2 pairs */ - /* uses 16h - 19h */ -TOP_MEM = 0x0C001001A /* Top of Memory */ -TOP_MEM2 = 0x0C001001D /* Top of Memory2 */ - -LS_CFG = 0x0C0011020 /* Load-Store Configuration */ - DIS_SS = 28 /* Family 10h,12h,15h:Disable Streng Store functionality */ - DIS_STREAM_ST = 28 /* Family 14h:DisStreamSt - Disable Streaming Store functionality */ - -IC_CFG = 0x0C0011021 /* Instruction Cache Config Register */ - IC_DIS_SPEC_TLB_RLD = 9 /* Disable speculative TLB reloads */ - DIS_IND = 14 /* Family 10-14h:Disable Indirect Branch Predictor */ - DIS_I_CACHE = 14 /* Family 15h:DisICache - Disable Indirect Branch Predictor */ - -DC_CFG = 0x0C0011022 /* Data Cache Configuration */ - DC_DIS_SPEC_TLB_RLD = 4 /* Disable speculative TLB reloads */ - DIS_CLR_WBTOL2_SMC_HIT = 8 /* self modifying code check buffer bit */ - DIS_HW_PF = 13 /* Hardware prefetches bit */ - -DE_CFG = 0x0C0011029 /* Decode Configuration */ - CL_FLUSH_SERIALIZE = 23 /* Family 12h,15h: CL Flush Serialization */ - -BU_CFG2 = 0x0C001102A /* Family 10h: Bus Unit Configuration 2 */ -CU_CFG2 = 0x0C001102A /* Family 15h: Combined Unit Configuration 2 */ - F10_CL_LINES_TO_NB_DIS = 15 /* ClLinesToNbDis - allows WP code to be cached in L2 */ - IC_DIS_SPEC_TLB_WR = 35 /* IcDisSpecTlbWr - ITLB speculative writes */ - -CU_CFG3 = 0x0C001102B /* Combined Unit Configuration 3 */ - COMBINE_CR0_CD = 49 /* Combine CR0.CD for both cores of a compute unit */ - - -CR0_PE = 0 # Protection Enable -CR0_NW = 29 # Not Write-through -CR0_CD = 30 # Cache Disable -CR0_PG = 31 # Paging Enable - -/* CPUID Functions */ - -CPUID_MODEL = 1 -AMD_CPUID_FMF = 0x80000001 /* Family Model Features information */ -AMD_CPUID_APIC = 0x80000008 /* Long Mode and APIC info., core count */ - -NB_CFG = 0x0C001001F /* Northbridge Configuration Register */ - INIT_APIC_ID_CPU_ID_LO = 54 /* InitApicIdCpuIdLo - is core# in high or low half of APIC ID? */ - -MTRR_SYS_CFG = 0x0C0010010 /* System Configuration Register */ - CHX_TO_DIRTY_DIS = 16 /* ChxToDirtyDis Change to dirty disable */ - SYS_UC_LOCK_EN = 17 /* SysUcLockEn System lock command enable */ - MTRR_FIX_DRAM_EN = 18 /* MtrrFixDramEn MTRR fixed RdDram and WrDram attributes enable */ - MTRR_FIX_DRAM_MOD_EN = 19 /* MtrrFixDramModEn MTRR fixed RdDram and WrDram modification enable */ - MTRR_VAR_DRAM_EN = 20 /* MtrrVarDramEn MTRR variable DRAM enable */ - MTRR_TOM2_EN = 21 /* MtrrTom2En MTRR top of memory 2 enable */ - -PERF_CONTROL3 = 0x0C0010003 /* Performance event control three */ - PERF_CONTROL3_RESERVE_L = 0x00200000 /* Preserve the reserved bits */ - PERF_CONTROL3_RESERVE_H = 0x0FCF0 /* Preserve the reserved bits */ - CONFIG_EVENT_L = 0x0F0E2 /* All cores with level detection */ - CONFIG_EVENT_H = 4 /* Increment count by number of event */ - /* occured in clock cycle */ - EVENT_ENABLE = 22 /* Enable the event */ -PERF_COUNTER3 = 0x0C0010007 /* Performance event counter three */ - -# Local use flags, in upper most byte if ESI -FLAG_UNKNOWN_FAMILY = 24 # Signals that the family# of the installed processor is not recognized -FLAG_STACK_REENTRY = 25 # Signals that the environment has made a re-entry (2nd) call to set up the stack -FLAG_IS_PRIMARY = 26 # Signals that this core is the primary within the comoute unit - -CR0_MASK = ((1 << CR0_CD) | (1 << CR0_NW)) -MSR_MASK = ((1 << MTRR_DEF_TYPE_EN)+(1 << MTRR_DEF_TYPE_FIX_EN)) - -/**************************************************************************** - * - * CPU MACROS - PUBLIC - * - ****************************************************************************/ -.macro _WRMSR - .byte 0x0f, 0x30 -.endm - -.macro _RDMSR - .byte 0x0F, 0x32 -.endm - -.macro AMD_CPUID arg0 - .ifb \arg0 - mov $0x1, %eax - .byte 0x0F, 0x0A2 /* Execute instruction */ - bswap %eax - xchg %ah, %al /* Ext model in al now */ - rol $0x08, %eax /* Ext model in ah, model in al */ - and $0x0FFCF, ax /* Keep 23:16, 7:6, 3:0 */ - .else - mov \arg0, %eax - .byte 0x0F, 0x0A2 - .endif -.endm - -/**************************************************************************** -* -* AMD_ENABLE_STACK_FAMILY_HOOK Macro - Stackless -* -* Set any family specific controls needed to enable the use of -* cache as general storage before main memory is available. -* -* Inputs: -* none -* Outputs: -* none - ****************************************************************************/ -.macro AMD_ENABLE_STACK_FAMILY_HOOK - - AMD_ENABLE_STACK_FAMILY_HOOK_F10 - AMD_ENABLE_STACK_FAMILY_HOOK_F12 - AMD_ENABLE_STACK_FAMILY_HOOK_F14 - AMD_ENABLE_STACK_FAMILY_HOOK_F15 -.endm - -/**************************************************************************** -* -* AMD_DISABLE_STACK_FAMILY_HOOK Macro - Stackless -* -* Return any family specific controls to their 'standard' -* settings for using cache with main memory. -* -* Inputs: -* none -* Outputs: -* none - ****************************************************************************/ -.macro AMD_DISABLE_STACK_FAMILY_HOOK - - AMD_DISABLE_STACK_FAMILY_HOOK_F10 - AMD_DISABLE_STACK_FAMILY_HOOK_F12 - AMD_DISABLE_STACK_FAMILY_HOOK_F14 - AMD_DISABLE_STACK_FAMILY_HOOK_F15 - -.endm - -/**************************************************************************** -* -* GET_NODE_ID_CORE_ID Macro - Stackless -* -* Read family specific values to determine the node and core -* numbers for the core executing this code. -* -* Inputs: -* none -* Outputs: -* SI[7:0] = Core# (0..N, relative to node) -* SI[15:8]= Node# (0..N) -* SI[23:16]= reserved -* SI[24]= flag: 1=Family Unrecognized -* SI[25]= flag: 1=Interface re-entry call -* SI[26]= flag: 1=Core is primary of compute unit -* SI[31:27]= reserved, =0 -****************************************************************************/ -.macro GET_NODE_ID_CORE_ID - LOCAL node_core_exit - - mov $-1, %si - GET_NODE_ID_CORE_ID_F10 - GET_NODE_ID_CORE_ID_F12 - GET_NODE_ID_CORE_ID_F14 - GET_NODE_ID_CORE_ID_F15 - /* - * Check for unrecognized Family - */ - cmp $-1, %si # Has family (node/core) already been discovered? - jnz node_core_exit # Br if yes - - mov $((1 << FLAG_UNKNOWN_FAMILY)+(1 << FLAG_IS_PRIMARY)), %esi # No, Set error code, Only let BSP continue - - mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B - _RDMSR - bt $APIC_BSC, %eax # Is this the BSC? - jc node_core_exit # Br if yes - hlt # Kill APs -node_core_exit: - -.endm - -/**************************************************************************** -## Family 10h MACROS -##*************************************************************************** -#--------------------------------------------------- -# -# AMD_ENABLE_STACK_FAMILY_HOOK_F10 Macro - Stackless -# -# Set any family specific controls needed to enable the use of -# cache as general storage before main memory is available. -# -# Inputs: -# ESI - node#, core#, flags from GET_NODE_ID_CORE_ID -# Outputs: -# none -# -# Family 10h requirements (BKDG section 2.3.3): -# * Paging disabled -# * MSRC001_0015[INVDWBINVD]=0 -# * MSRC001_1021[DIS_IND]=1 -# * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 -# * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 -# * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=1 -# * MSRC001_1022[DIS_HW_PF]=1 -# * MSRC001_102A[IcDisSpecTlbWr]=1 -# * MSRC001_102A[ClLinesToNbDis]=1 -# * No INVD or WBINVD, no exceptions, page faults or interrupts -****************************************************************************/ -.macro AMD_ENABLE_STACK_FAMILY_HOOK_F10 - LOCAL fam10_enable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x01, %al # Is this family 10h? - jnz fam10_enable_stack_hook_exit # Br if no - - mov $DC_CFG, %ecx # MSR:C001_1022 - _RDMSR - bts $DC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative DTLB reloads bit - bts $DIS_CLR_WBTOL2_SMC_HIT, %eax # Turn on Disable the self modifying code check buffer bit - bts $DIS_HW_PF, %eax # Turn on Disable hardware prefetches bit - _WRMSR - - dec %cx # MSR:C001_1021 - _RDMSR - bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative TLB reloads bit - bts $DIS_IND, %eax # Turn on Disable indirect branch predictor - _WRMSR - - mov $BU_CFG2, %ecx # MSR C001_102A - _RDMSR - bts $F10_CL_LINES_TO_NB_DIS, %eax # Allow BIOS ROM to be cached in the IC - bts $(IC_DIS_SPEC_TLB_WR-32), %edx #Disable speculative writes to the ITLB - _WRMSR - - mov $HWCR, %ecx # MSR C001_0015 - _RDMSR - bt $FLAG_STACK_REENTRY, %esi # Check if stack has already been set - jc fam10_skipClearingBit4 - btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion - _WRMSR - -fam10_skipClearingBit4: - mov %esi, %eax # load core# - or %al, %al # If (BSP) - jne fam10_enable_stack_hook_exit - mov $PERF_COUNTER3, %ecx # Select performance counter three - # to count number of CAR evictions - xor %eax, %eax # Initialize the lower part of the counter to zero - xor %edx, %edx # Initializa the upper part of the counter to zero - _WRMSR # Save it - mov $PERF_CONTROL3, %ecx # Select the event control three - _RDMSR # Get the current setting - and $PERF_CONTROL3_RESERVE_L, %eax # Preserve the reserved bits - or $CONFIG_EVENT_L, %eax # Set the lower part of event register to - # select CAR Corruption occurred by any cores - and $PERF_CONTROL3_RESERVE_H, %dx # Preserve the reserved bits - or $CONFIG_EVENT_H, %dx # Set the upper part of event register - _WRMSR # Save it - bts $EVENT_ENABLE, %eax # Enable it - _WRMSR # Save it - -fam10_enable_stack_hook_exit: -.endm - -/**************************************************************************** -* -* AMD_DISABLE_STACK_FAMILY_HOOK_F10 Macro - Stackless -* -* Return any family specific controls to their 'standard' -* settings for using cache with main memory. -* -* Inputs: -* ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# -* Outputs: -* none -* -* Family 10h requirements: -* * INVD or WBINVD -* * MSRC001_0015[INVD_WBINVD]=1 -* * MSRC001_1021[DIS_IND]=0 -* * MSRC001_1021[DIS_SPEC_TLB_RLD]=0 -* * MSRC001_1022[DIS_SPEC_TLB_RLD]=0 -* * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=0 -* * MSRC001_1022[DIS_HW_PF]=0 -* * MSRC001_102A[IcDisSpecTlbWr]=0 -* * MSRC001_102A[ClLinesToNbDis]=0 -*****************************************************************************/ - -.macro AMD_DISABLE_STACK_FAMILY_HOOK_F10 - LOCAL fam10_disable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x01, %al # Is this family 10h? - jnz fam10_disable_stack_hook_exit # Br if no - - mov $DC_CFG, %ecx # MSR:C001_1022 - _RDMSR - btr $DC_DIS_SPEC_TLB_RLD, %eax # Enable speculative TLB reloads - btr $DIS_CLR_WBTOL2_SMC_HIT, %eax # Allow self modifying code check buffer - btr $DIS_HW_PF, %eax # Allow hardware prefetches - _WRMSR - - dec %cx # MSR:C001_1021 - _RDMSR - btr $DIS_IND, %eax # Turn on indirect branch predictor - btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads - _WRMSR - - mov $BU_CFG2, %ecx # MSR:C001_102A - _RDMSR -/* - * BTS error if SBIOS `allows WP code to be cached', but copying - * ramstage/payloads from ROM to RAM will be very slow if disable it here. - * - * TODO: disable `allows WP code to be cached' after the ROM to RAM copying. - */ -// btr $F10_CL_LINES_TO_NB_DIS, %eax # Return L3 to normal mode - btr $(IC_DIS_SPEC_TLB_WR-32), %edx #Re-enable speculative writes to the ITLB - _WRMSR - - #-------------------------------------------------------------------------- - # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - - mov $HWCR, %ecx # MSR:0000_0015 - _RDMSR - mov %ax, %bx # Save INVD -> WBINVD bit - btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion for the invd instruction. - _WRMSR - invd # Clear the cache tag RAMs - mov %bx, %ax # Restore INVD -> WBINVD bit - _WRMSR - - #-------------------------------------------------------------------------- - # End critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - - mov $PERF_CONTROL3, %ecx # Select the event control three - _RDMSR # Retrieve the current value - btc $EVENT_ENABLE, %eax # Is event enable, complement it as well - jnc fam10_disable_stack_hook_exit # No - cmp $CONFIG_EVENT_L, %ax # Is the lower part of event set to capture the CAR Corruption - jne fam10_disable_stack_hook_exit # No - cmp $CONFIG_EVENT_H, %dl # Is the upper part of event set to capture the CAR Corruption - jne fam10_disable_stack_hook_exit # No - _WRMSR # Disable the event - -fam10_disable_stack_hook_exit: -.endm - -/**************************************************************************** -* -* GET_NODE_ID_CORE_ID_F10 Macro - Stackless -* -* Read family specific values to determine the node and core -* numbers for the core executing this code. -* -* Inputs: -* none -* Outputs: -* SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above) -*****************************************************************************/ -.macro GET_NODE_ID_CORE_ID_F10 - - LOCAL node_core_f10_exit - LOCAL node_core_f10_AP - - cmp $-1, %si # Has node/core already been discovered? - jnz node_core_f10_exit # Br if yes - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x01, %al # Is this family 10h? - jnz node_core_f10_exit # Br if no - - xor %esi, %esi # Assume BSC, clear flags - mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B - _RDMSR - bt $APIC_BSC, %eax # Is this the BSC? - jnc node_core_f10_AP # Br if no - - # This is the BSP. - # Enable routing tables on BSP (just in case the HT init code has not yet enabled them) - mov $0x8000C06C, %eax # PCI address for D18F0x6C Link Initialization Control Register - mov $0x0CF8, %dx - out %eax, %dx - add $4, %dx - in %dx, %eax - btr $0, %eax # Set LinkInitializationControl[RouteTblDis] = 0 - out %eax, %dx - jmp 1f # - -node_core_f10_AP: - # - # This is an AP. Routing tables have been enabled by the HT Init process. - # Also, the MailBox register was set by the BSP during early init - # The Mailbox register content is formatted as follows: - # UINT32 Node:4# // The node id of Core's node. - # UINT32 Socket:4# // The socket of this Core's node. - # UINT32 Module:2# // The internal module number for Core's node. - # UINT32 ModuleType:2# // Single Module = 0, Multi-module = 1. - # UINT32 :20# // Reserved - # - mov $0x0C0000408, %ecx # Read the family 10h mailbox - _RDMSR # MC4_MISC1[63:32] - mov %dx, %si # SI = raw mailbox contents (will extract node# from this) - shr $24, %ebx # BL = CPUID Fn0000_0001_EBX[LocalApicId] - mov %bx, %di # DI = Initial APIC ID (will extract core# from this) - - AMD_CPUID $AMD_CPUID_APIC # - shr $4, %ch # CH = ApicIdSize, #bits in APIC ID that show core# - inc %cl # CL = Number of enabled cores in the socket - mov %cx, %bx - - mov $NB_CFG, %ecx # MSR:C001_001F - _RDMSR # EDX has InitApicIdCpuIdLo bit - - mov %bh, %cl # CL = APIC ID size - mov $1, %al # Convert APIC ID size to an AND mask - shl %cl, %al # AL = 2^APIC ID size - dec %al # AL = mask for relative core number - xor %ah, %ah # AX = mask for relative core number - bt $(INIT_APIC_ID_CPU_ID_LO-32), %edx # InitApicIdCpuIdLo == 1? - #.if (!carry?) # Br if yes - jc 0f - mov $8, %ch # Calculate core number shift count - sub %cl, %ch # CH = core shift count - mov %ch, %cl - shr %cl, %di # Right justify core number - #.endif - 0: - and %ax, %di # DI = socket-relative core number - - mov %si, %cx # CX = raw mailbox value - shr $10, %cx # CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM) - and $3, %cl # Isolate ModuleType - xor %bh, %bh # BX = Number of enabled cores in the socket - shr %cl, %bx # BX = Number of enabled cores per node - xor %dx, %dx # Clear upper word for div - mov %di, %ax # AX = socket-relative core number - div %bx # DX = node-relative core number - movzx %si, %eax # prepare return value, [23:16]=shared Core# (=0, not shared) - and $0x000F, %ax # AX = node number - shl $8, %ax # [15:8]=node# - mov %dl, %al # [7:0]=core# (relative to node) - mov %eax, %esi # ESI = return value -1: - bts $FLAG_IS_PRIMARY, %esi # all Family 10h cores are primary -node_core_f10_exit: -.endm - - -/***************************************************************************** -** Family 12h MACROS -*****************************************************************************/ -/***************************************************************************** -* -* AMD_ENABLE_STACK_FAMILY_HOOK_F12 Macro - Stackless -* -* Set any family specific controls needed to enable the use of -* cache as general storage before main memory is available. -* -* Inputs: -* ESI - node#, core#, flags from GET_NODE_ID_CORE_ID -* Outputs: -* none -* -* Family 12h requirements (BKDG section 2.3.3): -* The following requirements must be satisfied prior to using the cache as general storage: -* * Paging must be disabled. -* * MSRC001_0015[INVD_WBINVD]=0 -* * MSRC001_1020[DIS_SS]=1 -* * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 -* * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 -* * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=1 -* * MSRC001_1022[DIS_HW_PF]=1 -* * MSRC001_1029[ClflushSerialize]=1 -* * No INVD or WBINVD, no exceptions, page faults or interrupts -*****************************************************************************/ -.macro AMD_ENABLE_STACK_FAMILY_HOOK_F12 - LOCAL fam12_enable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x03, %al # Is this family 12h? - jnz fam12_enable_stack_hook_exit # Br if no - - mov $DC_CFG, %ecx # MSR:C001_1022 - _RDMSR - bts $DC_DIS_SPEC_TLB_RLD, %eax # Disable speculative DC-TLB reloads - bts $DIS_CLR_WBTOL2_SMC_HIT, %eax # Disable self modifying code check buffer - bts $DIS_HW_PF, %eax # Disable hardware prefetches - _WRMSR - - dec %cx #IC_CFG # MSR:C001_1021 - _RDMSR - bts $IC_DIS_SPEC_TLB_RLD, %eax # Disable speculative IC-TLB reloads - _WRMSR - - dec %cx #LS_CFG # MSR:C001_1020 - _RDMSR - bts $DIS_SS, %eax # Disabled Streaming store functionality - _WRMSR - - mov $HWCR, %ecx # MSR C001_0015 - _RDMSR - bt $FLAG_STACK_REENTRY , %esi # Check if stack has already been set - jc fam12_skipClearingBit4 - btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion - _WRMSR - -fam12_skipClearingBit4: - mov $DE_CFG, %ecx # MSR:C001_1029 - _RDMSR - bts $CL_FLUSH_SERIALIZE, %eax # Serialize all CL Flush actions - _WRMSR - -fam12_enable_stack_hook_exit: -.endm - -/***************************************************************************** -* -* AMD_DISABLE_STACK_FAMILY_HOOK_F12 Macro - Stackless -* -* Return any family specific controls to their 'standard' -* settings for using cache with main memory. -* -* Inputs: -* ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# -* Outputs: -* none -* -* Family 12h requirements: -* * INVD or WBINVD -* * MSRC001_0015[INVD_WBINVD]=1 -* * MSRC001_1020[DIS_SS]=0 -* * MSRC001_1021[IC_DIS_SPEC_TLB_RLD]=0 -* * MSRC001_1022[DC_DIS_SPEC_TLB_RLD]=0 -* * MSRC001_1022[DIS_CLR_WBTOL2_SMC_HIT]=0 -* * MSRC001_1022[DIS_HW_PF]=0 -* * MSRC001_1029[ClflushSerialize]=0 -*****************************************************************************/ -.macro AMD_DISABLE_STACK_FAMILY_HOOK_F12 - LOCAL fam12_disable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x03, %al # Is this family 12h? - jnz fam12_disable_stack_hook_exit # Br if no - - mov $DC_CFG, %ecx # MSR:C001_1022 - _RDMSR - btr $DC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative DC-TLB reloads - btr $DIS_CLR_WBTOL2_SMC_HIT, %eax # Enable self modifying code check buffer - btr $DIS_HW_PF, %eax # Enable Hardware prefetches - _WRMSR - - dec %cx #IC_CFG # MSR:C001_1021 - _RDMSR - btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative IC-TLB reloads - _WRMSR - - dec %cx #LS_CFG # MSR:C001_1020 - _RDMSR - btr $DIS_SS, %eax # Turn on Streaming store functionality - _WRMSR - - mov $DE_CFG, %ecx # MSR:C001_1029 - _RDMSR - btr $CL_FLUSH_SERIALIZE, %eax - _WRMSR - - #-------------------------------------------------------------------------- - # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - - mov $HWCR, %ecx # MSR:0000_0015h - _RDMSR - mov %ax, %bx # Save INVD -> WBINVD bit - btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion - _WRMSR - invd # Clear the cache tag RAMs - mov %bx, %ax # Restore INVD -> WBINVD bit - _WRMSR - - #-------------------------------------------------------------------------- - # End critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - -fam12_disable_stack_hook_exit: -.endm - -/***************************************************************************** -* -* GET_NODE_ID_CORE_ID_F12 Macro - Stackless -* -* Read family specific values to determine the node and core -* numbers for the core executing this code. -* -* Inputs: -* none -* Outputs: -* SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above) -*****************************************************************************/ -.macro GET_NODE_ID_CORE_ID_F12 - - LOCAL node_core_f12_exit - - cmp $-1, %si # Has node/core already been discovered? - jnz node_core_f12_exit # Br if yes - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x03, %al # Is this family 12h? - jnz node_core_f12_exit # Br if no - - shr $24, %ebx # CPUID_0000_0001_EBX[31:24]: initial local APIC physical ID - bts $FLAG_IS_PRIMARY, %ebx # all family 12h cores are primary - mov %ebx, %esi # ESI = Node#=0, core number -node_core_f12_exit: -.endm - -/***************************************************************************** -** Family 14h MACROS -*****************************************************************************/ -/***************************************************************************** -* -* AMD_ENABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless -* -* Set any family specific controls needed to enable the use of -* cache as general storage before main memory is available. -* -* Inputs: -* ESI - node#, core#, flags from GET_NODE_ID_CORE_ID -* Outputs: -* none -* -* Family 14h requirements (BKDG section 2.3.3): -* * Paging must be disabled. -* * MSRC001_0015[INVD_WBINVD]=0. -* * MSRC001_1020[DisStreamSt]=1. -* * MSRC001_1021[DIS_SPEC_TLB_RLD]=1. Disable speculative ITLB reloads. -* * MSRC001_1022[DIS_HW_PF]=1. -* * No INVD or WBINVD, no exceptions, page faults or interrupts -*****************************************************************************/ -.macro AMD_ENABLE_STACK_FAMILY_HOOK_F14 - LOCAL fam14_enable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x05, %al # Is this family 14h? - jnz fam14_enable_stack_hook_exit # Br if no - - mov $DC_CFG, %ecx # MSR:C001_1022 - _RDMSR - bts $DIS_HW_PF, %eax # Disable hardware prefetches - _WRMSR - - dec %cx #IC_CFG # MSR:C001_1021 - _RDMSR - bts $IC_DIS_SPEC_TLB_RLD, %eax # Disable speculative TLB reloads - _WRMSR - - dec %cx #LS_CFG # MSR:C001_1020 - _RDMSR - bts $DIS_STREAM_ST, %eax # Disabled Streaming store functionality - _WRMSR - - mov $HWCR, %ecx # MSR C001_0015 - _RDMSR - bt $FLAG_STACK_REENTRY, %esi # Check if stack has already been set - jc fam14_skipClearingBit4 - btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion - _WRMSR -fam14_skipClearingBit4: # Keeping this label - -fam14_enable_stack_hook_exit: -.endm - -/***************************************************************************** -* -* AMD_DISABLE_STACK_FAMILY_HOOK_F14 Macro - Stackless -* -* Return any family specific controls to their 'standard' -* settings for using cache with main memory. -* -* Inputs: -* ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# -* Outputs: -* none -* -* Family 14h requirements: -* * INVD or WBINVD -* * MSRC001_0015[INVD_WBINVD]=1. -* * MSRC001_1020[DisStreamSt]=0. -* * MSRC001_1021[DIS_SPEC_TLB_RLD]=0. -* * MSRC001_1022[DIS_HW_PF]=0. -*****************************************************************************/ -.macro AMD_DISABLE_STACK_FAMILY_HOOK_F14 - LOCAL fam14_disable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x05, %al # Is this family 14h? - jnz fam14_disable_stack_hook_exit # Br if no - - mov $LS_CFG, %ecx # MSR:C001_1020 - _RDMSR - btr $DIS_STREAM_ST, %eax # Turn on Streaming store functionality - _WRMSR - - inc %cx #IC_CFG # MSR:C001_1021 - _RDMSR - btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative DC-TLB reloads - _WRMSR - - inc %cx #DC_CFG # MSR:C001_1022 - _RDMSR - btr $DIS_HW_PF, %eax # Turn on hardware prefetches - _WRMSR - - #-------------------------------------------------------------------------- - # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - - mov $HWCR, %ecx # MSR:C001_0015h - _RDMSR - btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion - _WRMSR - invd # Clear the cache tag RAMs - bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD - _WRMSR - - #-------------------------------------------------------------------------- - # End critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - -fam14_disable_stack_hook_exit: -.endm - -/***************************************************************************** -* -* GET_NODE_ID_CORE_ID_F14 Macro - Stackless -* -* Read family specific values to determine the node and core -* numbers for the core executing this code. -* -* Inputs: -* none -* Outputs: -* SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above) -*****************************************************************************/ -.macro GET_NODE_ID_CORE_ID_F14 - - LOCAL node_core_f14_exit - - cmp $-1, %si # Has node/core already been discovered? - jnz node_core_f14_exit # Br if yes - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x05, %al # Is this family 14h? - jnz node_core_f14_exit # Br if no - - xor %esi, %esi # Node must be 0 - bts $FLAG_IS_PRIMARY, %esi # all family 14h cores are primary - mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B - _RDMSR - bt $APIC_BSC, %eax # Is this the BSC? - jc node_core_f14_exit # Br if yes - inc %si # Set core to 1 -node_core_f14_exit: -.endm - - - -/***************************************************************************** -** Family 15h MACROS -*****************************************************************************/ -/***************************************************************************** -* -* AMD_ENABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless -* -* Set any family specific controls needed to enable the use of -* cache as general storage before main memory is available. -* -* Inputs: -* ESI - node#, core#, flags from GET_NODE_ID_CORE_ID -* Outputs: -* none -* -* Family 15h requirements (BKDG #42301 section 2.3.3): -* * Paging must be disabled. -* * MSRC001_0015[INVD_WBINVD]=0 -* * MSRC001_1020[DisSS]=1 -* * MSRC001_1021[DIS_SPEC_TLB_RLD]=1 -* * MSRC001_1022[DIS_SPEC_TLB_RLD]=1 -* * MSRC001_1022[DisHwPf]=1 -* * No INVD or WBINVD, no exceptions, page faults or interrupts -*****************************************************************************/ -.macro AMD_ENABLE_STACK_FAMILY_HOOK_F15 - LOCAL fam15_enable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $0x06, %al # Is this family 15h? - jnz fam15_enable_stack_hook_exit # Br if no - - bt $FLAG_STACK_REENTRY , %esi # Check if stack has already been set - jc fam15_skipClearingBit4 - mov $HWCR, %ecx # MSR C001_0015 - _RDMSR - btr $INVD_WBINVD, %eax # disable INVD -> WBINVD conversion - _WRMSR - -fam15_skipClearingBit4: - mov $LS_CFG, %ecx # MSR:C001_1020 - _RDMSR - bts $DIS_SS, %eax # Turn on Streaming store functionality disabled bit - _WRMSR - - inc %ecx #IC_CFG # MSR:C001_1021 - _RDMSR - bts $IC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative IC-TLB reloads bit - _WRMSR - - inc %ecx #DC_CFG # MSR:C001_1022 - _RDMSR - bts $DC_DIS_SPEC_TLB_RLD, %eax # Turn on Disable speculative DC-TLB reloads bit - bts $DIS_HW_PF, %eax # Turn on Disable hardware prefetches bit - _WRMSR - - mov $CU_CFG3, %ecx # MSR:C001_102B - _RDMSR - btr $(COMBINE_CR0_CD - 32), %edx # Clear CombineCr0Cd bit - _WRMSR - -fam15_enable_stack_hook_exit: -.endm - - -/***************************************************************************** -* -* AMD_DISABLE_STACK_FAMILY_HOOK_F15 Macro - Stackless -* -* Return any family specific controls to their 'standard' -* settings for using cache with main memory. -* -* Inputs: -* ESI - [31:24] flags; [15,8]= Node#; [7,0]= core# -* Outputs: -* none -* -* Family 15h requirements: -* * INVD or WBINVD -* * MSRC001_0015[INVD_WBINVD]=1 -* * MSRC001_1020[DisSS]=0 -* * MSRC001_1021[DIS_SPEC_TLB_RLD]=0 -* * MSRC001_1022[DIS_SPEC_TLB_RLD]=0 -* * MSRC001_1022[DIS_HW_PF]=0 -*****************************************************************************/ -.macro AMD_DISABLE_STACK_FAMILY_HOOK_F15 - LOCAL fam15_disable_stack_hook_exit - - AMD_CPUID $CPUID_MODEL - mov %eax, %ebx # Save revision info to EBX - shr $20, %eax # AL = cpu extended family - cmp $0x06, %al # Is this family 15h? - jnz fam15_disable_stack_hook_exit # Br if no - - mov $LS_CFG, %ecx # MSR:C001_1020 - #.if (ebx != 00600F00h) ; Is this rev A0? - cmp $0x00600F00, %ebx - jz 0f - _RDMSR - btr $DIS_SS, %eax # Turn on Streaming store functionality - _WRMSR - #.endif - 0: # End workaround for errata 495 and 496 - - inc %ecx #IC_CFG # MSR:C001_1021 - _RDMSR - btr $IC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads - _WRMSR - - inc %ecx #DC_CFG # MSR:C001_1022 - _RDMSR - btr $DC_DIS_SPEC_TLB_RLD, %eax # Turn on speculative TLB reloads - #.if (ebx != 00600F00h) # Is this rev A0? - cmp $0x00600F00, %ebx - jz 0f - btr $DIS_HW_PF, %eax # Turn on hardware prefetches - #.endif # End workaround for erratum 498 - 0: - _WRMSR - #-------------------------------------------------------------------------- - # Begin critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - - bt $FLAG_IS_PRIMARY, %esi - #.if (carry?) # Only clear cache from primary core - jnc 0f - mov $HWCR, %ecx # MSR:C001_0015h - _RDMSR - btr $INVD_WBINVD, %eax # Disable INVD -> WBINVD conversion - _WRMSR - invd # Clear the cache tag RAMs - bts $INVD_WBINVD, %eax # Turn on Conversion of INVD to WBINVD - _WRMSR - #.endif # end - 0: - - #-------------------------------------------------------------------------- - # End critical sequence in which EAX, BX, ECX, and EDX must be preserved. - #-------------------------------------------------------------------------- - - mov $CU_CFG3, %ecx # MSR:C001_102B - _RDMSR - bts $(COMBINE_CR0_CD - 32), %edx # Set CombineCr0Cd bit - _WRMSR - -fam15_disable_stack_hook_exit: -.endm - - -/***************************************************************************** -* -* GET_NODE_ID_CORE_ID_F15 Macro - Stackless -* -* Read family specific values to determine the node and core -* numbers for the core executing this code. -* -* Inputs: -* none -* Outputs: -* SI = core#, node# & flags (see GET_NODE_ID_CORE_ID macro above) -*****************************************************************************/ -.macro GET_NODE_ID_CORE_ID_F15 - - LOCAL node_core_f15_exit - LOCAL node_core_f15_AP - LOCAL node_core_f15_shared - - cmp $-1, %si # Has node/core already been discovered? - jnz node_core_f15_exit # Br if yes - - AMD_CPUID $CPUID_MODEL - shr $20, %eax # AL = cpu extended family - cmp $06, %al # Is this family 15h? - jnz node_core_f15_exit # Br if no - - xor %esi, %esi # Assume BSC, clear local flags - mov $APIC_BASE_ADDRESS, %ecx # MSR:0000_001B - _RDMSR - bt $APIC_BSC, %eax # Is this the BSC? - jnc node_core_f15_AP # Br if no - - # This is the BSP. - # Enable routing tables on BSP (just in case the HT init code has not yet enabled them) - mov $0x8000C06C, %eax # PCI address for D18F0x6C Link Initialization Control Register - mov $0x0CF8, %dx - out %eax, %dx - add $4, %dx - in %dx, %eax - btr $0, %eax # Set LinkInitializationControl[RouteTblDis] = 0 - out %eax, %dx - jmp node_core_f15_shared # - -node_core_f15_AP: - # - # This is an AP. Routing tables have been enabled by the HT Init process. - # Also, the MailBox register was set by the BSP during early init - # The Mailbox register content is formatted as follows: - # UINT32 Node:4; // The node id of Core's node. - # UINT32 Socket:4; // The socket of this Core's node. - # UINT32 Module:2; // The internal module number for Core's node. - # UINT32 ModuleType:2; // Single Module = 0, Multi-module = 1. - # UINT32 :20; // Reserved - # - mov $0x0C0000408, %ecx # Read the family 15h mailbox - _RDMSR # MC4_MISC1[63:32] - mov %dx, %si # SI = raw mailbox contents (will extract node# from this) - shr $24, %ebx # BL = CPUID Fn0000_0001_EBX[LocalApicId] - mov %bx, %di # DI = Initial APIC ID (will extract core# from this) - - AMD_CPUID $AMD_CPUID_APIC # - shr $4, %ch # CH = ApicIdSize, #bits in APIC ID that show core# - inc %cl # CL = Number of enabled cores in the socket - mov %cx, %bx - - mov $NB_CFG, %ecx - _RDMSR # EDX has InitApicIdCpuIdLo bit - - mov %bh, %cl # CL = APIC ID size - mov $1, %al # Convert APIC ID size to an AND mask - shl %cl, %al # AL = 2^APIC ID size - dec %al # AL = mask for relative core number - xor %ah, %ah # AX = mask for relative core number - bt $(INIT_APIC_ID_CPU_ID_LO-32), %edx # InitApicIdCpuIdLo == 1? - #.if (!carry?) # Br if yes - jc 0f - mov $8, %ch # Calculate core number shift count - sub %cl, %ch # CH = core shift count - mov %ch, %cl - shr %cl, %di # Right justify core number - #.endif - 0: - and %ax, %di # DI = socket-relative core number - - mov %si, %cx # CX = raw mailbox value - shr $10, %cx # CL[1:0] = ModuleType or #nodes per socket (0-SCM, 1-MCM) - and $3, %cl # Isolate ModuleType - xor %bh, %bh # BX = Number of enabled cores in the socket - shr %cl, %bx # BX = Number of enabled cores per node - xor %dx, %dx # Clear upper word for div - mov %di, %ax # AX = socket-relative core number - div %bx # DX = node-relative core number - movzx %si, %eax # Prepare return value - and $0x000F, %ax # AX = node number - shl $8,%ax # [15:8]=node# - mov %dl, %al # [7:0]=core# (relative to node) - mov %eax, %esi # ESI = node-relative core number - - # - # determine if this core shares MTRRs - # -node_core_f15_shared: - mov $0x8000C580, %eax # Compute Unit Status - mov %si, %bx - shl $3, %bh # Move node# to PCI Dev# field - add %bh, %ah # Adjust for node number - mov $0x0CF8, %dx - out %eax, %dx - add $4, %dx - in %dx, %eax # [3:0]=Enabled# [19:16]=DualCore - - # BL is MyCore# - mov $0x06, %cx # Use CH as 'first of pair' core# - #.while (cl > 0) - jmp 0f - 8: - bt $0, %eax # Is pair enabled? - #.if (carry?) # - jnc 1f - mov $0x01, %bh # flag core as primary - bt $16, %eax # Is there a 2nd in the pair? - #.if (carry?) # - jnc 4f - #.break .if (ch == bl) # Does 1st match MyCore#? - cmp %bl, %ch - je 9f - inc %ch - xor %bh, %bh # flag core as NOT primary - #.break .if (ch == bl) # Does 2nd match MyCore#? - cmp %bl, %ch - je 9f - jmp 2f - #.else # No 2nd core - 4: - #.break .if (ch == bl) # Does 1st match MyCore#? - cmp %bl, %ch - je 9f - #.endif - 2: - inc %ch - #.endif - 1: - shr $1, %eax - dec %cl - #.endw - 0: - #.if (cl == 0) - cmp $0x0, %cl - ja 8b - 9: - or %cl, %cl - jne 1f - #Error - core# didn't match Compute Unit Status content - bts $FLAG_UNKNOWN_FAMILY, %esi - bts $FLAG_IS_PRIMARY, %esi # Set Is_Primary for unknowns - #.endif - 1: - #.if (bh != 0) # Check state of primary for the matched core - or %bh, %bh - je 2f - bts $FLAG_IS_PRIMARY, %esi # Set shared flag into return value - #.endif - 2: - -node_core_f15_exit: - -.endm - -/***************************************************************************** -* AMD_ENABLE_STACK: Setup a stack -* -* In: -* No inputs -* -* Out: -* SS:ESP - Our new private stack location -* -* EAX = AGESA_STATUS -* -* ECX = Stack size in bytes -* -* Requirements: -* * This routine presently is limited to a max of 64 processor cores -* Destroyed: -* EBX, EDX, EDI, ESI, EBP, DS, ES -* -* Description: -* Fixed MTRR address allocation to cores: -* The BSP gets 64K of stack, Core0 of each node gets 16K of stack, all other cores get 4K. -* There is a max of 1 BSP, 7 core0s and 56 other cores. -* Although each core has it's own cache storage, they share the address space. Each core must -* be assigned a private and unique address space for its stack. To support legacy systems, -* the stack needs to be within the legacy address space (1st 1Meg). Room must also be reserved -* for the other legacy elements (Interrupt vectors, BIOS ROM, video buffer, etc.) -* -* 80000h 40000h 00000h -* +----------+----------+----------+----------+----------+----------+----------+----------+ -* 64K | | | | | | | | | 64K ea -* ea +----------+----------+----------+----------+----------+----------+----------+----------+ -* | MTRR 0000_0250 MTRRfix64K_00000 | -* +----------+----------+----------+----------+----------+----------+----------+----------+ -* | 7 , 6 | 5 , 4 | 3 , 2 | 1 , 0 | 0 | | | | <-node -* |7..1,7..1 |7..1,7..1 |7..1,7..1 |7..1,7..1 | 0 | | | | <-core -* +----------+----------+----------+----------+----------+----------+----------+----------+ -* -* C0000h B0000h A0000h 90000h 80000h -* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -*16K | | | | | | | | | | | | | | | | | -* ea +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -* | MTRR 0259 MTRRfix16K_A0000 | MTRR 0258 MTRRfix16K_80000 | -* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -* | > Dis|play B|uffer | < | | | | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | <-node -* | > T| e m |p o r |a r y | B u |f f e |r A |r e a<| 0 | 0 | 0 | 0 | 0 | 0 | 0 | | <-core -* +------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+------+ -* -* E0000h D0000h C0000h -* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -* 4K | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -* ea +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -* | 026B MTRRfix4K_D8000 | 026A MTRRfix4K_D0000 | 0269 MTRRfix4K_C8000 | 0268 MTRRfix4K_C0000 | -* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -* | | | | | | | | | | | | | | | | | >| V| I| D| E| O| |B |I |O |S | |A |r |e |a<| -* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -* -* 100000h F0000h E0000h -* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -* | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4K ea -* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -* | 026F MTRRfix4K_F8000 | 026E MTRRfix4K_F0000 | 026D MTRRfix4K_E8000 | 026C MTRRfix4K_E0000 | -* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -* | >|MA|IN| B|IO|S |RA|NG|E | | | | | | |< | >|EX|TE|ND|ED| B|IO|S |ZO|NE| | | | | |< | -* +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ -*****************************************************************************/ -.macro AMD_ENABLE_STACK - -# These are local labels. Declared so linker doesn't cause 'redefined label' errors - LOCAL SetupStack - LOCAL Real16bMode - LOCAL Protected32Mode - LOCAL ClearTheStack - -# Note that SS:ESP will be default stack. Note that this stack -# routine will not be used after memory has been initialized. Because -# of its limited lifetime, it will not conflict with typical PCI devices. - - # get node id and core id of current executing core - GET_NODE_ID_CORE_ID # Sets ESI[23:16]=Shared core## SI[15,8]= Node## SI[7,0]= core# (relative to node) - # Note: ESI[31:24] are used for flags: Unrecognized Family, Is_Primary core, Stack already established - - # determine if stack is already enabled. We are using the DefType MSR for this determination. - # It is =0 after reset; CAR setup sets it to enable the MTRRs - mov %cr0, %eax - test $CR0_MASK, %eax # Is cache disabled? (CD & NW bits) - jnz SetupStack # Jump if yes - mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF - _RDMSR - test $MSR_MASK, %eax # Are the default types enabled? (MTRR_DEF_TYPE_EN + MTRR_DEF_TYPE_FIX_EN) - jz SetupStack # Jump if no - or $FLAG_STACK_REENTRY, %esi # Bit25, indicate stack has already been initialized - -SetupStack: - # Set node to map the first 16MB to node 0# 0000_0000 to 00FF_FFFF as DRAM - mov %esi, %ebx # Get my Node/Core info - xor %bl, %bl - shl $3, %bh # Isolate my node#, match alignment for PCI Dev# - mov $0x8000C144, %eax # D18F1x44:DRAM Base/Limit# N is Base, N+4 is Limit - add %bh, %ah - mov %eax, %ebx # Save PCI address for Base/Limit pair - - mov $0x0CF8, %dx - out %eax, %dx - add $4, %dx - xor %eax, %eax # Least Significant bit is AD24 so 0 sets mask of 00FF_FFFF (16MB) - out %eax, %dx # DRAM Limit = node0, no interleave - - mov %ebx, %eax - sub $4, %eax # Now point to the Base register - mov $0x0CF8, %dx - out %eax, %dx - add $4, %dx - mov $0x00000003, %eax # Set the read and write enable bits - out %eax, %dx # DRAM Base = 0x0000, R/W - - AMD_ENABLE_STACK_FAMILY_HOOK - - # Init CPU MSRs for our init routines - mov $MTRR_SYS_CFG, %ecx # SYS_CFG - _RDMSR - bts $MTRR_FIX_DRAM_MOD_EN, %eax # Turn on modification enable bit - _WRMSR - - mov %esi, %eax - bt $FLAG_STACK_REENTRY, %eax # Is this a 2nd entry? - #.if (!carry?) # On a re-entry, do not clear MTRRs or reset TOM; just reset the stack SS:ESP - jc 0f - bt $FLAG_IS_PRIMARY, %eax # Is this core the primary in a compute unit? - #.if (carry?) # Families using shared groups do not need to clear the MTRRs since that is done at power-on reset - # Note: Relying on MSRs to be cleared to 0's at reset for families w/shared cores - # Clear all variable and Fixed MTRRs for non-shared cores - jnc 0f - mov $AMD_MTRR_VARIABLE_BASE0, %ecx - xor %eax, %eax - xor %edx, %edx - #.while (cl != 10h) # Variable MTRRphysBase[n] and MTRRphysMask[n] - jmp 1f - 2: - _WRMSR - inc %cl - #.endw - 1: - cmp $0x10, %cl - jne 2b - mov $AMD_MTRR_FIX64k_00000, %cx # MSR:0000_0250 - _WRMSR - mov $AMD_MTRR_FIX16k_80000, %cx # MSR:0000_0258 - _WRMSR - mov $AMD_MTRR_FIX16k_A0000, %cx # MSR:0000_0259 - _WRMSR - mov $AMD_MTRR_FIX4k_C0000, %cx # Fixed 4Ks: MTRRfix4K_C0000 to MTRRfix4K_F8000 - #.while (cl != 70h) - jmp 3f - 4: - _WRMSR - inc %cl - #.endw - 3: - cmp $0x70, %cl - jne 4b - # Set TOP_MEM (C001_001A) for non-shared cores to 16M. This will be increased at heap init. - # - not strictly needed since the FixedMTRRs take presedence. - mov $(16 * 1024 * 1024), %eax - mov $TOP_MEM, %ecx # MSR:C001_001A - _WRMSR - #.endif # End Is_Primary - #.endif # End Stack_ReEntry - 0: - # Clear IORRs (C001_0016-19) and TOM2(C001_001D) for all cores - xor %eax, %eax - xor %edx, %edx - mov $IORR_BASE, %ecx # MSR:C001_0016 - 0019 - #.while (cl != 1Ah) - jmp 1f - 2: - _WRMSR - inc %cl - #.endw - 1: - cmp $0x1A, %cl - jne 2b - mov $TOP_MEM2, %ecx # MSR:C001_001D - _WRMSR - - # setup MTRRs for stacks - # A speculative read can be generated by a speculative fetch mis-aligned in a code zone - # or due to a data zone being interpreted as code. When a speculative read occurs outside a - # controlled region (intentionally used by software), it could cause an unwanted cache eviction. - # To prevent speculative reads from causing an eviction, the unused cache ranges are set - # to UC type. Only the actively used regions (stack, heap) are reflected in the MTRRs. - # Note: some core stack regions will share an MTRR since the control granularity is much - # larger than the allocated stack zone. The allocation algorithm must account for this 'extra' - # space covered by the MTRR when parseling out cache space for the various uses. In some cases - # this could reduce the amount of EXE cache available to a core. see cpuCacheInit.c - # - # Outcome of this block is that: (Note the MTRR map at the top of the file) - # ebp - start address of stack block - # ebx - [31:16] - MTRR MSR address - # - [15:8] - slot# in MTRR register - # - [7:0] - block size in #4K blocks - # review: ESI[31:24]=Flags; SI[15,8]= Node#; SI[7,0]= core# (relative to node) - # - - mov %si, %ax # Load node, core - #.if (al == 0) # Is a core 0? - or %al, %al - jne 1f - #.if (ah == 0) # Is Node 0? (BSP) - or %ah, %ah - jne 2f - # Is BSP, assign a 64K stack - mov $((AMD_MTRR_FIX64k_00000 << 16) + (3 << 8) + (BSP_STACK_SIZE >> 12)), %ebx - mov $BSP_STACK_BASE_ADDR, %ebp - jmp 0f - #.else # node 1 to 7, core0 - 2: - # Is a Core0 of secondary node, assign 16K stacks - mov $AMD_MTRR_FIX16k_80000, %bx - shl $16, %ebx # - mov %ah, %bh # Node# is used as slot# - mov $(CORE0_STACK_SIZE >> 12), %bl - mov %ah, %al # Base = (Node# * Size)# - mul %bl # - movzx %ax, %eax # - shl $12, %eax # Expand back to full byte count (* 4K) - add $CORE0_STACK_BASE_ADDR, %eax - mov %eax, %ebp - #.endif - jmp 0f - #.else #core 1 thru core 7 - 1: - # Is core 1-7 of any node, assign 4K stacks - mov $8, %al # CoreIndex = ( (Node# * 8) ... - mul %ah # - mov %si, %bx # - add %bl, %al # ... + Core#)# - - mov $AMD_MTRR_FIX64k_00000, %bx - shl $16, %ebx # - mov %al, %bh # Slot# = (CoreIndex / 16) + 4# - shr $4, %bh # - add $4, %bh # - mov $(CORE1_STACK_SIZE >> 12), %bl - - mul %bl # Base = ( (CoreIndex * Size) ... - movzx %ax, %eax # - shl $12, %eax # Expand back to full byte count (* 4K) - add $CORE1_STACK_BASE_ADDR, %eax # ... + Base_Addr)# - mov %eax, %ebp - #.endif - 0: - - # Now set the MTRR. Add this to already existing settings (don't clear any MTRR) - mov $WB_DRAM_TYPE, %edi # Load Cache type in 1st slot - mov %bh, %cl # ShiftCount = ((slot# ... - and $0x03, %cl # ... % 4) ... - shl $0x03, %cl # ... * 8)# - shl %cl, %edi # Cache type is now in correct position - ror $16, %ebx # Get the MTRR address - movzx %bx, %ecx # - rol $16, %ebx # Put slot# & size back in BX - _RDMSR # Read-modify-write the MSR - #.if (bh < 4) # Is value in lower or upper half of MSR? - cmp $4, %bh - jae 1f - or %edi, %eax # - jmp 0f - #.else - 1: # - or %edi, %edx # - #.endif # - 0: - _WRMSR # - - # Enable MTRR defaults as UC type - mov $AMD_MTRR_DEFTYPE, %ecx # MSR:0000_02FF - _RDMSR # Read-modify-write the MSR - bts $MTRR_DEF_TYPE_EN, %eax # MtrrDefTypeEn - bts $MTRR_DEF_TYPE_FIX_EN, %eax # MtrrDefTypeFixEn - _WRMSR - - # Close the modification window on the Fixed MTRRs - mov $MTRR_SYS_CFG, %ecx # MSR:0C001_0010 - _RDMSR - bts $MTRR_FIX_DRAM_EN, %eax # MtrrFixDramEn - bts $MTRR_VAR_DRAM_EN, %eax # variable MTRR enable bit - btr $MTRR_FIX_DRAM_MOD_EN, %eax # Turn off modification enable bit - _WRMSR - - # Enable caching in CR0 - mov %cr0, %eax # Enable WT/WB cache - btr $CR0_PG, %eax # Make sure paging is disabled - btr $CR0_CD, %eax # Clear CR0 NW and CD - btr $CR0_NW, %eax - mov %eax, %cr0 - - # Use the Stack Base & size to calculate SS and ESP values - # review: - # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - # ebp - start address of stack block - # ebx - [31:16] - MTRR MSR address - # - [15:8] - slot# in MTRR register - # - [7:0] - block size in #4K blocks - # - mov %ebp, %esp # Initialize the stack pointer - mov %esp, %edi # Copy the stack start to edi - movzx %bl, %bx - movzx %bx, %ebx # Clear upper ebx, don't need MSR addr anymore - shl $12, %ebx # Make size full byte count (* 4K) - add %ebx, %esp # Set the Stack Pointer as full linear address - sub $4, %esp - # - # review: - # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - # edi - 32b start address of stack block - # ebx - size of stack block - # esp - 32b linear stack pointer - # - - # Determine mode for SS base; - mov %cr0, %ecx # Check for 32-bit protect mode - bt $CR0_PE, %ecx # - #.if (!carry?) # PE=0 means real mode - jc Protected32Mode - mov %cs, %cx # PE=1 - cmp $0x0D000, %cx # Check for CS - jb Protected32Mode # If CS < D000, it is a selector instead of a segment - # alter SS:ESP for 16b Real Mode: -Real16bMode: - mov %edi, %eax - shr $4, %eax # Create a Real Mode segment for ss, ds, es - mov %ax, %ss - mov %ax, %ds - mov %ax, %es - shl $4, %eax - sub %eax, %edi # Adjust the clearing pointer for Seg:Offset mode - mov %ebx, %esp # Make SP an offset from SS - sub $4, %esp # - # .endif # endif - # #else - # Default is to use Protected 32b Mode - #.endif - ; -Protected32Mode: - # - # Clear The Stack - # Now that we have set the location and the MTRRs, initialize the cache by - # reading then writing to zero all of the stack area. - # review: - # ss - Stack base - # esp - stack pointer - # ebx - size of stack block - # esi[31:24]=Flags; esi[15,8]= Node#; esi[7,0]= core# (relative to node) - # edi - address of start of stack block - # - -ClearTheStack: # Stack base is in SS, stack pointer is in ESP - shr $2, %ebx # ebx = stack block size in dwords - mov %bx, %cx # - # Check our flags - Don't clear an existing stack - #.if ( !(esi & 0FF000000h)) # Check our flags - test $(1 << FLAG_STACK_REENTRY), %esi - jne 1f - cld - mov %edi, %esi - rep lodsl (%esi) # Pre-load the range - xor %eax, %eax - mov %bx, %cx - mov %edi, %esi # Preserve base for push on stack - rep stosl (%edi) # Clear the range - movl $0x0ABCDDCBA, (%esp) # Put marker in top stack dword - shl $2, %ebx # Put stack size and base - push %ebx # in top of stack - push %esi - - mov %ebx, %ecx # Return size of stack in bytes - xor %eax, %eax # eax = 0 : no error return code - jmp 0f - #.else - 1: - movzx %cx, %ecx - shl $2, %ecx # Return size of stack in bytes - mov %esi, %eax - shr $24, %eax # Keep the flags as part of the error report - or $0x40000000, %eax # eax = AGESA_WARNING (Stack has already been set up) - #.endif - 0: -.endm - -/***************************************************************************** -* AMD_DISABLE_STACK: Destroy the stack inside the cache. This routine -* should only be executed on the BSP -* -* In: -* none -* -* Out: -* none -* -* Preserved: -* ESP -* Destroyed: -* EAX, EBX, ECX, EDX, EDI, ESI -*****************************************************************************/ -.macro AMD_DISABLE_STACK - - # get node/core/flags of current executing core - GET_NODE_ID_CORE_ID # Sets ESI[15,8]= Node#; ESI[7,0]= core# (relative to node) - - # Turn on modification enable bit - mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 - _RDMSR - bts $MTRR_FIX_DRAM_MOD_EN, %eax # Enable modifications - _WRMSR - - # Set lower 640K MTRRs for Write-Back memory caching - mov $AMD_MTRR_FIX64k_00000, %ecx - mov $0x1E1E1E1E, %eax - mov %eax, %edx - _WRMSR # 0 - 512K = WB Mem - mov $AMD_MTRR_FIX16k_80000, %ecx - _WRMSR # 512K - 640K = WB Mem - - # Turn off modification enable bit - mov $MTRR_SYS_CFG, %ecx # MSR:C001_0010 - _RDMSR - btr $MTRR_FIX_DRAM_MOD_EN, %eax # Disable modification - _WRMSR - - AMD_DISABLE_STACK_FAMILY_HOOK # Re-Enable 'normal' cache operations - -.endm |