diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c new file mode 100644 index 0000000000..ba5b4944ea --- /dev/null +++ b/src/vendorcode/amd/agesa/f15/Proc/Recovery/Mem/Tech/DDR3/mrtrci3.c @@ -0,0 +1,243 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mrtrci3.c + * + * Technology Control word initialization for DDR3 Recovery + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Proc/Recovery/Mem) + * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $ + * + **/ +/***************************************************************************** +* +* Copyright (C) 2012 Advanced Micro Devices, Inc. +* All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are met: +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* * Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the distribution. +* * Neither the name of Advanced Micro Devices, Inc. nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +* *************************************************************************** +* +*/ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "OptionMemory.h" +#include "Ids.h" +#include "mm.h" +#include "mn.h" +#include "mru.h" +#include "mt.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_RECOVERY_MEM_TECH_DDR3_MRTRCI3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +UINT8 +STATIC +MemRecTGetCtlWord3 ( + IN OUT MEM_TECH_BLOCK *TechPtr, + IN UINT8 CtrlWordNum + ); + +VOID +STATIC +MemRecTSendCtlWord3 ( + IN OUT MEM_TECH_BLOCK *TechPtr, + IN UINT8 CmdNum, + IN UINT8 Value + ); + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function sends control words + * + * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK + * + * @return pDCT->Timings.TrwtTO updated + */ + +VOID +MemRecTDramControlRegInit3 ( + IN OUT MEM_TECH_BLOCK *TechPtr + ) +{ + UINT8 RCNum; + UINT8 Data; + + MEM_DATA_STRUCT *MemPtr; + MEM_NB_BLOCK *NBPtr; + + NBPtr = TechPtr->NBPtr; + MemPtr = NBPtr->MemPtr; + + // wait 8us TACT must be changed to optimize to 8 MEM CLKs + // and wait 6us for PLL LOCK + MemRecUWait10ns (80 + 60, MemPtr); + + // 2. Program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects. + NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (NBPtr->DimmToBeUsed << 1)); + + for (RCNum = 0; RCNum <= 15; RCNum++) { + // wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs + MemRecUWait10ns (80, MemPtr); + + if ((RCNum != 6) && (RCNum != 7)) { + Data = MemRecTGetCtlWord3 (TechPtr, RCNum); + MemRecTSendCtlWord3 (TechPtr, RCNum, Data); + } + } + + MemRecUWait10ns (60, MemPtr); // wait 6us for TSTAB +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function calculates the ControlRC value + * + * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK + * @param[in] CtrlWordNum - control Word number. + * + * @return Control Word value + */ + +UINT8 +STATIC +MemRecTGetCtlWord3 ( + IN OUT MEM_TECH_BLOCK *TechPtr, + IN UINT8 CtrlWordNum + ) +{ + UINT8 Data; + + CH_DEF_STRUCT *ChannelPtr; + + ChannelPtr = TechPtr->NBPtr->ChannelPtr; + + Data = 0; //Default value for all control words is 0 + switch (CtrlWordNum) { + case 0: + Data = 0x02; // DA4=1 + break; + case 1: + Data = 0x0C; // if single rank, set DBA1 and DBA0 + break; + case 3: + Data = ChannelPtr->CtrlWrd03[TechPtr->NBPtr->DimmToBeUsed]; + break; + case 4: + Data = ChannelPtr->CtrlWrd04[TechPtr->NBPtr->DimmToBeUsed]; + break; + case 5: + Data = ChannelPtr->CtrlWrd05[TechPtr->NBPtr->DimmToBeUsed]; + break; + case 9: + Data = 0x0D; + break; + default:; + } + + return (Data&0x0F); +} +/* -----------------------------------------------------------------------------*/ +/** + * + * This function sends control word command + * + * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK + * @param[in] CmdNum - control number. + * @param[in] Value - value to send + * + */ + +VOID +STATIC +MemRecTSendCtlWord3 ( + IN OUT MEM_TECH_BLOCK *TechPtr, + IN UINT8 CmdNum, + IN UINT8 Value + ) +{ + MEM_NB_BLOCK *NBPtr; + + ASSERT (CmdNum < 16); + ASSERT (Value < 16); + + NBPtr = TechPtr->NBPtr; + + // 1. Program MrsBank and MrsAddress. + // n = [BA2, A2, A1, A0]. + // data = [BA1, BA0, A4, A3]. + // Set all other bits in MrsAddress to zero. + // + NBPtr->SetBitField (NBPtr, BFMrsBank, ((CmdNum&8) >> 1) | (Value >> 2)); + NBPtr->SetBitField (NBPtr, BFMrsAddress, ((Value&3) << 3) | (CmdNum&7)); + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCS%d RC%02d %04x\n", + (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 20) & 0xF, + ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 15) & 8) | + (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) & 7), + ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 14) & 0xC) | + ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 3) & 3)); + + // 2.Set SendCtrlWord=1 + NBPtr->SetBitField (NBPtr, BFSendCtrlWord, 1); + // 3.Wait for BFSendCtrlWord=0 + while (NBPtr->GetBitField (NBPtr, BFSendCtrlWord) != 0) {} +} |