diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c')
| -rw-r--r-- | src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c | 726 |
1 files changed, 0 insertions, 726 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c b/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c deleted file mode 100644 index 384f96a23f..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Recovery/Mem/NB/LN/mrnln.c +++ /dev/null @@ -1,726 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mrnln.c - * - * Common Northbridge functions for Llano Recovery - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Proc/Recovery/Mem) - * @e \$Revision: 48317 $ @e \$Date: 2011-03-08 01:38:14 +0800 (Tue, 08 Mar 2011) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "mrport.h" -#include "cpuFamRegisters.h" -#include "cpuRegisters.h" -#include "cpuFamilyTranslation.h" -#include "mm.h" -#include "mn.h" -#include "mrnln.h" -#include "heapManager.h" -#include "AdvancedApi.h" -#include "Filecode.h" -CODE_GROUP (G2_PEI) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_RECOVERY_MEM_NB_LN_MRNLN_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -#define SPLIT_CHANNEL 0x20000000 -#define CHANNEL_SELECT 0x10000000 -#define MAX_DELAYS 9 /* 8 data bytes + 1 ECC byte */ -#define MAX_DIMMS 4 /* 4 DIMMs per channel */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ -CONST MEM_FREQ_CHANGE_PARAM RecFreqChangeParamLN = {0x0190, NULL, 8, 14, 3}; - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -VOID -STATIC -MemRecNSwitchChannelLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Channel - ); - -VOID -STATIC -MemRecNInitNBRegTableLN ( - IN OUT TSEFO *NBRegTable - ); - -UINT32 -STATIC -MemRecNCmnGetSetFieldLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN BIT_FIELD_NAME FieldName, - IN UINT32 Field - ); - -UINT32 -STATIC -MemRecNcmnGetSetTrainDlyLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ); - -BOOLEAN -STATIC -MemRecNIsIdSupportedLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN CPU_LOGICAL_ID *LogicalIdPtr - ); - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -/* -----------------------------------------------------------------------------*/ -/** - * - * This function initializes the northbridge block - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT - * @param[in] NodeID - Node ID for this NB block - * - * @return TRUE - This node is a Llano and this NB block has been initialized - * @return FALSE - This node is not a Llano - */ - -BOOLEAN -MemRecConstructNBBlockLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT MEM_DATA_STRUCT *MemPtr, - IN UINT8 NodeID - ) -{ - UINT8 i; - UINT8 Dct; - UINT8 Channel; - DIE_STRUCT *MCTPtr; - ALLOCATE_HEAP_PARAMS AllocHeapParams; - - // - // Determine if this is the expected NB Type - // - GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); - if (!MemRecNIsIdSupportedLN (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) { - return FALSE; - } - - // - // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs - // - MCTPtr = &MemPtr->DiesPerSystem[NodeID]; - AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_LN * ( - sizeof (DCT_STRUCT) + ( - MAX_CHANNELS_PER_DCT_LN * ( - sizeof (CH_DEF_STRUCT) + ( - MAX_DIMMS * MAX_DELAYS * NUMBER_OF_DELAY_TABLES - ) - ) - ) - ) + (sizeof (TSEFO) * BFEndOfList); - AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0); - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) { - return FALSE; - } - - MemPtr->DieCount = 1; - MCTPtr->DctCount = MAX_DCTS_PER_NODE_LN; - MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr; - AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_LN * sizeof (DCT_STRUCT); - for (Dct = 0; Dct < MAX_DCTS_PER_NODE_LN; Dct++) { - MCTPtr->DctData[Dct].Dct = Dct; - MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_LN; - MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr; - MCTPtr->DctData[Dct].ChData[0].ChannelID = Dct; - AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_LN * sizeof (CH_DEF_STRUCT); - for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_LN; Channel++) { - MCTPtr->DctData[Dct].ChData[Channel].RcvEnDlys = (UINT16 *) AllocHeapParams.BufferPtr; - AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS) * 2; - MCTPtr->DctData[Dct].ChData[Channel].WrDqsDlys = AllocHeapParams.BufferPtr; - MCTPtr->DctData[Dct].ChData[Channel].Dct = Dct; - AllocHeapParams.BufferPtr += (MAX_DIMMS * MAX_DELAYS); - } - } - - // - // Initialize NB block's variables - // - NBPtr->NBRegTable = (TSEFO *) AllocHeapParams.BufferPtr; - NBPtr->MemPtr = MemPtr; - NBPtr->RefPtr = MemPtr->ParameterListPtr; - NBPtr->MCTPtr = &MemPtr->DiesPerSystem[NodeID]; - NBPtr->SPDPtr = MemPtr->SpdDataStructure; - NBPtr->AllNodeSPDPtr = MemPtr->SpdDataStructure; - - NBPtr->DctCachePtr = NBPtr->DctCache; - - MemRecNInitNBRegTableLN (NBPtr->NBRegTable); - NBPtr->Dct = 0; - NBPtr->Channel = 0; - NBPtr->VarMtrrHiMsk = MemRecGetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); - NBPtr->FreqChangeParam = (MEM_FREQ_CHANGE_PARAM *) &RecFreqChangeParamLN; - LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader); - LibAmdMemFill (NBPtr->IsSupported, FALSE, sizeof (NBPtr->IsSupported), &NBPtr->MemPtr->StdHeader); - for (i = 0; i < NumberOfHooks; i++) { - NBPtr->FamilySpecificHook[i] = (BOOLEAN (*) (MEM_NB_BLOCK *, VOID *)) MemRecDefTrue; - } - - NBPtr->InitRecovery = MemRecNMemInitLN; - - NBPtr->RecModeDefRegArray = NULL; - - NBPtr->SwitchNodeRec = (VOID (*) (MEM_NB_BLOCK *, UINT8)) MemRecDefRet; - NBPtr->SwitchDCT = MemRecNSwitchDctLN; - NBPtr->SwitchChannel = MemRecNSwitchChannelLN; - NBPtr->SetMaxLatency = MemRecNSetMaxLatencyLN; - NBPtr->GetSysAddrRec = MemRecNGetMCTSysAddrNb; - NBPtr->SendMrsCmd = MemRecNSendMrsCmdNb; - NBPtr->sendZQCmd = MemRecNSendZQCmdNb; - NBPtr->SetDramOdtRec = MemRecNSetDramOdtLN; - - NBPtr->GetBitField = MemRecNGetBitFieldNb; - NBPtr->SetBitField = MemRecNSetBitFieldNb; - NBPtr->GetTrainDly = MemRecNGetTrainDlyNb; - NBPtr->SetTrainDly = MemRecNSetTrainDlyNb; - - NBPtr->MemRecNCmnGetSetFieldNb = MemRecNCmnGetSetFieldLN; - NBPtr->MemRecNcmnGetSetTrainDlyNb = MemRecNcmnGetSetTrainDlyLN; - NBPtr->MemRecNSwitchDctNb = MemRecNSwitchDctLN; - NBPtr->MemRecNInitializeMctNb = MemRecNInitializeMctLN; - NBPtr->MemRecNFinalizeMctNb = MemRecNFinalizeMctLN; - NBPtr->IsSupported[DramModeAfterDimmPres] = TRUE; - NBPtr->TrainingFlow = MemNRecTrainingFlowClientNb; - NBPtr->ReadPattern = MemRecNContReadPatternClientNb; - NBPtr->FamilySpecificHook[ReEnablePhyComp] = MemRecNReEnablePhyCompNb; - MemRecNSwitchDctLN (NBPtr, 0); - - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the current DCT to work on. - * Should be called before accessing a certain DCT - * All data structures will be updated to point to the current DCT - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] Dct - ID of the target DCT - * - */ - -VOID -MemRecNSwitchDctLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Dct - ) -{ - NBPtr->Dct = Dct & 1; - NBPtr->SPDPtr = &(NBPtr->AllNodeSPDPtr[Dct * MAX_DIMMS_PER_CHANNEL]); - NBPtr->DCTPtr = &(NBPtr->MCTPtr->DctData[NBPtr->Dct]); - - MemRecNSwitchChannelLN (NBPtr, NBPtr->Channel); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the current channel to work on. - * Should be called before accessing a certain channel - * All data structures will be updated to point to the current channel - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] Channel - ID of the target channel - * - */ - -VOID -STATIC -MemRecNSwitchChannelLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Channel - ) -{ - NBPtr->Channel = Channel & 1; - NBPtr->ChannelPtr = &(NBPtr->DCTPtr->ChData[NBPtr->Channel]); -} -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function gets or set DQS timing during training. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - type of delay to be set - * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed - * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding - * @param[in] Field - Value to be programmed - * @param[in] IsSet - Indicates if the function will set or get - * - * @return value read, if the function is used as a "get" - */ - -UINT32 -STATIC -MemRecNcmnGetSetTrainDlyLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ) -{ - UINT16 Index; - UINT16 Offset; - UINT32 Value; - UINT32 Address; - UINT8 Dimm; - UINT8 Byte; - - Dimm = DRBN_DIMM (DrbnVar); - Byte = DRBN_BYTE (DrbnVar); - - ASSERT (Dimm < 1); - ASSERT (Byte <= 8); - - switch (TrnDly) { - case AccessRcvEnDly: - Index = 0x10; - break; - case AccessWrDqsDly: - Index = 0x30; - break; - case AccessWrDatDly: - Index = 0x01; - break; - case AccessRdDqsDly: - Index = 0x05; - break; - case AccessPhRecDly: - Index = 0x50; - break; - default: - Index = 0; - IDS_ERROR_TRAP; - } - - switch (TrnDly) { - case AccessRcvEnDly: - case AccessWrDqsDly: - if ((Byte & 0x04) != 0) { - // if byte 4,5,6,7 - Index += 0x10; - } - if ((Byte & 0x02) != 0) { - // if byte 2,3,6,7 - Index++; - } - Offset = 16 * (Byte % 2); - break; - - case AccessRdDqsDly: - Field &= ~ 0x0001; - case AccessWrDatDly: - Index += (Dimm * 0x100); - // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need - // to run AccessPhRecDly sequence. - case AccessPhRecDly: - Index += (Byte / 4); - Offset = 8 * (Byte % 4); - break; - default: - Offset = 0; - IDS_ERROR_TRAP; - } - - Address = Index; - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); - - if (IsSet != 0) { - if (TrnDly == AccessPhRecDly) { - Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03]; - } - - Value = ((UINT32)Field << Offset) | (Value & (~((UINT32)0xFF << Offset))); - MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - - if (TrnDly == AccessPhRecDly) { - NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value; - } - } else { - Value = (Value >> Offset) & 0xFF; - } - - return Value; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function gets or sets a value to a bit field in a PCI register. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] FieldName - Name of Field to be set * @param[in] Field - Value to be programmed - * @param[in] IsSet - Indicates if the function will set or get - * - * @return value read, if the function is used as a "get" - */ - -UINT32 -STATIC -MemRecNCmnGetSetFieldLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN BIT_FIELD_NAME FieldName, - IN UINT32 Field - ) -{ - SBDFO Address; - PCI_ADDR PciAddr; - UINT8 Type; - UINT32 Value; - UINT32 Highbit; - UINT32 Lowbit; - UINT32 Mask; - - Value = 0; - if (FieldName < BFEndOfList) { - Address = NBPtr->NBRegTable[FieldName]; - if (Address != 0) { - Lowbit = TSEFO_END (Address); - Highbit = TSEFO_START (Address); - Type = TSEFO_TYPE (Address); - - // If Fn2 and DCT1 selected, set Address to be 1xx - if (((Address & 0xF000) == 0x2000) && (NBPtr->Dct != 0)) { - Address |= 0x0100; - } - if ((Address >> 29) == ((DCT_PHY_ACCESS << 1) | 1)) { - // Special DCT Phy access - Address &= 0x0FFFFFFF; - Lowbit = 0; - Highbit = 16; - } else { - // Normal DCT Phy access - Address = TSEFO_OFFSET (Address); - } - - - if (Type == NB_ACCESS) { - Address |= (((UINT32) (24 + 0)) << 15); - PciAddr.AddressValue = Address; - LibAmdPciRead (AccessWidth32, PciAddr, &Value, &NBPtr->MemPtr->StdHeader); - } else if (Type == DCT_PHY_ACCESS) { - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - Value = MemRecNGetBitFieldNb (NBPtr, BFDctAddlDataReg); - } else if (Type == DCT_EXTRA) { - MemRecNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address); - Value = MemRecNGetBitFieldNb (NBPtr, BFDctExtraDataReg); - } else { - IDS_ERROR_TRAP; - } - - if (IsSet != 0) { - // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case - if ((Highbit - Lowbit) != 31) { - Mask = (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); - } else { - Mask = (UINT32)0xFFFFFFFF; - } - Value &= ~(Mask << Lowbit); - Value |= (Field & Mask) << Lowbit; - - if (Type == NB_ACCESS) { - PciAddr.AddressValue = Address; - LibAmdPciWrite (AccessWidth32, PciAddr , &Value, &NBPtr->MemPtr->StdHeader); - } else if (Type == DCT_PHY_ACCESS) { - MemRecNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemRecNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - } else if (Type == DCT_EXTRA) { - MemRecNSetBitFieldNb (NBPtr, BFDctExtraDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemRecNSetBitFieldNb (NBPtr, BFDctExtraOffsetReg, Address); - } else { - IDS_ERROR_TRAP; - } - } else { - Value = Value >> Lowbit; // Shift - // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case - if ((Highbit - Lowbit) != 31) { - Value &= (((UINT32)1 << (Highbit - Lowbit + 1)) - 1); - } - } - } - } else { - IDS_ERROR_TRAP; // Invalid bit field index - } - return Value; -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function initializes bit field translation table - * - * @param[in,out] *NBRegTable - Pointer to the NB Table - * - */ - -VOID -STATIC -MemRecNInitNBRegTableLN ( - IN OUT TSEFO *NBRegTable - ) -{ - UINT16 i; - for (i = 0; i <= BFEndOfList; i++) { - NBRegTable[i] = 0; - } - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x00), 31, 0, BFDevVendorIDReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (0, 0x60), 2, 0, BFNodeID); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x40), 31, 0, BFDramBaseReg0); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (1, 0x44), 31, 0, BFDramLimitReg0); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x40), 31, 0, BFCSBaseAddr0Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x44), 31, 0, BFCSBaseAddr1Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x48), 31, 0, BFCSBaseAddr2Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x4C), 31, 0, BFCSBaseAddr3Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x60), 31, 0, BFCSMask0Reg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x64), 31, 0, BFCSMask1Reg); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 0, BFDramControlReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 0, BFDramInitRegReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x80), 31, 0, BFDramBankAddrReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 31, 0, BFDramMRSReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 9, 7, BFDramTerm); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x84), 11, 10, BFDramTermDyn); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x88), 31, 0, BFDramTimingLoReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 31, 0, BFDramTimingHiReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 31, 0, BFDramConfigLoReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 31, 0, BFDramConfigHiReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x98), 31, 0, BFDctAddlOffsetReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x9C), 31, 0, BFDctAddlDataReg); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 18, 18, BFDqsRcvEnTrain); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x78), 31, 22, BFMaxLatency); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 15, 0, BFMrsAddress); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 18, 16, BFMrsBank); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 22, 20, BFMrsChipSel); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 26, 26, BFSendMrsCmd); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 27, 27, BFDeassertMemRstX); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 28, 28, BFAssertCke); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 29, 29, BFSendZQCmd); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 30, 30, BFSendCtrlWord); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 31, 31, BFEnDramInit); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 7, 7, BFLevel); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x7C), 12, 12, BFMrsQoff); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x8C), 18, 18, BFDisAutoRefresh); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 0, 0, BFInitDram); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 1, 1, BFExitSelfRef); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 17, 17, BFEnterSelfRef); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x90), 27, 27, BFDisDllShutdownSR); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 4, 0, BFMemClkFreq); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 7, 7, BFMemClkFreqVal); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 8, 8, BFDdr3Mode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 9, 9, BFLegacyBiosMode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 11, 10, BFZqcsInterval); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x94), 14, 14, BFDisDramInterface); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xA8), 22, 21, BFDbeGskMemClkAlignMode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF0), 31, 0, BFDctExtraOffsetReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0xF4), 31, 0, BFDctExtraDataReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 8, 8, BFDramEnabled); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x110), 31, 0, BFDctSelBaseAddrReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x114), 31, 0, BFDctSelBaseOffsetReg); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 6, 2, BFDctWrLimit); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x11C), 12, 12, BFPrefCpuDis); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 17, 2, BFTrainLength); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 20, 20, BFDramTrainPdbDis); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 22, 22, BFRdDramTrainMode); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C0), 23, 23, BFRdTrainGo); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1C8), 31, 0, BFWrTrainAdrPtrLo); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (2, 0x1D0), 9, 0, BFWrTrainBufAddr); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xD4), 5, 0, BFMainPllOpFreqId); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0xDC), 26, 20, BFNbPs0NclkDiv); - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (3, 0x188), 22, 22, BFEnCpuSerRdBehindNpIoWr); - - MAKE_TSEFO (NBRegTable, NB_ACCESS, _FN (6, 0x90), 30, 30, BFNbPsCtrlDis); - - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 2, 0, BFCkeDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 6, 4, BFCsOdtDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 10, 8, BFAddrCmdDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 14, 12, BFClkDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 18, 16, BFDataDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 22, 20, BFDqsDrvStren); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x00, 31, 0, BFODCControl); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x04, 31, 0, BFAddrTmgControl); - - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 0, 0, BFWrtLvTrEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 1, 1, BFWrtLvTrMode); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 3, 3, BFPhyFenceTrEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 4, 4, BFTrDimmSel); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 7, 6, BFFenceTrSel); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 11, 8, BFWrLvOdt); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 12, 12, BFWrLvOdtEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 13, 13, BFDqsRcvTrEn); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 21, 15, BFPllMult); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x08, 27, 24, BFPllDiv); - - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0B, 31, 0, BFDramPhyStatusReg); - MAKE_TSEFO (NBRegTable, DCT_PHY_ACCESS, 0x0C, 20, 16, BFPhyFence); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE006, 15, 0, BFPllLockTime); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE013, 15, 0, BFPllRegWaitTime); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F1F, 4, 3, BFDataRxVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2F1F, 4, 3, BFClkRxVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F4009, 15, 14, BFCmpVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8F1F, 4, 3, BFCmdRxVioLvl); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC01F, 4, 3, BFAddrRxVioLvl); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F31, 14, 0, BFDataFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2F31, 4, 0, BFClkFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8F31, 4, 0, BFCmdFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC031, 4, 0, BFAddrFence2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0F, 14, 12, BFAlwaysEnDllClks); - - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FE003, 14, 13, BFDisablePredriverCal); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F02, 15, 0, BFDataByteTxPreDriverCal); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F06, 15, 0, BFDataByteTxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F0F0A, 15, 0, BFDataByteTxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8006, 15, 0, BFCmdAddr0TxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F800A, 15, 0, BFCmdAddr0TxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8106, 15, 0, BFCmdAddr1TxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F810A, 15, 0, BFCmdAddr1TxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC006, 15, 0, BFAddrTxPreDriverCal2Pad1); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00A, 15, 0, BFAddrTxPreDriverCal2Pad2); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC00E, 15, 0, BFAddrTxPreDriverCal2Pad3); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC012, 15, 0, BFAddrTxPreDriverCal2Pad4); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8002, 15, 0, BFCmdAddr0TxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F8102, 15, 0, BFCmdAddr1TxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0FC002, 15, 0, BFAddrTxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2002, 15, 0, BFClock0TxPreDriverCalPad0); - MAKE_TSEFO (NBRegTable, DCT_PHY_DIRECT, 0x0D0F2102, 15, 0, BFClock1TxPreDriverCalPad0); - - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x30, 12, 0, BFDbeGskFifoNumerator); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x31, 12, 0, BFDbeGskFifoDenominator); - - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 4, 0, BFDataTxFifoSchedDlySlot0); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 7, 7, BFDataTxFifoSchedDlyNegSlot0); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 12, 8, BFDataTxFifoSchedDlySlot1); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x32, 15, 15, BFDataTxFifoSchedDlyNegSlot1); - - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x40, 31, 0, BFDramTiming0); - MAKE_TSEFO (NBRegTable, DCT_EXTRA, 0x41, 31, 0, BFDramTiming1); - -} - -/*-----------------------------------------------------------------------------*/ -/** - * - * This function matches the CPU_LOGICAL_ID with certain criteria to - * determine if it is supported by this NBBlock. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] *LogicalIdPtr - Pointer to the CPU_LOGICAL_ID - * - * @return TRUE - This node is a Llano. - * @return FALSE - This node is not a Llano. - */ -BOOLEAN -STATIC -MemRecNIsIdSupportedLN ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN CPU_LOGICAL_ID *LogicalIdPtr - ) -{ - if ((LogicalIdPtr->Family & (AMD_FAMILY_12_LN)) != 0) { - return TRUE; - } else { - return FALSE; - } -} |