diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c | 356 |
1 files changed, 356 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c new file mode 100644 index 0000000000..112b0b6482 --- /dev/null +++ b/src/vendorcode/amd/agesa/f15/Proc/Mem/Feat/CSINTLV/mfcsi.c @@ -0,0 +1,356 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfcsi.c + * + * Feature bank interleaving support (AKA Chip Select Interleaving ) + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat/Csintlv) + * @e \$Revision: 55216 $ @e \$Date: 2011-06-17 10:27:08 -0600 (Fri, 17 Jun 2011) $ + * + **/ +/***************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + + +/* This file contains functions for Chip Select interleaving */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "mfcsi.h" +#include "Ids.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_CSINTLV_MFCSI_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +BOOLEAN +STATIC +MemFDctInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +VOID +STATIC +CsIntSwap ( + IN OUT UINT32 *BaseMaskRegPtr, + IN UINT8 EnChipSels, + IN UINT8 LoBit, + IN UINT8 HiBit + ); + +BOOLEAN +MemFUndoInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ); + +/* + *----------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *----------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function Applies DIMM bank (chip-select) interleaving if enabled + * and if all criteria are met. Interleaves chip-selects on page boundaries. + * This function calls subfunctions that sets up CS interleaving on multiple Sockets + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - This feature is enabled. + * @return FALSE - This feature is not enabled. + */ + +BOOLEAN +MemFInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Dct; + BOOLEAN RetFlag; + + ASSERT (NBPtr != NULL); + + RetFlag = FALSE; + if (NBPtr->RefPtr->EnableBankIntlv) { + if (NBPtr->MCTPtr->NodeMemSize) { + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + RetFlag |= MemFDctInterleaveBanks (NBPtr); + } + } + } + return RetFlag; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function checks if bank interleaving has been enabled or not. If yes, it will + * undo bank interleaving. Otherwise, it does nothing. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - Bank interleaving has been enabled. + * @return FALSE - Bank interleaving has not been enabled. + */ + +BOOLEAN +MemFUndoInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Cs; + UINT8 Dct; + UINT32 CSMask; + BOOLEAN CSIntlvEnabled; + BOOLEAN RetFlag; + + ASSERT (NBPtr != NULL); + + RetFlag = FALSE; + + if (NBPtr->RefPtr->EnableBankIntlv) { + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + NBPtr->SwitchDCT (NBPtr, Dct); + if (NBPtr->DCTPtr->Timings.DctMemSize) { + CSIntlvEnabled = FALSE; + for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) { + if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) { + CSMask = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2)); + if (((CSMask >> 5) & 0x1FF) != 0x1FF) { + CSIntlvEnabled = TRUE; + break; + } + } + } + if (CSIntlvEnabled) { + MemFDctInterleaveBanks (NBPtr); + RetFlag = TRUE; + } + } + } + } + return RetFlag; +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function Applies DIMM bank (chip-select) interleaving if enabled + * and if all criteria are met. Interleaves chip-selects on page boundaries. + * This function is run once per Socket + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - Register bits have been swapped. + * @return FALSE - Register bits have not been swapped. + * + */ + +BOOLEAN +STATIC +MemFDctInterleaveBanks ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Cs; + UINT8 EnChipSels; + UINT8 BankEncd; + UINT8 BankEncd0; + UINT8 i; + UINT8 j; + UINT32 BankAddrReg; + UINT32 BaseRegS0; + UINT32 BaseRegS1; + UINT32 MaskReg; + UINT8 Offset; + UINT8 Dct; + + ASSERT (NBPtr != NULL); + + Dct = NBPtr->Dct; + + // Check if CS interleaving can be enabled + EnChipSels = 0; + BankEncd0 = 0xFF; + Offset = 0; + for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs++) { + if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 3) != 0) { + BankAddrReg = NBPtr->GetBitField (NBPtr, BFDramBankAddrReg); + BankEncd = (UINT8) ((BankAddrReg >> ((Cs / 2) * 4)) & 0xF); + if (BankEncd0 == 0xFF) { + BankEncd0 = BankEncd; + } else if (BankEncd0 != BankEncd) { + break; + } + if ((NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs) & 1) != 0) { + EnChipSels++; + } + } + } + + // Swap Dram Base/Mask Addr to enable CS interleaving + if ((Cs == MAX_CS_PER_CHANNEL) && ((EnChipSels == 2) || (EnChipSels == 4) || (EnChipSels == 8))) { + NBPtr->TechPtr->GetCSIntLvAddr (BankEncd0, &i, &j); + // Family specific CS interleaving low address adjustment + NBPtr->FamilySpecificHook[AdjustCSIntLvLowAddr] (NBPtr, &i); + + if (NBPtr->MCTPtr->Status[Sb128bitmode]) { + i++; + j++; + } + + for (Cs = 0; Cs < MAX_CS_PER_CHANNEL; Cs += 2) { + // + // LRDIMMS - Add an offset to the bit positions specified based on D18F2x[6C:60]_dct[1:0][RankDef] as follows: + // RankDef=0xb: 0 RankDef=10b: 1 RankDef=11b: 2 + // Using RankMult information: Lo/HiBit <<= (Mult >> 1) + // + if (NBPtr->MCTPtr->Status[SbLrdimms]) { + Offset = ((NBPtr->ChannelPtr->LrDimmRankMult[Cs >> 1]) >> 1); + } + BaseRegS0 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs); + BaseRegS1 = NBPtr->GetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1); + if (((BaseRegS0 | BaseRegS1) & 1) != 0) { + // Swap Mask register bits + MaskReg = NBPtr->GetBitField (NBPtr, BFCSMask0Reg + (Cs / 2)); + CsIntSwap (&MaskReg, EnChipSels, (i + Offset), (j + Offset)); + NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (Cs / 2), MaskReg); + + // Swap Base register bits + CsIntSwap (&BaseRegS0, EnChipSels, (i + Offset), (j + Offset)); + NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs, BaseRegS0); + CsIntSwap (&BaseRegS1, EnChipSels, (i + Offset), (j + Offset)); + NBPtr->SetBitField (NBPtr, BFCSBaseAddr0Reg + Cs + 1, BaseRegS1); + } + } + // + // Bank Interleaving is requested and has been enabled as well + // + NBPtr->MCTPtr->DctData[Dct].BkIntDis = FALSE; + return TRUE; + } else { + // + // Bank Interleaving is requested but cannot be enabled + // + PutEventLog (AGESA_WARNING, MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); + SetMemError (AGESA_WARNING, NBPtr->MCTPtr); + NBPtr->MCTPtr->DctData[Dct].BkIntDis = TRUE; + } + return FALSE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This supporting function swaps Chip selects + * + * @param[in,out] *BaseMaskRegPtr - Pointer to the Mask Register + * @param[in] *EnChipSels - Chip Selects to Enable + * @param[in] *LoBit - Lowest Bit + * @param[in] *HiBit - Highest Bit + * + * + */ + +VOID +STATIC +CsIntSwap ( + IN OUT UINT32 *BaseMaskRegPtr, + IN UINT8 EnChipSels, + IN UINT8 LoBit, + IN UINT8 HiBit + ) +{ + UINT8 BitDelta; + UINT32 TempHi; + UINT32 TempLo; + UINT32 AddrLoMask; + UINT32 AddrHiMask; + + ASSERT (BaseMaskRegPtr != NULL); + ASSERT (HiBit > LoBit); + + BitDelta = HiBit - LoBit; + AddrLoMask = (((UINT32)EnChipSels) - 1) << LoBit; + AddrHiMask = AddrLoMask << BitDelta; + + TempHi = TempLo = *BaseMaskRegPtr; + TempLo &= AddrLoMask; + TempLo <<= BitDelta; // move lower bits to upper bit position + TempHi &= AddrHiMask; + TempHi >>= BitDelta; // move upper bits to lower bit position + + *BaseMaskRegPtr &= ~AddrLoMask; + *BaseMaskRegPtr &= ~AddrHiMask; + *BaseMaskRegPtr |= TempLo | TempHi; +} |