diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/Legacy/agesa.inc')
| -rw-r--r-- | src/vendorcode/amd/agesa/f15/Legacy/agesa.inc | 2989 |
1 files changed, 0 insertions, 2989 deletions
diff --git a/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc b/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc deleted file mode 100644 index 617be484b0..0000000000 --- a/src/vendorcode/amd/agesa/f15/Legacy/agesa.inc +++ /dev/null @@ -1,2989 +0,0 @@ -; **************************************************************************** -; * -; * @file -; * -; * Agesa structures and definitions -; * -; * Contains AMD AGESA core interface -; * -; * @xrefitem bom "File Content Label" "Release Content" -; * @e project: AGESA -; * @e sub-project: Include -; * @e \$Revision: 60222 $ @e \$Date: 2011-10-10 23:39:36 -0600 (Mon, 10 Oct 2011) $ -; -; **************************************************************************** -; * -; * Copyright (C) 2012 Advanced Micro Devices, Inc. -; * All rights reserved. -; * -; * Redistribution and use in source and binary forms, with or without -; * modification, are permitted provided that the following conditions are met: -; * * Redistributions of source code must retain the above copyright -; * notice, this list of conditions and the following disclaimer. -; * * Redistributions in binary form must reproduce the above copyright -; * notice, this list of conditions and the following disclaimer in the -; * documentation and/or other materials provided with the distribution. -; * * Neither the name of Advanced Micro Devices, Inc. nor the names of -; * its contributors may be used to endorse or promote products derived -; * from this software without specific prior written permission. -; * -; * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -; * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -; * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -; * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -; * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -; * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -; * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -; * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -; * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -; * -; * -; ************************************************************************** - -INCLUDE amd.inc -UINT64 TEXTEQU <QWORD> -UINT32 TEXTEQU <DWORD> -UINT16 TEXTEQU <WORD> -UINT8 TEXTEQU <BYTE> -CHAR8 TEXTEQU <BYTE> -BOOLEAN TEXTEQU <BYTE> -POINTER TEXTEQU <DWORD> - - ; AGESA Types and Definitions - - - - ; AGESA BASIC CALLOUTS - AGESA_MEM_RELEASE EQU 00028000h - - ; AGESA ADVANCED CALLOUTS, Processor - AGESA_CHECK_UMA EQU 00028100h - AGESA_DO_RESET EQU 00028101h - AGESA_ALLOCATE_BUFFER EQU 00028102h - AGESA_DEALLOCATE_BUFFER EQU 00028103h - AGESA_LOCATE_BUFFER EQU 00028104h - AGESA_RUNFUNC_ONAP EQU 00028105h - - ; AGESA ADVANCED CALLOUTS, HyperTransport - - ; AGESA ADVANCED CALLOUTS, Memory - AGESA_READ_SPD EQU 00028140h - AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h - AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h - AGESA_READ_SPD_RECOVERY EQU 00028143h - AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h - AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h - AGESA_EXTERNAL____TRAIN_VREF_CHANGE EQU 00028146h - - ; AGESA IDS CALLOUTS - AGESA_GET_IDS_INIT_DATA EQU 00028200h - - ; AGESA GNB CALLOUTS - AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h - - ; AGESA FCH CALLOUTS - AGESA_FCH_OEM_CALLOUT EQU 00028401h - -; ------------------------------------------------------------------------ - - ; HyperTransport Interface - - - -; ----------------------------------------------------------------------------- - ; HT DEFINITIONS AND MACROS - -; ----------------------------------------------------------------------------- - - - ; Width equates for call backs - HT_WIDTH_8_BITS EQU 8 - HT_WIDTH_16_BITS EQU 16 - HT_WIDTH_4_BITS EQU 4 - HT_WIDTH_2_BITS EQU 2 - HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS - - ; Frequency Limit equates for call backs which take a frequency supported mask. - HT_FREQUENCY_LIMIT_200M EQU 1 - HT_FREQUENCY_LIMIT_400M EQU 7 - HT_FREQUENCY_LIMIT_600M EQU 1Fh - HT_FREQUENCY_LIMIT_800M EQU 3Fh - HT_FREQUENCY_LIMIT_1000M EQU 7Fh - HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh - HT_FREQUENCY_LIMIT_1200M EQU 0FFh - HT_FREQUENCY_LIMIT_1400M EQU 1FFh - HT_FREQUENCY_LIMIT_1600M EQU 3FFh - HT_FREQUENCY_LIMIT_1800M EQU 7FFh - HT_FREQUENCY_LIMIT_2000M EQU 0FFFh - HT_FREQUENCY_LIMIT_2200M EQU 1FFFh - HT_FREQUENCY_LIMIT_2400M EQU 3FFFh - HT_FREQUENCY_LIMIT_2600M EQU 7FFFh - HT_FREQUENCY_LIMIT_2800M EQU 27FFFh - HT_FREQUENCY_LIMIT_3000M EQU 67FFFh - HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh - HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh - HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M - HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh - - ; Unit ID Clumping special values - HT_CLUMPING_DISABLE EQU 00000000h - HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh - - HT_LIST_TERMINAL EQU 0FFh - HT_LIST_MATCH_ANY EQU 0FEh - HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh - - ; Event Notify definitions - - ; Event definitions. - - ; Coherent subfunction events - HT_EVENT_COH_EVENTS EQU 10001000h - HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h - HT_EVENT_COH_OBSOLETE000 EQU 10021000h - HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h - HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h - HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h - - ; Non-coherent subfunction events - HT_EVENT_NCOH_EVENTS EQU 10002000h - HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h - HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h - HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h - HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h - HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h - HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h - - ; Optimization subfunction events - HT_EVENT_OPT_EVENTS EQU 10003000h - HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h - HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h - HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h - HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h - - ; HW Fault events - HT_EVENT_HW_EVENTS EQU 10004000h - HT_EVENT_HW_SYNCFLOOD EQU 10014000h - HT_EVENT_HW_HTCRC EQU 10024000h - - ; The Recovery HT component uses 0x10005000 for events. - ; For consistency, we avoid that range here. - - HT_MAX_NC_BUIDS EQU 32 -; ---------------------------------------------------------------------------- - ; HT TYPEDEFS, STRUCTURES, ENUMS - -; ---------------------------------------------------------------------------- -MATCHED EQU 0 ; < The link matches the requested customization. -POWERED_OFF EQU 1 ; < Power the link off. -UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. -MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. -FINAL_LINK_STATE TEXTEQU <DWORD> - - ; Swap a device from its current id to a new one. - -BUID_SWAP_ITEM STRUCT - FromId UINT8 ? ; < The device responding to FromId, - ToId UINT8 ? ; < will be moved to ToId. -BUID_SWAP_ITEM ENDS - - - ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, - ; the final in order list of device ids is provided. (There can be more swaps than devices.) - ; The unused entries in both are filled with 0xFF. - -BUID_SWAP_LIST STRUCT - Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform - FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps -BUID_SWAP_LIST ENDS - - - ; Control Manual Initialization of Non-Coherent Chains - - ; This interface is checked every time a non-coherent chain is - ; processed. BUID assignment may be controlled explicitly on a - ; non-coherent chain. Provide a swap list. Swaps controls the - ; BUID assignment and FinalIds provides the device to device - ; Linking. Device orientation can be detected automatically, or - ; explicitly. See interface documentation for more details. - - ; If a manual swap list is not supplied, - ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - ; based on each device's unit count. - -MANUAL_BUID_SWAP_LIST STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SwapList BUID_SWAP_LIST {} ; < The swap list -MANUAL_BUID_SWAP_LIST ENDS - - - ; Override options for DEVICE_CAP_OVERRIDE. - - ; Specify which override actions should be performed. For Checks, 1 means to check the item - ; and 0 means to skip the check. For the override options, 1 means to apply the override and - ; 0 means to ignore the override. - -DEVICE_CAP_OVERRIDE_OPTIONS STRUCT - IsCheckDevVenId UINT32 ? -; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id -; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision -; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In -; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out -; IN UINT32 IsOverrideFreq:1; ; < Override Frequency -; IN UINT32 IsOverrideClumping:1; ; < Override Clumping -; IN UINT32 IsDoCallout:1; ; < Make the optional callout -DEVICE_CAP_OVERRIDE_OPTIONS ENDS - - ; Override capabilities of a device. - - ; This interface is checked once for every Link on every IO device. - ; Provide the width and frequency capability if needed for this device. - ; This is used along with device capabilities, the limit interfaces, and northbridge - ; limits to compute the default settings. The components of the device's PCI config - ; address are provided, so its settings can be consulted if need be. - ; The optional callout is a catch all. - -DEVICE_CAP_OVERRIDE STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. - ; Override fields - LinkWidthIn UINT8 ? ; < modify to change the Link Width In. - LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. - FreqCap UINT32 ? ; < modify to change the Link's frequency capability. - Clumping UINT32 ? ; < modify to change Unit ID clumping support. - Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. -DEVICE_CAP_OVERRIDE ENDS - - ; Callout param struct for override capabilities of a device. - - ; If the optional callout is implemented this param struct is passed to it. - -DEVICE_CAP_CALLOUT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The header - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this chain is located. - HostLink UINT8 ? ; < The Link on the host for this chain. - Depth UINT8 ? ; < The Depth in the I/O chain from the Host. - DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). - Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). - Link UINT8 ? ; < The Device's Link number (0 or 1). - PciAddress PCI_ADDR {} ; < The Device's PCI Address. - ; Override fields - LinkWidthIn POINTER ? ; < modify to change the Link Width In. - LinkWidthOut POINTER ? ; < modify to change the Link Width Out. - FreqCap POINTER ? ; < modify to change the Link's frequency capability. - Clumping POINTER ? ; < modify to change Unit ID clumping support. -DEVICE_CAP_CALLOUT_PARAMS ENDS - - ; Limits for CPU to CPU Links. - - ; For each coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with CPU device capabilities and northbridge limits - ; to compute the default settings. - -CPU_TO_CPU_PCB_LIMITS STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Limit fields - ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B - BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -CPU_TO_CPU_PCB_LIMITS ENDS - - ; Get limits for non-coherent Links. - - ; For each non-coherent connection this interface is checked once. - ; Provide the frequency and width if needed for this Link (usually based on board - ; restriction). This is used with device capabilities, device overrides, and northbridge limits - ; to compute the default settings. - -IO_PCB_LIMITS STRUCT - ; Match fields - HostSocket UINT8 ? ; < The Socket on which this Link is located - HostLink UINT8 ? ; < The Link about to be initialized - Depth UINT8 ? ; < The Depth in the I/O chain from the Host - ; Limit fields - DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor - UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor - PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability -IO_PCB_LIMITS ENDS - - ; Manually control bus number assignment. - - ; This interface is checked every time a non-coherent chain is processed. - ; If a system can not use the auto Bus numbering feature for non-coherent chain bus - ; assignments, this interface can provide explicit control. For each chain, provide - ; the bus number range to use. - -OVERRIDE_BUS_NUMBERS STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this chain is located - Link UINT8 ? ; < The Link on the host for this chain - ; Override fields - SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain - SubBus UINT8 ? ; < Subordinate Bus number -OVERRIDE_BUS_NUMBERS ENDS - - - ; Ignore a Link. - - ; This interface is checked every time a coherent Link is found and then every - ; time a non-coherent Link from a CPU is found. - ; Any coherent or non-coherent Link from a CPU can be ignored and not used - ; for discovery or initialization. Useful for connection based systems. - ; (Note: not checked for IO device to IO Device Links.) - -IGNORE_LINK STRUCT - ; Match fields - Socket UINT8 ? ; < The Socket on which this Link is located - Link UINT8 ? ; < The Link about to be initialized - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. -IGNORE_LINK ENDS - - - ; Skip reganging of subLinks. - - ; This interface is checked whenever two subLinks are both connected to the same CPUs. - ; Normally, unganged sublinks between the same two CPUs are reganged. - ; Provide a matching structure to leave the Links unganged. - -SKIP_REGANG STRUCT - ; Match fields - SocketA UINT8 ? ; < One Socket on which this Link is located - LinkA UINT8 ? ; < The Link on this Node - SocketB UINT8 ? ; < The other Socket on which this Link is located - LinkB UINT8 ? ; < The Link on that Node - ; Customization fields - LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. -SKIP_REGANG ENDS - - ; The System Socket layout, which sockets are physically connected. - - ; The hardware method for Socket naming is preferred. Use this software method only - ; if required. - -SYSTEM_PHYSICAL_SOCKET_MAP STRUCT - CurrentSocket UINT8 ? ; < The socket from which this connection originates. - CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. - TargetSocket UINT8 ? ; < The target socket which is connected on that link. -SYSTEM_PHYSICAL_SOCKET_MAP ENDS - -; ---------------------------------------------------------------------------- - - ; This is the input structure for AmdHtInitialize. - -AMD_HT_INTERFACE STRUCT - ; Basic level customization - AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. - AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. - AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. - - ; Advanced Level Customization - ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. - DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. - CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. - IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. - OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. - ; < Use either auto bus numbering or override bus - ; < numbers, not both. - - IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. - SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. - - ; Expert Level Customization - Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. - SystemPhysicalSocketMap POINTER ? - ; < The hardware socket naming method is preferred, - ; < If it can't be used, this provides a software method. -AMD_HT_INTERFACE ENDS - -; ----------------------------------------------------------------------------- - - ; HT Recovery Interface - - - -; ----------------------------------------------------------------------------- -; * HT Recovery DEFINITIONS AND MACROS -; * -; *----------------------------------------------------------------------------- -; - - ; BBHT subfunction events - HT_EVENT_BB_EVENTS EQU 10005000h - HT_EVENT_BB_BUID_EXCEED EQU 10015000h - HT_EVENT_BB_DEVICE_FAILED EQU 10055000h - HT_EVENT_BB_AUTO_DEPTH EQU 10065000h - -; ---------------------------------------------------------------------------- -; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS -; * -; *---------------------------------------------------------------------------- -; - - - ; The Interface structure to Recovery HT. - -AMD_HT_RESET_INTERFACE STRUCT - ManualBuidSwapList POINTER ? ; < Option to manually control SB link init - Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, - ; < else, for manual init unmodified. -AMD_HT_RESET_INTERFACE ENDS - - -;----------------------------------------------------------------------------- -; FCH DEFINITIONS AND MACROS -; -;----------------------------------------------------------------------------- - -; Configuration values for SdConfig - SdDisable EQU 0 ; Disabled - SdAmda EQU 1 ; AMDA, set 24,18,16, default - SdDma EQU 2 ; DMA clear 24, 16, set 18 - SdPio EQU 3 ; PIO clear 24,18,16 -SD_MODE TEXTEQU <DWORD> - -; Configuration values for SdClockControl - Sd50MhzTraceCableLengthWithinSixInches EQU 4 ; 50Mhz, default - Sd40MhzTraceCableLengthSix2ElevenInches EQU 6 ; 40Mhz - Sd25MhzTraceCableLengthEleven2TwentyfourInches EQU 7 ; 25Mhz -SD_CLOCK_CONTROL TEXTEQU <DWORD> - -; Configuration values for AzaliaController - AzAuto EQU 0 ; Auto - Detect Azalia controller automatically - AzDisable EQU 1 ; Diable - Disable Azalia controller - AzEnable EQU 2 ; Enable - Enable Azalia controller -HDA_CONFIG TEXTEQU <DWORD> - -; Configuration values for IrConfig - IrDisable EQU 0 ; Disable - IrRxTx0 EQU 1 ; Rx and Tx0 - IrRxTx1 EQU 2 ; Rx and Tx1 - IrRxTx0Tx1 EQU 3 ; Rx and both Tx0,Tx1 -IR_CONFIG TEXTEQU <DWORD> - -; Configuration values for SataClass - SataNativeIde EQU 0 ; Native IDE mode - SataRaid EQU 1 ; RAID mode - SataAhci EQU 2 ; AHCI mode - SataLegacyIde EQU 3 ; Legacy IDE mode - SataIde2Ahci EQU 4 ; IDE->AHCI mode - SataAhci7804 EQU 5 ; AHCI mode as 7804 ID (AMD driver) - SataIde2Ahci7804 EQU 6 ; IDE->AHCI mode as 7804 ID (AMD driver) -SATA_CLASS TEXTEQU <DWORD> - -; Configuration values for GppLinkConfig - PortA4 EQU 0 ; 4:0:0:0 - PortA2B2 EQU 2 ; 2:2:0:0 - PortA2B1C1 EQU 3 ; 2:1:1:0 - PortA1B1C1D1 EQU 4 ; 1:1:1:1 -GPP_LINKMODE TEXTEQU <DWORD> - -; Configuration values for FchPowerFail - AlwaysOff EQU 0 ; Always power off after power resumes - AlwaysOn EQU 1 ; Always power on after power resumes - UsePrevious EQU 3 ; Resume to same setting when power fails -POWER_FAIL TEXTEQU <DWORD> - -; Configuration values for SATA Link Speed - Gen1 EQU 1 ; SATA port GEN1 speed - Gen2 EQU 2 ; SATA port GEN2 speed - Gen3 EQU 3 ; SATA port GEN3 speed -SATA_SPEED TEXTEQU <DWORD> - -; Configuration values for GPIO function - Function0 EQU 0 ; GPIO Function 1 - Function1 EQU 1 ; GPIO Function 1 - Function2 EQU 2 ; GPIO Function 2 - Function3 EQU 3 ; GPIO Function 3 -GPIO_FUN TEXTEQU <DWORD> - -; Configuration values for GPIO_CFG - OwnedByEc EQU 1 ; This bit can only be written by EC - OwnedByHost EQU 2 ; This bit can only be written by host (BIOS) - Sticky EQU 4 ; If set, [6:3] are sticky - PullUpB EQU 8 ; 0: Pullup enable; 1: Pullup disabled - PullDown EQU 16 ; 0: Pulldown disabled; 1: Pulldown enable - GpioOutEnB EQU 32 ; 0: Output enable; 1: Output disable - GpioOut EQU 64 ; Output state when GpioOutEnB is 0 - GpioIn EQU 128 ; This bit is read only - current pin state -CFG_BYTE TEXTEQU <DWORD> - -; FCH GPIO CONTROL -GPIO_CONTROL STRUCT - GpioPin UINT8 ? ; Gpio Pin, valid range: 0-67, 128-150, 160-228 - PinFunction GPIO_FUN ? ; Multi-function selection - CfgByte CFG_BYTE ? ; GPIO Register value -GPIO_CONTROL ENDS - -; FCH SCI MAP CONTROL -SCI_MAP_CONTROL STRUCT - InputPin UINT8 ? ; Input Pin, valid range 0-63 - GpeMap UINT8 ? ; Gpe Map, valid range 0-31 -SCI_MAP_CONTROL ENDS - -; FCH SATA PHY CONTROL -SATA_PHY_CONTROL STRUCT - CommonPhy BOOLEAN ? ; Common PHY or not - Gen SATA_SPEED ? ; SATA speed - Port UINT8 ? ; Port number, valid range: 0-7 - PhyData UINT32 ? ; SATA PHY data, valid range: 0-0xFFFFFFFF -SATA_PHY_CONTROL ENDS - -; -; FCH Component Data Structure in InitReset stage -; -FCH_RESET_INTERFACE STRUCT - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - - Xhci0Enable BOOLEAN ? ; XHCI0 controller function - ; FALSE - XHCI0 controller disabled - ; TRUE - XHCI0 controller enabled - - Xhci1Enable BOOLEAN ? ; XHCI1 controller function - ; FALSE - XHCI1 controller disabled - ; TRUE - XHCI1 controller enabled - -FCH_RESET_INTERFACE ENDS - - -; -; FCH Component Data Structure from InitEnv stage -; -FCH_INTERFACE STRUCT - SdConfig SD_MODE ? ; Secure Digital (SD) controller mode - AzaliaController HDA_CONFIG ? ; Azalia HD Audio Controller - IrConfig IR_CONFIG ? ; Infrared (IR) Configuration - UmiGen2 BOOLEAN ? ; Enable Gen2 data rate of UMI - ; FALSE - Disable Gen2 - ; TRUE - Enable Gen2 - SataClass SATA_CLASS ? ; SATA controller mode - SataEnable BOOLEAN ? ; SATA controller function - ; FALSE - SATA controller is disabled - ; TRUE - SATA controller is enabled - IdeEnable BOOLEAN ? ; SATA IDE controller mode enabled/disabled - ; FALSE - IDE controller is disabled - ; TRUE - IDE controller is enabled - SataIdeMode BOOLEAN ? ; Native mode of SATA IDE controller - ; FALSE - Legacy IDE mode - ; TRUE - Native IDE mode - Ohci1Enable BOOLEAN ? ; OHCI controller #1 Function - ; FALSE - OHCI1 is disabled - ; TRUE - OHCI1 is enabled - Ohci2Enable BOOLEAN ? ; OHCI controller #2 Function - ; FALSE - OHCI2 is disabled - ; TRUE - OHCI2 is enabled - Ohci3Enable BOOLEAN ? ; OHCI controller #3 Function - ; FALSE - OHCI3 is disabled - ; TRUE - OHCI3 is enabled - Ohci4Enable BOOLEAN ? ; OHCI controller #4 Function - ; FALSE - OHCI4 is disabled - ; TRUE - OHCI4 is enabled - XhciSwitch BOOLEAN ? ; XHCI controller Function - ; FALSE - XHCI is disabled - ; TRUE - XHCI is enabled - GppEnable BOOLEAN ? ; Master switch of GPP function - ; FALSE - GPP disabled - ; TRUE - GPP enabled - FchPowerFail POWER_FAIL ? ; FCH power failure option -FCH_INTERFACE ENDS - - -; --------------------------------------------------------------------------- -; CPU Feature related info -; --------------------------------------------------------------------------- - ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE - C1eModeDisabled EQU 0 ; < Disabled - C1eModeAuto EQU 1 ; < Auto mode enables the best C1e method for the - ; < currently installed processor - C1eModeHardware EQU 2 ; < Hardware method - C1eModeMsgBased EQU 3 ; < Message-based method - C1eModeSoftwareDeprecated EQU 4 ; < Deprecated software SMI method - C1eModeHardwareSoftwareDeprecated EQU 5 ; < Hardware or Deprecated software SMI method - MaxC1eMode EQU 6 ; < Not a valid value, used for verifying input -PLATFORM_C1E_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE - CStateModeDisabled EQU 0 ; < Disabled - CStateModeC6 EQU 1 ; < C6 State - MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CSTATE_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE - CpbModeAuto EQU 0 ; < Auto - CpbModeDisabled EQU 1 ; < Disabled - MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_CPB_MODES TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE - LOW_POWER_PSTATE_FOR_PROCHOT_AUTO EQU 0 ; < Auto - LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE EQU 1 ; < Disabled - MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE EQU 2 ; < Not a valid value, used for verifying input -PLATFORM_LOW_POWER_PSTATE_MODES TEXTEQU <DWORD> - -;---------------------------------------------------------------------------- -; GNB PCIe configuration info -;---------------------------------------------------------------------------- - -GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid -GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported -GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address -GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration -GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link -GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes -GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported -GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail -GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training -GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training - -DESCRIPTOR_TERMINATE_LIST EQU 80000000h -DESCRIPTOR_IGNORE EQU 40000000h - -PCIe_PORT_MISC_CONTROL STRUCT - LinkComplianceMode UINT8 ? - ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern) -PCIe_PORT_MISC_CONTROL ENDS - -PCIe_PORT_DATA STRUCT - PortPresent UINT8 ? ; < Enable PCIe port for initialization. - ChannelType UINT8 ? ; < Channel type. - ; 0 - "lowLoss", - ; 1 - "highLoss", - ; 2 - "mob0db", - ; 3 - "mob3db", - ; 4 - "extnd6db" - ; 5 - "extnd8db" - ; - DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. - FunctionNumber UINT8 ? ; < Reserved for future use - LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability - ; 0 - Maximum supported by silicon - ; 1 - Gen1 - ; 2 - Gen2 - ; 3 - Gen3 - ; - LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) - ; 0 - Disabled - ; 1 - L0s only - ; 2 - L1 only - ; 2 - L0s and L1 - ; - LinkHotplug UINT8 ? ; < Hotplug control. - ; 0 - Disabled - ; 1 - Basic - ; 2 - Server - ; 3 - Enhanced - ; - ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO - ; identification which control reset for given port. - ; Each port with unique GPIO should have unique ResetId assigned. - ; All ports use same GPIO to control reset should have same ResetId assigned. - ; see AgesaPcieSlotResetControl - ; - MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls -PCIe_PORT_DATA ENDS - -;DDI channel lane mapping - -CHANNEL_MAPPING STRUCT ; - Lane0 UINT8 ? ; - ;IN UINT8 Lane0 :2; ; - ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") - ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") -CHANNEL_MAPPING ENDS ; - -CONN_CHANNEL_MAPPING UNION - ChannelMappingValue UINT8 ? ; < Raw lane mapping - ChannelMapping CHANNEL_MAPPING {} ; -CONN_CHANNEL_MAPPING ENDS ; - -; DDI Configuration -PCIe_DDI_DATA STRUCT - ConnectorType UINT8 ? ; < Display Connector Type - ; 0 - DP - ; 1 - eDP - ; 2 - Single Link DVI - ; 3 - Dual Link DVI - ; 4 - HDMI - ; 5 - Travis DP-to-VGA - ; 6 - Travis DP-to-LVDS - ; 7 - Hudson-2 NutMeg DP-to-VGA - ; 8 - Single Link DVI-I - ; 9 - CRT (VGA) - ; 10 - LVDS - ; 11 - VBIOS auto detect connector type - AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used - ; 0 - AUX1 - ; 1 - AUX2 - ; 2 - AUX3 - ; 3 - AUX4 - ; 4 - AUX5 - ; 5 - AUX6 - ; - HdpIndex UINT8 ? ; < Indicates which HDP pin is used - ; 0 - HDP1 - ; 1 - HDP2 - ; 2 - HDP3 - ; 3 - HDP4 - ; 4 - HDP5 - ; 5 - HDP6 - Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins - ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane - ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only - ;applicable for Dual DDI link) - ;if Mapping[x] set to 0 than default mapping assumed - LanePnInversionMask UINT8 ? ; < Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port - ; 0 - Do not invert (default) - ; 1 - Invert P and N on this lane -PCIe_DDI_DATA ENDS - - -; Engine Configuration -PCIe_ENGINE_DATA STRUCT - EngineType UINT8 ? ; < Engine type - ; 0 - Ignore engine configuration - ; 1 - PCIe port - ; 2 - DDI - StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). - EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). -PCIe_ENGINE_DATA ENDS - -; PCIe port descriptor -PCIe_PORT_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in complex - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info -PCIe_PORT_DESCRIPTOR ENDS - -; DDI descriptor -PCIe_DDI_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - EngineData PCIe_ENGINE_DATA {} ; < Engine data - Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info -PCIe_DDI_DESCRIPTOR ENDS - -; Slot Reset Info -PCIe_SLOT_RESET_INFO STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR - ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL -PCIe_SLOT_RESET_INFO ENDS - - -; PCIe Complex descriptor -PCIe_COMPLEX_DESCRIPTOR STRUCT - Flags UINT32 ? ; < Descriptor flags - ; Bit31 - last descriptor in topology - ; - ; - SocketId UINT32 ? ; < Socket Id - PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). - Reserved POINTER ? ;< Reserved for future use -PCIe_COMPLEX_DESCRIPTOR ENDS - - AssertSlotReset EQU 0 - DeassertSlotReset EQU 1 -PCIE_RESET_CONTROL TEXTEQU <DWORD> - - PcieUnusedEngine EQU 0 - PciePortEngine EQU 1 - PcieDdiEngine EQU 2 - MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input -PCIE_ENGINE_TYPE TEXTEQU <DWORD> - - PcieGenMaxSupported EQU 0 - PcieGen1 EQU 1 - PcieGen2 EQU 2 - MaxPcieGen EQU 3 ; < Not a valid value, used for verifying input -PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> - - PsppDisabled EQU 0 - PsppPerformance EQU 1 - PsppBalanceHigh EQU 2 - PsppBalanceLow EQU 3 - PsppPowerSaving EQU 4 - MaxPspp EQU 5 ; < Not a valid value, used for verifying input -PCIE_PSPP_POLICY TEXTEQU <DWORD> - - ConnectorTypeDP EQU 0 - ConnectorTypeEDP EQU 1 - ConnectorTypeSingleLinkDVI EQU 2 - ConnectorTypeDualLinkDVI EQU 3 - ConnectorTypeHDMI EQU 4 - ConnectorTypeTravisDpToVga EQU 5 - ConnectorTypeTravisDpToLvds EQU 6 - ConnectorTypeNutmegDpToVga EQU 7 - ConnectorTypeSingleLinkDviI EQU 8 - ConnectorTypeCrt EQU 9 - ConnectorTypeLvds EQU 10 - ConnectorTypeAutoDetect EQU 11 - MaxConnectorType EQU 12 ; < Not a valid value, used for verifying input -PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> - - ChannelTypeLowLoss EQU 0 - ChannelTypeHighLoss EQU 1 - ChannelTypeMob0db EQU 2 - ChannelTypeMob3db EQU 3 - ChannelTypeExt6db EQU 4 - ChannelTypeExt8db EQU 5 - MaxChannelType EQU 6 ; < Not a valid value, used for verifying input -PCIE_CHANNEL_TYPE TEXTEQU <DWORD> - - AspmDisabled EQU 0 - AspmL0s EQU 1 - AspmL1 EQU 2 - AspmL0sL1 EQU 3 - MaxAspm EQU 4 ; < Not a valid value, used for verifying input -PCIE_ASPM_TYPE TEXTEQU <DWORD> - - HotplugDisabled EQU 0 - HotplugBasic EQU 1 - HotplugServer EQU 2 - HotplugEnhanced EQU 3 - HotplugInboard EQU 4 - MaxHotplug EQU 5 ; < Not a valid value, used for verifying input -PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> - - PortDisabled EQU 0 - PortEnabled EQU 1 -PCIE_PORT_ENABLE TEXTEQU <DWORD> - - Aux1 EQU 0 - Aux2 EQU 1 - Aux3 EQU 2 - Aux4 EQU 3 - Aux5 EQU 4 - Aux6 EQU 5 - MaxAux EQU 6 ; < Not a valid value, used for verifying input -PCIE_AUX_TYPE TEXTEQU <DWORD> - - Hdp1 EQU 0 - Hdp2 EQU 1 - Hdp3 EQU 2 - Hdp4 EQU 3 - Hdp5 EQU 4 - Hdp6 EQU 5 - MaxHdp EQU 6 ; < Not a valid value, used for verifying input -PCIE_HDP_TYPE TEXTEQU <DWORD> - - -;IOMMU requestor ID -IOMMU_REQUESTOR_ID STRUCT - Bus UINT16 ? ; <[15:8] - Bus number, [7:3] - Device number, [2:0] - Function number -IOMMU_REQUESTOR_ID ENDS - -;IVMD exclusion range descriptor -IOMMU_EXCLUSION_RANGE_DESCRIPTOR STRUCT - Flags UINT32 ? ; Descriptor flags - ; @li @b Flags[31] - Terminate descriptor array. - ; @li @b Flags[30] - Ignore descriptor. - RequestorIdStart IOMMU_REQUESTOR_ID {} ; Requestor ID start - RequestorIdEnd IOMMU_REQUESTOR_ID {} ; Requestor ID end (use same as start for single ID) - RangeBaseAddress UINT64 ? ; Phisical base address of exclusion range - RangeLength UINT64 ? ; Length of exclusion range in bytes -IOMMU_EXCLUSION_RANGE_DESCRIPTOR ENDS - -;---------------------------------------------------------------------------- -; GNB configuration info -;---------------------------------------------------------------------------- -; - -; LVDS Misc Control Field -LVDS_MISC_CONTROL_FIELD STRUCT - FpdiMode UINT8 ? - ;IN UINT8 FpdiMode:1; - ;IN UINT8 DlChSwap:1; - ;IN UINT8 VsyncActiveLow:1; - ;IN UINT8 HsyncActiveLow:1; - ;IN UINT8 BLONActiveLow:1; - ;IN UINT8 Reserved:3; -LVDS_MISC_CONTROL_FIELD ENDS - -; LVDS Misc Control -LVDS_MISC_CONTROL UNION - Field LVDS_MISC_CONTROL_FIELD {} - Value UINT8 ? -LVDS_MISC_CONTROL ENDS - -; Configuration settings for GNB. -GNB_ENV_CONFIGURATION STRUCT - Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID. - ; @li 0 = Stereo 3D is disabled (default). - ; @li 1 = Use processor pin HPD1. - ; @li 2 = Use processor pin HPD2 - ; @li 3 = Use processor pin HPD3 - ; @li 4 = Use processor pin HPD4 - ; @li 5 = Use processor pin HPD5 - ; @li 6 = Use processor pin HPD6 - IommuSupport BOOLEAN ? ; IOMMU support. - ; TRUE = Disable and hide IOMMU device. - ; FLASE = Initialize IOMMU subsystem. Generate ACPI IVRS table. - LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz - LvdsPowerOnSeqDigonToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqDeToDigon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToDe UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqOnToOffDelay UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqVaryBlToBlon UINT8 ? ; This item configures panel initialization timing. - LvdsPowerOnSeqBlonToVaryBl UINT8 ? ; This item configures panel initialization timing. - LvdsMaxPixelClockFreq UINT16 ? ; This item configures the maximum pixel clock frequency supported. - LcdBitDepthControlValue UINT32 ? ; This item configures the LCD bit depth control settings. - Lvds24bbpPanelMode UINT8 ? ; This item configures the LVDS 24 BBP mode. - LvdsMiscControl LVDS_MISC_CONTROL {} ; This item configures LVDS swap/Hsync/Vsync/BLON - PcieRefClkSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % - GnbRemoteDisplaySupport BOOLEAN ? ; This item enables Wireless Display Support -GNB_ENV_CONFIGURATION ENDS - -; GNB configuration info -GNB_CONFIGURATION STRUCT - PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. - ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST - ; - ; - ; - ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following - ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR - ; defined in arbitrary sequence: - ; Example of topology definition for single socket system: - ; PlatfromTopology LABEL DWORD - ; - ; Port0_2 PCIe_PORT_DESCRIPTOR <>; - ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; - ; ... - ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; - ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; - ; ... - ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> - ; - ; - PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) - ; @li @b 0 - Disabled - ; @li @b 1 - Performance - ; @li @b 2 - Balance-High - ; @li @b 3 - Balance-Low - ; @li @b 4 - Power Saving - ; -GNB_CONFIGURATION ENDS - - -; --------------------------------------------------------------------------- - -; MEMORY-SPECIFIC DATA STRUCTURES - -; --------------------------------------------------------------------------- - - - ; AGESA MAXIMIUM VALUES - - ; These Max values are used to define array sizes and associated loop - ; counts in the code. They reflect the maximum values that AGESA - ; currently supports and does not necessarily reflect the hardware - ; capabilities of configuration. - - - MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system - MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets - MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) - NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. - ; < Eg: UINT16 *RcvEnDlys; - ; < UINT8 *WrDqsDlys; - ; < UINT8 *RdDqsDlys; - ; < UINT8 *WrDatDlys; - ; < UINT8 *RdDqsMinDlys; - ; < UINT8 *RdDqsMaxDlys; - ; < UINT8 *WrDatMinDlys; - ; < UINT8 *WrDatMaxDlys; - NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables - MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system - - MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] - MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] - - UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved - UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0 - UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1 - - PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table - - ; AGESA DEFINITIONS - - ; Many of these are derived from the platform and hardware specific definitions - - ; EccSymbolSize override value - ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value - ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 - ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 - ; CPU Package Type - PT_L1 EQU 0 ; < L1 Package type - PT_M2 EQU 1 ; < AM Package type - PT_S1 EQU 2 ; < S1 Package type - - ; Structures use to pass system Logical CPU-ID -CPU_LOGICAL_ID STRUCT - Family UINT64 ? ; < Indicates logical ID Family - Revision UINT64 ? ; < Indicates logical ID Family -CPU_LOGICAL_ID ENDS - - ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE - - AMD_PLATFORM_SERVER EQU 8000h ; < Server - AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop - AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile -AMD_PLATFORM_TYPE TEXTEQU <DWORD> - - ; Dram technology type - - DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology - DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology -TECHNOLOGY_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT - - DDR400_FREQUENCY EQU 200 ; < DDR 400 - DDR533_FREQUENCY EQU 266 ; < DDR 533 - DDR667_FREQUENCY EQU 333 ; < DDR 667 - DDR800_FREQUENCY EQU 400 ; < DDR 800 - DDR1066_FREQUENCY EQU 533 ; < DDR 1066 - DDR1333_FREQUENCY EQU 667 ; < DDR 1333 - DDR1600_FREQUENCY EQU 800 ; < DDR 1600 - DDR1866_FREQUENCY EQU 933 ; < DDR 1866 - DDR2100_FREQUENCY EQU 1050 ; < DDR 2100 - DDR2133_FREQUENCY EQU 1066 ; < DDR 2133 - DDR2400_FREQUENCY EQU 1200 ; < DDR 2400 - UNSUPPORTED_DDR_FREQUENCY EQU 1201 ; < Highest limit of DDR frequency -MEMORY_BUS_SPEED TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE - - QUADRANK_REGISTERED EQU 0 - QUADRANK_UNBUFFERED EQU 1 -QUANDRANK_TYPE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT - - TIMING_MODE_AUTO EQU 0 ; < Use best rate possible - TIMING_MODE_LIMITED EQU 1 ; < Set user top limit - TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed -USER_MEMORY_TIMING_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_POWER_DOWN_MODE - - POWER_DOWN_BY_CHANNEL EQU 0 - POWER_DOWN_BY_CHIP_SELECT EQU 1 - POWER_DOWN_AUTO EQU 2 -POWER_DOWN_MODE TEXTEQU <DWORD> - - ; Low voltage support - - VOLT_INITIAL EQU 0 ; < Initial value for VDDIO - VOLT1_5 EQU 1 ; < 1.5 Volt - VOLT1_35 EQU 2 ; < 1.35 Volt - VOLT1_25 EQU 3 ; < 1.25 Volt - VOLT_UNSUPPORTED EQU 0FFh ; < No common voltage found -DIMM_VOLTAGE TEXTEQU <DWORD> - - ; UMA Mode - - UMA_NONE EQU 0 ; < UMA None - UMA_SPECIFIED EQU 1 ; < UMA Specified - UMA_AUTO EQU 2 ; < UMA Auto -UMA_MODE TEXTEQU <DWORD> - - ; Force Training Mode - - FORCE_TRAIN_1D EQU 0 ; < 1D Training only - FORCE_TRAIN___ EQU 1 ; < - FORCE_TRAIN_AUTO EQU 2 ; < Auto -FORCE_TRAIN_MODE TEXTEQU <DWORD> - -; The possible DRAM prefetch mode settings. - DRAM_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_DRAM_PREFETCH_FOR_IO EQU 1 ; Disable DRAM prefetching for I/O requests only. - DISABLE_DRAM_PREFETCH_FOR_CPU EQU 2 ; Disable DRAM prefetching for requests from processor cores only. - DISABLE_DRAM_PREFETCHER EQU 3 ; Disable DRAM prefetching. - MAX_DRAM_FREFETCH_MODE EQU 4 ; Not a DRAM prefetch mode, use for limit checking. -DRAM_PREFETCH_MODE TEXTEQU <DWORD> - - ; Build Configuration values for BLDCFG_UMA_ALIGNMENT - - NO_UMA_ALIGNED EQU 00FFFFFFh - UMA_4MB_ALIGNED EQU 00FFFFC0h - UMA_128MB_ALIGNED EQU 00FFF800h - UMA_256MB_ALIGNED EQU 00FFF000h - UMA_512MB_ALIGNED EQU 00FFE000h -UMA_ALIGNMENT TEXTEQU <DWORD> - ; =============================================================================== - ; Global MCT Configuration Status Word (GStatus) - ; =============================================================================== - - GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory - GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable - GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. - GsbSoftHole EQU 3 ; < A Node Base gap was created - GsbHWHole EQU 4 ; < A HW dram remap was created - GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled - GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping - GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset - - GsbEOL EQU 8 ; < End of list -GLOBAL_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) -; =============================================================================== - - EsbNoDimms EQU 0 ; < No DIMMs - EsbSpdChkSum EQU 1 ; < SPD Checksum fail - EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch - EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch - EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) - EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info - EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 - EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled - EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled - EsbSpareDis EQU 9 ; < Online spare requested but not enabled - EsbMinimumMode EQU 10 ; < Running in Minimum Mode - EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found - EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) - EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions - EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small - EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled - - EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. - EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since - ; < channel interleaving, bank interleaving, or bank swizzle is enabled. - EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since - ; < memory size of each DCT is not a power of two. - - EsbEOL EQU 19 ; < End of list -ERROR_STATUS_FIELD TEXTEQU <DWORD> - -; =============================================================================== - ; Local Configuration Status (DIE_STRUCT.Status[31:0]) -; =============================================================================== - - SbRegistered EQU 0 ; < All DIMMs are Registered - SbEccDimms EQU 1 ; < All banks ECC capable - SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable - SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode - Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation - Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. - Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. - SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. - SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. - SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag - SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz - SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. - SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support - SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs - SbEOL EQU 14 ; < End of list -LOCAL_STATUS_FIELD TEXTEQU <DWORD> - - -; < CPU MSR Register definitions ------------------------------------------ - SYS_CFG EQU 0C0010010h - TOP_MEM EQU 0C001001Ah - TOP_MEM2 EQU 0C001001Dh - HWCR EQU 0C0010015h - NB_CFG EQU 0C001001Fh - - FS_BASE EQU 0C0000100h - IORR0_BASE EQU 0C0010016h - IORR0_MASK EQU 0C0010017h - BU_CFG EQU 0C0011023h - BU_CFG2 EQU 0C001102Ah - COFVID_STAT EQU 0C0010071h - TSC EQU 10h - -; =============================================================================== - ; SPD Data for each DIMM -; =============================================================================== -SPD_DEF_STRUCT STRUCT - DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid - Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM -SPD_DEF_STRUCT ENDS - -; =============================================================================== - ; Channel Definition Structure - ; This data structure defines entries that are specific to the channel initialization -; =============================================================================== -CH_DEF_STRUCT STRUCT - ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) - TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel - ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - - DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. - MCTPtr POINTER ? ; < Pointer to the node data of this channel. - SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) - DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to - ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) - ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. - RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. - LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved. - Loads UINT8 ? ; < Number of devices loading bus - Dimms UINT8 ? ; < Number of DIMMs loading Channel - Ranks UINT8 ? ; < Number of ranks loading Channel DATA - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - ; < The following pointers will be pointed to dynamically allocated buffers. - ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. - ; < Example: If DIMM and Byte based training, then - ; < XX is a value in Hex - ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE - ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX - ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX - RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays - WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) - RdDqsDlys POINTER ? ; < Read Dqs delays - WrDatDlys POINTER ? ; < Write Data delays - RdDqs__Dlys POINTER ? ; < Read DQS data - RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS - RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS - WrDatMinDlys POINTER ? ; < Minimum Window for Write data - WrDatMaxDlys POINTER ? ; < Maximum Window for Write data - RcvEnDlysMemPs1 POINTER ? ; < DQS Receiver Enable Delays for Memory Pstate 1 - WrDqsDlysMemPs1 POINTER ? ; < Write DQS delays for Memory Pstate 1 (only valid for DDR3) - RdDqsDlysMemPs1 POINTER ? ; < Read Dqs delays for Memory Pstate 1 - WrDatDlysMemPs1 POINTER ? ; < Write Data delays for Memory Pstate 1 - RdDqs__DlysMemPs1 POINTER ? ; < Read DQS data for Memory Pstate 1 - RdDqsMinDlysMemPs1 POINTER ? ; < Minimum Window for Read DQS for Memory Pstate 1 - RdDqsMaxDlysMemPs1 POINTER ? ; < Maximum Window for Read DQS for Memory Pstate 1 - WrDatMinDlysMemPs1 POINTER ? ; < Minimum Window for Write data for Memory Pstate 1 - WrDatMaxDlysMemPs1 POINTER ? ; < Maximum Window for Write data for Memory Pstate 1 - RowCount UINT8 ? ; < Number of rows of the allocated buffer. - ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. - - FailingBitMask POINTER ? ; < Table of masks to Track Failing bits - FailingBitMaskMemPs1 POINTER ? ; < Table of masks to Track Failing bits for Memory Pstate 1 - DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) - DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) - PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) - PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) - PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) - PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) - PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8]) - DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... - DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale - PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern - ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) - Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) - Pattern UINT8 ? ; < Current pattern - DqsDelay UINT8 ? ; < Current DQS delay value - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - DctMaxRdLat UINT16 (4) DUP (?) ; < Max Read Latency (ns) for the DCT - ; < DctMaxRdLat [i] is for NBPstate i DIMMValidCh UINT8 ? ; < DIMM# in CH - DIMMValidCh UINT8 ? ; < DIMM# in CH - MaxCh UINT8 ? ; < Max number of CH in system - Dct UINT8 ? ; < Dct pointer - WrDatGrossH UINT8 ? ; < Write Data Gross delay high value - DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low - - TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB - CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly - T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) - DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag - DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag - SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training - - ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory - NodeSysBase UINT32 ? ; < for channel interleave usage - RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected - CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM - CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM - CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM - CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM - CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM - - CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present - DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable - DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error - DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded - DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 - DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) - DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. - DimmQrPresent UINT8 ? ; < QuadRank DIMM present? - DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. - LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs - LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration - LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm. - DimmNibbleAccess UINT8 ? ; < For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. - MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will - ; < base on this array to disable unused MemClk to save power. - ; < - ; < The array must have 8 entries. Each entry, which associates with - ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. - ; < Example: - ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package - ; < is like below: - ; < Bit AM3/S1g3 pin name - ; < 0 M[B,A]_CLK_H/L[0] - ; < 1 M[B,A]_CLK_H/L[1] - ; < 2 M[B,A]_CLK_H/L[2] - ; < 3 M[B,A]_CLK_H/L[3] - ; < 4 M[B,A]_CLK_H/L[4] - ; < 5 M[B,A]_CLK_H/L[5] - ; < 6 M[B,A]_CLK_H/L[6] - ; < 7 M[B,A]_CLK_H/L[7] - ; < And platform has the following routing: - ; < CS0 M[B,A]_CLK_H/L[4] - ; < CS1 M[B,A]_CLK_H/L[2] - ; < CS2 M[B,A]_CLK_H/L[3] - ; < CS3 M[B,A]_CLK_H/L[5] - ; < Then MemClkDisMap should be pointed to the following array: - ; < CLK_2 CLK_3 CLK_4 CLK_5 - ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 - ; < Each entry of the array is the bitmask of 8 chip selects. - - CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of CKE pins to the DIMMs' ranks. - ; < The array must have 2 entries. Each entry, which associates with - ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. - ; < AGESA will base on this array to disable unused CKE pins to save power. - - ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of ODT pins to the DIMMs' ranks. - ; < The array must have 4 entries. Each entry, which associates with - ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. - ; < AGESA will base on this array to disable unused ODT pins to save power. - - ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes - ; < the routing of chip select pins to the DIMMs' ranks. - ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. - ; < AGESA will base on this array to disable unused Chip select pins to save power. - - ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. - - MaxVref UINT8 ? ; < Maximum Vref Value for channel - - Reserved UINT8 (100) DUP (?) ; < Reserved -CH_DEF_STRUCT ENDS - -; =============================================================================== - ; DCT Channel Timing Parameters - ; This data structure sets timings that are specific to the channel -; =============================================================================== -CH_TIMING_STRUCT STRUCT - DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. - DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. - DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. - DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found - CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present - CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled - CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled - CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training - DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved. - DimmQrPresent UINT16 ? ; < QuadRank DIMM present? - DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present - DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present - Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved. - Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved. - Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved. - - DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs - DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs - DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs - DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs - DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs - DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs - DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs - DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs - DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs - TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz - Speed UINT16 ? ; < DRAM bus speed in MHz - ; < 400 (MHz) - ; < 533 (MHz) - ; < 667 (MHz) - ; < 800 (MHz) - ; < and so on... - CasL UINT8 ? ; < CAS latency DCT setting (busclocks) - Trcd UINT8 ? ; < DCT Trcd (busclocks) - Trp UINT8 ? ; < DCT Trp (busclocks) - Trtp UINT8 ? ; < DCT Trtp (busclocks) - Tras UINT8 ? ; < DCT Tras (busclocks) - Trc UINT8 ? ; < DCT Trc (busclocks) - Twr UINT8 ? ; < DCT Twr (busclocks) - Trrd UINT8 ? ; < DCT Trrd (busclocks) - Twtr UINT8 ? ; < DCT Twtr (busclocks) - Tfaw UINT8 ? ; < DCT Tfaw (busclocks) - Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc - ; < 0 = 75ns (for 256Mb devs) - ; < 1 = 105ns (for 512Mb devs) - ; < 2 = 127.5ns (for 1Gb devs) - ; < 3 = 195ns (for 2Gb devs) - ; < 4 = 327.5ns (for 4Gb devs) - Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) - Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) - Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) - DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. - SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) - ; < FALSE = 1T - ; < TRUE = 2T - TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) - Twrrd UINT8 ? ; < DCT Twrrd (busclocks) - Twrwr UINT8 ? ; < DCT Twrwr (busclocks) - Trdrd UINT8 ? ; < DCT Trdrd (busclocks) - TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) - TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) - TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) - TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) - MaxRdLat UINT16 ? ; < Max Read Latency - WrDatGrossH UINT8 ? ; < Temporary variables must be removed - DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed -CH_TIMING_STRUCT ENDS - -; =============================================================================== - ; Data for each DCT - ; This data structure defines data used to configure each DRAM controller -; =============================================================================== -DCT_STRUCT STRUCT - Dct UINT8 ? ; < Current Dct - Timings CH_TIMING_STRUCT {} ; < Channel Timing structure - TimingsMemPs1 POINTER ? ; < Pointed to channel timing structure for Memory Pstate 1 - ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures - ChannelCount UINT8 ? ; < Number of channel per this DCT - BkIntDis BOOLEAN ? ; < Bank interleave requested but not enabled on current DCT -DCT_STRUCT ENDS - - -; =============================================================================== - ; Data Structure defining each Die - ; This data structure contains information that is used to configure each Die -; =============================================================================== -DIE_STRUCT STRUCT - - ; Advanced: - - NodeId UINT8 ? ; < Node ID of current controller - SocketId UINT8 ? ; < Socket ID of this Die - DieId UINT8 ? ; < ID of this die relative to the socket - PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. - ErrCode AGESA_STATUS ? ; < Current error condition of Node - ; < 0x0 = AGESA_SUCCESS - ; < 0x1 = AGESA_UNSUPPORTED - ; < 0x2 = AGESA_BOUNDS_CHK - ; < 0x3 = AGESA_ALERT - ; < 0x4 = AGESA_WARNING - ; < 0x5 = AGESA_ERROR - ; < 0x6 = AGESA_CRITICAL - ; < 0x7 = AGESA_FATAL - ; < - ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field - Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field - NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. - NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. - NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node - NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. - DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. - ; < DIMM# Select Signal - ; < 0 MA0_CS_L[0, 1] - ; < 1 MB0_CS_L[0, 1] - ; < 2 MA1_CS_L[0, 1] - ; < 3 MB1_CS_L[0, 1] - ; < 4 MA2_CS_L[0, 1] - ; < 5 MB2_CS_L[0, 1] - ; < 6 MA3_CS_L[0, 1] - ; < 7 MB3_CS_L[0, 1] - DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured - RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM - LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. - DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. - DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. - DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training - ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects - ; < 0 in any bit field indicates Channel 0 - ; < 1 in any bit field indicates Channel 1 - Dct UINT8 ? ; < Need to be removed - ; < DCT pointer - GangedMode BOOLEAN ? ; < Ganged mode - ; < 0 = disabled - ; < 1 = enabled - LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node - HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. - HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. - MLoad UINT8 ? ; < Need to be removed - ; < Number of devices loading MAA bus - MaxAsyncLat UINT8 ? ; < Legacy wrapper - ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper - ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 - ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay - - DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs - DctCount UINT8 ? ; < Number of DCTs per this Die - Reserved UINT8 (16) DUP (?) ; < Reserved -DIE_STRUCT ENDS - -; ********************************************************************* -; * S3 Support structure -; ********************************************************************* - ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure -AMD_S3_PARAMS STRUCT - Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM - Version UINT16 ? ; < S3 Params version number - Flags UINT32 ? ; < Indicates operation - NvStorage POINTER ? ; < Pointer to memory critical save state data - NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region - VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data - VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region -AMD_S3_PARAMS ENDS - -; =============================================================================== - ; MEM_PARAMETER_STRUCT - ; This data structure is used to pass wrapper parameters to the memory configuration code -; =============================================================================== -MEM_PARAMETER_STRUCT STRUCT - - ; Basic (Return parameters) - ; (This section contains the outbound parameters from the memory init code) - - GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield - HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. - Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. - Sub1THoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 1TB dram hole. - SysLimit UINT32 ? ; < Limit[47:16] (system address) - DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. - ExternalVrefValue UINT8 ? ; < Target reference voltage for external Vref for training - MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT - ; Advanced (Optional parameters) - ; Optional (all defaults values will be initialized by the - ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up - ; to the IBV/OEM to change the defaults after initialization - ; but prior to the main entry to the memory code): - - ; Memory Map/Mgt. - - BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) - ; < NV_BOTTOM_IO[7:0]=Addr[31:24] - MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) - ; < FALSE = disable - ; < TRUE = enable - LimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1 TB - ; < FALSE = disable - ; < TRUE = enable - ; Dram Timing - - UserTimingMode USER_MEMORY_TIMING_MODE ? ; < User Memclock Mode - - MemClockValue MEMORY_BUS_SPEED ? ; < Memory Clock Value - - ; Dram Configuration - - EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; ECC - - EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE - ; < FALSE = disable (AMD default) - ; < TRUE = enable - ; Dram Power - - EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) - ; < FALSE =disable (AMD default) - ; < TRUE =enable - ; Online Spare - - EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: - ; < FALSE = disable Spare (AMD default) - ; < TRUE = enable Spare - TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. - - PlatformMemoryConfiguration POINTER ? - ; < Points to a table that contains platform specific settings - ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) - ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that - ; < contains default conservative settings. Platform BIOS can either tweak - ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. - ; < - EnableParity BOOLEAN ? ; < Parity control - ; < TRUE = enable - ; < FALSE = disable (AMD default) - EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - EnableMemClr BOOLEAN ? ; < Memory Clear functionality control - ; < FALSE = disable - ; < TRUE = enable (AMD default) - ; Uma Configuration - - UmaMode UMA_MODE ? ; < Uma Mode - ; < 0 = None - ; < 1 = Specified - ; < 2 = Auto - UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) - ; < NV_UMA_Size[31:0]=Addr[47:16] - ; < - UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) - ; < NV_UMA_Base[31:0]=Addr[47:16] - ; < - - ; Memory Restore Feature - - MemRestoreCtl BOOLEAN ? ; < Memory context restore control - ; < FALSE = perform memory init as normal (AMD default) - ; < TRUE = restore memory context and skip training. This requires - ; < MemContext is valid before AmdInitPost - SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto - ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost - ; < FALSE = AGESA will not setup MemContext block. Platform is - ; < expected to call S3Save later in POST if it wants to - ; < use memory context restore feature. - MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to - ; < save and restore for memory context restore feature to work. - ; < It uses the subset of S3Save block to save/restore. Hence platform - ; < may save only S3 block and uses it for both S3 resume and - ; < memory context restore. - ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext - ; < before AmdInitPost. - ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext - ; < right after AmdInitPost. - ExternalVrefCtl BOOLEAN ? ; < Control the use of external Vref - ; < TRUE = AGESA will use the function defined in "AGESA_EXTERNAL____TRAIN_VREF_CHANGE" in function list - ; < to change the vref - ; < FALSE = AGESA will will use the internal vref control. - ForceTrainMode FORCE_TRAIN_MODE ? ; < Training Mode - ; < 0 = Force 1D Training for all configurations - ; < 1 = Force training for all configurations - ; < 2 = Auto - AGESA will control -MEM_PARAMETER_STRUCT ENDS - - -; =============================================================================== - ; Function definition - ; This data structure passes function pointers to the memory configuration code. - ; The wrapper can use this structure with customized versions -; ================================================================================ -MEM_FUNCTION_STRUCT STRUCT - - ; PUBLIC required Internal functions - - amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific - amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific - - ; PUBLIC optional functions - - amdMemEccInit POINTER ? ; < NB proc for ECC feature - amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature - amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature - amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature - amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature - amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature - amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' - amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature - amdMemUDimmInit POINTER ? ; < NB code for UDIMMs - amdMemRDimmInit POINTER ? ; < NB code for RDIMMs - amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs - Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition -MEM_FUNCTION_STRUCT ENDS - -; =============================================================================== - ; Socket Structure - -; =============================================================================== -MEM_SOCKET_STRUCT STRUCT - ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data - - TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data - -MEM_SOCKET_STRUCT ENDS - -; =============================================================================== - ; MEM_DATA_STRUCT -; =============================================================================== -MEM_DATA_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header - - ParameterListPtr POINTER ? ; < List of input Parameters - - FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers - - GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info - - ErrorHandling POINTER ? ; < Error Handling - - ; SocketList is a shortcut for IBVs to retrieve training - ; and timing data for each channel indexed by socket/channel, - ; eliminating their need to parse die/dct/channel etc. - ; It contains pointers to the populated data structures for - ; each channel and skips the channel structures that are - ; unpopulated. In the case of channels sharing the same DCT, - ; the pTimings pointers will point to the same DCT Timing data. - - SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code - - DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs - DieCount UINT8 ? ; < Number of MCTs in the system. - - SpdDataStructure POINTER ? ; < Pointer to SPD Data structure - - PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure - - IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported - - TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz. - -MEM_DATA_STRUCT ENDS - -; =============================================================================== -; UMA_INFO_STRUCT -; =============================================================================== -UMA_INFO STRUCT - UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] - UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] - UmaAttributes UINT32 ? ; < Indicate the attribute of Uma - UmaMode UINT8 ? ; < Indicate the mode of Uma - MemClock UINT16 ? ; < Indicate memory running speed in MHz - Reserved UINT8 (3) DUP (?) ; < Reserved for future usage -UMA_INFO ENDS - -; =============================================================================== -; Bitfield for ID -; =============================================================================== -ID_FIELD STRUCT - SocketId UINT16 ? -; OUT UINT16 SocketId:8; ; < Socket ID -; OUT UINT16 ModuleId:8; ; < Module ID -ID_FIELD ENDS - -; =============================================================================== -; Union for ID of socket and module that will be passed out in call out -; =============================================================================== -ID_INFO UNION - IdField ID_FIELD {} ; < Bitfield for ID - IdInformation UINT16 ? ; < ID information for call out -ID_INFO ENDS - - ; AGESA MEMORY ERRORS - - ; AGESA_ALERT Memory Errors -MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but - ; < cannot be applied to current configurations. -MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match -MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue - - ; AGESA_ERROR Memory Errors -MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS -MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS -MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS -MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS -MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue -MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window -MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit -MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit -MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit -MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit -MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit -MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit -MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit -MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit -MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit -MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit -MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit -MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit -MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit -MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training -MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP -MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training -MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm -MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value -MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit -MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT -MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found -MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz -MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range -MEM_ERROR_NO____RDDQS_WINDOW EQU 040D0300h ; < No RdDqs Window -MEM_ERROR_NO____RDDQS_HEIGHT EQU 040E0300h ; < No RdDqs Height -MEM_ERROR____DQS_ERROR EQU 040F0300h ; < RdDqs Error -MEM_ERROR_INVALID____RDDQS_VALUE EQU 04022400h ; < RdDqs invalid value found -MEM_ERROR____DQS_VREF_MARGIN_ERROR EQU 04023400h ; < RdDqs Vef Margin error found -MEM_ERROR_LR_IBT_NOT_FOUND EQU 04013500h ; < No LR dimm IBT value is found -MEM_ERROR_MR0_NOT_FOUND EQU 04023500h ; < No MR0 value is found -MEM_ERROR_ODT_PATTERN_NOT_FOUND EQU 04033500h ; < No odt pattern value is found -MEM_ERROR_RC2_IBT_NOT_FOUND EQU 04043500h ; < No RC2 IBT value is found -MEM_ERROR_RC10_OP_SPEED_NOT_FOUND EQU 04053500h ; < No RC10 op speed is found -MEM_ERROR_RTT_NOT_FOUND EQU 04063500h ; < No RTT value is found -MEM_ERROR_P___NOT_FOUND EQU 04073500h ; < No training config value is found -MEM_ERROR_SAO_NOT_FOUND EQU 04083500h ; < No slow access mode, Address timing and Output driver compensation value is found -MEM_ERROR_CLK_DIS_MAP_NOT_FOUND EQU 04093500h ; < No CLK disable map is found -MEM_ERROR_CKE_TRI_MAP_NOT_FOUND EQU 040A3500h ; < No CKE tristate map is found -MEM_ERROR_ODT_TRI_MAP_NOT_FOUND EQU 040B3500h ; < No ODT tristate map is found -MEM_ERROR_CS_TRI_MAP_NOT_FOUND EQU 040C3500h ; < No CS tristate map is found -MEM_ERROR_TRAINING_SEED_NOT_FOUND EQU 040D3500h ; < No training seed is found - - ; AGESA_WARNING Memory Errors - MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported - MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported - - MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP - MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, - ; < bank interleaving, or bank swizzle is enabled. - MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. - MEM_WARNING_ECC_DIS EQU 04041700h ; < ECC has been disabled as a result of an internal issue - MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. - MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. - MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled - MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled - MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled - MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported - MEM_WARNING_INITIAL_DDR3VOLT_NONZERO EQU 04012400h ; < DDR3 voltage initial value is not 0 - MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO EQU 04012500h ; < Cannot find a commonly supported VDDIO - - ; AGESA_FATAL Memory Errors - MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode - MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched - MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system - MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched - MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found - MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings - MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT - MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV - MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data - MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training - MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" - MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data - MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK - MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify - MEM_ERROR_VDDIO_UNSUPPORTED EQU 04022500h ; < VDDIO of the dimms on the board is not supported - MEM_ERROR_HEAP_ALLOCATE_FOR___ EQU 040B1F00h ; < Heap allocation error for training data - MEM_ERROR_HEAP_DEALLOCATE_FOR___ EQU 040C1F00h ; < Heap de-allocation error for training data - - ; AGESA_CRITICAL Memory Errors - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 - MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 - MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported - - -; ---------------------------------------------------------------------------- -; * -; * END OF MEMORY-SPECIFIC DATA STRUCTURES -; * -; *---------------------------------------------------------------------------- -; - - -; ---------------------------------------------------------------------------- -; * -; * CPU RELATED DEFINITIONS -; * -; *---------------------------------------------------------------------------- -; - -; CPU Event definitions. - -; Defines used to filter CPU events based on functional blocks -CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h -CPU_EVENT_PM_EVENT_CLASS EQU 008000400h - -;================================================================ -; CPU General events -; Heap allocation (AppFunction = 01h) -CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h -CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h -CPU_ERROR_HEAP_IS_FULL EQU 008020100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h -CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h -; BrandId (AppFunction = 02h) -CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h -; Micro code patch (AppFunction = 03h) -CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h -; Power management (AppFunction = 04h) -CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h -CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h -CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h -CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h -; Other CPU events (AppFunction = 05h) -CPU_EVENT_BIST_ERROR EQU 008000500h -CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY EQU 008010500h -CPU_EVENT_STACK_REENTRY EQU 008020500h -CPU_EVENT_CORE_NOT_IDENTIFIED EQU 008030500h -;================================================================= -; CPU Feature events -; Execution cache (AppFunction = 21h) -; AGESA_CACHE_SIZE_REDUCED 2101 -; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 -; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 -; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 -; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 -; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 -; AGESA_DEALLOCATE_CACHE_REGIONS 2107 -CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h -; Core Leveling (AppFunction = 22h) -CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h -; HT Assist (AppFunction = 23h) -CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h - -; CPU Build Configuration structures and definitions - -; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS -AP_MTRR_SETTINGS STRUCT - MsrAddr UINT32 ? ; < Fixed-Sized MTRR address - MsrData UINT64 ? ; < MTRR Settings -AP_MTRR_SETTINGS ENDS - -AMD_AP_MTRR_FIX64k_00000 EQU 000000250h -AMD_AP_MTRR_FIX16k_80000 EQU 000000258h -AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h -AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h -AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h -AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah -AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh -AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch -AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh -AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh -AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh -CPU_LIST_TERMINAL EQU 0FFFFFFFFh - -; *********************************************************************** -; * -; * AGESA interface Call-Out function parameter structures -; * -; ********************************************************************** - - ; Parameters structure for interface call-out AgesaAllocateBuffer -AGESA_BUFFER_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - BufferLength UINT32 ? ; < Size of buffer to allocate - BufferHandle UINT32 ? ; < Identifier or name for the buffer - BufferPointer POINTER ? ; < location of the created buffer -AGESA_BUFFER_PARAMS ENDS - - ; Parameters structure for interface call-out AgesaRunCodeOnAp -AP_EXE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - FunctionNumber UINT32 ? ; < Index of the procedure to execute - RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use - RelatedBlockLength UINT32 ? ; < Size of the related data block -AP_EXE_PARAMS ENDS - - ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery -AGESA_READ_SPD_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < standard header - SocketId UINT8 ? ; < Address of SPD - socket ID - MemChannelId UINT8 ? ; < Address of SPD - memory channel ID - DimmId UINT8 ? ; < Address of SPD - DIMM ID - Buffer POINTER ? ; < Location where to place the SPD content - MemData POINTER ? ; < Location of the MemData structure, for reference -AGESA_READ_SPD_PARAMS ENDS - - ; Buffer Handles - AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function - AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data - AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table - AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID - AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function - AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function - AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function - AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function - AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info - AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table - AMD_ACPI_IVRS_BUFFER_HANDLE EQU 000D00Ah ; < Assign 0x000D00A buffer handle to IOMMU IVRS table -AMD_BUFFER_HANDLE TEXTEQU <DWORD> -; *********************************************************************** -; * -; * AGESA interface Call-Out function prototypes -; * -; ********************************************************************** - -; *********************************************************************** -; * -; * AGESA interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Platform Configuration: The parameters in boot branch function -; ********************************************************************* - -; The possible platform control flow settings. - Nfcm EQU 0 ; < Normal Flow Control Mode. - UmaDr EQU 1 ; < UMA using Display Refresh flow control. - UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. - Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). - Iommu EQU 4 ; < An IOMMU is in use in the system. - MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. -PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> - -; Platform Deemphasis Levels. - DeemphasisLevelNone EQU 0 ; < No Deemphasis. - DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. - DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. - DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. - DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. - DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. - DcvLevelNone EQU 16 ; < No DCV Deemphasis. - DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. - DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. - DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. - DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. - DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. - DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. - DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. - DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. - MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. -PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> - -; Provide Deemphasis Levels for HT Links. -; -; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will -; be checked for a match. The item matches for a Socket, Link if the link frequency is -; is in the inclusive range HighFreq:LoFreq. -; AGESA does not set deemphasis in IO devices, only in processors. - -CPU_HT_DEEMPHASIS_LEVEL STRUCT - ; Match fields - Socket UINT8 ? ; < One Socket on which this Link is located - Link UINT8 ? ; < The Link on this Processor. - LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and - HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. - ; Value fields - ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link - DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. -CPU_HT_DEEMPHASIS_LEVEL ENDS - -; The possible hardware prefetch mode settings. - HARDWARE_PREFETCHER_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_L1_PREFETCHER EQU 1 ; Use the recommended settings for the hardware prefetcher, but disable L1 prefetching. - DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 2 ; Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. - DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES EQU 3 ; Use the recommended settings for the hardware prefetcher, but disable both the L1 prefetcher and training on software prefetches. - DISABLE_HARDWARE_PREFETCH EQU 4 ; Disable hardware prefetching. - MAX_HARDWARE_PREFETCH_MODE EQU 5 ; Not a hardware prefetch mode, use for limit checking. -HARDWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; The possible software prefetch mode settings. - SOFTWARE_PREFETCHES_AUTO EQU 0 ; Use the recommended setting for the processor. In most cases, the recommended setting is enabled. - DISABLE_SOFTWARE_PREFETCHES EQU 1 ; Disable software prefetches (convert software prefetch instructions to NOP). - MAX_SOFTWARE_PREFETCH_MODE EQU 2 ; Not a software prefetch mode, use for limit checking. -SOFTWARE_PREFETCH_MODE TEXTEQU <DWORD> - -; Advanced performance tunings, prefetchers. -; These settings provide for performance tuning to optimize for specific workloads. -ADVANCED_PERFORMANCE_PROFILE STRUCT - HardwarePrefetchMode HARDWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the hardware prefetcher setting. - SoftwarePrefetchMode SOFTWARE_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the software prefetch instructions. - DramPrefetchMode DRAM_PREFETCH_MODE ? ; This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. -ADVANCED_PERFORMANCE_PROFILE ENDS - -; The possible platform power policy settings. - Performance EQU 0 ; < Optimize for performance. - BatteryLife EQU 1 ; < Optimize for battery life. - MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. -PLATFORM_POWER_POLICY TEXTEQU <DWORD> - -; Platform performance settings for optimized settings. -; Several configuration settings for the processor depend upon other parts and -; general designer choices for the system. The determination of these data points -; is not standard for all platforms, so the host environment needs to provide these -; to specify how the system is to be configured. -PERFORMANCE_PROFILE STRUCT - PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. - UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. - UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization. - Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. - UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. - AdvancedPerformanceProfile ADVANCED_PERFORMANCE_PROFILE {} ; < The advanced platform performance settings. - PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy -PERFORMANCE_PROFILE ENDS - -; Platform settings that describe the voltage regulator modules of the system. -; Many power management settings are dependent upon the characteristics of the -; on-board voltage regulator module (VRM). The host environment needs to provide -; these to specify how the system is to be configured. -PLATFORM_VRM_CONFIGURATION STRUCT - CurrentLimit UINT32 ? ; < Vrm Current Limit. - LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. - SlewRate UINT32 ? ; < Vrm Slew Rate. - AdditionalDelay UINT32 ? ; < Vrm Additional Delay. - HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. - InrushCurrentLimit UINT32 ? ; < Vrm Inrush Current Limit. -PLATFORM_VRM_CONFIGURATION ENDS - -; The VRM types to characterize. - CoreVrm EQU 0 ; < VDD plane. - NbVrm EQU 1 ; < VDDNB plane. - MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking. -PLATFORM_VRM_TYPE TEXTEQU <DWORD> - -; FCH Platform Configuration Policy -FCH_PLATFORM_POLICY STRUCT - CfgSmbus0BaseAddress UINT16 ? ; SMBUS0 Controller Base Address - CfgSmbus1BaseAddress UINT16 ? ; SMBUS1 Controller Base Address - CfgSioPmeBaseAddress UINT16 ? ; I/O base address for LPC I/O target range - CfgAcpiPm1EvtBlkAddr UINT16 ? ; I/O base address of ACPI power management Event Block - CfgAcpiPm1CntBlkAddr UINT16 ? ; I/O base address of ACPI power management Control Block - CfgAcpiPmTmrBlkAddr UINT16 ? ; I/O base address of ACPI power management Timer Block - CfgCpuControlBlkAddr UINT16 ? ; I/O base address of ACPI power management CPU Control Block - CfgAcpiGpe0BlkAddr UINT16 ? ; I/O base address of ACPI power management General Purpose Event Block - CfgSmiCmdPortAddr UINT16 ? ; I/O base address of ACPI SMI Command Block - CfgAcpiPmaCntBlkAddr UINT16 ? ; I/O base address of ACPI power management additional control block - CfgGecShadowRomBase UINT32 ? ; 32-bit base address to the GEC shadow ROM - CfgWatchDogTimerBase UINT32 ? ; Watchdog Timer base address - CfgSpiRomBaseAddress UINT32 ? ; Base address for the SPI ROM controller - CfgHpetBaseAddress UINT32 ? ; HPET MMIO base address - CfgAzaliaSsid UINT32 ? ; Subsystem ID of HD Audio controller - CfgSmbusSsid UINT32 ? ; Subsystem ID of SMBUS controller - CfgIdeSsid UINT32 ? ; Subsystem ID of IDE controller - CfgSataAhciSsid UINT32 ? ; Subsystem ID of SATA controller in AHCI mode - CfgSataIdeSsid UINT32 ? ; Subsystem ID of SATA controller in IDE mode - CfgSataRaid5Ssid UINT32 ? ; Subsystem ID of SATA controller in RAID5 mode - CfgSataRaidSsid UINT32 ? ; Subsystem ID of SATA controller in RAID mode - CfgEhciSsid UINT32 ? ; Subsystem ID of EHCI - CfgOhciSsid UINT32 ? ; Subsystem ID of OHCI - CfgLpcSsid UINT32 ? ; Subsystem ID of LPC ISA Bridge - CfgSdSsid UINT32 ? ; Subsystem ID of SecureDigital controller - CfgXhciSsid UINT32 ? ; Subsystem ID of XHCI - CfgFchPort80BehindPcib BOOLEAN ? ; Is port80 cycle going to the PCI bridge - CfgFchEnableAcpiSleepTrap BOOLEAN ? ; ACPI sleep SMI enable/disable - CfgFchGppLinkConfig GPP_LINKMODE ? ; FCH GPP link configuration - CfgFchGppPort0Present BOOLEAN ? ; Is FCH GPP port 0 present - CfgFchGppPort1Present BOOLEAN ? ; Is FCH GPP port 1 present - CfgFchGppPort2Present BOOLEAN ? ; Is FCH GPP port 2 present - CfgFchGppPort3Present BOOLEAN ? ; Is FCH GPP port 3 present - CfgFchGppPort0HotPlug BOOLEAN ? ; Is FCH GPP port 0 hotplug capable - CfgFchGppPort1HotPlug BOOLEAN ? ; Is FCH GPP port 1 hotplug capable - CfgFchGppPort2HotPlug BOOLEAN ? ; Is FCH GPP port 2 hotplug capable - CfgFchGppPort3HotPlug BOOLEAN ? ; Is FCH GPP port 3 hotplug capable - - CfgFchEsataPortBitMap UINT8 ? ; ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable - CfgFchIrPinControl UINT8 ? ; Register bitfield describing Infrared Pin Control: - CfgFchSdClockControl SD_CLOCK_CONTROL ? ; FCH SD Clock Control - CfgFchSciMapControl POINTER ? ; FCH SCI Mapping Control - CfgFchSataPhyControl POINTER ? ; FCH SATA PHY Control - CfgFchGpioControl POINTER ? ; FCH GPIO Control -FCH_PLATFORM_POLICY ENDS - - -; Build Option/Configuration Boolean Structure -BUILD_OPT_CFG STRUCT - ; Build Option Area - VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string - OptionUDimms BOOLEAN ? ; < UDIMMS - OptionRDimms BOOLEAN ? ; < RDIMMS - OptionLrDimms BOOLEAN ? ; < LRDIMMS - OptionEcc BOOLEAN ? ; < ECC - OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE - OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE - OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE - OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING - OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE - OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE - OptionMultisocket BOOLEAN ? ; < MULTISOCKET - OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES - OptionPStatesInHpcMode BOOLEAN ? ; < PSTATES_HPC_MODE - OptionSrat BOOLEAN ? ; < SRAT - OptionSlit BOOLEAN ? ; < SLIT - OptionWhea BOOLEAN ? ; < WHEA - OptionDmi BOOLEAN ? ; < DMI - OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES - OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR - - ; Build Configuration Area - CfgPciMmioAddress UINT64 ? ; < PciMmioBase - CfgPciMmioSize UINT32 ? ; < PciMmioSize - CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber - CfgMemInitPstate UINT32 ? ; < MemoryInitPstate - CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode - CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData - CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1 - CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2 - CfgPlatformC1eOpData3 UINT32 ? ; < PlatformC1eOpData3 - CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode - CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData - CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress - CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode - CfgLowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Low power Pstate for PROCHOT mode - CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig - CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. - CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis - CfgAmdPlatformType UINT32 ? ; < AmdPlatformType - CfgAmdPstateCapValue UINT32 ? ; < Amd pstate ceiling enabling deck - - CfgMemoryBusFrequencyLimit MEMORY_BUS_SPEED ? ; < Memory Bus Frequency Limit - CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged - CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable - CfgMemoryQuadrankType QUANDRANK_TYPE ? ; < Memory Quadrank Type - CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable - CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable - CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable - CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable - CfgLimitMemoryToBelow1Tb BOOLEAN ? ; < Limit memory address space to below 1TB - CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving - CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving - CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving - CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down - CfgPowerDownMode POWER_DOWN_MODE ? ; < Power Down Mode - CfgOnlineSpare BOOLEAN ? ; < Online Spare - CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable - CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle - CfgTimingModeSelect USER_MEMORY_TIMING_MODE ? ; < Timing Mode Select - CfgMemoryClockSelect MEMORY_BUS_SPEED ? ; < Memory Clock Select - CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control - CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum - CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode - CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On - CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature - CfgEccRedirection BOOLEAN ? ; < ECC Redirection - CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate - CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate - CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate - CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate - CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate - CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood - CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size - CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition - CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment - CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore - CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent - CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt - CfgUmaMode UMA_MODE ? ; < Uma Mode - CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] - CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support - CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment - CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable - CfgAbmSupport UINT8 ? ; < ABM support - CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate - CfgLcdBackLightControl UINT16 ? ; < Lcd back light control - CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID - CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address - CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID - CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID - CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID - CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only - CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only - FchBldCfg POINTER ? ; < FCH platform build configuration policy - CfgIommuSupport BOOLEAN ? ; IOMMU support - CfgLvdsPowerOnSeqDigonToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqDeToDigon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToDe UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqOnToOffDelay UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqVaryBlToBlon UINT8 ? ; Panel initialization timing - CfgLvdsPowerOnSeqBlonToVaryBl UINT8 ? ; Panel initialization timing - CfgLvdsMaxPixelClockFreq UINT16 ? ; The maximum pixel clock frequency supported - CfgLcdBitDepthControlValue UINT32 ? ; The LCD bit depth control settings - CfgLvds24bbpPanelMode UINT8 ? ; The LVDS 24 BBP mode - CfgLvdsMiscControl LVDS_MISC_CONTROL {}; THe LVDS Misc control - CfgPcieRefClkSpreadSpectrum UINT16 ? ; PCIe Reference Clock Spread Spectrum - CfgExternalVrefCtlFeature BOOLEAN ? ; External Vref control - CfgForceTrainMode FORCE_TRAIN_MODE ? ; < Force Train Mode - CfgGnbRemoteDisplaySupport BOOLEAN ? ; Wireless Display Support - CfgIvrsExclusionRangeList POINTER ? ; IOMMU Exclusion Range List - Reserved BOOLEAN ? ; < reserved... -BUILD_OPT_CFG ENDS - - ; A structure containing platform specific operational characteristics. This - ; structure is initially populated by the initializer with a copy of the same - ; structure that was created at build time using the build configuration controls. -PLATFORM_CONFIGURATION STRUCT - PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. - PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. - CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. - C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. - C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. - C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port. - C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. - C1ePlatformData3 UINT32 ? ; < If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e - CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. - CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature - ; < If CStateMode is CStateModeC6, this item is reserved - CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that - ; < can be used to allow the CPU to enter Cstates. - CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto. - UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. - UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. - UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. - UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. - UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. - LowPowerPstateForProcHot PLATFORM_LOW_POWER_PSTATE_MODES ? ; < Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto. - PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. - ForcePstateIndependent BOOLEAN ? ; < P-State _PSD independence or dependence. - PStatesInHpcMode BOOLEAN ? ; < High performance computing (HPC) mode - NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system - VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. - ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope - ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. - ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. - GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output), - ; < essentially it enables function 1 of graphics device. - ; < @li 0 = HD Audio disable - ; < @li 1 = HD Audio enable - AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is - ; < characteristic specific to display panel which used by platform design. - ; < @li 0 = ABM support disabled - ; < @li 1 = ABM support enabled - DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP. - LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control. - ; < If equal to 0 backlight not controlled by iGPU. -PLATFORM_CONFIGURATION ENDS - - -; ********************************************************************* -; * Structures for: AmdInitLate -; ********************************************************************* - PROC_VERSION_LENGTH EQU 48 - MAX_DIMMS_PER_SOCKET EQU 16 - - - ; Interface Parameter Structures - ; DMI Type4 - Processor ID -TYPE4_PROC_ID STRUCT - ProcIdLsd UINT32 ? ; < Lower half of 64b ID - ProcIdMsd UINT32 ? ; < Upper half of 64b ID -TYPE4_PROC_ID ENDS - - ; DMI Type 4 - Processor information -TYPE4_DMI_INFO STRUCT - T4ProcType UINT8 ? ; < CPU Type - T4ProcFamily UINT8 ? ; < Family 1 - T4ProcId TYPE4_PROC_ID {} ; < Id - T4Voltage UINT8 ? ; < Voltage - T4ExternalClock UINT16 ? ; < External clock - T4MaxSpeed UINT16 ? ; < Max speed - T4CurrentSpeed UINT16 ? ; < Current speed - T4Status UINT8 ? ; < Status - T4ProcUpgrade UINT8 ? ; < Up grade - T4CoreCount UINT8 ? ; < Core count - T4CoreEnabled UINT8 ? ; < Core Enable - T4ThreadCount UINT8 ? ; < Thread count - T4ProcCharacteristics UINT16 ? ; < Characteristics - T4ProcFamily2 UINT16 ? ; < Family 2 - T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version -TYPE4_DMI_INFO ENDS - - ; DMI Type 7 - Cache information -TYPE7_DMI_INFO STRUCT - T7CacheCfg UINT16 ? ; < Cache cfg - T7MaxCacheSize UINT16 ? ; < Max size - T7InstallSize UINT16 ? ; < Install size - T7SupportedSramType UINT16 ? ; < Supported Sram Type - T7CurrentSramType UINT16 ? ; < Current type - T7CacheSpeed UINT8 ? ; < Speed - T7ErrorCorrectionType UINT8 ? ; < ECC type - T7SystemCacheType UINT8 ? ; < Cache type - T7Associativity UINT8 ? ; < Associativity -TYPE7_DMI_INFO ENDS - - ; DMI Type 16 offset 04h - Location - - OtherLocation EQU 01h ; < Assign 01 to Other - UnknownLocation EQU 2 ; < Assign 02 to Unknown - SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard - IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card - EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card - PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card - McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card - PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card - ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card - NuBus EQU 10 ; < Assign 0A to NuBus - Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card - Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card - Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card - Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card -DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; - - ; DMI Type 16 offset 05h - Memory Error Correction - - OtherUse EQU 01h ; < Assign 01 to Other - UnknownUse EQU 2 ; < Assign 02 to Unknown - SystemMemory EQU 3 ; < Assign 03 to system memory - VideoMemory EQU 4 ; < Assign 04 to video memory - FlashMemory EQU 5 ; < Assign 05 to flash memory - NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM - CacheMemory EQU 7 ; < Assign 07 to cache memory -DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; - - ; DMI Type 16 offset 07h - Maximum Capacity - - Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other - Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown - Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None - Dmi16Parity EQU 4 ; < Assign 04 to parity - Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC - Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC - Dmi16Crc EQU 7 ; < Assign 07 to CRC -DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; - - ; DMI Type 16 - Physical Memory Array -TYPE16_DMI_INFO STRUCT - Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, - ; < whether on the system board or an add-in board. - Use DMI_T16_USE ? ; < Identifies the function for which the array - ; < is used. - MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or - ; < detection method supported by this memory array. - MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, - ; < for the array. - NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available - ; < for memory devices in this array. - ExtMaxCapacity UINT64 ? ; < The maximum memory capacity, in bytes, - ; < for this array. -TYPE16_DMI_INFO ENDS - - ; DMI Type 17 offset 0Eh - Form Factor - OtherFormFactor EQU 01h ; < Assign 01 to Other - UnknowFormFactor EQU 2 ; < Assign 02 to Unknown - SimmFormFactor EQU 3 ; < Assign 03 to SIMM - SipFormFactor EQU 4 ; < Assign 04 to SIP - ChipFormFactor EQU 5 ; < Assign 05 to Chip - DipFormFactor EQU 6 ; < Assign 06 to DIP - ZipFormFactor EQU 7 ; < Assign 07 to ZIP - ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card - DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM - TsopFormFactor EQU 10 ; < Assign 10 to TSOP - RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips - RimmFormFactor EQU 12 ; < Assign 12 to RIMM - SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM - SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM - FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM -DMI_T17_FORM_FACTOR TEXTEQU <DWORD> - - ; DMI Type 17 offset 12h - Memory Type - OtherMemType EQU 01h ; < Assign 01 to Other - UnknownMemType EQU 2 ; < Assign 02 to Unknown - DramMemType EQU 3 ; < Assign 03 to DRAM - EdramMemType EQU 4 ; < Assign 04 to EDRAM - VramMemType EQU 5 ; < Assign 05 to VRAM - SramMemType EQU 6 ; < Assign 06 to SRAM - RamMemType EQU 7 ; < Assign 07 to RAM - RomMemType EQU 8 ; < Assign 08 to ROM - FlashMemType EQU 9 ; < Assign 09 to Flash - EepromMemType EQU 10 ; < Assign 10 to EEPROM - FepromMemType EQU 11 ; < Assign 11 to FEPROM - EpromMemType EQU 12 ; < Assign 12 to EPROM - CdramMemType EQU 13 ; < Assign 13 to CDRAM - ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM - SdramMemType EQU 15 ; < Assign 15 to SDRAM - SgramMemType EQU 16 ; < Assign 16 to SGRAM - RdramMemType EQU 17 ; < Assign 17 to RDRAM - DdrMemType EQU 18 ; < Assign 18 to DDR - Ddr2MemType EQU 19 ; < Assign 19 to DDR2 - Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM - Ddr3MemType EQU 24 ; < Assign 24 to DDR3 - Fbd2MemType EQU 25 ; < Assign 25 to FBD2 -DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> - - ; DMI Type 17 offset 13h - Type Detail -DMI_T17_TYPE_DETAIL STRUCT - Reserved1 UINT16 ? -; OUT UINT16 Reserved1:1; ; < Reserved -; OUT UINT16 Other:1; ; < Other -; OUT UINT16 Unknown:1; ; < Unknown -; OUT UINT16 FastPaged:1; ; < Fast-Paged -; OUT UINT16 StaticColumn:1; ; < Static column -; OUT UINT16 PseudoStatic:1; ; < Pseudo-static -; OUT UINT16 Rambus:1; ; < RAMBUS -; OUT UINT16 Synchronous:1; ; < Synchronous -; OUT UINT16 Cmos:1; ; < CMOS -; OUT UINT16 Edo:1; ; < EDO -; OUT UINT16 WindowDram:1; ; < Window DRAM -; OUT UINT16 CacheDram:1; ; < Cache Dram -; OUT UINT16 NonVolatile:1; ; < Non-volatile -; OUT UINT16 Reserved2:3; ; < Reserved -DMI_T17_TYPE_DETAIL ENDS - - ; DMI Type 17 - Memory Device -TYPE17_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of - ; < Memory Devices that must be populated with all devices of - ; < the same type and size, and the set to which this device belongs. - DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. - TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. - PartNumber CHAR8 (19) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - ConfigSpeed UINT16 ? ; < Configured memory clock speed -TYPE17_DMI_INFO ENDS - - ; Memory DMI Type 17 and 20 - for memory use -MEM_DMI_INFO STRUCT - TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. - DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. - MemorySize UINT16 ? ; < The size of the memory device. - FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. - DeviceLocator UINT8 ? ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. - BankLocator UINT8 ? ; < The string number of the string that identifies the physically labeled bank where the memory device is located. - Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). - ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. - SerialNumber UINT8 (4) DUP (?) ; < Serial Number. - PartNumber UINT8 (18) DUP (?) ; < Part Number. - Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. - ExtSize UINT32 ? ; < Extended Size. - Socket UINT8 ? -; OUT UINT8 Socket:3 ; < Socket ID -; OUT UINT8 Channel:2 ; < Channel ID -; OUT UINT8 Dimm:2 ; < DIMM ID -; OUT UINT8 DimmPresent:1 ; < Dimm Present - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - ConfigSpeed UINT16 ? ; < Configured memory clock speed - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -MEM_DMI_INFO ENDS - - ; DMI Type 19 - Memory Array Mapped Address -TYPE19_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, - ; < of a range of memory mapped to the - ; < specified physical memory array. - EndingAddr UINT32 ? ; < The physical ending address of the - ; < last kilobyte of a range of addresses - ; < mapped to the specified physical memory array. - MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the physical memory array to which this - ; < address range is mapped. - PartitionWidth UINT8 ? ; < Identifies the number of memory devices that - ; < form a single row of memory for the address - ; < partition defined by this structure. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. - ExtEndingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the specified Physical Memory Array. -TYPE19_DMI_INFO ENDS - -; DMI Type 20 - Memory Device Mapped Address -TYPE20_DMI_INFO STRUCT - StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range - ; < of memory mapped to the referenced Memory Device. - EndingAddr UINT32 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with - ; < the Memory Device structure to which this address - ; < range is mapped. - MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated - ; < with the Memory Array Mapped Address structure to - ; < which this device address range is mapped. - PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory - ; < Device in a row of the address partition. - InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in - ; < an interleave. - InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the - ; < referenced Memory Device that are accessed in a - ; < single interleaved transfer. - ExtStartingAddr UINT64 ? ; < The physical address, in bytes, of a range of - ; < memory mapped to the referenced Memory Device. - ExtEndingAddr UINT64 ? ; < The physical ending address, in bytes, of the last of - ; < a range of addresses mapped to the referenced Memory Device. -TYPE20_DMI_INFO ENDS - - ; Collection of pointers to the DMI records -DMI_INFO STRUCT - T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc - T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 - T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 - T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 - T16 TYPE16_DMI_INFO {} ; < Type 16 struc - T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc - T19 TYPE19_DMI_INFO {} ; < Type 19 struc - T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc -DMI_INFO ENDS - - - -; ********************************************************************* -; * Interface call: AllocateExecutionCache -; ********************************************************************* - MAX_CACHE_REGIONS EQU 3 - - ; AllocateExecutionCache sub param structure for cached memory region -EXECUTION_CACHE_REGION STRUCT - ExeCacheStartAddr UINT32 ? ; < Start address - ExeCacheSize UINT32 ? ; < Size -EXECUTION_CACHE_REGION ENDS - -; ********************************************************************* -; * Interface call: AmdGetAvailableExeCacheSize -; ********************************************************************* - ; Get available Cache remain -AMD_GET_EXE_SIZE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - AvailableExeCacheSize UINT32 ? ; < Remain size -AMD_GET_EXE_SIZE_PARAMS ENDS - - - - - - - ; Selection type for core leveling - CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator - CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores - CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 - CORE_LEVEL_NONE EQU 3 ; < Do no leveling - CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit - CORE_LEVEL_ONE EQU 5 ; < Level to 1 core - CORE_LEVEL_THREE EQU 6 ; < Level to 3 cores - CORE_LEVEL_FOUR EQU 7 ; < Level to 4 cores - CORE_LEVEL_FIVE EQU 8 ; < Level to 5 cores - CORE_LEVEL_SIX EQU 9 ; < Level to 6 cores - CORE_LEVEL_SEVEN EQU 10 ; < Level to 7 cores - CORE_LEVEL_EIGHT EQU 11 ; < Level to 8 cores - CORE_LEVEL_NINE EQU 12 ; < Level to 9 cores - CORE_LEVEL_TEN EQU 13 ; < Level to 10 cores - CORE_LEVEL_ELEVEN EQU 14 ; < Level to 11 cores - CORE_LEVEL_TWELVE EQU 15 ; < Level to 12 cores - CORE_LEVEL_THIRTEEN EQU 16 ; < Level to 13 cores - CORE_LEVEL_FOURTEEN EQU 17 ; < Level to 14 cores - CORE_LEVEL_FIFTEEN EQU 18 ; < Level to 15 cores - CoreLevelModeMax EQU 19 ; < Used for bounds checking -CORE_LEVELING_TYPE TEXTEQU <DWORD> - - -; *********************************************************************** -; * -; * AGESA Basic Level interface structure definition and function prototypes -; * -; ********************************************************************** - -; ********************************************************************* -; * Interface call: AmdCreateStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdReleaseStruct -; ********************************************************************* - -; ********************************************************************* -; * Interface call: AmdInitReset -; ********************************************************************* - ; AmdInitReset param structure -AMD_RESET_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region - HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery - FchInterface FCH_RESET_INTERFACE {} ; Interface for FCH configuration -AMD_RESET_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEarly -; ********************************************************************* - ; InitEarly param structure - - ; Provide defaults or customizations to each service performed in AmdInitEarly. - -AMD_EARLY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The standard header - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface - GnbConfig GNB_CONFIGURATION {} ; < GNB configuration -AMD_EARLY_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitPost -; ********************************************************************* - ; AmdInitPost param structure -AMD_POST_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param -AMD_POST_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitEnv -; ********************************************************************* - ; AmdInitEnv param structure -AMD_ENV_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < platform operational characteristics. - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_ENV_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitMid -; ********************************************************************* - ; AmdInitMid param structure -AMD_MID_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_MID_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitLate -; ********************************************************************* - ; AmdInitLate param structure -AMD_LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - IvrsExclusionRangeList POINTER ? ; < IVMD exclusion range descriptor - DmiTable POINTER ? ; < DMI Interface - AcpiPState POINTER ? ; < Acpi Pstate SSDT Table - AcpiSrat POINTER ? ; < SRAT Table - AcpiSlit POINTER ? ; < SLIT Table - AcpiWheaMce POINTER ? ; < WHEA MCE Table - AcpiWheaCmc POINTER ? ; < WHEA CMC Table - AcpiAlib POINTER ? ; < ALIB Table - AcpiIvrs POINTER ? ; < IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table -AMD_LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdInitRecovery -; ********************************************************************* - ; CPU Recovery Parameters -AMD_CPU_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics -AMD_CPU_RECOVERY_PARAMS ENDS - - ; AmdInitRecovery param structure -AMD_RECOVERY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param - CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 - CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. -AMD_RECOVERY_PARAMS ENDS - - -; ********************************************************************* -; * Interface call: AmdInitResume -; ********************************************************************* - ; AmdInitResume param structure -AMD_RESUME_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_RESUME_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3LateRestore -; ********************************************************************* - ; AmdS3LateRestore param structure -AMD_S3LATE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Save state data -AMD_S3LATE_PARAMS ENDS - -; ********************************************************************* -; * Interface call: AmdS3Save -; ********************************************************************* - ; AmdS3Save param structure -AMD_S3SAVE_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Standard header - PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. - S3DataBlock AMD_S3_PARAMS {} ; < Standard header - FchInterface FCH_INTERFACE {} ; FCH configuration -AMD_S3SAVE_PARAMS ENDS - - ; General Services API - - -; ********************************************************************* -; * Interface service call: AmdGetApicId -; ********************************************************************* - ; Request the APIC ID of a particular core. - -AMD_APIC_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Core's Socket. - Core UINT8 ? ; < The Core id. - IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. - ApicAddress UINT8 ? ; < The Core's APIC ID. -AMD_APIC_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdGetPciAddress -; ********************************************************************* - ; Request the PCI Address of a Processor Module (that is, its Northbridge) - -AMD_GET_PCI_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The Processor's socket - Module UINT8 ? ; < The Module in that Processor - IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. - PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) -AMD_GET_PCI_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyCore -; ********************************************************************* - ; Request the identity (Socket, Module, Core) of the current Processor Core - -AMD_IDENTIFY_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - Socket UINT8 ? ; < The current Core's Socket - Module UINT8 ? ; < The current Core's Processor Module - Core UINT8 ? ; < The current Core's core id. -AMD_IDENTIFY_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdReadEventLog -; ********************************************************************* - ; An Event Log Entry. -EVENT_PARAMS STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. - EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". - DataParam1 UINT32 ? ; < Data specific to the Event. - DataParam2 UINT32 ? ; < Data specific to the Event. - DataParam3 UINT32 ? ; < Data specific to the Event. - DataParam4 UINT32 ? ; < Data specific to the Event. -EVENT_PARAMS ENDS - -; ********************************************************************* -; * Interface service call: AmdIdentifyDimm -; ********************************************************************* - ; Request the identity of dimm from system address - -AMD_IDENTIFY_DIMM STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. - MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. - SocketId UINT8 ? ; < The socket on which the targeted address locates. - MemChannelId UINT8 ? ; < The channel on which the targeted address locates. - DimmId UINT8 ? ; < The dimm on which the targeted address locates. -AMD_IDENTIFY_DIMM ENDS - - ; Data structure for the Mapping Item between Unified ID for IDS Setup Option - ; and the option value. - -IDS_NV_ITEM STRUCT - IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. - IdsNvValue UINT16 ? ; < The value of IDS Setup Option. -IDS_NV_ITEM ENDS - - ; Data Structure for IDS CallOut Function -IDS_CALLOUT_STRUCT STRUCT - StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service - IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table - Reserved UINT32 ? ; < reserved -IDS_CALLOUT_STRUCT ENDS - - AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored - AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure -; WARNING: Don't change the comment below, it used as signature for script -; AGESA IDS NV ID Definitions - AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id - - AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching - - AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated - AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST - - AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave - AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave - AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave - AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole - - AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data - AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM - AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache. - AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache - AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache - AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache - AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error - AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size - - AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable - AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode - AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32 - AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode - AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode - AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown - AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap - - AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist - AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode - - AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature - - AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket - AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port - AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency - AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width - AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width - - AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio - - AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost - - AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable - AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override - AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select - AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis - AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp - - AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy - AGESA_IDS_EXT_ID_END EQU 0027h; < specify the end of external NV ID - - IDS_EX_NV_ID TEXTEQU <DWORD> |