diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f15/Include/Ids.h')
-rw-r--r-- | src/vendorcode/amd/agesa/f15/Include/Ids.h | 1159 |
1 files changed, 0 insertions, 1159 deletions
diff --git a/src/vendorcode/amd/agesa/f15/Include/Ids.h b/src/vendorcode/amd/agesa/f15/Include/Ids.h deleted file mode 100644 index e980688711..0000000000 --- a/src/vendorcode/amd/agesa/f15/Include/Ids.h +++ /dev/null @@ -1,1159 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * AMD IDS Routines - * - * Contains AMD AGESA Integrated Debug Macros - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: IDS - * @e \$Revision: 55079 $ @e \$Date: 2011-06-16 03:48:27 -0600 (Thu, 16 Jun 2011) $ - */ -/***************************************************************************** - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - /* Macros to aid debugging */ - /* These definitions expand to zero (0) bytes of code when disabled */ - -#ifndef _IDS_H_ -#define _IDS_H_ - -#undef FALSE -#undef TRUE -#define FALSE 0 -#define TRUE 1 -// Proto type for optionsids.h -typedef UINT32 IDS_STATUS; ///< Status of IDS function. -#define IDS_SUCCESS ((IDS_STATUS) 0x00000000) ///< IDS Function is Successful. -#define IDS_UNSUPPORTED ((IDS_STATUS) 0xFFFFFFFF) ///< IDS Function is not existed. - -#define IDS_STRINGIZE(a) #a ///< for define stringize macro -#ifndef IDS_DEADLOOP - #define IDS_DEADLOOP() { volatile UINTN __i; __i = 1; while (__i); } -#endif -/** - * IDS Option Hook Points - * - * These are the values to indicate hook point in AGESA for IDS Options. - * - */ -typedef enum { //vv- for debug reference only - IDS_INIT_EARLY_BEFORE, ///< 00 Option Hook Point before AGESA function AMD_INIT_EARLY. - ///< IDS Object is initialized. - ///< Override CPU Core Leveling Mode. - ///< Set P-State in Post - IDS_INIT_EARLY_AFTER, ///< 01 Option Hook Point after AGESA function AMD_INIT_EARLY. - IDS_INIT_LATE_BEFORE, ///< 02 Option Hook Point before AGESA function AMD_INIT_LATE. - ///< It will be used to control the following tables. - ///< ACPI P-State Table (_PSS, XPSS, _PCT, _PSD, _PPC) - ///< ACPI SRAT Table - ///< ACPI SLIT Table - ///< ACPI WHEA Table - ///< DMI Table - IDS_INIT_LATE_AFTER, ///< 03 Option Hook Point after AGESA function AMD_INIT_LATE. - IDS_INIT_MID_BEFORE, ///< 04 Option Hook Point before AGESA function AMD_INIT_MID. - IDS_INIT_MID_AFTER, ///< 05 Option Hook Point after AGESA function AMD_INIT_MID. - IDS_INIT_POST_BEFORE, ///< 06 Option Hook Point before AGESA function AMD_INIT_POST. - ///< Control Interleaving and DRAM memory hole - ///< Override the setting of ECC Control - ///< Override the setting of Online Spare Rank - IDS_INIT_POST_AFTER, ///< 07 Option Hook Point after AGESA function AMD_INIT_POST. - IDS_INIT_RESET_BEFORE, ///< 08 Option Hook Point before AGESA function AMD_INIT_RESET. - IDS_INIT_RESET_AFTER, ///< 09 Option Hook Point after AGESA function AMD_INIT_RESET. - IDS_INIT_POST_MID, ///< 0a Option Hook Point after AGESA function AMD_INIT_POST. - IDS_BEFORE_S3_SAVE, ///< 0b override any settings before S3 save. - IDS_BEFORE_S3_RESTORE, ///< 0c override any settings before S3 restore - IDS_AFTER_S3_SAVE, ///< 0d Override any settings after S3 save - IDS_AFTER_S3_RESTORE, ///< 0e Override any settings after S3 restore - IDS_BEFORE_DQS_TRAINING, ///< 0f override any settings before DQS training - IDS_BEFORE_DRAM_INIT, ///< 10 override any settings before Dram initialization - IDS_BEFORE_MEM_FREQ_CHG, ///< 11 override settings before MemClk frequency change - IDS_BEFORE_WARM_RESET , ///< 12 Override PCI or MSR Registers Before Warm Reset - IDS_BEFORE_PCI_INIT, ///< 13 Override PCI or MSR Registers Before PCI Init - IDS_BEFORE_AP_EARLY_HALT, ///< 14 Option Hook Point before AP early halt - IDS_BEFORE_S3_RESUME, ///< 15 Option Hook Point before s3 resume - IDS_AFTER_S3_RESUME, ///< 16 Option Hook Point after s3 resume - IDS_BEFORE_PM_INIT, ///< 17 Option Hook Point Before Pm Init - - IDS_MT_BASE = 0x20, ///< 0x20 ~ 0x38 24 time points reserved for MTTime - - IDS_PLATFORM_RSVD1 = 0x38, ///< from 0x38 to 0x3f will reserved for platform used - IDS_PLATFORM_RSVD2 = 0x39, ///< from 0x38 to 0x3f will reserved for platform used - IDS_PLATFORM_RSVD3 = 0x3a, ///< from 0x38 to 0x3f will reserved for platform used - IDS_PLATFORM_RSVD4 = 0x3b, ///< from 0x38 to 0x3f will reserved for platform used - IDS_PLATFORM_RSVD5 = 0x3c, ///< from 0x38 to 0x3f will reserved for platform used - IDS_PLATFORM_RSVD6 = 0x3d, ///< from 0x38 to 0x3f will reserved for platform used - IDS_PLATFORM_RSVD7 = 0x3e, ///< from 0x38 to 0x3f will reserved for platform used - IDS_PLATFORM_RSVD8 = 0x3f, ///< from 0x38 to 0x3f will reserved for platform used - - // All the above timing point is used by BVM, their value should never be changed - IDS_HT_CONTROL, ///< 40 Override the setting of HT Link Control - IDS_HT_TRISTATE, ///< 41 Enable or Disable HT Tri-state during an LDTSTP# - IDS_INIT_DRAM_TABLE, ///< 42 Generate override table for Dram Timing - ///< Dram Controller, Drive Strength and DQS Timing - IDS_GET_DRAM_TABLE, ///< 43 Generate override table for Dram Timing - IDS_GANGING_MODE, ///< 44 override Memory Mode Unganged - IDS_POWERDOWN_MODE, ///< 45 override Power Down Mode - IDS_BURST_LENGTH32, ///< 46 override Burst Length32 - IDS_ALL_MEMORY_CLOCK, ///< 47 override All Memory Clks Enable - IDS_ECC, ///< 48 override ECC parameter - IDS_ECCSYMBOLSIZE, ///< 49 override ECC symbol size - IDS_CPU_Early_Override, ///< 4a override CPU early parameter - IDS_CACHE_FLUSH_HLT, ///< 4b override Cache Flush Hlt - IDS_CHANNEL_INTERLEAVE, ///< 4c override Channel Interleave - IDS_MEM_ERROR_RECOVERY, ///< 4d override memory error recovery - IDS_MEM_RETRAIN_TIMES, ///< 4e override memory retrain times - IDS_MEM_SIZE_OVERLAY, ///< 4f Override the syslimit - IDS_HT_ASSIST, ///< 50 Override Probe Filter - IDS_CHECK_NEGATIVE_WL, ///< 51 Check for negative write leveling result - IDS_DLL_SHUT_DOWN, ///< 52 Check for Dll Shut Down - IDS_POR_MEM_FREQ, ///< 53 Entry to enable/disable MemClk frequency enforcement - IDS_PHY_DLL_STANDBY_CTRL, ///< 54 Enable/Disable Phy DLL standby feature - IDS_PLATFORMCFG_OVERRIDE, ///< 55 Hook for Override PlatformConfig structure - IDS_LOADCARD_ERROR_RECOVERY, ///< 56 Special error handling for load card support - IDS_MEM_IGNORE_ERROR, ///< 57 Ignore error and do not do fatal exit in memory - IDS_GNB_SMU_SERVICE_CONFIG, ///< 58 Config GNB SMU service - IDS_GNB_ORBDYNAMIC_WAKE, ///< 59 config GNB dynamic wake - IDS_GNB_PLATFORMCFG_OVERRIDE, ///< 5a override ids gnb platform config - IDS_GNB_LCLK_DPM_EN, ///< 5b override GNB LCLK DPM configuration - IDS_GNB_LCLK_DEEP_SLEEP, ///< 5c override GNB LCLK DPM deep sleep - IDS_GNB_CLOCK_GATING, ///< 5d Override GNB Clock gating config - IDS_NB_PSTATE_DIDVID, ///< 5e Override NB P-state settings - IDS_CPB_CTRL, ///< 5f Config the Core peformance boost feature - IDS_HTC_CTRL, ///< 60 Hook for Hardware Thermal Control - IDS_CC6_WORKAROUND, ///< 61 Hook for skip CC6 work around - IDS_MEM_MR0, ///< 62 Hook for override Memory Mr0 register - IDS_REG_TABLE, ///< 63 Hook for add IDS register table to the loop - IDS_NBBUFFERALLOCATIONATEARLY, ///< 64 Hook for override North bridge bufer allocation - IDS_BEFORE_S3_SPECIAL, ///< 65 Hook to bypass S3 special functions - IDS_SET_PCI_REGISTER_ENTRY, ///< 66 Hook to SetRegisterForPciEntry - IDS_ERRATUM463_WORKAROUND, ///< 67 Hook to Erratum 463 workaround - IDS_BEFORE_MEMCLR, ///< 68 Hook before set Memclr bit - IDS_OVERRIDE_IO_CSTATE, ///< 69 Hook for override io C-state setting - IDS_NBPSDIS_OVERRIDE, ///< 6a Hook for override NB pstate disable setting - IDS_NBPS_REG_OVERRIDE, ///< 6b Hook for override Memory NBps reg - IDS_LOW_POWER_PSTATE, ///< 6c Hook for disalbe Low power_Pstates feature - IDS_CST_CREATE, ///< 6d Hook for create _CST - IDS_CST_SIZE, ///< 6e Hook for get _CST size - IDS_ENFORCE_VDDIO, ///< 6f Hook to override VDDIO - IDS_STRETCH_FREQUENCY_LIMIT, ///< 70 Hook for enforcing memory stretch frequency limit - IDS_INIT_MEM_REG_TABLE, ///< 71 Hook for init memory register table - IDS_SKIP_FUSED_MAX_RATE, ///< 72 Hook to skip fused max rate cap - IDS_FCH_INIT_AT_RESET, ///< 73 Hook for FCH reset parameter - IDS_FCH_INIT_AT_ENV, ///< 74 Hook for FCH ENV parameter - IDS_ENFORCE_PLAT_TABLES, ///< 75 Hook to enforce platform specific tables - IDS_NBPS_MIN_FREQ, ///< 76 Hook for override MIN nb ps freq - IDS_GNB_FORCE_CABLESAFE, ///< 77 Hook for override Force Cable Safe - IDS_SKIP_PM_TRANSITION_STEP, ///< 78 Hook for provide IDS ability to skip this PM step - IDS_GNB_PROPERTY, ///< 79 Hook for GNB Property - IDS_GNB_PCIE_POWER_GATING, ///< 7A Hook for GNB PCIe Power Gating - IDS_MEM_DYN_DRAM_TERM, ///< 7B Hook for Override Dynamic Dram Term - IDS_MEM_DRAM_TERM, ///< 7C Hook for Override Dram Term - IDS_TRACE_MODE, ///< 7D Trace Mode - IDS_GNB_ALTVDDNB, ///< 7E Hook for Override AltVddNB - IDS_UCODE, ///< 7F Enable or Disable microcode patching - IDS_FAM_REG_GMMX, ///< 80 GMMX register access - IDS_MEMORY_POWER_POLICY, ///< 81 Memory power policy - IDS_GET_STRETCH_FREQUENCY_LIMIT, ///< 82 Hook for enforcing memory stretch frequency limit - IDS_CPU_FEAT, ///< 83 Hook for runtime force cpu feature disable - IDS_OPTION_END, ///< 84 End of IDS option -} AGESA_IDS_OPTION; - -#include "OptionsIds.h" -#include "Filecode.h" - -/* Initialize IDS controls */ -#ifndef IDSOPT_IDS_ENABLED - #define IDSOPT_IDS_ENABLED FALSE -#endif - -#ifndef IDSOPT_CONTROL_ENABLED - #define IDSOPT_CONTROL_ENABLED FALSE -#endif - -#ifndef IDSOPT_CONTROL_NV_TO_CMOS - #define IDSOPT_CONTROL_NV_TO_CMOS FALSE -#endif - -#ifndef IDSOPT_TRACING_ENABLED - #define IDSOPT_TRACING_ENABLED FALSE -#endif - -#ifndef IDSOPT_TRACE_USER_OPTIONS - #define IDSOPT_TRACE_USER_OPTIONS TRUE -#endif - -#ifndef IDSOPT_PERF_ANALYSIS - #define IDSOPT_PERF_ANALYSIS FALSE -#endif - -#ifndef IDSOPT_HEAP_CHECKING - #define IDSOPT_HEAP_CHECKING FALSE -#endif - -#ifndef IDSOPT_ASSERT_ENABLED - #define IDSOPT_ASSERT_ENABLED FALSE -#endif - -#ifndef IDSOPT_ERROR_TRAP_ENABLED - #define IDSOPT_ERROR_TRAP_ENABLED FALSE -#endif - -#ifndef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE -#endif - -#ifndef IDSOPT_DEBUG_CODE_ENABLED - #define IDSOPT_DEBUG_CODE_ENABLED FALSE -#endif - -#ifndef IDSOPT_IDT_EXCEPTION_TRAP - #define IDSOPT_IDT_EXCEPTION_TRAP FALSE -#endif - -#ifndef IDSOPT_C_OPTIMIZATION_DISABLED - #define IDSOPT_C_OPTIMIZATION_DISABLED FALSE -#endif - -#if IDSOPT_IDS_ENABLED == FALSE - #undef IDSOPT_CONTROL_ENABLED - #undef IDSOPT_TRACING_ENABLED - #undef IDSOPT_PERF_ANALYSIS - #undef IDSOPT_HEAP_CHECKING - #undef IDSOPT_ASSERT_ENABLED - #undef IDSOPT_ERROR_TRAP_ENABLED - #undef IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - #undef IDSOPT_DEBUG_CODE_ENABLED - #undef IDSOPT_TRACE_USER_OPTIONS - - #define IDSOPT_CONTROL_ENABLED FALSE - #define IDSOPT_TRACING_ENABLED FALSE - #define IDSOPT_PERF_ANALYSIS FALSE - #define IDSOPT_HEAP_CHECKING FALSE - #define IDSOPT_ASSERT_ENABLED FALSE - #define IDSOPT_ERROR_TRAP_ENABLED FALSE - #define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED FALSE - #define IDSOPT_DEBUG_CODE_ENABLED FALSE - #define IDSOPT_TRACE_USER_OPTIONS FALSE -#endif - -/** - * Make a Progress Report to the User. - * - * This Macro is always enabled. The default action is to write the TestPoint value - * to an I/O port. The I/O port is 8 bits in size and the default address is 0x80. - * IBVs can change AGESA's default port by defining IDS_DEBUG_PORT to desired port - * in OptionsIds.h in their build tip. - * - * @param[in] TestPoint The value for display indicating progress - * @param[in,out] StdHeader Pointer of AMD_CONFIG_PARAMS - * - **/ - -#define AGESA_TESTPOINT(TestPoint, StdHeader) - -#ifndef IDS_DEBUG_PORT - #define IDS_DEBUG_PORT 0x80 -#endif - -/** - * @def STOP_HERE - * (macro) - Causes program to halt. This is @b only for use during active debugging . - * - * Causes the program to halt and display the file number of the source of the - * halt (displayed in decimal). - * - **/ -#if IDSOPT_IDS_ENABLED == TRUE - #ifdef STOP_CODE - #undef STOP_CODE - #endif - #define STOP_CODE (((UINT32)FILECODE)*0x10000 + \ - ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ - (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) - #define STOP_HERE IdsErrorStop (STOP_CODE); -#else - #define STOP_HERE STOP_HERE_Needs_To_Be_Removed //"WARNING: Debug code needs to be removed for production builds." -#endif - -/** - * @def ASSERT - * Test an assertion that the given statement is True. - * - * The statement is evaluated to a boolean value. If the statement is True, - * then no action is taken (no error). If the statement is False, a error stop - * is generated to halt the program. Used for testing for fatal errors that - * must be resolved before production. This is used to do parameter checks, - * bounds checking, range checks and 'sanity' checks. - * - * @param[in] conditional Assert that evaluating this conditional results in TRUE. - * - **/ -#ifndef ASSERT - #if IDSOPT_ASSERT_ENABLED == TRUE - #ifdef STOP_CODE - #undef STOP_CODE - #endif - #define STOP_CODE (((UINT32)FILECODE)*0x10000 + \ - ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ - (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) - - #define ASSERT(conditional) ((conditional) ? 0 : IdsAssert (STOP_CODE)); - #else - #define ASSERT(conditional) - #endif -#endif - -#if IDSOPT_CAR_CORRUPTION_CHECK_ENABLED == TRUE - #undef IDSOPT_ERROR_TRAP_ENABLED - #define IDSOPT_ERROR_TRAP_ENABLED TRUE - #define IDS_CAR_CORRUPTION_CHECK(StdHeader) -#else - #define IDS_CAR_CORRUPTION_CHECK(StdHeader) -#endif - -#ifndef DEBUG_CODE - #if IDSOPT_DEBUG_CODE_ENABLED == TRUE - #define DEBUG_CODE(Code) - #else - #define DEBUG_CODE(Code) - #endif -#endif - -/** - * @def IDS_ERROR_TRAP - * Trap AGESA Error events with stop code display. - * - * Works similarly to use of "ASSERT (FALSE);" - * - */ -#if IDSOPT_ERROR_TRAP_ENABLED == TRUE - #ifdef STOP_CODE - #undef STOP_CODE - #endif - #define STOP_CODE (((UINT32)FILECODE)*0x10000 + \ - ((__LINE__) % 10) + (((__LINE__ / 10) % 10)*0x10) + \ - (((__LINE__ / 100) % 10)*0x100) + (((__LINE__ / 1000) % 10)*0x1000)) - - #define IDS_ERROR_TRAP IdsErrorStop (STOP_CODE) -#else - #define IDS_ERROR_TRAP -#endif - -///give the extended Macro default value -#ifndef __IDS_EXTENDED__ - #define IDS_EXTENDED_HOOK(idsoption, dataptr, idsnvptr, stdheader) IDS_SUCCESS - #define IDS_INITIAL_F10_PM_STEP - #define IDS_INITIAL_F12_PM_STEP - #define IDS_INITIAL_F14_PM_STEP - #define IDS_INITIAL_F15_OR_PM_STEP - #define IDS_INITIAL_F15_TN_PM_STEP - #define IDS_EXTENDED_GET_DATA_EARLY(data, StdHeader) - #define IDS_EXTENDED_GET_DATA_LATE(data, StdHeader) - #define IDS_EXTENDED_HEAP_SIZE 0 - #define IDS_EXT_INCLUDE_F10(file) - #define IDS_EXT_INCLUDE_F12(file) - #define IDS_EXT_INCLUDE_F14(file) - #define IDS_EXT_INCLUDE_F15(file) - #define IDS_EXT_INCLUDE(file) - #define IDS_PAD_4K -#endif - -#ifndef IDS_NUM_NV_ITEM - #define IDS_NUM_NV_ITEM (IDS_NUM_EXT_NV_ITEM) -#endif - -#define IDS_CMOS_INDEX_PORT 0x70 -#define IDS_CMOS_DATA_PORT 0x71 -#define IDS_CMOS_REGION_START 0x20 -#define IDS_CMOS_REGION_END 0x7F -#define IDS_AP_GET_NV_FROM_CMOS(x) FALSE - -#if IDSOPT_CONTROL_ENABLED == TRUE - #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) - - #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) - #if IDSOPT_CONTROL_NV_TO_CMOS == TRUE - #undef IDS_AP_GET_NV_FROM_CMOS - #define IDS_AP_GET_NV_FROM_CMOS(x) - #ifdef IDS_OPT_CMOS_INDEX_PORT - #undef IDS_CMOS_INDEX_PORT - #define IDS_CMOS_INDEX_PORT IDS_OPT_CMOS_INDEX_PORT - #endif - - #ifdef IDS_OPT_CMOS_DATA_PORT - #undef IDS_CMOS_DATA_PORT - #define IDS_CMOS_DATA_PORT IDS_OPT_CMOS_DATA_PORT - #endif - - #ifdef IDS_OPT_CMOS_REGION_START - #undef IDS_CMOS_REGION_START - #define IDS_CMOS_REGION_START IDS_OPT_CMOS_REGION_START - #endif - - #ifdef IDS_OPT_CMOS_REGION_END - #undef IDS_CMOS_REGION_END - #define IDS_CMOS_REGION_END IDS_OPT_CMOS_REGION_END - #endif - #endif -#else - #define IDS_OPTION_HOOK(IdsOption, DataPtr, StdHeader) - - #define IDS_OPTION_CALLOUT(CallOutId, DataPtr, StdHeader) AGESA_SUCCESS -#endif - -/** - * Macro to add a *skip* hook for IDS options - * - * The default minimal action is to do nothing and there is no any code to increase. - * For debug environments, IDS dispatcher function will be called to perform - * the detailed action and to skip AGESA code if necessary. - * - * @param[in] IdsOption IDS Option ID for this hook point - * @param[in, out] DataPtr Data Pointer to override - * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS - * - * - **/ - -#if IDSOPT_CONTROL_ENABLED == TRUE - #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) -#else - #define IDS_SKIP_HOOK(IdsOption, DataPtr, StdHeader) -#endif - -/** - * Macro to add a heap manager routine - * - * when memory is allocated the heap manager actually allocates two extra dwords of data, - * one dword buffer before the actual memory, and one dword afterwards. - * a complete heap walk and check to be performed at any time. - * it would ASSERT if the heap is corrupt - * - * @param[in] StdHeader Pointer of AMD_CONFIG_PARAMS - * - * - **/ - -// Heap debug feature -#define SENTINEL_BEFORE_VALUE 0x64616548 // "Head" -#define SENTINEL_AFTER_VALUE 0x6C696154 // "Tail" -#if IDSOPT_IDS_ENABLED == TRUE - #if IDSOPT_HEAP_CHECKING == TRUE - #define SIZE_OF_SENTINEL 4 - #define NUM_OF_SENTINEL 2 // Before ("Head") and After ("Tail") - #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + AlignTo16Byte) = SENTINEL_BEFORE_VALUE); - #define SET_SENTINEL_AFTER(NodePtr) (*(UINT32 *) ((UINT8 *) NodePtr + sizeof (BUFFER_NODE) + NodePtr->BufferSize - SIZE_OF_SENTINEL) = SENTINEL_AFTER_VALUE); - #define Heap_Check(stdheader) - #else - #define SIZE_OF_SENTINEL 0 - #define NUM_OF_SENTINEL 0 - #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) - #define SET_SENTINEL_AFTER(NodePtr) - #define Heap_Check(stdheader) - #endif -#else - #define SIZE_OF_SENTINEL 0 - #define NUM_OF_SENTINEL 0 - #define SET_SENTINEL_BEFORE(NodePtr, AlignTo16Byte) - #define SET_SENTINEL_AFTER(NodePtr) - #define Heap_Check(stdheader) -#endif - -/** - * Macro to add IDT for debugging exception. - * - * A debug feature. Adding a 'jmp $' into every exception handler. - * So debugger could use HDT to skip 'jmp $' and execute the iret, - * then they could find which instruction cause the exception. - * - * @param[in] FunctionId IDS Function ID for this hook point - * @param[in, out] DataPtr Data Pointer to override - * @param[in, out] StdHeader Pointer of AMD_CONFIG_PARAMS - * - * - **/ -#if IDSOPT_IDS_ENABLED == TRUE - #if IDSOPT_IDT_EXCEPTION_TRAP == TRUE - #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) - #else - #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) - #endif -#else - #define IDS_EXCEPTION_TRAP(FunctionId, DataPtr, StdHeader) -#endif - - - - -/** - * Macro to add HDT OUT - * - * The default minimal action is to do nothing and there is no any code to increase. - * For debug environments, the debug information can be displayed in HDT or other - * devices. - * - **/ -#if IDSOPT_IDS_ENABLED == TRUE - #if IDSOPT_TRACING_ENABLED == TRUE - #define IDS_HDT_CONSOLE_INIT(x) - #define IDS_HDT_CONSOLE_EXIT(x) - #define IDS_HDT_CONSOLE_S3_EXIT(x) - #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) - - #ifndef __GNUC__ - #pragma warning(disable: 4127) - #define IDS_HDT_CONSOLE(f, s, ...) - #else - #define IDS_HDT_CONSOLE(f, s, ...) printk (BIOS_DEBUG, s, ##__VA_ARGS__); - #endif - - #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) - #define IDS_HDT_CONSOLE_ASSERT(x) - #define IDS_FUNCLIST_ADDR NULL - #define IDS_FUNCLIST_EXTERN() - #define IDS_TIMEOUT_CTL(t) - #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) - //#define CONSOLE(s, ...) - #else - #define IDS_HDT_CONSOLE_INIT(x) - #define IDS_HDT_CONSOLE_EXIT(x) - #define IDS_HDT_CONSOLE_S3_EXIT(x) - #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) - #define IDS_HDT_CONSOLE(f, s, ...) - #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) - #define IDS_HDT_CONSOLE_ASSERT(x) - #define IDS_FUNCLIST_ADDR NULL - #define IDS_FUNCLIST_EXTERN() - #define IDS_TIMEOUT_CTL(t) - #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) - //#define CONSOLE(s, ...) CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds." - #endif -#else - #define IDS_HDT_CONSOLE_INIT(x) - #define IDS_HDT_CONSOLE_EXIT(x) - #define IDS_HDT_CONSOLE_S3_EXIT(x) - #define IDS_HDT_CONSOLE_S3_AP_EXIT(x) - #define IDS_HDT_CONSOLE(f, s, ...) - #define IDS_HDT_CONSOLE_FLUSH_BUFFER(x) - #define IDS_HDT_CONSOLE_ASSERT(x) - #define IDS_FUNCLIST_ADDR NULL - #define IDS_FUNCLIST_EXTERN() - #define IDS_TIMEOUT_CTL(t) - #define IDS_HDT_CONSOLE_DEBUG_CODE(Code) -// #define CONSOLE(s, ...) CONSOLE_Needs_To_Be_Removed_For_Production_Build //"WARNING: CONSOLE needs to be removed for production builds." -#endif - -#define IDS_TRACE_SHOW_BLD_OPT_CFG IDSOPT_TRACE_USER_OPTIONS - -#if IDSOPT_PERF_ANALYSIS == TRUE - #define IDS_PERF_TIMESTAMP(StdHeader, TestPoint) - #define IDS_PERF_ANALYSE(StdHeader) - #define IDS_PERF_TIME_MEASURE(StdHeader) -#else - #define IDS_PERF_TIMESTAMP(StdHeader, TestPoint) - #define IDS_PERF_ANALYSE(StdHeader) - #define IDS_PERF_TIME_MEASURE(StdHeader) -#endif - -///For IDS feat use -#define IDS_FAMILY_ALL 0xFFFFFFFFFFFFFFFFull -#define IDS_BSP_ONLY TRUE -#define IDS_ALL_CORES FALSE - -#define IDS_LATE_RUN_AP_TASK_ID PROC_IDS_LIBRARY_IDSLIB_FILECODE - -#define IDS_CALLOUT_INIT 0x01 ///< The function data of IDS callout function of initialization. - -/// Function entry for HDT script to call -typedef struct _SCRIPT_FUNCTION { - UINTN FuncAddr; ///< Function address in ROM - CHAR8 FuncName[40]; ///< Function name -} SCRIPT_FUNCTION; - -/// Data Structure for Mem ECC parameter override -typedef struct { - IN BOOLEAN CfgEccRedirection; ///< ECC Redirection - IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate - IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate - IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate - IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate - IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate - IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood -} ECC_OVERRIDE_STRUCT; - - - - -/** - * AGESA Test Points - * - * These are the values displayed to the user to indicate progress through boot. - * These can be used in a debug environment to stop the debugger at a specific - * test point: - * For SimNow!, this command - * bi 81 w vb 49 - * will stop the debugger on one of the TracePoints (49 is the TP value in this example). - * - */ -typedef enum { - StartProcessorTestPoints, ///< 00 Entry used for range testing for @b Processor related TPs - - // Memory test points - TpProcMemBeforeMemDataInit, ///< 01 .. Memory structure initialization (Public interface) - TpProcMemBeforeSpdProcessing, ///< 02 .. SPD Data processing (Public interface) - TpProcMemAmdMemAuto, ///< 03 .. Memory configuration (Public interface) - TpProcMemDramInit, ///< 04 .. DRAM initialization - TpProcMemSPDChecking, ///< 05 .. - TpProcMemModeChecking, ///< 06 .. - TpProcMemSpeedTclConfig, ///< 07 .. Speed and TCL configuration - TpProcMemSpdTiming, ///< 08 .. - TpProcMemDramMapping, ///< 09 .. - TpProcMemPlatformSpecificConfig, ///< 0A .. - TPProcMemPhyCompensation, ///< 0B .. - TpProcMemStartDcts, ///< 0C .. - TpProcMemBeforeDramInit, ///< 0D .. (Public interface) - TpProcMemPhyFenceTraining, ///< 0E .. - TpProcMemSynchronizeDcts, ///< 0F .. - TpProcMemSystemMemoryMapping, ///< 10 .. - TpProcMemMtrrConfiguration, ///< 11 .. - TpProcMemDramTraining, ///< 12 .. - TpProcMemBeforeAnyTraining, ///< 13 .. (Public interface) - TpProcMemWriteLevelizationTraining, ///< 14 .. - TpProcMemWlFirstPass, ///< 15 .. Below 800Mhz first pass start - TpProcMemWlSecondPass, ///< 16 .. Above 800Mhz second pass start - TpProcMemWlTrainTargetDimm, ///< 17 .. Target DIMM configured - TpProcMemWlPrepDimms, ///< 18 .. Prepare DIMMS for WL - TpProcMemWlConfigDimms, ///< 19 .. Configure DIMMS for WL - TpProcMemReceiverEnableTraining, ///< 1A .. - TpProcMemRcvrStartSweep, ///< 1B .. Start sweep loop - TpProcMemRcvrSetDelay, ///< 1C .. Set receiver Delay - TpProcMemRcvrWritePattern, ///< 1D .. Write test pattern - TpProcMemRcvrReadPattern, ///< 1E .. Read test pattern - TpProcMemRcvrTestPattern, ///< 1F .. Compare test pattern - TpProcMemRcvrCalcLatency, ///< 20 .. Calculate MaxRdLatency per channel - TpProcMemReceiveDqsTraining, ///< 21 .. - TpProcMemRcvDqsSetDelay, ///< 22 .. Set Write Data delay - TpProcMemRcvDqsWritePattern, ///< 23 .. Write test pattern - TpProcMemRcvDqsStartSweep, ///< 24 .. Start read sweep - TpProcMemRcvDqsSetRcvDelay, ///< 25 .. Set Receive DQS delay - TpProcMemRcvDqsReadPattern, ///< 26 .. Read Test pattern - TpProcMemRcvDqsTstPattern, ///< 27 .. Compare Test pattern - TpProcMemRcvDqsResults, ///< 28 .. Update results - TpProcMemRcvDqsFindWindow, ///< 29 .. Start Find passing window - TpProcMemTransmitDqsTraining, ///< 2A .. - TpProcMemTxDqStartSweep, ///< 2B .. Start write sweep - TpProcMemTxDqSetDelay, ///< 2C .. Set Transmit DQ delay - TpProcMemTxDqWritePattern, ///< 2D .. Write test pattern - TpProcMemTxDqReadPattern, ///< 2E .. Read Test pattern - TpProcMemTxDqTestPattern, ///< 2F .. Compare Test pattern - TpProcMemTxDqResults, ///< 30 .. Update results - TpProcMemTxDqFindWindow, ///< 31 .. Start Find passing window - TpProcMemMaxRdLatencyTraining, ///< 32 .. - TpProcMemMaxRdLatStartSweep, ///< 33 .. Start sweep - TpProcMemMaxRdLatSetDelay, ///< 34 .. Set delay - TpProcMemMaxRdLatWritePattern, ///< 35 .. Write test pattern - TpProcMemMaxRdLatReadPattern, ///< 36 .. Read Test pattern - TpProcMemMaxRdLatTestPattern, ///< 37 .. Compare Test pattern - TpProcMemOnlineSpareInit, ///< 38 .. Online Spare init - TpProcMemBankInterleaveInit, ///< 39 .. Bank Interleave Init - TpProcMemNodeInterleaveInit, ///< 3A .. Node Interleave Init - TpProcMemChannelInterleaveInit, ///< 3B .. Channel Interleave Init - TpProcMemEccInitialization, ///< 3C .. ECC initialization - TpProcMemPlatformSpecificInit, ///< 3D .. Platform Specific Init - TpProcMemBeforeAgesaReadSpd, ///< 3E .. Before callout for "AgesaReadSpd" - TpProcMemAfterAgesaReadSpd, ///< 3F .. After callout for "AgesaReadSpd" - TpProcMemBeforeAgesaHookBeforeDramInit, ///< 40 .. Before optional callout "AgesaHookBeforeDramInit" - TpProcMemAfterAgesaHookBeforeDramInit, ///< 41 .. After optional callout "AgesaHookBeforeDramInit" - TpProcMemBeforeAgesaHookBeforeDQSTraining, ///< 42 .. Before optional callout "AgesaHookBeforeDQSTraining" - TpProcMemAfterAgesaHookBeforeDQSTraining, ///< 43 .. After optional callout "AgesaHookBeforeDQSTraining" - TpProcMemBeforeAgesaHookBeforeExitSelfRef, ///< 44 .. Before optional callout "AgesaHookBeforeDramInit" - TpProcMemAfterAgesaHookBeforeExitSelfRef, ///< 45 .. After optional callout "AgesaHookBeforeDramInit" - TpProcMemAfterMemDataInit, ///< 46 .. After MemDataInit - TpProcMemInitializeMCT, ///< 47 .. Before InitializeMCT - TpProcMemLvDdr3, ///< 48 .. Before LV DDR3 - TpProcMemInitMCT, ///< 49 .. Before InitMCT - TpProcMemOtherTiming, ///< 4A.. Before OtherTiming - TpProcMemUMAMemTyping, ///< 4B .. Before UMAMemTyping - TpProcMemSetDqsEccTmgs, ///< 4C .. Before SetDqsEccTmgs - TpProcMemMemClr, ///< 4D .. Before MemClr - TpProcMemOnDimmThermal, ///< 4E .. Before On DIMM Thermal - TpProcMemDmi, ///< 4F .. Before DMI - TpProcMemEnd, ///< 50 .. End of memory code - - // CPU test points - TpProcCpuEntryDmi, ///< 51 .. Entry point CreateDmiRecords - TpProcCpuEntryPstate, ///< 52 .. Entry point GenerateSsdt - TpProcCpuEntryPstateLeveling, ///< 53 .. Entry point PStateLeveling - TpProcCpuEntryPstateGather, ///< 54 .. Entry point PStateGatherData - TpProcCpuEntryWhea, ///< 55 .. Entry point CreateAcpiWhea - TpProcCpuEntrySrat, ///< 56 .. Entry point CreateAcpiSrat - TpProcCpuEntrySlit, ///< 57 .. Entry point CreateAcpiSlit - TpProcCpuProcessRegisterTables, ///< 58 .. Register table processing - TpProcCpuSetBrandID, ///< 59 .. Set brand ID - TpProcCpuLocalApicInit, ///< 5A .. Initialize local APIC - TpProcCpuLoadUcode, ///< 5B .. Load microcode patch - TpProcCpuBeforePMFeatureInit, ///< 5C .. BeforePM feature dispatch point - TpProcCpuPowerMgmtInit, ///< 5D .. Power Management table processing - TpProcCpuEarlyFeatureInit, ///< 5E .. Early feature dispatch point - TpProcCpuCoreLeveling, ///< 5F .. Core Leveling - TpProcCpuApMtrrSync, ///< 60 .. AP MTRR sync up - TpProcCpuPostFeatureInit, ///< 61 .. POST feature dispatch point - TpProcCpuFeatureLeveling, ///< 62 .. CPU Feature Leveling - TpProcCpuBeforeRelinquishAPsFeatureInit, ///< 63 .. Before Relinquishing control of APs feature dispatch point - TpProcCpuBeforeAllocateWheaBuffer, ///< 64 .. Before the WHEA init code calls out to allocate a buffer - TpProcCpuAfterAllocateWheaBuffer, ///< 65 .. After the WHEA init code calls out to allocate a buffer - TpProcCpuBeforeAllocateSratBuffer, ///< 66 .. Before the SRAT init code calls out to allocate a buffer - TpProcCpuAfterAllocateSratBuffer, ///< 67 .. After the SRAT init code calls out to allocate a buffer - TpProcCpuBeforeLocateSsdtBuffer, ///< 68 .. Before the P-state init code calls out to locate a buffer - TpProcCpuAfterLocateSsdtBuffer, ///< 69 .. After the P-state init code calls out to locate a buffer - TpProcCpuBeforeAllocateSsdtBuffer, ///< 6A .. Before the P-state init code calls out to allocate a buffer - TpProcCpuAfterAllocateSsdtBuffer, ///< 6B .. After the P-state init code calls out to allocate a buffer - - // HT test points - TpProcHtEntry = 0x71, ///< 71 .. Coherent Discovery begin (Public interface) - TpProcHtTopology, ///< 72 .. Topology match, routing, begin - TpProcHtManualNc, ///< 73 .. Manual Non-coherent Init begin - TpProcHtAutoNc, ///< 74 .. Automatic Non-coherent init begin - TpProcHtOptGather, ///< 75 .. Optimization: Gather begin - TpProcHtOptRegang, ///< 76 .. Optimization: Regang begin - TpProcHtOptLinks, ///< 77 .. Optimization: Link Begin - TpProcHtOptSubLinks, ///< 78 .. Optimization: Sublinks begin - TpProcHtOptFinish, ///< 79 .. Optimization: Set begin - TpProcHtTrafficDist, ///< 7A .. Traffic Distribution begin - TpProcHtTuning, ///< 7B .. Misc Tuning Begin - TpProcHtDone, ///< 7C .. HT Init complete - TpProcHtApMapEntry, ///< 7D .. AP HT: Init Maps begin - TpProcHtApMapDone, ///< 7E .. AP HT: Complete - - // Extended memory test point - TpProcMemSendMRS2 = 0x80, ///< 80 .. Sending MRS2 - TpProcMemSendMRS3, ///< 81 .. Sedding MRS3 - TpProcMemSendMRS1, ///< 82 .. Sending MRS1 - TpProcMemSendMRS0, ///< 83 .. Sending MRS0 - TpProcMemContinPatternGenRead, ///< 84 .. Continuous Pattern Read - TpProcMemContinPatternGenWrite, ///< 85 .. Continuous Pattern Write - TpProcMem__RdDqsTraining, ///< 86 .. Mem: RdDqs Training begin - TpProcMemBefore__TrainExtVrefChange,///< 87 .. Mem: Before optional callout to platfrom BIOS to change External Vref during training - TpProcMemAfter__TrainExtVrefChange, ///< 88 .. Mem: After optional callout to platfrom BIOS to change External Vref during training - - StartNbTestPoints = 0x90, ///< 90 Entry used for range testing for @b NorthBridge related TPs - TpNbxxx, ///< 91 . - EndNbTestPoints, ///< 92 End of TP range for NB - - StartFchTestPoints = 0xB0, ///< B0 Entry used for range testing for @b FCH related TPs - TpFchInitResetDispatching, ///< B1 .. FCH InitReset dispatch point - TpFchGppBeforePortTraining, ///< B2 .. Before FCH GPP port training - TpFchGppGen1PortPolling, ///< B3 .. FCH GPP port polling with GEN1 speed - TpFchGppGen2PortPolling, ///< B4 .. FCH GPP port polling with GEN2 speed - TpFchGppAfterPortTraining, ///< B5 .. After FCH GPP port training - TpFchInitEnvDispatching, ///< B6 .. FCH InitEnv dispatch point - TpFchInitMidDispatching, ///< B7 .. FCH InitMid dispatch point - TpFchInitLateDispatching, ///< B8 .. FCH InitLate dispatch point - TpFchGppHotPlugging, ///< B9 .. FCH GPP hot plug event - TpFchGppHotUnplugging, ///< BA .. AFCH GPP hot unplug event - TpFchInitS3EarlyDispatching, ///< BB .. FCH InitS3Early dispatch point - TpFchInitS3LateDispatching, ///< BC .. FCH InitS3Late dispatch point - EndFchTestPoints, ///< BF End of TP range for FCH - - // Interface test points - TpIfAmdInitResetEntry = 0xC0, ///< C0 .. Entry to AmdInitReset - TpIfAmdInitResetExit, ///< C1 .. Exiting from AmdInitReset - TpIfAmdInitRecoveryEntry, ///< C2 .. Entry to AmdInitRecovery - TpIfAmdInitRecoveryExit, ///< C3 .. Exiting from AmdInitRecovery - TpIfAmdInitEarlyEntry, ///< C4 .. Entry to AmdInitEarly - TpIfAmdInitEarlyExit, ///< C5 .. Exiting from AmdInitEarly - TpIfAmdInitPostEntry, ///< C6 .. Entry to AmdInitPost - TpIfAmdInitPostExit, ///< C7 .. Exiting from AmdInitPost - TpIfAmdInitEnvEntry, ///< C8 .. Entry to AmdInitEnv - TpIfAmdInitEnvExit, ///< C9 .. Exiting from AmdInitEnv - TpIfAmdInitMidEntry, ///< CA .. Entry to AmdInitMid - TpIfAmdInitMidExit, ///< CB .. Exiting from AmdInitMid - TpIfAmdInitLateEntry, ///< CC .. Entry to AmdInitLate - TpIfAmdInitLateExit, ///< CD .. Exiting from AmdInitLate - TpIfAmdS3SaveEntry, ///< CE .. Entry to AmdS3Save - TpIfAmdS3SaveExit, ///< CF .. Exiting from AmdS3Save - TpIfAmdInitResumeEntry, ///< D0 .. Entry to AmdInitResume - TpIfAmdInitResumeExit, ///< D1 .. Exiting from AmdInitResume - TpIfAmdS3LateRestoreEntry, ///< D2 .. Entry to AmdS3LateRestore - TpIfAmdS3LateRestoreExit, ///< D3 .. Exiting from AmdS3LateRestore - TpIfAmdLateRunApTaskEntry, ///< D4 .. Entry to AmdS3LateRestore - TpIfAmdLateRunApTaskExit, ///< D5 .. Exiting from AmdS3LateRestore - TpIfAmdReadEventLogEntry, ///< D6 .. Entry to AmdReadEventLog - TpIfAmdReadEventLogExit, ///< D7 .. Exiting from AmdReadEventLog - TpIfAmdGetApicIdEntry, ///< D8 .. Entry to AmdGetApicId - TpIfAmdGetApicIdExit, ///< D9 .. Exiting from AmdGetApicId - TpIfAmdGetPciAddressEntry, ///< DA .. Entry to AmdGetPciAddress - TpIfAmdGetPciAddressExit, ///< DB .. Exiting from AmdGetPciAddress - TpIfAmdIdentifyCoreEntry, ///< DC .. Entry to AmdIdentifyCore - TpIfAmdIdentifyCoreExit, ///< DD .. Exiting from AmdIdentifyCore - TpIfBeforeRunApFromIds, ///< DE .. After IDS calls out to run code on an AP - TpIfAfterRunApFromIds, ///< DF .. After IDS calls out to run code on an AP - TpIfBeforeGetIdsData, ///< E0 .. Before IDS calls out to get IDS data - TpIfAfterGetIdsData, ///< E1 .. After IDS calls out to get IDS data - TpIfBeforeAllocateHeapBuffer, ///< E2 .. Before the heap manager calls out to allocate a buffer - TpIfAfterAllocateHeapBuffer, ///< E3 .. After the heap manager calls out to allocate a buffer - TpIfBeforeDeallocateHeapBuffer, ///< E4 .. Before the heap manager calls out to deallocate a buffer - TpIfAfterDeallocateHeapBuffer, ///< E5 .. After the heap manager calls out to deallocate a buffer - TpIfBeforeLocateHeapBuffer, ///< E6 .. Before the heap manager calls out to locate a buffer - TpIfAfterLocateHeapBuffer, ///< E7 .. After the heap manager calls out to locate a buffer - TpIfBeforeRunApFromAllAps, ///< E8 .. Before the BSP calls out to run code on an AP - TpIfAfterRunApFromAllAps, ///< E9 .. After the BSP calls out to run code on an AP - TpIfBeforeRunApFromAllCore0s, ///< EA .. Before the BSP calls out to run code on an AP - TpIfAfterRunApFromAllCore0s, ///< EB .. After the BSP calls out to run code on an AP - TpIfBeforeAllocateS3SaveBuffer, ///< EC .. Before the S3 save code calls out to allocate a buffer - TpIfAfterAllocateS3SaveBuffer, ///< ED .. After the S3 save code calls out to allocate a buffer - TpIfBeforeAllocateMemoryS3SaveBuffer, ///< EE .. Before the memory S3 save code calls out to allocate a buffer - TpIfAfterAllocateMemoryS3SaveBuffer, ///< EF .. After the memory S3 save code calls out to allocate a buffer - TpIfBeforeLocateS3PciBuffer, ///< F0 .. Before the memory code calls out to locate a buffer - TpIfAfterLocateS3PciBuffer, ///< F1 .. After the memory code calls out to locate a buffer - TpIfBeforeLocateS3CPciBuffer, ///< F2 .. Before the memory code calls out to locate a buffer - TpIfAfterLocateS3CPciBuffer, ///< F3 .. After the memory code calls out to locate a buffer - TpIfBeforeLocateS3MsrBuffer, ///< F4 .. Before the memory code calls out to locate a buffer - TpIfAfterLocateS3MsrBuffer, ///< F5 .. After the memory code calls out to locate a buffer - TpIfBeforeLocateS3CMsrBuffer, ///< F6 .. Before the memory code calls out to locate a buffer - TpIfAfterLocateS3CMsrBuffer, ///< F7 .. After the memory code calls out to locate a buffer - TpPerfUnit, ///< F8 .. The Unit of performance measure. - EndAgesaTps = 0xFF, ///< Last defined AGESA TP -} AGESA_TP; - -///Ids Feat description -typedef enum { - IDS_FEAT_UCODE_UPDATE = 0x0000, ///< Feat for Ucode Update - IDS_FEAT_TARGET_PSTATE, ///< Feat for Target Pstate - IDS_FEAT_POSTPSTATE, ///< Feat for Post Pstate - IDS_FEAT_ECC_CTRL, ///< Feat for Ecc Control - IDS_FEAT_ECC_SYMBOL_SIZE, ///< Feat for Ecc symbol size - IDS_FEAT_DCT_ALLMEMCLK, ///< Feat for all memory clock - IDS_FEAT_DCT_GANGMODE, ///< Feat for Dct gang mode - IDS_FEAT_DCT_BURSTLENGTH, ///< Feat for dct burst length - IDS_FEAT_DCT_POWERDOWN, ///< Feat for dct power down - IDS_FEAT_DCT_DLLSHUTDOWN, ///< Feat for dct dll shut down - IDS_FEAT_PROBE_FILTER, ///< Feat for probe filter - IDS_FEAT_HDTOUT, ///< Feat for hdt out - IDS_FEAT_HT_SETTING, ///< Feat for Ht setting - IDS_FEAT_GNB_PLATFORMCFG, ///< Feat for override GNB platform config - IDS_FEAT_CPB_CTRL, ///< Feat for Config the Core peformance boost feature - IDS_FEAT_HTC_CTRL, ///< Feat for Hardware Thermal Control - IDS_FEAT_MEMORY_MAPPING, ///< Feat for Memory Mapping - IDS_FEAT_POWER_POLICY, ///< Feat for Power Policy - IDS_FEAT_NV_TO_CMOS, ///< Feat for Save BSP Nv to CMOS - IDS_FEAT_COMMON, ///< Common Feat - IDS_FEAT_END = 0xFF ///< End of Common feat -} IDS_FEAT; - -///Ids IDT table function ID -typedef enum { - IDS_IDT_REPLACE_IDTR_FOR_BSC = 0x0000, ///< Function ID for saving IDTR for BSC - IDS_IDT_RESTORE_IDTR_FOR_BSC, ///< Function ID for restoring IDTR for BSC - IDS_IDT_UPDATE_EXCEPTION_VECTOR_FOR_AP, ///< Function ID for updating exception vector -} IDS_IDT_FUNC_ID; - -typedef IDS_STATUS IDS_COMMON_FUNC ( - IN OUT VOID *DataPtr, - IN OUT AMD_CONFIG_PARAMS *StdHeader, - IN IDS_NV_ITEM *IdsNvPtr - ); - -typedef IDS_COMMON_FUNC *PIDS_COMMON_FUNC; - -/// Data Structure of IDS Feature block -typedef struct _IDS_FAMILY_FEAT_STRUCT { - IDS_FEAT IdsFeat; ///< Ids Feat ID - BOOLEAN IsBsp; ///< swith for Bsp check - AGESA_IDS_OPTION IdsOption; ///< IDS option - UINT64 CpuFamily; ///< - PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function -} IDS_FAMILY_FEAT_STRUCT; - - -/// Data Structure of IDS option -typedef struct _IDS_OPTION_STRUCT { - AGESA_IDS_OPTION idsoption; ///< IDS option - PIDS_COMMON_FUNC pf_idsoption; ///<pointer to function -} IDS_OPTION_STRUCT; - -/// Data Structure of IDS option table -typedef struct _IDS_OPTION_STRUCT_TBL { - UINT8 version; ///<Version of IDS option table - UINT16 size; ///<Size of IDS option table - CONST IDS_OPTION_STRUCT *pIdsOptionStruct; ///<pointer to array of structure -} IDS_OPTION_STRUCT_TBL; - -#define IDS_NV_TO_CMOS_LEN_BYTE 1 -#define IDS_NV_TO_CMOS_LEN_WORD 2 -#define IDS_NV_TO_CMOS_LEN_END 0xFF -#define IDS_NV_TO_CMOS_ID_END 0xFFFF - -/// Data struct of set/get NV to/from CMOS -typedef struct _IDS_NV_TO_CMOS { - UINT8 Length; ///< Length of NV - UINT16 IDS_NV_ID; ///< IDS id -} IDS_NV_TO_CMOS; - -IDS_STATUS -AmdIdsCtrlDispatcher ( - IN AGESA_IDS_OPTION IdsOption, - IN OUT VOID *DataPtr, - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -AGESA_STATUS -IdsOptionCallout ( - IN UINTN CallOutId, - IN OUT VOID *DataPtr, - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -VOID -AmdIdsDebugPrintInit ( - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -VOID -AmdIdsDebugPrintExit ( - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -VOID -AmdIdsDebugPrintS3Exit ( - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -VOID -AmdIdsDebugPrintS3ApExit ( - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -VOID -AmdIdsDebugPrint ( - IN UINT64 Flag, - IN CHAR8 *Format, - IN ... - ); - -VOID -AmdIdsDebugPrintHt ( - IN CHAR8 *Format, - IN ... - ); - -VOID -AmdIdsDebugPrintCpu ( - IN CHAR8 *Format, - IN ... - ); - -VOID -AmdIdsDebugPrintMem ( - IN CHAR8 *Format, - IN ... - ); - -VOID -AmdIdsDebugPrintGnb ( - IN CHAR8 *Format, - IN ... - ); - -VOID -AmdIdsDebugPrintFlush ( - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -VOID -IdsMemTimeOut ( - IN OUT VOID *DataPtr - ); - -VOID -IdsAgesaTestPoint ( - IN AGESA_TP TestPoint, - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -/** - * IDS Backend Function for ASSERT - * - * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that - * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, - * to help distinguish the stop code from a post code loop. - * Additional features may be available if using simulation. - * - * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. - * - * @retval TRUE No error -**/ -BOOLEAN -IdsAssert ( - IN UINT32 FileCode - ); - -/** - * The engine code for ASSERT MACRO - * - * Halt execution with stop code display. Stop Code is displayed on port 80, with rotation so that - * it is visible on 8, 16, or 32 bit display. The stop code is alternated with 0xDEAD on the display, - * to help distinguish the stop code from a post code loop. - * Additional features may be available if using simulation. - * - * @param[in] FileCode File code(define in FILECODE.h) mix with assert Line num. - * - */ -BOOLEAN -IdsErrorStop ( - IN UINT32 FileCode - ); - -VOID -IdsDelay ( - IN VOID -); - -BOOLEAN -AmdHeapIntactCheck ( - IN AMD_CONFIG_PARAMS *StdHeader - ); - -VOID -IdsCarCorruptionCheck ( - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -IDS_STATUS -IdsExceptionTrap ( - IN IDS_IDT_FUNC_ID IdsIdtFuncId, - IN VOID *DataPtr, - IN OUT AMD_CONFIG_PARAMS *StdHeader - ); - -#if IDSOPT_IDS_ENABLED == FALSE - #undef IEM_SKIP_CODE - #undef IEM_INSERT_CODE -#endif -#ifndef IEM_SKIP_CODE - #define IEM_SKIP_CODE(L) -#endif -#ifndef IEM_INSERT_CODE - #define IEM_INSERT_CODE(L,Fn,Parm) -#endif - -//Note a is from 0 to 63 -#define DEBUG_PRINT_SHIFT(a) ((UINT64)1 << a) -//If you change the Bitmap definition below, please change the Hash in ParseFilter of hdtout2008.pl accordingly -//Memory Masks -#define MEM_SETREG DEBUG_PRINT_SHIFT (0) -#define MEM_GETREG DEBUG_PRINT_SHIFT (1) -#define MEM_FLOW DEBUG_PRINT_SHIFT (2) -#define MEM_STATUS DEBUG_PRINT_SHIFT (3) -#define MEMORY_TRACE_RSV1 DEBUG_PRINT_SHIFT (4) -#define MEMORY_TRACE_RSV2 DEBUG_PRINT_SHIFT (5) -#define MEMORY_TRACE_RSV3 DEBUG_PRINT_SHIFT (6) -#define MEMORY_TRACE_RSV4 DEBUG_PRINT_SHIFT (7) -#define MEMORY_TRACE_RSV5 DEBUG_PRINT_SHIFT (8) -#define MEMORY_TRACE_RSV6 DEBUG_PRINT_SHIFT (9) - - - -//CPU Masks -#define CPU_TRACE DEBUG_PRINT_SHIFT (10) -#define CPU_TRACE_RSV1 DEBUG_PRINT_SHIFT (11) -#define CPU_TRACE_RSV2 DEBUG_PRINT_SHIFT (12) -#define CPU_TRACE_RSV3 DEBUG_PRINT_SHIFT (13) -#define CPU_TRACE_RSV4 DEBUG_PRINT_SHIFT (14) -#define CPU_TRACE_RSV5 DEBUG_PRINT_SHIFT (15) -#define CPU_TRACE_RSV6 DEBUG_PRINT_SHIFT (16) -#define CPU_TRACE_RSV7 DEBUG_PRINT_SHIFT (17) -#define CPU_TRACE_RSV8 DEBUG_PRINT_SHIFT (18) -#define CPU_TRACE_RSV9 DEBUG_PRINT_SHIFT (19) - -//GNB Masks -#define GNB_TRACE DEBUG_PRINT_SHIFT (20) -#define PCIE_MISC DEBUG_PRINT_SHIFT (21) -#define PCIE_PORTREG_TRACE DEBUG_PRINT_SHIFT (22) -#define PCIE_HOSTREG_TRACE DEBUG_PRINT_SHIFT (23) -#define GNB_TRACE_RSV2 DEBUG_PRINT_SHIFT (24) -#define NB_MISC DEBUG_PRINT_SHIFT (25) -#define GNB_TRACE_RSV3 DEBUG_PRINT_SHIFT (26) -#define GFX_MISC DEBUG_PRINT_SHIFT (27) -#define NB_SMUREG_TRACE DEBUG_PRINT_SHIFT (28) -#define GNB_TRACE_RSV1 DEBUG_PRINT_SHIFT (29) - -//HT Masks -#define HT_TRACE DEBUG_PRINT_SHIFT (30) -#define HT_TRACE_RSV1 DEBUG_PRINT_SHIFT (31) -#define HT_TRACE_RSV2 DEBUG_PRINT_SHIFT (32) -#define HT_TRACE_RSV3 DEBUG_PRINT_SHIFT (33) -#define HT_TRACE_RSV4 DEBUG_PRINT_SHIFT (34) -#define HT_TRACE_RSV5 DEBUG_PRINT_SHIFT (35) -#define HT_TRACE_RSV6 DEBUG_PRINT_SHIFT (36) -#define HT_TRACE_RSV7 DEBUG_PRINT_SHIFT (37) -#define HT_TRACE_RSV8 DEBUG_PRINT_SHIFT (38) -#define HT_TRACE_RSV9 DEBUG_PRINT_SHIFT (39) - -//FCH Masks -#define FCH_TRACE DEBUG_PRINT_SHIFT (40) -#define FCH_TRACE_RSV1 DEBUG_PRINT_SHIFT (41) -#define FCH_TRACE_RSV2 DEBUG_PRINT_SHIFT (42) -#define FCH_TRACE_RSV3 DEBUG_PRINT_SHIFT (43) -#define FCH_TRACE_RSV4 DEBUG_PRINT_SHIFT (44) -#define FCH_TRACE_RSV5 DEBUG_PRINT_SHIFT (45) -#define FCH_TRACE_RSV6 DEBUG_PRINT_SHIFT (46) -#define FCH_TRACE_RSV7 DEBUG_PRINT_SHIFT (47) -#define FCH_TRACE_RSV8 DEBUG_PRINT_SHIFT (48) -#define FCH_TRACE_RSV9 DEBUG_PRINT_SHIFT (49) - -//Other Masks -#define MAIN_FLOW DEBUG_PRINT_SHIFT (50) -#define EVENT_LOG DEBUG_PRINT_SHIFT (51) -#define PERFORMANCE_ANALYSE DEBUG_PRINT_SHIFT (52) - -//Ids Masks -#define IDS_TRACE DEBUG_PRINT_SHIFT (53) -#define IDS_REG DEBUG_PRINT_SHIFT (54) -#define IDS_TRACE_RSV2 DEBUG_PRINT_SHIFT (55) -#define IDS_TRACE_RSV3 DEBUG_PRINT_SHIFT (56) - -//S3 -#define S3_TRACE DEBUG_PRINT_SHIFT (57) - -//Library function to read/write PCI/MSR registers -#define LIB_PCI_RD DEBUG_PRINT_SHIFT (58) -#define LIB_PCI_WR DEBUG_PRINT_SHIFT (59) - -//Reserved -#define TRACE_RSV3 DEBUG_PRINT_SHIFT (60) -#define TRACE_RSV4 DEBUG_PRINT_SHIFT (61) -#define TRACE_RSV5 DEBUG_PRINT_SHIFT (62) -#define TRACE_RSV6 DEBUG_PRINT_SHIFT (63) - -#endif // _IDS_H_ |