diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN')
4 files changed, 0 insertions, 1435 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrndctln.c b/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrndctln.c deleted file mode 100644 index 6a6fdb8912..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrndctln.c +++ /dev/null @@ -1,374 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mrndctln.c - * - * Northbridge DCT support for Llano Recovery - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Proc/Recovery/Mem) - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* *************************************************************************** -* -*/ - - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "OptionMemory.h" -#include "PlatformMemoryConfiguration.h" -#include "Ids.h" -#include "amdlib.h" -#include "mm.h" -#include "mn.h" -#include "mt.h" -#include "mru.h" -#include "mrnln.h" -#include "cpuFamilyTranslation.h" -#include "cpuCommonF12Utilities.h" -#include "Filecode.h" -CODE_GROUP (G2_PEI) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_RECOVERY_MEM_NB_LN_MRNDCTLN_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ -#define RECDEF_DRAM_CONTROL_REG 0x14042A08 -#define RECDEF_DRAM_MRSREG 0x000400A5 -#define RECDEF_DRAM_TIMING_LO 0x00000002 -#define RECDEF_DRAM_TIMING_HI 0x02D218FF -#define RECDEF_CSMASK_REG 0x00003FE0 -#define RECDEF_DRAM_CONFIG_HI_REG 0x1E000000 -#define RECDEF_DRAM_BASE_REG 0x00000003 -#define RECDEF_DRAM_TIMING_0 0x0A000101 -#define RECDEF_DRAM_TIMING_1 0 - -#define MAX_RD_DQS_DLY 0x1F -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function gets platform specific config/timing values from the interface layer and - * programs them into DCT. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return TRUE - An Error value lower than AGESA_ERROR may have occurred - * @return FALSE - An Error value greater than or equal to AGESA_ERROR may have occurred - */ - -BOOLEAN -MemRecNPlatformSpecLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - UINT32 AddrTmgValue; - UINT32 DrvStrValue; - CH_DEF_STRUCT *ChannelPtr; - - ChannelPtr = NBPtr->ChannelPtr; - - if (ChannelPtr->SODimmPresent != 0) { - // SODIMM - if (ChannelPtr->Dimms == 2) { - AddrTmgValue = 0x00000039; - DrvStrValue = 0x20222323; - } else { - AddrTmgValue = 0; - DrvStrValue = 0x00002222; - } - } else { - // UDIMM - if (ChannelPtr->Dimms == 2) { - AddrTmgValue = 0x00390039; - DrvStrValue = 0x20222322; - } else { - AddrTmgValue = 0; - DrvStrValue = 0x00112222; - if (ChannelPtr->DimmDrPresent != 0) { - AddrTmgValue = 0x003B0000; - } - } - } - - MemRecNSetBitFieldNb (NBPtr, BFODCControl, DrvStrValue); - MemRecNSetBitFieldNb (NBPtr, BFAddrTmgControl, AddrTmgValue); - - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the maximum round-trip latency in the system from the processor to the DRAM - * devices and back. - - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] MaxRcvEnDly - Maximum receiver enable delay value - * - */ - -VOID -MemRecNSetMaxLatencyLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT16 MaxRcvEnDly - ) -{ - UINT32 N; - UINT32 T; - UINT32 P; - UINT32 Px2; - UINT32 MemClkPeriod; - - T = MemRecNTotalSyncComponentsClientNb (NBPtr); - - // P = P + CEIL(MAX (total delay in DqsRcvEn + RdDqsTime)) - P = (MaxRcvEnDly + MAX_RD_DQS_DLY + 31) / 32; - - MemClkPeriod = 1000000 / DDR800_FREQUENCY; - - // P = P + 8.5 - // T = T + 2586 ps - Px2 = (P * 2) + 17; - T += 2586; - - // N = (P/(MemClkFreq * 2) + T) * NclkFreq - N = ((((Px2 * MemClkPeriod + 3) / 4) + T) * NBPtr->NBClkFreq + 999999) / 1000000; - - MemRecNSetBitFieldNb (NBPtr, BFMaxLatency, N); -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * Set Dram ODT for mission mode and write leveling mode. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] OdtMode - Mission mode or write leveling mode - * @param[in] ChipSelect - Chip select number - * @param[in] TargetCS - Chip select number that is being trained - * - */ - -VOID -MemRecNSetDramOdtLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN ODT_MODE OdtMode, - IN UINT8 ChipSelect, - IN UINT8 TargetCS - ) -{ - UINT8 Dimms; - UINT8 DramTerm; - UINT8 DramTermDyn; - UINT8 WrLvOdt; - UINT8 MaxDimmsPerChannel; - - Dimms = NBPtr->ChannelPtr->Dimms; - - // Dram nominal termination - if (Dimms == 1) { - DramTerm = 2; // 120 Ohms - DramTermDyn = 0; // Disabled - } else { - DramTerm = 3; // 40 Ohms - DramTermDyn = 2; // 120 Ohms - } - - if (OdtMode == WRITE_LEVELING_MODE) { - if (ChipSelect == TargetCS) { - DramTerm = DramTermDyn; - - MaxDimmsPerChannel = RecGetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, 0, NBPtr->ChannelPtr->ChannelID); - - if (MaxDimmsPerChannel == 2) { - if (Dimms == 2) { - WrLvOdt = 5; - } else { - // Dimms = 1 - if (TargetCS == 0) { - WrLvOdt = 0xF; - } else { - // TargetCS = 2 - WrLvOdt = 4; - } - } - } else { - WrLvOdt = 1; - } - MemRecNSetBitFieldNb (NBPtr, BFWrLvOdt, WrLvOdt); - } - } - MemRecNSetBitFieldNb (NBPtr, BFDramTerm, DramTerm); - MemRecNSetBitFieldNb (NBPtr, BFDramTermDyn, DramTermDyn); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function programs the memory controller with configuration parameters - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return TRUE - An Error value lower than AGESA_ERROR may have occurred - * @return FALSE - An Error value greater than or equal to AGESA_ERROR may have occurred - */ - -BOOLEAN -MemRecNAutoConfigLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - UINT8 Dimm; - UINT8 Dct; - UINT8 ChipSel; - UINT32 CSBase; - UINT32 NBClkFreq; - DCT_STRUCT *DCTPtr; - CH_DEF_STRUCT *ChannelPtr; - - Dct = NBPtr->Dct; - DCTPtr = NBPtr->DCTPtr; - ChannelPtr = NBPtr->ChannelPtr; - - // Force NB P-state to NBP0 - F12NbPstateInit (DDR800_FREQUENCY, - 6, - 0, - &NBClkFreq, - &(NBPtr->MemPtr->StdHeader)); - NBPtr->NBClkFreq = NBClkFreq; - MemRecNSetBitFieldNb (NBPtr, BFNbPsCtrlDis, 1); - - //Prepare variables for future usage. - for (Dimm = 0; Dimm < 2; Dimm++) { - if ((ChannelPtr->ChDimmValid & (UINT8) 1 << Dimm) != 0) { - DCTPtr->Timings.CsPresent |= (UINT16) 1 << (Dimm * 2); - if (((ChannelPtr->DimmDrPresent & (UINT8) 1 << Dimm) == 0) && ((ChannelPtr->DimmQrPresent & (UINT8) 1 << Dimm) == 0)) { - continue; - } else { - DCTPtr->Timings.CsPresent |= (UINT16) 1 << (Dimm * 2 + 1); - } - } - } - - //Temporarily set all CS Base/Limit registers (corresponding to Dimms exist on a channel) with 256MB size for WL training. - CSBase = 0; - for (ChipSel = 0; ChipSel < 4; ChipSel++) { - if (DCTPtr->Timings.CsPresent & (UINT8) 1 << ChipSel) { - - CSBase &= (UINT32) ~0x08; //Clear OnDimmMirror bit. - if (((ChipSel & 1) != 0) && ((ChannelPtr->DimmMirrorPresent & (UINT8) 1 << (ChipSel >> 1)) != 0)) { - CSBase |= (UINT32) 0x08; //Set OnDimmMirror bit. - } - MemRecNSetBitFieldNb (NBPtr, (BFCSBaseAddr0Reg + ChipSel), (CSBase | 0x01)); - CSBase += 0x100000; - if ((ChipSel & 1) == 0) { - MemRecNSetBitFieldNb (NBPtr, (BFCSMask0Reg + (ChipSel >> 1)), RECDEF_CSMASK_REG); - } - } - } - MemRecNSetBitFieldNb (NBPtr, BFDramBaseReg0, RECDEF_DRAM_BASE_REG); - MemRecNSetBitFieldNb (NBPtr, BFDramLimitReg0, 0x70000); - - // Disable the other DCT - NBPtr->MemRecNSwitchDctNb (NBPtr, Dct ^ 0x01); - MemRecNSetBitFieldNb (NBPtr, BFDisDramInterface, 1); - NBPtr->MemRecNSwitchDctNb (NBPtr, Dct); - if (Dct != 0) { - // If DCT 1, set DctSelBase registers - MemRecNSetBitFieldNb (NBPtr, BFDctSelBaseAddrReg, 0x00000003); - MemRecNSetBitFieldNb (NBPtr, BFDctSelBaseOffsetReg, 0x00000000); - } - - MemRecNSetBitFieldNb (NBPtr, BFDramBankAddrReg, 0x00000011); - - // Set timing registers - MemRecNSetBitFieldNb (NBPtr, BFDramTiming0, RECDEF_DRAM_TIMING_0); - MemRecNSetBitFieldNb (NBPtr, BFDramTiming1, RECDEF_DRAM_TIMING_1); - MemRecNSetBitFieldNb (NBPtr, BFDramTimingLoReg, RECDEF_DRAM_TIMING_LO); - MemRecNSetBitFieldNb (NBPtr, BFDramTimingHiReg, RECDEF_DRAM_TIMING_HI); - MemRecNSetBitFieldNb (NBPtr, BFDramMRSReg, RECDEF_DRAM_MRSREG); - MemRecNSetBitFieldNb (NBPtr, BFDramControlReg, RECDEF_DRAM_CONTROL_REG); - - // Set DRAM Config High Register - MemRecNSetBitFieldNb (NBPtr, BFDramConfigHiReg, RECDEF_DRAM_CONFIG_HI_REG); - - // DctWrLimit = 0x1F - MemRecNSetBitFieldNb (NBPtr, BFDctWrLimit, 0x1F); - // EnCpuSerRdBehindNpIoWr = 1 - MemRecNSetBitFieldNb (NBPtr, BFEnCpuSerRdBehindNpIoWr, 1); - - - return TRUE; -} - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c b/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c deleted file mode 100644 index 384f96a23f..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c +++ /dev/null @@ -1,726 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mrnln.c - * - * Common Northbridge functions for Llano Recovery - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Proc/Recovery/Mem) - * @e \$Revision: 48317 $ @e \$Date: 2011-03-08 01:38:14 +0800 (Tue, 08 Mar 2011) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "mrport.h" -#include "cpuFamRegisters.h" -#include "cpuRegisters.h" -#include "cpuFamilyTranslation.h" -#include "mm.h" -#include "mn.h" -#include "mrnln.h" -#include "heapManager.h" -#include "AdvancedApi.h" -#include "Filecode.h" -CODE_GROUP (G2_PEI) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_RECOVERY_MEM_NB_LN_MRNLN_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -#define SPLIT_CHANNEL 0x20000000 -#define CHANNEL_SELECT 0x10000000 -#define MAX_DELAYS 9 /* 8 data bytes + 1 ECC byte */ -#define MAX_DIMMS 4 /* 4 DIMMs per channel */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ -CONST MEM_FREQ_CHANGE_PARAM RecFreqChangeParamLN = {0x0190, NULL, 8, 14, 3}; - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -VOID -STATIC -MemRecNSwitchChannelLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Channel - ); - -VOID -STATIC -MemRecNInitNBRegTableLN ( - IN OUT TSEFO *NBRegTable - ); - -UINT32 -STATIC -MemRecNCmnGetSetFieldLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN BIT_FIELD_NAME FieldName, - IN UINT32 Field - ); - -UINT32 -STATIC -MemRecNcmnGetSetTrainDlyLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ); - -BOOLEAN -STATIC -MemRecNIsIdSupportedLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN CPU_LOGICAL_ID *LogicalIdPtr - ); - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -/* -----------------------------------------------------------------------------*/ -/** - * - * This function initializes the northbridge block - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT - * @param[in] NodeID - Node ID for this NB block - * - * @return TRUE - This node is a Llano and this NB block has been initialized - * @return FALSE - This node is not a Llano - */ - -BOOLEAN -MemRecConstructNBBlockLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT MEM_DATA_STRUCT *MemPtr, - IN UINT8 NodeID - ) -{ - UINT8 i; - UINT8 Dct; - UINT8 Channel; - DIE_STRUCT *MCTPtr; - ALLOCATE_HEAP_PARAMS AllocHeapParams; - - // - // Determine if this is the expected NB Type - // - GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); - if (!MemRecNIsIdSupportedLN (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) { - return FALSE; - } - - // - // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs - // - MCTPtr = &MemPtr->DiesPerSystem[NodeID]; - AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_LN * ( - sizeof (DCT_STRUCT) + ( - MAX_CHANNELS_PER_DCT_LN * ( - sizeof (CH_DEF_STRUCT) + ( - MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES - ) - ) - ) - ) + (sizeof (TSEFO) * BFEndOfList); - AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0); - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) { - return FALSE; - } - - MemPtr->DieCount = 1; - MCTPtr->DctCount = MAX_DCTS_PER_NODE_LN; - MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr; - AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_LN * sizeof (DCT_STRUCT); - for (Dct = 0; Dct < MAX_DCTS_PER_NODE_LN; Dct++) { - MCTPtr->DctData[Dct].Dct = Dct; - MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_LN; - MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr; - MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct; - AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_LN * sizeof (CH_DEF_STRUCT); - for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_LN; Channel++) { - MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr; - AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2; - MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr; - MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct; - AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS); - } - } - - // - // Initialize NB block's variables - // - NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr; - NBPtr->MemPtr = MemPtr; - NBPtr->RefPtr = MemPtr->ParameterListPtr; - NBPtr->MCTPtr = &MemPtr->DiesPerSystem[NodeID]; - NBPtr->SPDPtr = MemPtr->SpdDataStructure; - NBPtr->AllNodeSPDPtr = MemPtr->SpdDataStructure; - - NBPtr->DctCachePtr = NBPtr->DctCache; - - MemRecNInitNBRegTableLN (NBPtr->NBRegTable); - NBPtr->Dct = 0; - NBPtr->Channel = 0; - NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); - NBPtr->FreqChangeParam = (MEM_FREQ_CHANGE_PARAM *) &RecFreqChangeParamLN; - LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader); - LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader); - for (i = 0; i < NumberOfHooks; i++) { - NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue; - } - - NBPtr->InitRecovery = MemRecNMemInitLN; - - NBPtr->RecModeDefRegArray = NULL; - - NBPtr->SwitchNodeRec = (VOID (*) (MEM_NB_BLOCK *, UINT8)) MemRecDefRet; - NBPtr->SwitchDCT = MemRecNSwitchDctLN; - NBPtr->SwitchChannel = MemRecNSwitchChannelLN; - NBPtr->SetMaxLatency = MemRecNSetMaxLatencyLN; - NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb; - NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb; - NBPtr->sendZQCmd = MemRecNSendZQCmdNb; - NBPtr->SetDramOdtRec = MemRecNSetDramOdtLN; - - NBPtr->GetBitField = MemRecNGetBitFieldNb; - NBPtr->SetBitField = MemRecNSetBitFieldNb; - NBPtr->GetTrainDly = MemRecNGetTrainDlyNb; - NBPtr->SetTrainDly = MemRecNSetTrainDlyNb; - - NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldLN; - NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyLN; - NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctLN; - NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctLN; - NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctLN; - NBPtr->IsSupported[DramModeAfterDimmPres] = TRUE; - NBPtr->TrainingFlow = MemNRecTrainingFlowClientNb; - NBPtr->ReadPattern = MemRecNContReadPatternClientNb; - NBPtr->FamilySpecificHook[ReEnablePhyComp] = MemRecNReEnablePhyCompNb; - MemRecNSwitchDctLN (NBPtr, 0); - - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the current DCT to work on. - * Should be called before accessing a certain DCT - * All data structures will be updated to point to the current DCT - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] Dct - ID of the target DCT - * - */ - -VOID -MemRecNSwitchDctLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Dct - ) -{ - NBPtr->Dct = Dct & 1; - NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[Dct * MAX_DIMMS_PER_CHANNEL]); - NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]); - - MemRecNSwitchChannelLN (NBPtr, NBPtr->Channel); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the current channel to work on. - * Should be called before accessing a certain channel - * All data structures will be updated to point to the current channel - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] Channel - ID of the target channel - * - */ - -VOID -STATIC -MemRecNSwitchChannelLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Channel - ) -{ - NBPtr->Channel = Channel & 1; - NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]); -} -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function gets or set DQS timing during training. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - type of delay to be set - * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed - * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding - * @param[in] Field - Value to be programmed - * @param[in] IsSet - Indicates if the function will set or get - * - * @return value read, if the function is used as a "get" - */ - -UINT32 -STATIC -MemRecNcmnGetSetTrainDlyLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ) -{ - UINT16 Index; - UINT16 Offset; - UINT32 Value; - UINT32 Address; - UINT8 Dimm; - UINT8 Byte; - - Dimm = DRBN_DIMM (DrbnVar); - Byte = DRBN_BYTE (DrbnVar); - - ASSERT (Dimm < 1); - ASSERT (Byte <= 8); - - switch (TrnDly) { - case AccessRcvEnDly: - Index = 0x10; - break; - case AccessWrDqsDly: - Index = 0x30; - break; - case AccessWrDatDly: - Index = 0x01; - break; - case AccessRdDqsDly: - Index = 0x05; - break; - case AccessPhRecDly: - Index = 0x50; - break; - default: - Index = 0; - IDS_ERROR_TRAP; - } - - switch (TrnDly) { - case AccessRcvEnDly: - case AccessWrDqsDly: - if ((Byte & 0x04) != 0) { - // if byte 4,5,6,7 - Index += 0x10; - } - if ((Byte & 0x02) != 0) { - // if byte 2,3,6,7 - Index++; - } - Offset = 16 * (Byte % 2); - break; - - case AccessRdDqsDly: - Field &= ~ 0x0001; - case AccessWrDatDly: - Index += (Dimm * 0x100); - // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need - // to run AccessPhRecDly sequence. - case AccessPhRecDly: - Index += (Byte / 4); - Offset = 8 * (Byte % 4); - break; - default: - Offset = 0; - IDS_ERROR_TRAP; - } - - Address = Index; - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); - - if (IsSet != 0) { - if (TrnDly == AccessPhRecDly) { - Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03]; - } - - Value = ((UINT32)Field << Offset) | (Value & (~((UINT32)0xFF << Offset))); - MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - - if (TrnDly == AccessPhRecDly) { - NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value; - } - } else { - Value = (Value >> Offset) & 0xFF; - } - - return Value; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function gets or sets a value to a bit field in a PCI register. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] FieldName - Name of Field to be set * @param[in] Field - Value to be programmed - * @param[in] IsSet - Indicates if the function will set or get - * - * @return value read, if the function is used as a "get" - */ - -UINT32 -STATIC -MemRecNCmnGetSetFieldLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN BIT_FIELD_NAME FieldName, - IN UINT32 Field - ) -{ - SBDFO Address; - PCI_ADDR PciAddr; - UINT8 Type; - UINT32 Value; - UINT32 Highbit; - UINT32 Lowbit; - UINT32 Mask; - - Value = 0; - if (FieldName < BFEndOfList) { - Address = NBPtr->NBRegTable[FieldName]; - if (Address != 0) { - Lowbit = TSEFO_END (Address); - Highbit = TSEFO_START (Address); - Type = TSEFO_TYPE (Address); - - // If Fn2 and DCT1 selected, set Address to be 1xx - if (((Address & 0xF000) == 0x2000) && (NBPtr->Dct != 0)) { - Address |= 0x0100; - } - if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) { - // Special DCT Phy access - Address &= 0x0FFFFFFF; - Lowbit = 0; - Highbit = 16; - } else { - // Normal DCT Phy access - Address = TSEFO_OFFSET (Address); - } - - - if (Type == NB_ACCESS) { - Address |= (((UINT32) (24 + 0)) << 15); - PciAddr.AddressValue = Address; - LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader); - } else if (Type == DCT_PHY_ACCESS) { - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); - } else if (Type == DCT_EXTRA) { - MemRecNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address); - Value = MemRecNGetBitFieldNb (NBPtr, BFDctExtraDataReg); - } else { - IDS_ERROR_TRAP; - } - - if (IsSet != 0) { - // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case - if ((Highbit - Lowbit) != 31) { - Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); - } else { - Mask = (UINT32)0xFFFFFFFF; - } - Value &= ~(Mask << Lowbit); - Value |= (Field & Mask) << Lowbit; - - if (Type == NB_ACCESS) { - PciAddr.AddressValue = Address; - LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader); - } else if (Type == DCT_PHY_ACCESS) { - MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - } else if (Type == DCT_EXTRA) { - MemRecNSetBitFieldNb (NBPtr, BFDctExtraDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemRecNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address); - } else { - IDS_ERROR_TRAP; - } - } else { - Value = Value >> Lowbit; // Shift - // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case - if ((Highbit - Lowbit) != 31) { - Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); - } - } - } - } else { - IDS_ERROR_TRAP; // Invalid bit field index - } - return Value; -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function initializes bit field translation table - * - * @param[in,out] *NBRegTable - Pointer to the NB Table - * - */ - -VOID -STATIC -MemRecNInitNBRegTableLN ( - IN OUT TSEFO *NBRegTable - ) -{ - UINT16 i; - for (i = 0; i <= BFEndOfList; i++) { - NBRegTable[i] = 0; - } - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31, 0, BFDevVendorIDReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60), 2, 0, BFNodeID); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31, 0, BFCSBaseAddr0Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31, 0, BFCSBaseAddr1Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31, 0, BFCSBaseAddr2Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31, 0, BFCSBaseAddr3Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31, 0, BFCSMask0Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31, 0, BFCSMask1Reg); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 0, BFDramControlReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 0, BFDramInitRegReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31, 0, BFDramBankAddrReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31, 0, BFDramMRSReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 9, 7, BFDramTerm); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 0, BFDramTimingLoReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 0, BFDramTimingHiReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31, 0, BFDramConfigLoReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 0, BFDramConfigHiReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 0, BFDctAddlOffsetReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31, 0, BFDctAddlDataReg); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15, 0, BFMrsAddress); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 7, 7, BFLevel); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 0, 0, BFInitDram); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 1, 1, BFExitSelfRef); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 27, 27, BFDisDllShutdownSR); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 4, 0, BFMemClkFreq); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 7, 7, BFMemClkFreqVal); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 8, 8, BFDdr3Mode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 9, 9, BFLegacyBiosMode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 22, 21, BFDbeGskMemClkAlignMode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF0), 31, 0, BFDctExtraOffsetReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF4), 31, 0, BFDctExtraDataReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 8, 8, BFDramEnabled); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 6, 2, BFDctWrLimit); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 17, 2, BFTrainLength); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 20, 20, BFDramTrainPdbDis); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 22, 22, BFRdDramTrainMode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 23, 23, BFRdTrainGo); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C8), 31, 0, BFWrTrainAdrPtrLo); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1D0), 9, 0, BFWrTrainBufAddr); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4), 5, 0, BFMainPllOpFreqId); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xDC), 26, 20, BFNbPs0NclkDiv); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x188), 22, 22, BFEnCpuSerRdBehindNpIoWr); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (6, 0x90), 30, 30, BFNbPsCtrlDis); - - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 2, 0, BFCkeDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 6, 4, BFCsOdtDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 10, 8, BFAddrCmdDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 14, 12, BFClkDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 18, 16, BFDataDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 22, 20, BFDqsDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31, 0, BFODCControl); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31, 0, BFAddrTmgControl); - - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 0, 0, BFWrtLvTrEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 1, 1, BFWrtLvTrMode); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 3, 3, BFPhyFenceTrEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 4, 4, BFTrDimmSel); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 7, 6, BFFenceTrSel); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11, 8, BFWrLvOdt); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 21, 15, BFPllMult); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 27, 24, BFPllDiv); - - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0B, 31, 0, BFDramPhyStatusReg); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0C, 20, 16, BFPhyFence); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE006, 15, 0, BFPllLockTime); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE013, 15, 0, BFPllRegWaitTime); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F1F, 4, 3, BFDataRxVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2F1F, 4, 3, BFClkRxVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4009, 15, 14, BFCmpVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8F1F, 4, 3, BFCmdRxVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC01F, 4, 3, BFAddrRxVioLvl); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F31, 14, 0, BFDataFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2F31, 4, 0, BFClkFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8F31, 4, 0, BFCmdFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC031, 4, 0, BFAddrFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0F, 14, 12, BFAlwaysEnDllClks); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE003, 14, 13, BFDisablePredriverCal); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F02, 15, 0, BFDataByteTxPreDriverCal); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F06, 15, 0, BFDataByteTxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0A, 15, 0, BFDataByteTxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8006, 15, 0, BFCmdAddr0TxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F800A, 15, 0, BFCmdAddr0TxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8106, 15, 0, BFCmdAddr1TxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F810A, 15, 0, BFCmdAddr1TxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC006, 15, 0, BFAddrTxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00A, 15, 0, BFAddrTxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00E, 15, 0, BFAddrTxPreDriverCal2Pad3); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC012, 15, 0, BFAddrTxPreDriverCal2Pad4); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8002, 15, 0, BFCmdAddr0TxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8102, 15, 0, BFCmdAddr1TxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC002, 15, 0, BFAddrTxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2002, 15, 0, BFClock0TxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2102, 15, 0, BFClock1TxPreDriverCalPad0); - - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x30, 12, 0, BFDbeGskFifoNumerator); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x31, 12, 0, BFDbeGskFifoDenominator); - - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 4, 0, BFDataTxFifoSchedDlySlot0); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 7, 7, BFDataTxFifoSchedDlyNegSlot0); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 12, 8, BFDataTxFifoSchedDlySlot1); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 15, 15, BFDataTxFifoSchedDlyNegSlot1); - - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x40, 31, 0, BFDramTiming0); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x41, 31, 0, BFDramTiming1); - -} - -/*-----------------------------------------------------------------------------*/ -/** - * - * This function matches the CPU_LOGICAL_ID with certain criteria to - * determine if it is supported by this NBBlock. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID - * - * @return TRUE - This node is a Llano. - * @return FALSE - This node is not a Llano. - */ -BOOLEAN -STATIC -MemRecNIsIdSupportedLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN CPU_LOGICAL_ID *LogicalIdPtr - ) -{ - if ((LogicalIdPtr->Family & (AMD_FAMILY_12_LN)) != 0) { - return TRUE; - } else { - return FALSE; - } -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.h b/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.h deleted file mode 100644 index cd0a82ba6e..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.h +++ /dev/null @@ -1,131 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mnln.h - * - * Northbridge Llano Recovery - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Proc/Recovery/Mem) - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - **/ -/***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * *************************************************************************** - * - */ - -#ifndef _MRNLN_H_ -#define _MRNLN_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ -#define MAX_DCTS_PER_NODE_LN 2 -#define MAX_CHANNELS_PER_DCT_LN 1 - -#define _4GB_RJ8 ((UINT32)4 << (30 - 8)) -#define MTRR_VALID 11 - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS, STRUCTURES, ENUMS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ - -BOOLEAN -MemRecConstructNBBlockLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT MEM_DATA_STRUCT *MemPtr, - IN UINT8 NodeID - ); - -AGESA_STATUS -MemRecNMemInitLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ); - -VOID -MemRecNFinalizeMctLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ); - -VOID -MemRecNInitializeMctLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ); - -VOID -MemRecNSwitchDctLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Dct - ); - -VOID -MemRecNSetMaxLatencyLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT16 MaxRcvEnDly - ); - -BOOLEAN -MemRecNPlatformSpecLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ); - -VOID -MemRecNSetDramOdtLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN ODT_MODE OdtMode, - IN UINT8 ChipSelect, - IN UINT8 TargetCS - ); - -BOOLEAN -MemRecNAutoConfigLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ); - -#endif /* _MRNLN_H_ */ - - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnmctln.c b/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnmctln.c deleted file mode 100644 index 5c31d44ff0..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnmctln.c +++ /dev/null @@ -1,204 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mrnmctln.c - * - * Northbridge LN MCT supporting functions Recovery - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Proc/Recovery/Mem) - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "mrport.h" -#include "mm.h" -#include "mn.h" -#include "mt.h" -#include "mrnln.h" -#include "Filecode.h" -CODE_GROUP (G2_PEI) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_RECOVERY_MEM_NB_LN_MRNMCTLN_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function is the Recovery memory configuration function for LN DDR3 - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return AGESA_STATUS - * - AGESA_ALERT - * - AGESA_FATAL - * - AGESA_SUCCESS - * - AGESA_WARNING - */ - -AGESA_STATUS -MemRecNMemInitLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - AGESA_STATUS Status; - MEM_TECH_BLOCK *TechPtr; - - TechPtr = NBPtr->TechPtr; - - Status = AGESA_FATAL; - if (TechPtr->DimmPresence (TechPtr)) { - - if (MemRecNAutoConfigLN (NBPtr)) { - - AGESA_TESTPOINT (TpProcMemPlatformSpecificConfig, &(NBPtr->MemPtr->StdHeader)); - if (MemRecNPlatformSpecLN (NBPtr)) { - AgesaHookBeforeDramInitRecovery (0, NBPtr->MemPtr); - AGESA_TESTPOINT (TpProcMemStartDcts, &(NBPtr->MemPtr->StdHeader)); - MemRecNStartupDCTClientNb (NBPtr); - - AGESA_TESTPOINT (TpProcMemMtrrConfiguration, &(NBPtr->MemPtr->StdHeader)); - MemRecNCPUMemRecTypingNb (NBPtr); - - AGESA_TESTPOINT (TpProcMemDramTraining, &(NBPtr->MemPtr->StdHeader)); - NBPtr->TrainingFlow (NBPtr); - - Status = AGESA_SUCCESS; - } - } - } - - return Status; -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the final values for specific registers - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemRecNFinalizeMctLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - // - // Recommended registers setting after DRAM device initialization and training - // - // PrefCpuDis = 0 - MemRecNSetBitFieldNb (NBPtr, BFPrefCpuDis, 0); - // DctWrLimit = 0x1C - MemRecNSetBitFieldNb (NBPtr, BFDctWrLimit, 0x1C); - // DramTrainPdbDis = 1 - MemRecNSetBitFieldNb (NBPtr, BFDramTrainPdbDis, 1); - // EnCpuSerRdBehindNpIoWr = 0 - MemRecNSetBitFieldNb (NBPtr, BFEnCpuSerRdBehindNpIoWr, 0); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets initial values in BUCFG2 - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemRecNInitializeMctLN ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - MEM_DATA_STRUCT *MemPtr; - S_UINT64 SMsr; - - MemPtr = NBPtr->MemPtr; - - LibAmdMsrRead (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader); - if (SMsr.lo & ((UINT32) 1 << 15)) { - NBPtr->ClToNbFlag = TRUE; - } - SMsr.lo |= (UINT32) 1 << 15; // ClLinesToNbDis - LibAmdMsrWrite (BU_CFG2, (UINT64 *)&SMsr, &MemPtr->StdHeader); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ |