diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c new file mode 100644 index 0000000000..0fc1631ca6 --- /dev/null +++ b/src/vendorcode/amd/agesa/f15/Proc/CPU/Family/0x10/F10PmDualPlaneOnlySupport.c @@ -0,0 +1,243 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Family_10 Dual-plane Only Support + * + * Performs the "BIOS Configuration for Dual-plane Only Support" as + * described in the BKDG. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU/F10 + * @e \$Revision: 56279 $ @e \$Date: 2011-07-11 13:11:28 -0600 (Mon, 11 Jul 2011) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ +#include "AGESA.h" +#include "amdlib.h" +#include "cpuRegisters.h" +#include "cpuApicUtilities.h" +#include "cpuServices.h" +#include "GeneralServices.h" +#include "cpuFamilyTranslation.h" +#include "cpuF10PowerMgmt.h" +#include "F10PmDualPlaneOnlySupport.h" +#include "F10PackageType.h" +#include "OptionMultiSocket.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_CPU_FAMILY_0X10_F10PMDUALPLANEONLYSUPPORT_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +extern OPTION_MULTISOCKET_CONFIGURATION OptionMultiSocketConfiguration; +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ +UINT32 +STATIC +SetPstateMSR ( + IN VOID *CPB, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------*/ +/** + * Family 10h core 0 entry point for performing the "Dual-plane Only Support" algorithm. + * + * The algorithm is as follows: + * // Determine whether algorithm applies to this processor + * if (CPUID Fn8000_0001_EBX[PkgType] == 0001b && (revision C or E) { + * // Determine whether processor is supported in this infrastructure + * if (((F3x1FC[DualPlaneOnly] == 1) && (this is a dual-plane platform)) + * || ((F3x1FC[AM3r2Only] == 1) && (this is an AM3r2 platform))) { + * // Fixup the P-state MSRs + * for (each core in the system) { + * if (CPUID Fn8000_0007[CPB]) { + * Copy MSRC001_0065 as MinPstate; + * Copy MSRC001_0068 to MSRC001_0065; + * Copy MinPstate to MSRC001_0068; + * } else { + * Copy MSRC001_0068 to MSRC001_0064; + * Program MSRC001_0068 = 0; + * } // endif + * for (each MSR in MSRC001_00[68:64]) { + * if (value in MSRC001_00[68:64][IddValue] != 0) { + * Set PstateEn in current MSR to 1; + * } // endif + * } // endfor + * } // endfor + * Set F3xDC[PstateMaxVal] = lowest-performance enabled P-state; + * Set F3xA8[PopDownPstate] = lowest-performance enabled P-state; + * Set F3x64[HtcPstateLimit] = lowest-performance enabled P-state; + * } // endif + * } // endif + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] CpuEarlyParamsPtr Service related parameters (unused). + * @param[in] StdHeader Config handle for library and services. + * + */ +VOID +F10PmDualPlaneOnlySupport ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParamsPtr, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + AP_TASK TaskPtr; + UINT32 CPB; + UINT32 Core; + UINT32 Pvimode; + UINT32 LowestPsEn; + UINT32 LocalPciRegister; + UINT32 ActiveCores; + UINT32 ProcessorPackageType; + PCI_ADDR PciAddress; + CPUID_DATA CpuidData; + CPU_LOGICAL_ID LogicalId; + + OptionMultiSocketConfiguration.GetCurrPciAddr (&PciAddress, StdHeader); + + // get the package type + ProcessorPackageType = LibAmdGetPackageType (StdHeader); + GetLogicalIdOfCurrentCore (&LogicalId, StdHeader); + if (((LogicalId.Revision & (AMD_F10_Cx | AMD_F10_Ex)) != 0) && ((ProcessorPackageType & PACKAGE_TYPE_AM2R2_AM3) != 0)) { + PciAddress.AddressValue = PRCT_INFO_PCI_ADDR; + LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); + PciAddress.AddressValue = PW_CTL_MISC_PCI_ADDR; + LibAmdPciRead (AccessWidth32, PciAddress, &Pvimode, StdHeader); + if ((((LocalPciRegister & 0x80000000) != 0) && (((POWER_CTRL_MISC_REGISTER *) &Pvimode)->PviMode == 0)) + || ((LocalPciRegister & 0x04000000) != 0)) { + CPB = 0; + LibAmdCpuidRead (AMD_CPUID_APM, &CpuidData, StdHeader); + if (((CpuidData.EDX_Reg & 0x00000200) >> 9) == 1) { + CPB = 1; + } + + TaskPtr.FuncAddress.PfApTaskIO = SetPstateMSR; + TaskPtr.ExeFlags = TASK_HAS_OUTPUT | WAIT_FOR_CORE; + TaskPtr.DataTransfer.DataTransferFlags = 0; + TaskPtr.DataTransfer.DataSizeInDwords = 1; + TaskPtr.DataTransfer.DataPtr = &CPB; + + GetActiveCoresInCurrentSocket (&ActiveCores, StdHeader); + for (Core = 1; Core < (UINT8) ActiveCores; ++Core) { + ApUtilRunCodeOnSocketCore ((UINT8)0, (UINT8)Core, &TaskPtr, StdHeader); + } + LowestPsEn = ApUtilTaskOnExecutingCore (&TaskPtr, StdHeader, (VOID *) CpuEarlyParamsPtr); + + PciAddress.AddressValue = CPTC2_PCI_ADDR; + LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); + ((CLK_PWR_TIMING_CTRL2_REGISTER *) &LocalPciRegister)->PstateMaxVal = LowestPsEn; + LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); + + PciAddress.AddressValue = POPUP_PSTATE_PCI_ADDR; + LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); + ((POPUP_PSTATE_REGISTER *) &LocalPciRegister)->PopDownPstate = LowestPsEn; + LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); + + PciAddress.AddressValue = HTC_PCI_ADDR; + LibAmdPciRead (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); + ((HTC_REGISTER *) &LocalPciRegister)->HtcPstateLimit = LowestPsEn; + LibAmdPciWrite (AccessWidth32, PciAddress, &LocalPciRegister, StdHeader); + } + } +} +/*---------------------------------------------------------------------------------------*/ +/** + * Set P-State MSR. + * + * This function set the P-state MSRs per each core in the system. + * + * @param[in] CPB Contains the value of Asymmetric Boost register + * @param[in] StdHeader Config handle for library and services + * + * @return Return the lowest-performance enabled P-state + */ +UINT32 +STATIC +SetPstateMSR ( + IN VOID *CPB, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 dtemp; + UINT32 LowestPsEn; + UINT64 MsrValue; + UINT64 MinMsrValue; + + if (*(UINT32*) CPB != 0) { + LibAmdMsrRead (MSR_PSTATE_1, &MinMsrValue, StdHeader); + LibAmdMsrRead (MSR_PSTATE_4, &MsrValue, StdHeader); + LibAmdMsrWrite (MSR_PSTATE_1, &MsrValue, StdHeader); + LibAmdMsrWrite (MSR_PSTATE_4, &MinMsrValue, StdHeader); + } else { + LibAmdMsrRead (MSR_PSTATE_4, &MsrValue, StdHeader); + LibAmdMsrWrite (MSR_PSTATE_0, &MsrValue, StdHeader); + MsrValue = 0; + LibAmdMsrWrite (MSR_PSTATE_4, &MsrValue, StdHeader); + } + + LowestPsEn = 0; + for (dtemp = MSR_PSTATE_0; dtemp <= MSR_PSTATE_4; dtemp++) { + LibAmdMsrRead (dtemp, &MsrValue, StdHeader); + if (((PSTATE_MSR *) &MsrValue)->IddValue != 0) { + MsrValue = MsrValue | BIT63; + LibAmdMsrWrite (dtemp, &MsrValue, StdHeader); + LowestPsEn = dtemp - MSR_PSTATE_0; + } + } + return (LowestPsEn); +} + |