diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Mem/Tech/DDR3/mtspd3.c')
| -rw-r--r-- | src/vendorcode/amd/agesa/f12/Proc/Mem/Tech/DDR3/mtspd3.c | 1156 |
1 files changed, 0 insertions, 1156 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/Tech/DDR3/mtspd3.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/Tech/DDR3/mtspd3.c deleted file mode 100644 index e0a1850ddc..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Mem/Tech/DDR3/mtspd3.c +++ /dev/null @@ -1,1156 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mtspd3.c - * - * Technology SPD supporting functions for DDR3 - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/Tech/DDR3) - * @e \$Revision: 49133 $ @e \$Date: 2011-03-17 16:54:42 +0800 (Thu, 17 Mar 2011) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "AdvancedApi.h" -#include "Ids.h" -#include "mport.h" -#include "mm.h" -#include "mn.h" -#include "mt.h" -#include "mt3.h" -#include "mu.h" -#include "mtspd3.h" -#include "mftds.h" -#include "GeneralServices.h" -#include "Filecode.h" -CODE_GROUP (G1_PEICC) -RDATA_GROUP (G1_PEICC) - -#define FILECODE PROC_MEM_TECH_DDR3_MTSPD3_FILECODE - -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -BOOLEAN -STATIC -MemTCRCCheck3 ( - IN OUT UINT8 *SPDPtr - ); - -UINT8 -STATIC -MemTSPDGetTCL3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ); - -BOOLEAN -STATIC -MemTCheckBankAddr3 ( - IN UINT8 Encode, - OUT UINT8 *Index - ); - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -extern BUILD_OPT_CFG UserOptions; - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the DRAM mode - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return TRUE - indicates that the DRAM mode is set to DDR3 - */ - -BOOLEAN -MemTSetDramMode3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFLegacyBiosMode, 0); - TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDdr3Mode, 1); - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function determines if DIMMs are present. It checks checksum and interrogates the SPDs - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return TRUE - indicates that a FATAL error has not occurred - * @return FALSE - indicates that a FATAL error has occurred - */ - -BOOLEAN -MemTDIMMPresence3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 Dct; - UINT8 Channel; - UINT8 i; - MEM_PARAMETER_STRUCT *RefPtr; - UINT8 *SpdBufferPtr = NULL; - DIE_STRUCT *MCTPtr; - DCT_STRUCT *DCTPtr; - CH_DEF_STRUCT *ChannelPtr; - MEM_NB_BLOCK *NBPtr; - BOOLEAN SPDCtrl; - UINT8 Devwidth; - UINT8 MaxDimms; - UINT8 Value8; - UINT16 DimmMask; - - NBPtr = TechPtr->NBPtr; - RefPtr = NBPtr->RefPtr; - MCTPtr = NBPtr->MCTPtr; - - SPDCtrl = UserOptions.CfgIgnoreSpdChecksum; - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - NBPtr->SwitchDCT (NBPtr, Dct); - DCTPtr = NBPtr->DCTPtr; - for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) { - NBPtr->SwitchChannel (NBPtr, Channel); - ChannelPtr = NBPtr->ChannelPtr; - ChannelPtr->DimmQrPresent = 0; - // - // Get the maximum number of DIMMs - // - MaxDimms = MAX_DIMMS_PER_CHANNEL; - for (i = 0; i < MaxDimms; i++) { - // Bitmask representing dimm #i. - DimmMask = (UINT16)1 << i; - // - if (MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i)) { - MCTPtr->DimmPresent |= DimmMask; - // - // Check for valid checksum value - // - AGESA_TESTPOINT (TpProcMemSPDChecking, &(NBPtr->MemPtr->StdHeader)); - if (SpdBufferPtr[SPD_TYPE] == JED_DDR3SDRAM) { - ChannelPtr->ChDimmValid |= DimmMask; - MCTPtr->DimmValid |= DimmMask; - } else { - // Current socket is set up to only support DDR3 dimms. - IDS_ERROR_TRAP; - } - if (!MemTCRCCheck3 (SpdBufferPtr) && !SPDCtrl) { - // - // NV_SPDCHK_RESTRT is set to 0, - // cannot ignore faulty SPD checksum - // - // Indicate checksum error - ChannelPtr->DimmSpdCse |= DimmMask; - PutEventLog (AGESA_ERROR, MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - SetMemError (AGESA_ERROR, MCTPtr); - } - // - // Check module type information. - // - if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_LRDIMM) { - // - // LRDIMMS - // - ChannelPtr->LrDimmPresent |= DimmMask; - MCTPtr->LrDimmPresent |= DimmMask; - if (!UserOptions.CfgMemoryLRDimmCapable) { - PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_LRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - IDS_ERROR_TRAP; - } - } - if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_RDIMM || SpdBufferPtr[SPD_DIMM_TYPE] == JED_MINIRDIMM) { - // - // RDIMMS - // - ChannelPtr->RegDimmPresent |= DimmMask; - MCTPtr->RegDimmPresent |= DimmMask; - if (!UserOptions.CfgMemoryRDimmCapable) { - PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_RDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - IDS_ERROR_TRAP; - } - } - if ((SpdBufferPtr[SPD_DIMM_TYPE] == JED_UDIMM) && !UserOptions.CfgMemoryUDimmCapable) { - PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - IDS_ERROR_TRAP; - } - if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_SODIMM) { - ChannelPtr->SODimmPresent |= DimmMask; - if (!UserOptions.CfgMemorySODimmCapable) { - PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_SODIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - IDS_ERROR_TRAP; - } - } - // - // Check error correction type - // - if ((SpdBufferPtr[SPD_ECCBITS] & JED_ECC) != 0) { - MCTPtr->DimmEccPresent |= DimmMask; // Dimm has ECC - } - // - // Get the Dimm width data - // - Devwidth = SpdBufferPtr[SPD_DEV_WIDTH] & 0x7; - switch (Devwidth) { - case 0: - ChannelPtr->Dimmx4Present |= DimmMask; - Devwidth = 4; - break; - case 1: - ChannelPtr->Dimmx8Present |= DimmMask; - Devwidth = 8; - break; - case 2: - ChannelPtr->Dimmx16Present |= DimmMask; - Devwidth = 16; - break; - default: - IDS_ERROR_TRAP; - } - // - // Check for 'analysis probe installed' - // if (SpdBufferPtr[SPD_ATTRIB] & JED_PROBE_MSK) - // - // Determine the geometry of the DIMM module - // if (SpdBufferPtr[SPD_DM_BANKS] & SP_DPL_BIT) - // - // specify the number of ranks - // - Value8 = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1; - if (Value8 == 5) { - // Octal Rank - Value8 = 8; - } - // - // For LRDIMMS we will assume that if there are at least 4 Physical ranks, then it Could be used - // as a QR RDIMM with a rank Mux of x1 and therefore all four CS will be used. So an 8R LRDIMM will - // be marked as a QR even if Rank multiplication allows it to use only 2 logical ranks. - // - if ((ChannelPtr->LrDimmPresent & DimmMask) != 0) { - // - // LRDIMM Physical Ranks - // - ChannelPtr->LrdimmPhysicalRanks[i] = Value8; - } - if (Value8 > 2) { - if (!UserOptions.CfgMemoryQuadRankCapable) { - PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_QRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - } - // - // Mark this Dimm as Quad Rank - // - ChannelPtr->DimmQrPresent |= DimmMask; - Value8 = 2; - } else if (Value8 == 2) { - ChannelPtr->DimmDrPresent |= DimmMask; // Dual rank dimms - } else { - ChannelPtr->DimmSRPresent |= DimmMask; // Single rank dimms - } - // - // Calculate bus loading per Channel - if (Devwidth == 16) { - Devwidth = 4; - } else if (Devwidth == 4) { - Devwidth = 16; - } - // - // Double Addr bus load value for dual rank DIMMs (Unless LRDIMM) - // - if (((ChannelPtr->LrDimmPresent & DimmMask) == 0) && (Value8 == 2) ) { - Devwidth = Devwidth << 1; - } - // - ChannelPtr->Ranks = ChannelPtr->Ranks + Value8; - ChannelPtr->Loads = ChannelPtr->Loads + Devwidth; - if ((i < 2) || ((ChannelPtr->DimmQrPresent & DimmMask) == 0)) { - ChannelPtr->Dimms++; - } - // - // Check address mirror support for Unbuffered Dimms or LRDimms - // - if ((ChannelPtr->RegDimmPresent & DimmMask) == 0) { - if ((SpdBufferPtr[SPD_ADDRMAP] & 1) != 0) { - ChannelPtr->DimmMirrorPresent |= DimmMask; - } - } - // - // Get byte62: Reference Raw Card information - // - ChannelPtr->RefRawCard[i] = SpdBufferPtr[SPD_RAWCARD] & 0x1F; - // - // Get control word values for RC3, RC4 and RC5 - // - ChannelPtr->CtrlWrd03[i] = SpdBufferPtr[SPD_CTLWRD03] >> 4; - ChannelPtr->CtrlWrd04[i] = SpdBufferPtr[SPD_CTLWRD04] & 0x0F; - ChannelPtr->CtrlWrd05[i] = SpdBufferPtr[SPD_CTLWRD05] >> 4; - // - // Temporarily store info. of SPD byte 63 into CtrlWrd02(s), - // and they will be used late to calculate real RC2 and RC8 value - // - ChannelPtr->CtrlWrd02[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03; - // - // Copy the number of registers to the Ps Block to persist across frequency changes - // - NBPtr->PsPtr->NumOfReg[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03; - // - // Workaround for early revisions of DIMMs which SPD byte 63 is 0 - // - if (NBPtr->PsPtr->NumOfReg[i] == JED_UNDEFINED) { - NBPtr->PsPtr->NumOfReg[i] = 1; - } - } // if DIMM present - } // Dimm loop - - if (Channel == 0) { - DCTPtr->Timings.DctDimmValid = ChannelPtr->ChDimmValid; - DCTPtr->Timings.DimmMirrorPresent = ChannelPtr->DimmMirrorPresent; - DCTPtr->Timings.DimmSpdCse = ChannelPtr->DimmSpdCse; - DCTPtr->Timings.DimmQrPresent = ChannelPtr->DimmQrPresent; - DCTPtr->Timings.DimmDrPresent = ChannelPtr->DimmDrPresent; - DCTPtr->Timings.DimmSRPresent = ChannelPtr->DimmSRPresent; - DCTPtr->Timings.Dimmx4Present = ChannelPtr->Dimmx4Present; - DCTPtr->Timings.Dimmx8Present = ChannelPtr->Dimmx8Present; - DCTPtr->Timings.Dimmx16Present = ChannelPtr->Dimmx16Present; - } - if ((Channel != 1) || (Dct != 1)) { - MCTPtr->DimmPresent <<= 8; - MCTPtr->DimmValid <<= 8; - MCTPtr->RegDimmPresent <<= 8; - MCTPtr->LrDimmPresent <<= 8; - MCTPtr->DimmEccPresent <<= 8; - MCTPtr->DimmParPresent <<= 8; - } - } // Channel loop - } // DCT loop - - // If we have DIMMs, some further general characteristics checking - if (MCTPtr->DimmValid != 0) { - // If there are registered dimms, all the dimms must be registered - if (MCTPtr->RegDimmPresent == MCTPtr->DimmValid) { - // All dimms registered - MCTPtr->Status[SbRegistered] = TRUE; - MCTPtr->Status[SbParDimms] = TRUE; // All DDR3 RDIMMs are parity capable - TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgsRDdr3; // Change the function pointer for DQS ECC timing - } else if (MCTPtr->RegDimmPresent != 0) { - // We have an illegal DIMM mismatch - PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - SetMemError (AGESA_FATAL, MCTPtr); - } - // If there are LrDimms, all the dimms must be LrDimms - if (MCTPtr->LrDimmPresent == MCTPtr->DimmValid) { - // All dimms LRDIMMs - MCTPtr->Status[SbLrdimms] = TRUE; - } else if (MCTPtr->LrDimmPresent != 0) { - // We have an illegal DIMM mismatch - PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - SetMemError (AGESA_FATAL, MCTPtr); - } - - // check the ECC capability of the DIMMs - if (MCTPtr->DimmEccPresent == MCTPtr->DimmValid) { - MCTPtr->Status[SbEccDimms] = TRUE; // All dimms ECC capable - } - } else { - } - - NBPtr->SwitchDCT (NBPtr, 0); - NBPtr->SwitchChannel (NBPtr, 0); - return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function finds the maximum frequency that each channel is capable to run at. - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return TRUE - indicates that a FATAL error has not occurred - * @return FALSE - indicates that a FATAL error has occurred - */ - -BOOLEAN -MemTSPDGetTargetSpeed3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 *SpdBufferPtr = NULL; - UINT8 Dimm; - UINT8 Dct; - UINT8 Channel; - INT32 MTB_ps; - INT32 FTB_ps; - INT32 TCKmin_ps; - INT32 Value32; - MEM_NB_BLOCK *NBPtr; - DCT_STRUCT *DCTPtr; - CH_DEF_STRUCT *ChannelPtr; - - NBPtr = TechPtr->NBPtr; - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - NBPtr->SwitchDCT (NBPtr, Dct); - DCTPtr = NBPtr->DCTPtr; - TCKmin_ps = 0; - for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) { - NBPtr->SwitchChannel (NBPtr, Channel); - ChannelPtr = NBPtr->ChannelPtr; - for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) { - if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) { - MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm); - - // Determine tCKmin(all) which is the largest tCKmin - // value for all modules on the memory Channel (SPD byte 12). - // - MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR]; - FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF); - Value32 = (MTB_ps * SpdBufferPtr[SPD_TCK]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TCK_FTB]) ; - if (TCKmin_ps < Value32) { - TCKmin_ps = Value32; - } - } - } - } - if (TCKmin_ps <= 1071) { - DCTPtr->Timings.TargetSpeed = DDR1866_FREQUENCY; - } else if (TCKmin_ps <= 1250) { - DCTPtr->Timings.TargetSpeed = DDR1600_FREQUENCY; - } else if (TCKmin_ps <= 1500) { - DCTPtr->Timings.TargetSpeed = DDR1333_FREQUENCY; - } else if (TCKmin_ps <= 1875) { - DCTPtr->Timings.TargetSpeed = DDR1066_FREQUENCY; - } else if (TCKmin_ps <= 2500) { - DCTPtr->Timings.TargetSpeed = DDR800_FREQUENCY; - } else { - DCTPtr->Timings.TargetSpeed = DDR667_FREQUENCY; - } - } - - // Ensure the target speed can be applied to all channels of the current node - NBPtr->SyncTargetSpeed (NBPtr); - - // Set the start-up frequency - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - NBPtr->SwitchDCT (NBPtr, Dct); - NBPtr->DCTPtr->Timings.Speed = TechPtr->NBPtr->StartupSpeed; - } - return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function check the symmetry of DIMM pairs (DIMM on Channel A matching with - * DIMM on Channel B), the overall DIMM population, and determine the width mode: - * 64-bit, 64-bit muxed, 128-bit. - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return TRUE - indicates that a FATAL error has not occurred - * @return FALSE - indicates that a FATAL error has occurred - */ - -BOOLEAN -MemTSPDCalcWidth3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 *SpdBufferAPtr = NULL; - UINT8 *SpdBufferBPtr = NULL; - MEM_NB_BLOCK *NBPtr; - DIE_STRUCT *MCTPtr; - DCT_STRUCT *DCTPtr; - UINT8 i; - UINT16 DimmMask; - UINT8 UngangMode; - - NBPtr = TechPtr->NBPtr; - MCTPtr = NBPtr->MCTPtr; - DCTPtr = NBPtr->DCTPtr; - UngangMode = UserOptions.CfgMemoryModeUnganged; - // Does not support ganged mode for DDR3 dimms - ASSERT (UngangMode); - IDS_OPTION_HOOK (IDS_GANGING_MODE, &UngangMode, &(NBPtr->MemPtr->StdHeader)); - - // Check symmetry of channel A and channel B dimms for 128-bit mode - // capability. - // - AGESA_TESTPOINT (TpProcMemModeChecking, &(NBPtr->MemPtr->StdHeader)); - i = 0; - if (!UngangMode) { - if (MCTPtr->DctData[0].Timings.DctDimmValid == MCTPtr->DctData[1].Timings.DctDimmValid) { - for (; i < MAX_DIMMS_PER_CHANNEL; i++) { - DimmMask = (UINT16)1 << i; - if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) { - NBPtr->SwitchDCT (NBPtr, 0); - MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferAPtr, i); - NBPtr->SwitchDCT (NBPtr, 1); - MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferBPtr, i); - // compare rows and columns - if ((SpdBufferAPtr[SPD_ROW_SZ]&0x3F) != (SpdBufferBPtr[SPD_ROW_SZ]&0x3F)) { - break; - } - if ((SpdBufferAPtr[SPD_DENSITY]&0x0F) != (SpdBufferBPtr[SPD_DENSITY]&0x0F)) { - break; - } - // compare ranks and devwidth - if ((SpdBufferAPtr[SPD_DEV_WIDTH]&0x7F) != (SpdBufferBPtr[SPD_DEV_WIDTH]&0x7F)) { - break; - } - } - } - } - if (i < MAX_DIMMS_PER_CHANNEL) { - PutEventLog (AGESA_ALERT, MEM_ALERT_ORG_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - SetMemError (AGESA_ALERT, MCTPtr); - } else { - NBPtr->Ganged = TRUE; - MCTPtr->GangedMode = TRUE; - MCTPtr->Status[Sb128bitmode] = TRUE; - NBPtr->SetBitField (NBPtr, BFDctGangEn, 1); - } - } - - return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * Initialize DCT Timing registers as per DIMM SPD. - * For primary timing (T, CL) use best case T value. - * For secondary timing params., use most aggressive settings - * of slowest DIMM. - * - * Note: - * There are three components to determining "maximum frequency": SPD component, - * Bus load component, and "Preset" max frequency component. - * The SPD component is a function of the min cycle time specified by each DIMM, - * and the interaction of cycle times from all DIMMs in conjunction with CAS - * latency. The SPD component only applies when user timing mode is 'Auto'. - * - * The Bus load component is a limiting factor determined by electrical - * characteristics on the bus as a result of varying number of device loads. The - * Bus load component is specific to each platform but may also be a function of - * other factors. The bus load component only applies when user timing mode is - * ' Auto'. - * - * The Preset component is subdivided into three items and is the minimum of - * the set: Silicon revision, user limit setting when user timing mode is 'Auto' and - * memclock mode is 'Limit', OEM build specification of the maximum frequency. - * The Preset component only applies when user timing mode is 'Auto'. - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return TRUE - indicates that a FATAL error has not occurred - * @return FALSE - indicates that a FATAL error has occurred - */ - -BOOLEAN -MemTAutoCycTiming3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - CONST UINT8 SpdIndexes[] = { - SPD_TRCD, - SPD_TRP, - SPD_TRTP, - SPD_TRAS, - SPD_TRC, - SPD_TWR, - SPD_TRRD, - SPD_TWTR, - SPD_TFAW - }; - - CONST UINT8 SpdFTBIndexes[] = { - SPD_TRCD_FTB, - SPD_TRP_FTB, - 0, - 0, - SPD_TRC_FTB, - 0, - 0, - 0, - 0 - }; - - UINT8 *SpdBufferPtr = NULL; - INT32 MiniMaxTmg[GET_SIZE_OF (SpdIndexes)]; - UINT8 MiniMaxTrfc[4]; - - DIE_STRUCT *MCTPtr; - DCT_STRUCT *DCTPtr; - MEM_NB_BLOCK *NBPtr; - UINT16 DimmMask; - INT32 Value32; - INT32 MTB_ps; - INT32 FTB_ps; - INT32 TCK_ps; - UINT8 i; - UINT8 j; - UINT8 Value8; - UINT8 *StatTmgPtr; - UINT16 *StatDimmTmgPtr; - - NBPtr = TechPtr->NBPtr; - MCTPtr = NBPtr->MCTPtr; - DCTPtr = NBPtr->DCTPtr; - // initialize mini-max arrays - for (j = 0; j < GET_SIZE_OF (MiniMaxTmg); j++) { - MiniMaxTmg[j] = 0; - } - for (j = 0; j < GET_SIZE_OF (MiniMaxTrfc); j++) { - MiniMaxTrfc[j] = 0; - } - - // ====================================================================== - // Get primary timing (CAS Latency and Cycle Time) - // ====================================================================== - // Get OEM specific load variant max - // - - //====================================================================== - // Gather all DIMM mini-max values for cycle timing data - //====================================================================== - // - DimmMask = 1; - for (i = 0; i < (MAX_CS_PER_CHANNEL / 2); i++) { - if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) { - MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i); - MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR]; - FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF); - - for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) { - Value32 = (UINT16)SpdBufferPtr[SpdIndexes[j]]; - if (SpdIndexes[j] == SPD_TRC) { - Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRC] & 0xF0) << 4; - } else if (SpdIndexes[j] == SPD_TRAS) { - Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRAS] & 0x0F) << 8; - } else if (SpdIndexes[j] == SPD_TFAW) { - Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TFAW] & 0x0F) << 8; - } - - Value32 *= MTB_ps; - if (SpdFTBIndexes[j] != 0) { - Value32 += (FTB_ps * (INT8) SpdBufferPtr[SpdFTBIndexes[j]]) ; - } - if (MiniMaxTmg[j] < Value32) { - MiniMaxTmg[j] = Value32; - } - } - - // get Trfc0 - Trfc3 values - Value8 = SpdBufferPtr[SPD_DENSITY] & 0x0F; - if (MiniMaxTrfc[i] < Value8) { - MiniMaxTrfc[i] = Value8; - } - } - DimmMask <<= 1; - } - - // ====================================================================== - // Convert DRAM CycleTiming values and store into DCT structure - // ====================================================================== - // - TCK_ps = 1000500 / DCTPtr->Timings.Speed; - - StatDimmTmgPtr = &DCTPtr->Timings.DIMMTrcd; - StatTmgPtr = &DCTPtr->Timings.Trcd; - for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) { - Value32 = MiniMaxTmg[j]; - - MiniMaxTmg[j] = (MiniMaxTmg[j] + TCK_ps - 1) / TCK_ps; - - StatDimmTmgPtr[j] = (UINT16) (Value32 / (1000 / 40)); - StatTmgPtr[j] = (UINT8) MiniMaxTmg[j]; - } - DCTPtr->Timings.Trfc0 = MiniMaxTrfc[0]; - DCTPtr->Timings.Trfc1 = MiniMaxTrfc[1]; - DCTPtr->Timings.Trfc2 = MiniMaxTrfc[2]; - DCTPtr->Timings.Trfc3 = MiniMaxTrfc[3]; - - DCTPtr->Timings.CasL = MemTSPDGetTCL3 (TechPtr); - - //====================================================================== - // Program DRAM Timing values - //====================================================================== - // - NBPtr->ProgramCycTimings (NBPtr); - - MemFInitTableDrive (NBPtr, MTAfterAutoCycTiming); - - return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sets the bank addressing, program Mask values and build a chip-select population map. - * This routine programs PCI 0:24N:2x80 config register. - * This routine programs PCI 0:24N:2x60,64,68,6C config registers (CS Mask 0-3) - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return TRUE - indicates that a FATAL error has not occurred - * @return FALSE - indicates that a FATAL error has occurred - */ - -BOOLEAN -MemTSPDSetBanks3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 *SpdBufferPtr = NULL; - UINT8 i; - UINT8 ChipSel; - UINT8 DimmID; - UINT8 Value8; - UINT8 Rows; - UINT8 Cols; - UINT8 Ranks; - UINT8 Banks; - UINT32 BankAddrReg; - UINT32 CsMask; - UINT16 CSSpdCSE; - UINT16 CSExclude; - UINT16 DimmQRDR; - DIE_STRUCT *MCTPtr; - DCT_STRUCT *DCTPtr; - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - MCTPtr = NBPtr->MCTPtr; - DCTPtr = NBPtr->DCTPtr; - BankAddrReg = 0; - CSSpdCSE = 0; - CSExclude = 0; - - for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) { - DimmID = ChipSel >> 1; - - DimmQRDR = (DCTPtr->Timings.DimmQrPresent) | (DCTPtr->Timings.DimmDrPresent); - if ((DCTPtr->Timings.DimmSpdCse & ((UINT16) 1 << DimmID)) != 0) { - CSSpdCSE |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3 : 1) << ChipSel; - } - if ((DCTPtr->Timings.DimmExclude & ((UINT16) 1 << DimmID)) != 0) { - CSExclude |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3: 1) << ChipSel; - } - - if ((DCTPtr->Timings.DctDimmValid & ((UINT16)1 << DimmID)) != 0) { - MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, DimmID); - - // Get the basic data - Rows = (SpdBufferPtr[SPD_ROW_SZ] >> 3) & 0x7; - Cols = SpdBufferPtr[SPD_COL_SZ] & 0x7; - Banks = (SpdBufferPtr[SPD_L_BANKS] >> 4) & 0x7; - Ranks = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1; - if (Ranks == 5) { - Ranks = 8; - } - - // - // Configure the bank encoding - // Use a 6-bit key into a lookup table. - // Key (index) = RRRBCC, where CC is the number of Columns minus 9, - // RRR is the number of Rows minus 12, and B is the number of banks - // minus 3. - // - Value8 = Cols; - Value8 |= (Banks == 1) ? 4 : 0; - Value8 |= Rows << 3; - - if (MemTCheckBankAddr3 (Value8, &i)) { - BankAddrReg |= ((UINT32)i << (ChipSel << 1)); - - // Mask value=(2pow(rows+cols+banks+3)-1)>>8, - // or 2pow(rows+cols+banks-5)-1 - // - Value8 = (Rows + 12) + (Cols + 9) + (Banks + 3) + 3 - 8; - if (MCTPtr->Status[Sb128bitmode]) { - Value8++; - } - - DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel; - - if (Ranks >= 2) { - DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1); - } - // - // Determine LRDIMM Rank Multiplication - // - if (TechPtr->TechnologySpecificHook[LrdimmRankMultiplication] (TechPtr, &DimmID)) { - // - // Increase the CS Size by the rank multiplication factor - // - Value8 += ((NBPtr->ChannelPtr->LrDimmRankMult[DimmID]) >> 1); - } - - CsMask = ((UINT32)1 << Value8) - 1; - // Update the DRAM CS Mask for this chipselect - NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (ChipSel >> 1), (CsMask & NBPtr->CsRegMsk)); - } else { - // Dimm is not supported, as no address mapping is found. - DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel; - DCTPtr->Timings.CsTestFail |= (UINT16)1 << ChipSel; - if (Ranks >= 2) { - DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1); - DCTPtr->Timings.CsTestFail |= (UINT16)1 << (ChipSel + 1); - } - PutEventLog (AGESA_ERROR, MEM_ERROR_NO_ADDRESS_MAPPING, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, DimmID, &NBPtr->MemPtr->StdHeader); - SetMemError (AGESA_ERROR, MCTPtr); - } - } - } - // For ranks that need to be excluded, the loading of this rank should be considered - // in timing, so need to set CsPresent before setting CsTestFail - if ((CSSpdCSE != 0) || (CSExclude != 0)) { - NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, (CSSpdCSE | CSExclude), &NBPtr->MemPtr->StdHeader); - } - - // If there are no chip selects, we have an error situation. - if (DCTPtr->Timings.CsPresent == 0) { - PutEventLog (AGESA_ERROR, MEM_ERROR_NO_CHIPSELECT, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); - SetMemError (AGESA_ERROR, MCTPtr); - } - - NBPtr->SetBitField (NBPtr, BFDramBankAddrReg, BankAddrReg); - - return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function returns the low bit that will be swapped to enable CS interleaving - * - * @param[in] BankEnc - AddrMap Bank encoding from F2x80 - * @param[in] *LowBit - pointer to low bit - * @param[in] *HiBit - pointer hight bit - * - */ - -VOID -MemTGetCSIntLvAddr3 ( - IN UINT8 BankEnc, - OUT UINT8 *LowBit, - OUT UINT8 *HiBit - ) -{ - CONST UINT8 ArrCodesLo[] = {0, 8, 8, 0, 0, 8, 9, 8, 9, 9, 8, 9}; - CONST UINT8 ArrCodesHi[] = {0, 20, 21, 0, 0, 22, 22, 23, 23, 24, 24, 25}; - ASSERT (BankEnc < GET_SIZE_OF (ArrCodesLo)); - ASSERT (BankEnc < GET_SIZE_OF (ArrCodesHi)); - // return ArrCodes[BankEnc]; - *LowBit = ArrCodesLo[BankEnc]; - *HiBit = ArrCodesHi[BankEnc]; -} - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function determines if the checksum is correct - * - * @param[in] *SPDPtr - Pointer to SPD data - * - * @return TRUE - CRC check passes - * @return FALSE - CRC check fails - */ - -BOOLEAN -STATIC -MemTCRCCheck3 ( - IN OUT UINT8 *SPDPtr - ) -{ - UINT16 Crc; - INT16 i; - INT16 j; - INT16 Count; - - if (SPDPtr[SPD_TYPE] == JED_DDR3SDRAM) { - Count = (SPDPtr[SPD_BYTE_USED] & 0x80) ? 117 : 126; - Crc = 0; - for (j = 0; j < Count; j++) { - Crc = Crc ^ ((UINT16)SPDPtr[j] << 8); - for (i = 0; i < 8; i++) { - if (Crc & 0x8000) { - Crc = (Crc << 1) ^ 0x1021; - } else { - Crc = (Crc << 1); - } - } - } - if (*(UINT16 *) (SPDPtr + 126) == Crc) { - return TRUE; - } - } - - return FALSE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function returns the CAS latency of the current frequency (DCTPtr->Timings.Speed). - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - * @return CAS Latency - */ - -UINT8 -STATIC -MemTSPDGetTCL3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 *SpdBufferPtr = NULL; - UINT8 CLdesired; - UINT8 CLactual; - UINT8 Dimm; - UINT8 Channel; - UINT16 CASLat; - UINT16 Mask16; - INT32 MTB_ps; - INT32 FTB_ps; - INT32 TAAmin_ps; - INT32 TCKproposed_ps; - INT32 Value32; - BOOLEAN CltFail; - MEM_NB_BLOCK *NBPtr; - DCT_STRUCT *DCTPtr; - CH_DEF_STRUCT *ChannelPtr; - - NBPtr = TechPtr->NBPtr; - DCTPtr = NBPtr->DCTPtr; - - CASLat = 0xFFFF; - TAAmin_ps = 0; - CltFail = FALSE; - - for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) { - NBPtr->SwitchChannel (NBPtr, Channel); - ChannelPtr = NBPtr->ChannelPtr; - for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) { - if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) { - MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm); - - // Step 1: Determine the common set of supported CAS Latency - // values for all modules on the memory Channel using the CAS - // Latencies Supported in SPD bytes 14 and 15. - // - CASLat &= ((UINT16)SpdBufferPtr[SPD_CASHI] << 8) | SpdBufferPtr[SPD_CASLO]; - - // Step 2: Determine tAAmin(all) which is the largest tAAmin - // value for all modules on the memory Channel (SPD byte 16). - // - MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR]; - FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF); - Value32 = (MTB_ps * SpdBufferPtr[SPD_TAA]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TAA_FTB]) ; - if (TAAmin_ps < Value32) { - TAAmin_ps = Value32; - } - - // Step 3: Determine tCKmin(all) which is the largest tCKmin - // value for all modules on the memory Channel (SPD byte 12). - // * This step has been done in SPDGetTargetSpeed - } - } - } - - TCKproposed_ps = 1000500 / DCTPtr->Timings.Speed; - - // Step 4: For a proposed tCK value (tCKproposed) between tCKmin(all) and tCKmax, - // determine the desired CAS Latency. If tCKproposed is not a standard JEDEC - // value (2.5, 1.875, 1.5, or 1.25 ns) then tCKproposed must be adjusted to the - // next lower standard tCK value for calculating CLdesired. - // CLdesired = ceiling ( tAAmin(all) / tCKproposed ) - // where tAAmin is defined in Byte 16. The ceiling function requires that the - // quotient be rounded up always. - // - CLdesired = (UINT8) ((TAAmin_ps + TCKproposed_ps - 1) / TCKproposed_ps); - - // Step 5: Choose an actual CAS Latency (CLactual) that is greater than or equal - // to CLdesired and is supported by all modules on the memory Channel as - // determined in step 1. If no such value exists, choose a higher tCKproposed - // value and repeat steps 4 and 5 until a solution is found. - // - CLactual = 4; - for (Mask16 = 1; Mask16 < 0x8000; Mask16 <<= 1) { - if (CASLat & Mask16) { - if (CLdesired <= CLactual) { - break; - } - } - CLactual++; - } - if (Mask16 == 0x8000) { - CltFail = TRUE; - } - - // Step 6: Once the calculation of CLactual is completed, the BIOS must also - // verify that this CAS Latency value does not exceed tAAmax, which is 20 ns - // for all DDR3 speed grades, by multiplying CLactual times tCKproposed. If - // not, choose a lower CL value and repeat steps 5 and 6 until a solution is found. - // - if ((TCKproposed_ps * CLactual) > 20000) { - CltFail = TRUE; - } - - if (!CltFail) { - DCTPtr->Timings.CasL = CLactual; - } else { - // Fail to find supported Tcl, use 6 clocks since it is required for all DDR3 speed bin. - DCTPtr->Timings.CasL = 6; - } - - return DCTPtr->Timings.CasL; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function returns the encoded value of bank address. - * - * @param[in] Encode - RRRBCC, where CC is the number of Columns minus 9, - * RRR is the number of Rows minus 12, and B is the number of banks - * minus 3. - * @param[out] *Index - index in bank address table - * @return TRUE - encoded value is found. - * FALSE - encoded value is not found. - */ - -BOOLEAN -STATIC -MemTCheckBankAddr3 ( - IN UINT8 Encode, - OUT UINT8 *Index - ) -{ - UINT8 i; - CONST UINT8 TabBankAddr[] = { - 0x3F, 0x01, 0x09, 0x3F, 0x3F, 0x11, - 0x0A, 0x19, 0x12, 0x1A, 0x21, 0x22 - }; - - for (i = 0; i < GET_SIZE_OF (TabBankAddr); i++) { - if (Encode == TabBankAddr[i]) { - *Index = i; - return TRUE; - } - } - return FALSE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function returns a pointer to the SPD Buffer of a specific dimm on - * the current channel. - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in,out] **SpdBuffer - Pointer to a pointer to a UINT8 Buffer - * @param[in] Dimm - Dimm number - * - * - * @return BOOLEAN - Value of DimmPresent - * TRUE = Dimm is present, pointer is valid - * FALSE = Dimm is not present, pointer has not been modified. - */ - -BOOLEAN -MemTGetDimmSpdBuffer3 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN OUT UINT8 **SpdBuffer, - IN UINT8 Dimm - ) -{ - CH_DEF_STRUCT *ChannelPtr; - SPD_DEF_STRUCT *SPDPtr; - BOOLEAN DimmPresent; - - DimmPresent = FALSE; - ChannelPtr = TechPtr->NBPtr->ChannelPtr; - ASSERT (Dimm < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0]))) - SPDPtr = ChannelPtr->DimmSpdPtr[Dimm]; - - - if (SPDPtr != NULL) { - DimmPresent = SPDPtr->DimmPresent; - if (DimmPresent) { - *SpdBuffer = SPDPtr->Data; - } - } - return DimmPresent; -} - |