diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnphy.c')
| -rw-r--r-- | src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnphy.c | 1967 |
1 files changed, 0 insertions, 1967 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnphy.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnphy.c deleted file mode 100644 index d84e4172ff..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnphy.c +++ /dev/null @@ -1,1967 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mnphy.c - * - * Common Northbridge Phy support - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/NB) - * @e \$Revision: 52411 $ @e \$Date: 2011-05-06 08:09:07 +0800 (Fri, 06 May 2011) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* *************************************************************************** -* -*/ - - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "mport.h" -#include "mm.h" -#include "mn.h" -#include "mt.h" -#include "mu.h" -#include "PlatformMemoryConfiguration.h" -#include "heapManager.h" -#include "merrhdl.h" -#include "Filecode.h" -CODE_GROUP (G1_PEICC) -RDATA_GROUP (G1_PEICC) -#define FILECODE PROC_MEM_NB_MNPHY_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ -#define UNUSED_CLK 4 - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ -/// Type of an entry for processing phy init compensation for client NB -typedef struct { - BIT_FIELD_NAME IndexBitField; ///< Bit field on which the value is decided - BIT_FIELD_NAME StartTargetBitField; ///< First bit field to be modified - BIT_FIELD_NAME EndTargetBitField; ///< Last bit field to be modified - UINT16 ExtraValue; ///< Extra value needed to be written to bit field - CONST UINT16 (*TxPrePN)[3][5]; ///< Pointer to slew rate table -} PHY_COMP_INIT_CLIENTNB; - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - - - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function gets a delay value a PCI register during training - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - type of delay to be set - * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed - * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding - * - * @return Value read - */ - -UINT32 -MemNGetTrainDlyNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar - ) -{ - return NBPtr->MemNcmnGetSetTrainDly (NBPtr, 0, TrnDly, DrbnVar, 0); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function sets a delay value a PCI register during training - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - type of delay to be set - * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed - * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding - * @param[in] Field - Value to be programmed - * - */ - -VOID -MemNSetTrainDlyNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ) -{ - NBPtr->MemNcmnGetSetTrainDly (NBPtr, 1, TrnDly, DrbnVar, Field); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function executes prototypical Phy fence training function. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemNPhyFenceTrainingNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - NBPtr->MemPPhyFenceTrainingNb (NBPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function executes prototypical Phy fence training function. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemNPhyFenceTrainingUnb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - UINT8 FenceThresholdTxDll; - UINT8 FenceThresholdRxDll; - UINT8 FenceThresholdTxPad; - UINT16 Fence2Data; - - // 1. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=10b. - // 2. Perform phy fence training. - // 3. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxDll]. - MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 2); - MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 30, 26, BFPhyFence); - IDS_HDT_CONSOLE (MEM_FLOW, "\t\tFenceThresholdTxDll\n"); - MemNTrainPhyFenceNb (NBPtr); - FenceThresholdTxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence); - NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxDll); - - // 4. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=001b. - MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x1000); - - // 5. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=01b. - // 6. Perform phy fence training. - // 7. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdRxDll]. - MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 1); - MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 25, 21, BFPhyFence); - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdRxDll\n"); - MemNTrainPhyFenceNb (NBPtr); - FenceThresholdRxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence); - NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdRxDll); - - // 8. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=000b. - MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x0000); - - // 9. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=11b. - // 10. Perform phy fence training. - // 11. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxPad]. - MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 3); - MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 20, 16, BFPhyFence); - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdTxPad\n"); - MemNTrainPhyFenceNb (NBPtr); - FenceThresholdTxPad = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence); - NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxPad); - - // Program Fence2 threshold for Clk, Cmd, and Addr - if (FenceThresholdTxPad < 16) { - MemNSetBitFieldNb (NBPtr, BFClkFence2, FenceThresholdTxPad | 0x10); - MemNSetBitFieldNb (NBPtr, BFCmdFence2, FenceThresholdTxPad | 0x10); - MemNSetBitFieldNb (NBPtr, BFAddrFence2, FenceThresholdTxPad | 0x10); - } else { - MemNSetBitFieldNb (NBPtr, BFClkFence2, 0); - MemNSetBitFieldNb (NBPtr, BFCmdFence2, 0); - MemNSetBitFieldNb (NBPtr, BFAddrFence2, 0); - } - - // Program Fence2 threshold for data - Fence2Data = 0; - if (FenceThresholdTxPad < 16) { - Fence2Data |= FenceThresholdTxPad | 0x10; - } - if (FenceThresholdRxDll < 16) { - Fence2Data |= (FenceThresholdRxDll | 0x10) << 10; - } - if (FenceThresholdTxDll < 16) { - Fence2Data |= (FenceThresholdTxDll | 0x10) << 5; - } - MemNSetBitFieldNb (NBPtr, BFDataFence2, Fence2Data); - NBPtr->FamilySpecificHook[ProgramFence2RxDll] (NBPtr, &Fence2Data); - - if (NBPtr->MCTPtr->Status[SbLrdimms]) { - // 18. If motherboard routing requires CS[7:6] to adopt address timings, e.g. 3 LRDIMMs/ch with CS[7:6] - // routed across all DIMM sockets, BIOS performs the following: - if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_NO_LRDIMM_CS67_ROUTING, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID) != NULL) { - // A. Program D18F2xA8_dct[1:0][CSTimingMux67] = 1. - MemNSetBitFieldNb (NBPtr, BFCSTimingMux67, 1); - // B. Program D18F2x9C_x0D0F_8021_dct[1:0]: - // - DiffTimingEn = 1. - // - IF (D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay] >= - // D18F2x9C_x0D0F_E008_dct[1:0][FenceValue]) THEN Fence = 1 ELSE Fence = 0. - // - Delay = D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay]. - // - MemNSetBitFieldNb (NBPtr, BFDiffTimingEn, 1); - MemNSetBitFieldNb (NBPtr, BFFence, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay) >= MemNGetBitFieldNb (NBPtr, BFFenceValue)) ? 1 : 0); - MemNSetBitFieldNb (NBPtr, BFDelay, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay))); - } - } - - // 19. Reprogram F2x9C_04. - MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl)); - -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function executes Phy fence training - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemNTrainPhyFenceNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - UINT8 Byte; - INT16 Avg; - UINT8 PREvalue; - - if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface)) { - return; - } - - // 1. BIOS first programs a seed value to the phase recovery - // engine registers. - // - IDS_HDT_CONSOLE (MEM_FLOW, "\t\tSeeds: "); - for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) { - // This includes ECC as byte 8 - MemNSetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte), 19); - IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", 19); - } - - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tPhyFenceTrEn = 1"); - // 2. Set F2x[1, 0]9C_x08[PhyFenceTrEn]=1. - MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 1); - - if (!NBPtr->IsSupported[UnifiedNbFence]) { - // 3. Wait 200 MEMCLKs. - MemNWaitXMemClksNb (NBPtr, 200); - } else { - // 3. Wait 2000 MEMCLKs. - MemNWaitXMemClksNb (NBPtr, 2000); - } - - // 4. Clear F2x[1, 0]9C_x08[PhyFenceTrEn]=0. - MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 0); - - // 5. BIOS reads the phase recovery engine registers - // F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52. - // 6. Calculate the average value of the fine delay and subtract 8. - // - Avg = 0; - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t PRE: "); - for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) { - // - // This includes ECC as byte 8. ECC Byte lane (8) is ignored by MemNGetTrainDlyNb function where - // ECC is not supported. - // - PREvalue = (UINT8) (0x1F & MemNGetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte))); - Avg = Avg + ((INT16) PREvalue); - IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", PREvalue); - } - Avg = ((Avg + 8) / 9); // round up - - Avg -= 8; - NBPtr->MemNPFenceAdjustNb (NBPtr, &Avg); - - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFence: %02x\n", Avg); - - // 7. Write the value to F2x[1, 0]9C_x0C[PhyFence]. - MemNSetBitFieldNb (NBPtr, BFPhyFence, Avg); - - // 8. BIOS rewrites F2x[1, 0]9C_x04, DRAM Address/Command Timing Control - // Register delays for both channels. This forces the phy to recompute - // the fence. - // - MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl)); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function initializes the DDR phy compensation logic - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemNInitPhyCompNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - CONST UINT8 TableCompRiseSlew20x[] = {7, 3, 2, 2}; - CONST UINT8 TableCompRiseSlew15x[] = {7, 7, 3, 2}; - CONST UINT8 TableCompFallSlew20x[] = {7, 5, 3, 2}; - CONST UINT8 TableCompFallSlew15x[] = {7, 7, 5, 3}; - UINT8 i; - UINT8 j; - UINT8 CurrDct; - UINT8 CurrChannel; - BOOLEAN MarginImprv; - MarginImprv = FALSE; - CurrDct = NBPtr->Dct; - CurrChannel = NBPtr->Channel; - if (NBPtr->IsSupported[CheckSlewWithMarginImprv]) { - if (NBPtr->MCTPtr->GangedMode == FALSE) { - for (i = 0; i < NBPtr->DctCount; i++) { - MemNSwitchDCTNb (NBPtr, i); - for (j = 0; j < NBPtr->ChannelCount; j++) { - NBPtr->SwitchChannel (NBPtr, j); - if ((NBPtr->ChannelPtr->Dimms == 4) && ((NBPtr->DCTPtr->Timings.Speed == DDR533_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY))) { - MarginImprv = TRUE; - } - } - } - MemNSwitchDCTNb (NBPtr, CurrDct); - NBPtr->SwitchChannel (NBPtr, CurrChannel); - } - } - - // 1. BIOS disables the phy compensation register by programming F2x9C_x08[DisAutoComp]=1 - // 2. BIOS waits 5 us for the disabling of the compensation engine to complete. - // DisAutoComp will be cleared after Dram init has completed - // - MemNSwitchDCTNb (NBPtr, 0); - MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1); - MemUWait10ns (500, NBPtr->MemPtr); - MemNSwitchDCTNb (NBPtr, CurrDct); - - // 3. For each normalized driver strength code read from - // F2x[1, 0]9C_x00[AddrCmdDrvStren], program the - // corresponding 3 bit predriver code in F2x9C_x0A[D3Cmp1NCal, D3Cmp1PCal]. - // - // 4. For each normalized driver strength code read from - // F2x[1, 0]9C_x00[DataDrvStren], program the corresponding - // 3 bit predriver code in F2x9C_x0A[D3Cmp0NCal, D3Cmp0PCal, D3Cmp2NCal, - // D3Cmp2PCal]. - // - j = (UINT8) MemNGetBitFieldNb (NBPtr, BFAddrCmdDrvStren); - i = (UINT8) MemNGetBitFieldNb (NBPtr, BFDataDrvStren); - - MemNSwitchDCTNb (NBPtr, 0); - MemNSetBitFieldNb (NBPtr, BFD3Cmp1NCal, TableCompRiseSlew20x[j]); - MemNSetBitFieldNb (NBPtr, BFD3Cmp1PCal, TableCompFallSlew20x[j]); - - if (NBPtr->IsSupported[CheckSlewWithMarginImprv]) { - MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, (MarginImprv) ? 0 : TableCompRiseSlew15x[i]); - MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, (MarginImprv) ? 0 : TableCompFallSlew15x[i]); - MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, (MarginImprv) ? 0 : TableCompRiseSlew15x[i]); - MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, (MarginImprv) ? 0 : TableCompFallSlew15x[i]); - } - if (NBPtr->IsSupported[CheckSlewWithoutMarginImprv]) { - ASSERT (i <= 3); - MemNSetBitFieldNb (NBPtr, BFD3Cmp0NCal, TableCompRiseSlew15x[i]); - MemNSetBitFieldNb (NBPtr, BFD3Cmp0PCal, TableCompFallSlew15x[i]); - MemNSetBitFieldNb (NBPtr, BFD3Cmp2NCal, TableCompRiseSlew15x[i]); - MemNSetBitFieldNb (NBPtr, BFD3Cmp2PCal, TableCompFallSlew15x[i]); - } - MemNSwitchDCTNb (NBPtr, CurrDct); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This is a general purpose function that executes before DRAM training - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemNBeforeDQSTrainingNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - UINT8 Dct; - UINT8 ChipSel; - UINT32 TestAddrRJ16; - UINT32 RealAddr; - - MemTBeginTraining (NBPtr->TechPtr); - - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - MemNSwitchDCTNb (NBPtr, Dct); - if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { - for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) { - if (MemNGetMCTSysAddrNb (NBPtr, ChipSel, &TestAddrRJ16)) { - - RealAddr = MemUSetUpperFSbase (TestAddrRJ16, NBPtr->MemPtr); - - MemUDummyCLRead (RealAddr); - - MemNSetBitFieldNb (NBPtr, BFErr350, 0x8000); - MemUWait10ns (60, NBPtr->MemPtr); // Wait 300ns - MemNSetBitFieldNb (NBPtr, BFErr350, 0x0000); - MemUWait10ns (400, NBPtr->MemPtr); // Wait 2us - MemUProcIOClFlush (TestAddrRJ16, 1, NBPtr->MemPtr); - break; - } - } - } - if (NBPtr->IsSupported[CheckEccDLLPwrDnConfig]) { - if (!NBPtr->MCTPtr->Status[SbEccDimms]) { - MemNSetBitFieldNb (NBPtr, BFEccDLLPwrDnConf, 0x0010); - } - if (NBPtr->DCTPtr->Timings.Dimmx4Present == 0) { - MemNSetBitFieldNb (NBPtr, BFEccDLLConf, 0x0080); - } - } - } - - MemTEndTraining (NBPtr->TechPtr); -} - -/*-----------------------------------------------------------------------------*/ -/** - * - * Returns the parameters for a requested delay value to be used in training - * The correct Min, Max and Mask are determined based on the type of Delay, - * and the frequency - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - Type of delay - * @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct - * - */ - -VOID -MemNGetTrainDlyParmsNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN TRN_DLY_TYPE TrnDly, - IN OUT TRN_DLY_PARMS *Parms - ) -{ - Parms->Min = 0; - - if (TrnDly == AccessWrDatDly) { - Parms->Max = 0x1F; - Parms->Mask = 0x01F; - } else if (TrnDly == AccessRdDqsDly) { - if ( (NBPtr->IsSupported[CheckMaxRdDqsDlyPtr]) && (NBPtr->DCTPtr->Timings.Speed > DDR667_FREQUENCY) ) { - Parms->Max = 0x3E; - Parms->Mask = 0x03E; - } else { - Parms->Max = 0x1F; - Parms->Mask = 0x01F; - } - } -} - -/*-----------------------------------------------------------------------------*/ -/** - * - * Returns the parameters for a requested delay value to be used in training - * The correct Min, Max and Mask are determined based on the type of Delay, - * and the frequency - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - Type of delay - * @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct - * - */ - -VOID -MemNGetTrainDlyParmsClientNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN TRN_DLY_TYPE TrnDly, - IN OUT TRN_DLY_PARMS *Parms - ) -{ - Parms->Min = 0; - - if (TrnDly == AccessWrDatDly) { - Parms->Max = 0x1F; - Parms->Mask = 0x01F; - } else if (TrnDly == AccessRdDqsDly) { - Parms->Max = 0x3E; - Parms->Mask = 0x03E; - } -} -/*-----------------------------------------------------------------------------*/ -/** - * - * Returns the parameters for a requested delay value to be used in training - * The correct Min, Max and Mask are determined based on the type of Delay, - * and the frequency - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - Type of delay - * @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct - * - */ - -VOID -MemNGetTrainDlyParmsUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN TRN_DLY_TYPE TrnDly, - IN OUT TRN_DLY_PARMS *Parms - ) -{ - Parms->Min = 0; - - if ((TrnDly == AccessWrDatDly) || (TrnDly == AccessRdDqsDly)) { - Parms->Max = 0x1F; - Parms->Mask = 0x01F; - } -} -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function gets or set DQS timing during training. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - type of delay to be set - * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed - * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding - * @param[in] Field - Value to be programmed - * @param[in] IsSet - Indicates if the function will set or get - * - * @return value read, if the function is used as a "get" - */ - -UINT32 -MemNcmnGetSetTrainDlyNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ) -{ - UINT16 Index; - UINT16 Offset; - UINT32 Value; - UINT32 Address; - UINT8 Dimm; - UINT8 Rank; - UINT8 Byte; - UINT8 Nibble; - - Dimm = DRBN_DIMM (DrbnVar); - Rank = DRBN_RANK (DrbnVar); - Byte = DRBN_BYTE (DrbnVar); - Nibble = DRBN_NBBL (DrbnVar); - - ASSERT (Dimm < 4); - ASSERT (Byte <= ECC_DLY); - - switch (TrnDly) { - case AccessRcvEnDly: - Index = 0x10; - break; - case AccessWrDqsDly: - Index = 0x30; - break; - case AccessWrDatDly: - Index = 0x01; - break; - case AccessRdDqsDly: - Index = 0x05; - break; - case AccessPhRecDly: - Index = 0x50; - break; - default: - Index = 0; - IDS_ERROR_TRAP; - } - - switch (TrnDly) { - case AccessRcvEnDly: - case AccessWrDqsDly: - Index += (Dimm * 3); - if (Byte & 0x04) { - // if byte 4,5,6,7 - Index += 0x10; - } - if (Byte & 0x02) { - // if byte 2,3,6,7 - Index++; - } - if (Byte > 7) { - Index += 2; - } - Offset = 16 * (Byte % 2); - Index |= (Rank << 8); - Index |= (Nibble << 9); - break; - - case AccessRdDqsDly: - case AccessWrDatDly: - - if (NBPtr->IsSupported[DimmBasedOnSpeed]) { - if (NBPtr->DCTPtr->Timings.Speed < DDR800_FREQUENCY) { - // if DDR speed is below 800, use DIMM 0 delays for all DIMMs. - Dimm = 0; - } - } - - Index += (Dimm * 0x100); - if (Nibble) { - if (Rank) { - Index += 0xA0; - } else { - Index += 0x70; - } - } else if (Rank) { - Index += 0x60; - } - // fall through - AccessRdDqsDly and AccessWrDatDly also need to run AccessPhRecDly sequence - case AccessPhRecDly: - Index += (Byte / 4); - Offset = 8 * (Byte % 4); - break; - default: - Offset = 0; - IDS_ERROR_TRAP; - } - - Address = Index; - MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE); - Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg); - - if (TrnDly == AccessRdDqsDly) { - NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] (NBPtr, &Offset); - } - - if (IsSet) { - if (TrnDly == AccessPhRecDly) { - Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03]; - } - - Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF) << Offset))); - MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE); - - if (TrnDly == AccessPhRecDly) { - NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value; - } - } else { - Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF); - } - - return Value; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function gets or set DQS timing during training. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] IsSet - Indicates if the function will set or get - * @param[in] TrnDly - type of delay to be set - * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed - * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding - * @param[in] Field - Value to be programmed - * - * @return value read, if the function is used as a "get" - */ -UINT32 -MemNcmnGetSetTrainDlyClientNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ) -{ - UINT16 Index; - UINT16 Offset; - UINT32 Value; - UINT32 Address; - UINT8 Dimm; - UINT8 Byte; - - Dimm = DRBN_DIMM (DrbnVar); - Byte = DRBN_BYTE (DrbnVar); - - ASSERT (Dimm < 2); - ASSERT (Byte <= ECC_DLY); - - if ((Byte > 7)) { - // Llano does not support ECC delay, so: - if (IsSet) { - // On write, ignore - return 0; - } else { - // On read, redirect to byte 0 to correct fence averaging - Byte = 0; - } - } - - switch (TrnDly) { - case AccessRcvEnDly: - Index = 0x10; - break; - case AccessWrDqsDly: - Index = 0x30; - break; - case AccessWrDatDly: - Index = 0x01; - break; - case AccessRdDqsDly: - Index = 0x05; - break; - case AccessPhRecDly: - Index = 0x50; - break; - default: - Index = 0; - IDS_ERROR_TRAP; - } - - switch (TrnDly) { - case AccessRcvEnDly: - case AccessWrDqsDly: - Index += (Dimm * 3); - if (Byte & 0x04) { - // if byte 4,5,6,7 - Index += 0x10; - } - if (Byte & 0x02) { - // if byte 2,3,6,7 - Index++; - } - Offset = 16 * (Byte % 2); - break; - - case AccessRdDqsDly: - case AccessWrDatDly: - Index += (Dimm * 0x100); - // fall through - AccessRdDqsDly and AccessWrDatDly also need to run AccessPhRecDly sequence - case AccessPhRecDly: - Index += (Byte / 4); - Offset = 8 * (Byte % 4); - break; - default: - Offset = 0; - IDS_ERROR_TRAP; - } - - Address = Index; - MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg); - - if (IsSet) { - if (TrnDly == AccessPhRecDly) { - Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03]; - } - - Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF) << Offset))); - MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - - if (TrnDly == AccessPhRecDly) { - NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value; - } - // Gross WrDatDly and WrDqsDly cannot be larger than 4 - ASSERT (((TrnDly == AccessWrDatDly) || (TrnDly == AccessWrDqsDly)) ? (NBPtr->IsSupported[WLNegativeDelay] || (Field < 0xA0)) : TRUE); - } else { - Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x1FF : 0xFF); - } - - return Value; -} -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function gets or set DQS timing during training. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] TrnDly - type of delay to be set - * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed - * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding - * @param[in] Field - Value to be programmed - * @param[in] IsSet - Indicates if the function will set or get - * - * @return value read, if the function is used as a "get" - */ - -UINT32 -MemNcmnGetSetTrainDlyUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 IsSet, - IN TRN_DLY_TYPE TrnDly, - IN DRBN DrbnVar, - IN UINT16 Field - ) -{ - UINT16 Index; - UINT16 Offset; - UINT32 Value; - UINT32 Address; - UINT8 Dimm; - UINT8 Rank; - UINT8 Byte; - UINT8 Nibble; - - Dimm = DRBN_DIMM (DrbnVar); - Rank = DRBN_RANK (DrbnVar); - Byte = DRBN_BYTE (DrbnVar); - Nibble = DRBN_NBBL (DrbnVar); - - ASSERT (Dimm < 4); - ASSERT (Byte <= ECC_DLY); - if ((Byte == ECC_DLY) && !NBPtr->MCTPtr->Status[SbEccDimms]) { - // When ECC is not enabled - if (IsSet) { - // On write, ignore - return 0; - } else { - // On read, redirect to byte 0 to correct fence averaging - Byte = 0; - } - } - - switch (TrnDly) { - case AccessRcvEnDly: - Index = 0x10; - break; - case AccessWrDqsDly: - Index = 0x30; - break; - case AccessWrDatDly: - Index = 0x01; - break; - case AccessRdDqsDly: - Index = 0x05; - break; - case AccessPhRecDly: - Index = 0x50; - break; - default: - Index = 0; - IDS_ERROR_TRAP; - } - - switch (TrnDly) { - case AccessRcvEnDly: - case AccessWrDqsDly: - Index += (Dimm * 3); - if (Byte & 0x04) { - // if byte 4,5,6,7 - Index += 0x10; - } - if (Byte & 0x02) { - // if byte 2,3,6,7 - Index++; - } - if (Byte > 7) { - Index += 2; - } - Offset = 16 * (Byte % 2); - Index |= (Rank << 8); - Index |= (Nibble << 9); - break; - - case AccessRdDqsDly: - case AccessWrDatDly: - - if (NBPtr->IsSupported[DimmBasedOnSpeed]) { - if (NBPtr->DCTPtr->Timings.Speed < DDR800_FREQUENCY) { - // if DDR speed is below 800, use DIMM 0 delays for all DIMMs. - Dimm = 0; - } - } - - Index += (Dimm * 0x100); - if (Nibble) { - if (Rank) { - Index += 0xA0; - } else { - Index += 0x70; - } - } else if (Rank) { - Index += 0x60; - } - // fall through - AccessRdDqsDly and AccessWrDatDly also need to run AccessPhRecDly sequence - case AccessPhRecDly: - Index += (Byte / 4); - Offset = 8 * (Byte % 4); - break; - default: - Offset = 0; - IDS_ERROR_TRAP; - } - - Address = Index; - MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE); - Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg); - - if (TrnDly == AccessRdDqsDly) { - NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] (NBPtr, &Offset); - } - - if (IsSet) { - if (TrnDly == AccessPhRecDly) { - Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03]; - } - - Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF) << Offset))); - MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); - Address |= DCT_ACCESS_WRITE; - MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); - MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE); - - if (TrnDly == AccessPhRecDly) { - NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value; - } - } else { - Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF); - } - - return Value; -} -/* -----------------------------------------------------------------------------*/ -/** - * - * This function initializes the training pattern. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return AGESA_STATUS - Result - * AGESA_SUCCESS - Training pattern is ready to use - * AGESA_ERROR - Unable to initialize the pattern. - */ - -AGESA_STATUS -MemNTrainingPatternInitNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - MEM_TECH_BLOCK *TechPtr; - ALLOCATE_HEAP_PARAMS AllocHeapParams; - TRAIN_PATTERN TrainPattern; - AGESA_STATUS Status; - - TechPtr = NBPtr->TechPtr; - TrainPattern = 0; - // - // Check the training type - // - if (TechPtr->TrainingType == TRN_DQS_POSITION) { - // - // DQS Position Training - // - if (NBPtr->PosTrnPattern == POS_PATTERN_256B) { - // - // 256 Bit pattern - // - if (NBPtr->MCTPtr->Status[Sb128bitmode]) { - TrainPattern = TestPatternJD256B; - TechPtr->PatternLength = 64; - } else { - TrainPattern = TestPatternJD256A; - TechPtr->PatternLength = 32; - } - } else { - // - // 72 bit pattern will be used if PosTrnPattern is not specified - // - if (NBPtr->MCTPtr->Status[Sb128bitmode]) { - TrainPattern = TestPatternJD1B; - TechPtr->PatternLength = 18; - } else { - TrainPattern = TestPatternJD1A; - TechPtr->PatternLength = 9; - } - } - } else if (TechPtr->TrainingType == TRN_MAX_READ_LATENCY) { - // - // Max Read Latency Training - // - TrainPattern = TestPatternML; - TechPtr->PatternLength = (NBPtr->MCTPtr->Status[Sb128bitmode]) ? 6 : 3; - } else { - // - // Error - TechPtr->Training Type must be set to one of the types handled in this function - // - ASSERT (FALSE); - } - // - // Allocate training buffer - // - AllocHeapParams.RequestedBufferSize = (TechPtr->PatternLength * 64 * 2) + 16; - AllocHeapParams.BufferHandle = AMD_MEM_TRAIN_BUFFER_HANDLE; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader); - ASSERT (Status == AGESA_SUCCESS); - if (Status != AGESA_SUCCESS) { - return Status; - } - TechPtr->PatternBufPtr = AllocHeapParams.BufferPtr; - AlignPointerTo16Byte (&TechPtr->PatternBufPtr); - TechPtr->TestBufPtr = TechPtr->PatternBufPtr + (TechPtr->PatternLength * 64); - - // Prepare training pattern - MemUFillTrainPattern (TrainPattern, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64); - - return Status; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function determined the settings for the Reliable Read/Write engine - * for each specific type of training - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] *OptParam - Pointer to an Enum of TRAINING_TYPE - * - * @return TRUE - */ - -BOOLEAN -MemNSetupHwTrainingEngineUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN VOID *OptParam - ) -{ - TRAINING_TYPE TrnType; - RRW_SETTINGS *Rrw; - - TrnType = *(TRAINING_TYPE*) OptParam; - Rrw = &NBPtr->RrwSettings; - // - // Common Settings - // - Rrw->TgtBankAddressA = CPG_BANK_ADDRESS_A; - Rrw->TgtRowAddressA = CPG_ROW_ADDRESS_A; - Rrw->TgtColAddressA = CPG_COL_ADDRESS_A; - Rrw->TgtBankAddressB = CPG_BANK_ADDRESS_B; - Rrw->TgtRowAddressB = CPG_ROW_ADDRESS_B; - Rrw->TgtColAddressB = CPG_COL_ADDRESS_B; - Rrw->CompareMaskHigh = CPG_COMPARE_MASK_HI; - Rrw->CompareMaskLow = CPG_COMPARE_MASK_LOW; - Rrw->CompareMaskEcc = CPG_COMPARE_MASK_ECC; - - switch (TrnType) { - case TRN_RCVR_ENABLE: - // - // Receiver Enable Training - // - NBPtr->TechPtr->PatternLength = 192; - break; - case TRN_MAX_READ_LATENCY: - // - // Max Read Latency Training - // - Rrw->CmdTgt = CMD_TGT_A; - NBPtr->TechPtr->PatternLength = 32; - Rrw->DataPrbsSeed = PRBS_SEED_32; - break; - case TRN_DQS_POSITION: - // - // Read/Write DQS Position training - // - Rrw->CmdTgt = CMD_TGT_AB; - NBPtr->TechPtr->PatternLength = 256; - Rrw->DataPrbsSeed = PRBS_SEED_256; - break; - default: - ASSERT (FALSE); - } - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function finalizes the training pattern. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] Index - Index of Write Data Delay Value - * @param[in,out] *Value - Write Data Delay Value - * @return BOOLEAN - TRUE - Use the value returned. - * FALSE - No more values in table. - */ - -BOOLEAN -MemNGetApproximateWriteDatDelayNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Index, - IN OUT UINT8 *Value - ) -{ - CONST UINT8 WriteDatDelayValue[] = {0x10, 0x4, 0x8, 0xC, 0x14, 0x18, 0x1C, 0x1F}; - if (Index < GET_SIZE_OF (WriteDatDelayValue)) { - *Value = WriteDatDelayValue[Index]; - return TRUE; - } - return FALSE; -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function finalizes the training pattern. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return AGESA_STATUS - Result - * AGESA_SUCCESS - Training pattern has been finalized. - * AGESA_ERROR - Unable to initialize the pattern. - */ - -AGESA_STATUS -MemNTrainingPatternFinalizeNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - AGESA_STATUS Status; - // - // Deallocate training buffer - // - Status = HeapDeallocateBuffer (AMD_MEM_TRAIN_BUFFER_HANDLE, &NBPtr->MemPtr->StdHeader); - ASSERT (Status == AGESA_SUCCESS); - return Status; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function returns the number of chipselects per channel. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return - */ - -UINT8 -MemNCSPerChannelNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - return MAX_CS_PER_CHANNEL; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function returns the number of Chipselects controlled by each set - * of Delay registers under current conditions. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return - */ - -UINT8 -MemNCSPerDelayNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - return MAX_CS_PER_DELAY; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function returns the minimum data eye width in 32nds of a UI for - * the type of data eye(Rd/Wr) that is being trained. This value will - * be the minimum number of consecutive delays that yield valid data. - * Uses TechPtr->Direction to determine read or write. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return - */ - -UINT8 -MemNMinDataEyeWidthNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - if (NBPtr->TechPtr->Direction == DQS_READ_DIR) { - return MIN_RD_DATAEYE_WIDTH_NB; - } else { - return MIN_WR_DATAEYE_WIDTH_NB; - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function programs the phy registers according to the desired phy VDDIO voltage level - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemNPhyVoltageLevelNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - BIT_FIELD_NAME BitField; - BIT_FIELD_NAME BFEnd; - UINT16 BFValue; - UINT16 RegValue; - - BFValue = (UINT16) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage) << 3; - BFEnd = NBPtr->IsSupported[ProgramCsrComparator] ? BFCsrComparator : BFCmpVioLvl; - - for (BitField = BFDataRxVioLvl; BitField <= BFEnd; BitField++) { - RegValue = BFValue; - if (BitField == BFCsrComparator) { - RegValue >>= (3 - 2); - // Setting this bit in DCT0 adjusts the comparator for DCT0 and DCT1. Setting this bit in DCT1 has no effect. - NBPtr->SwitchDCT (NBPtr, 0); - MemNSetBitFieldNb (NBPtr, BitField, RegValue); - break; - } else if (BitField == BFCmpVioLvl) { - RegValue <<= (14 - 3); - } - MemNBrdcstSetNb (NBPtr, BitField, RegValue); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function adjusts Avg PRE value of Phy fence training according to specific CPU family. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] *Value16 - Pointer to the value that we want to adjust - * - */ -VOID -MemNPFenceAdjustUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT INT16 *Value16 - ) -{ - *Value16 += 2; //The Avg PRE value is subtracted by 6 only. -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function initializes the DDR phy compensation logic - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - */ - -VOID -MemNInitPhyCompClientNb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - // Slew rate table array [x][y][z] - // array[0]: slew rate for VDDIO 1.5V - // array[1]: slew rate for VDDIO 1.35V - // array[2]: slew rate for VDDIO 1.25V - // array[x][y]: slew rate for a certain frequency - // array[x][y][0]: frequency mask for current entry - CONST STATIC UINT16 TxPrePNDataDqs[3][3][5] = { - {{ (UINT16) DDR800, 0x924, 0x924, 0x924, 0x924}, - { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6}, - { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}}, - {{ (UINT16) DDR800, 0xFF6, 0xB6D, 0xB6D, 0x924}, - { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6}, - { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}}, - {{ (UINT16) DDR800, 0xFF6, 0xDAD, 0xDAD, 0x924}, - { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6}, - { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}} - }; - CONST STATIC UINT16 TxPrePNCmdAddr[3][3][5] = { - {{ (UINT16) DDR800, 0x492, 0x492, 0x492, 0x492}, - { (UINT16) (DDR1066 + DDR1333), 0x6DB, 0x6DB, 0x6DB, 0x6DB}, - { (UINT16) (DDR1600 + DDR1866), 0xB6D, 0xB6D, 0xB6D, 0xB6D}}, - {{ (UINT16) DDR800, 0x492, 0x492, 0x492, 0x492}, - { (UINT16) (DDR1066 + DDR1333), 0x924, 0x6DB, 0x6DB, 0x6DB}, - { (UINT16) (DDR1600 + DDR1866), 0xB6D, 0xB6D, 0x924, 0x924}}, - {{ (UINT16) DDR800, 0x492, 0x492, 0x492, 0x492}, - { (UINT16) (DDR1066 + DDR1333), 0xDAD, 0x924, 0x6DB, 0x492}, - { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xDAD, 0xB64, 0xB64}} - }; - CONST STATIC UINT16 TxPrePNClock[3][3][5] = { - {{ (UINT16) DDR800, 0x924, 0x924, 0x924, 0x924}, - { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xB6D}, - { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}}, - {{ (UINT16) DDR800, 0xDAD, 0xDAD, 0x924, 0x924}, - { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xDAD}, - { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xDAD}}, - {{ (UINT16) DDR800, 0xDAD, 0xDAD, 0x924, 0x924}, - { (UINT16) (DDR1066 + DDR1333), 0xFF6, 0xFF6, 0xFF6, 0xFF6}, - { (UINT16) (DDR1600 + DDR1866), 0xFF6, 0xFF6, 0xFF6, 0xFF6}} - }; - - CONST PHY_COMP_INIT_CLIENTNB PhyCompInitBitField[] = { - // 3. Program TxPreP/TxPreN for Data and DQS according toTable 14 if VDDIO is 1.5V or Table 15 if 1.35V. - // A. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0[A,6]={0000b, TxPreP, TxPreN}. - // B. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]02={1000b, TxPreP, TxPreN}. - {BFDqsDrvStren, BFDataByteTxPreDriverCal2Pad1, BFDataByteTxPreDriverCal2Pad1, 0, TxPrePNDataDqs}, - {BFDataDrvStren, BFDataByteTxPreDriverCal2Pad2, BFDataByteTxPreDriverCal2Pad2, 0, TxPrePNDataDqs}, - {BFDataDrvStren, BFDataByteTxPreDriverCal, BFDataByteTxPreDriverCal, 8, TxPrePNDataDqs}, - // 4. Program TxPreP/TxPreN for Cmd/Addr according toTable 16 if VDDIO is 1.5V or Table 17 if 1.35V. - // A. Program D18F2x[1,0]9C_x0D0F_[C,8][1:0][12,0E,0A,06]={0000b, TxPreP, TxPreN}. - // B. Program D18F2x[1,0]9C_x0D0F_[C,8][1:0]02={1000b, TxPreP, TxPreN}. - {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCal2Pad1, BFCmdAddr0TxPreDriverCal2Pad2, 0, TxPrePNCmdAddr}, - {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCal2Pad1, BFAddrTxPreDriverCal2Pad4, 0, TxPrePNCmdAddr}, - {BFCsOdtDrvStren, BFCmdAddr0TxPreDriverCalPad0, BFCmdAddr0TxPreDriverCalPad0, 8, TxPrePNCmdAddr}, - {BFCkeDrvStren, BFAddrTxPreDriverCalPad0, BFAddrTxPreDriverCalPad0, 8, TxPrePNCmdAddr}, - {BFAddrCmdDrvStren, BFCmdAddr1TxPreDriverCalPad0, BFCmdAddr1TxPreDriverCalPad0, 8, TxPrePNCmdAddr}, - // 5. Program TxPreP/TxPreN for Clock according toTable 18 if VDDIO is 1.5V or Table 19 if 1.35V. - // A. Program D18F2x[1,0]9C_x0D0F_2[1:0]02={1000b, TxPreP, TxPreN}. - {BFClkDrvStren, BFClock0TxPreDriverCalPad0, BFClock1TxPreDriverCalPad0, 8, TxPrePNClock} - }; - - BIT_FIELD_NAME CurrentBitField; - UINT16 SpeedMask; - CONST UINT16 (*TxPrePNArray)[5]; - UINT8 Voltage; - UINT8 i; - UINT8 j; - UINT8 k; - UINT8 Dct; - - Dct = NBPtr->Dct; - NBPtr->SwitchDCT (NBPtr, 0); - // 1. Program D18F2x[1,0]9C_x0D0F_E003[DisAutoComp, DisablePreDriverCal] = {1b, 1b}. - MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 0x6000); - NBPtr->SwitchDCT (NBPtr, Dct); - - SpeedMask = (UINT16) 1 << (NBPtr->DCTPtr->Timings.Speed / 66); - Voltage = (UINT8) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage); - - for (j = 0; j < GET_SIZE_OF (PhyCompInitBitField); j ++) { - i = (UINT8) MemNGetBitFieldNb (NBPtr, PhyCompInitBitField[j].IndexBitField); - TxPrePNArray = PhyCompInitBitField[j].TxPrePN[Voltage]; - for (k = 0; k < 3; k ++) { - if ((TxPrePNArray[k][0] & SpeedMask) != 0) { - for (CurrentBitField = PhyCompInitBitField[j].StartTargetBitField; CurrentBitField <= PhyCompInitBitField[j].EndTargetBitField; CurrentBitField ++) { - MemNSetBitFieldNb (NBPtr, CurrentBitField, ((PhyCompInitBitField[j].ExtraValue << 12) | TxPrePNArray[k][i + 1])); - } - break; - } - } - ASSERT (k < 3); - } - - NBPtr->FamilySpecificHook[ForceAutoComp] (NBPtr, NBPtr); -} - -/*----------------------------------------------------------------------------- - * - * - * This function re-enable phy compensation. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNReEnablePhyCompNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - UINT8 Dct; - - Dct = NBPtr->Dct; - - NBPtr->SwitchDCT (NBPtr, 0); - // Clear DisableCal and set DisablePredriverCal - MemNSetBitFieldNb (NBPtr, BFDisablePredriverCal, 0x2000); - NBPtr->SwitchDCT (NBPtr, Dct); - - return TRUE; -} - -/*----------------------------------------------------------------------------- - * - * - * This function calculates the value of WrDqDqsEarly and programs it into - * the DCT and adds it to the WrDqsGrossDelay of each byte lane on each - * DIMM of the channel. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNCalcWrDqDqsEarlyUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - MEM_TECH_BLOCK *TechPtr; - DCT_STRUCT *DCTPtr; - CH_DEF_STRUCT *ChannelPtr; - UINT8 Dimm; - UINT8 ByteLane; - UINT8 *WrDqsDlysPtr; - UINT8 WrDqDqsEarly; - - ASSERT ((NBPtr->IsSupported[WLSeedAdjust]) && (NBPtr->IsSupported[WLNegativeDelay])); - - TechPtr = NBPtr->TechPtr; - ChannelPtr = NBPtr->ChannelPtr; - DCTPtr = NBPtr->DCTPtr; - - ASSERT (NBPtr != NULL); - ASSERT (ChannelPtr != NULL); - ASSERT (DCTPtr != NULL); - // - // For each DIMM: - // - The Critical Gross Delay (CGD) is the minimum GrossDly of all byte lanes and all DIMMs. - // - If (CGD < 0) Then - // - D18F2xA8_dct[1:0][WrDqDqsEarly] = ABS(CGD) - // - WrDqsGrossDly = GrossDly + WrDqDqsEarly - // - Else - // - D18F2xA8_dct[1:0][WrDqDqsEarly] = 0. - // - WrDqsGrossDly = GrossDly - // - WrDqDqsEarly = 0; - if (TechPtr->WLCriticalDelay < 0) { - IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCalculating WrDqDqsEarly, adjusting WrDqs.\n"); - // We've saved the entire negative delay value, so take the ABS and convert to GrossDly. - WrDqDqsEarly = (UINT8) (0x00FF &((((ABS (TechPtr->WLCriticalDelay)) + 0x1F) / 0x20))); - // - // Loop through All WrDqsDlys on all DIMMs - // - for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) { - if ((DCTPtr->Timings.CsEnabled & ((UINT16)3 << (Dimm << 1))) != 0) { - IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDimm %x:", Dimm); - WrDqsDlysPtr = &(ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ())]); - for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) { - WrDqsDlysPtr[ByteLane] += (WrDqDqsEarly << 5); - NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDlysPtr[ByteLane]); - IDS_HDT_CONSOLE (MEM_FLOW, " %02x", WrDqsDlysPtr[ByteLane]); - } - IDS_HDT_CONSOLE (MEM_FLOW, "\n"); - } - } - } - MemNSetBitFieldNb (NBPtr, BFWrDqDqsEarly, WrDqDqsEarly); - IDS_HDT_CONSOLE (MEM_FLOW, "\t\tWrDqDqsEarly : %02x\n", WrDqDqsEarly); - return TRUE; -} - -/*----------------------------------------------------------------------------- - * - * - * This function forces phy to M0 state - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] *OptParam - Optional parameter - * - * @return FALSE - always - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNForcePhyToM0Unb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - // 1. Program D18F2x9C_x0D0F_E013_dct[1:0] = 0118h. - MemNBrdcstSetNb (NBPtr, BFPllRegWaitTime, 0x118); - // 2. Force the phy to M0 with the following sequence: - // A. Program D18F2x9C_x0D0F_E006_dct[1:0][PllLockTime] = 190h. Restore the default PLL lock time. - MemNBrdcstSetNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault); - // B. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80800000h. - MemNBrdcstSetNb (NBPtr, BFDramPhyStatusReg, 0x80800000); - NBPtr->SwitchDCT (NBPtr, 0); - // C. Program D18F2x9C_x0D0F_E018_dct[0][PhyPSMasterChannel] = 0. - MemNSetBitFieldNb (NBPtr, BFPhyPSMasterChannel, 0); - // D. Program D18F2x9C_x0000_000B_dct[0] = 40000000h. CH0 only; - MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x40000000); - // E. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80000000h. - MemNBrdcstSetNb (NBPtr, BFDramPhyStatusReg, 0x80000000); - - return FALSE; -} - -/*----------------------------------------------------------------------------- - * - * - * This function sets SkewMemClk before enabling MemClk - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] *OptParam - Optional parameter - * - * @return TRUE - always - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNSetSkewMemClkUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - UINT8 Dct; - - // SkewMemClk is set to 1 if all DCTs are enabled, else 0. - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - MemNSwitchDCTNb (NBPtr, Dct); - if (NBPtr->DCTPtr->Timings.DctMemSize == 0) { - break; - } - } - MemNSwitchDCTNb (NBPtr, 0); - if (Dct == NBPtr->DctCount) { - MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0x10); - } else { - MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0); - } - - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function masks the RdDqsDly Bit 0 before writing to register for UNB. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] *Offset - Bit offset of the field to be programmed - * - * @return TRUE - */ -BOOLEAN -MemNAdjustRdDqsDlyOffsetUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *Offset - ) -{ - *(UINT16*) Offset = *(UINT16*) Offset + 1; - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function delays MEMCLK to prevent WrDqs skew due to negative PRE result. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNCalcWrDqDqsEarlyClientNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - MEM_TECH_BLOCK *TechPtr; - DCT_STRUCT *DCTPtr; - CH_DEF_STRUCT *ChannelPtr; - UINT8 Dimm; - UINT8 ByteLane; - UINT8 *WrDqsDlysPtr; - UINT8 NewClkDllDelay; - UINT16 ClkDllFineDly; - UINT32 AddrCmdTmg; - - TechPtr = NBPtr->TechPtr; - ChannelPtr = NBPtr->ChannelPtr; - DCTPtr = NBPtr->DCTPtr; - - ASSERT (NBPtr != NULL); - ASSERT (ChannelPtr != NULL); - ASSERT (DCTPtr != NULL); - - if (NBPtr->IsSupported[WLNegativeDelay]) { - if (TechPtr->WLCriticalDelay < 0) { - NewClkDllDelay = (UINT8) ABS (TechPtr->WLCriticalDelay); - - // Prepare new delay for MEMCLK - ClkDllFineDly = (UINT16) ((MemNGetBitFieldNb (NBPtr, BFPhyClkDllFine0) & 0x3F60) | NewClkDllDelay); - - // Program bit 7(FenceBit) = 1 if NewClkDllDelay >= > F2x9C[FenceThresholdTxPad], else 0. - ClkDllFineDly |= (NewClkDllDelay >= MemNGetBitFieldNb (NBPtr, BFPhyFence)) ? 0x80 : 0; - - // Apply new delay to both chiplets - MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine0, ClkDllFineDly | 0x4000); - MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine0, ClkDllFineDly); - MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine1, ClkDllFineDly | 0x4000); - MemNSetBitFieldNb (NBPtr, BFPhyClkDllFine1, ClkDllFineDly); - IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tShift MemClk, AddrCmd, CsOdt, Cke by %d to eliminate negative WL\n", NewClkDllDelay); - - // - // Adjust AddrCmd/CsOdt/Cke timing by amount MemClk was delayed - // - AddrCmdTmg = MemNGetBitFieldNb (NBPtr, BFAddrTmgControl); - AddrCmdTmg += (NewClkDllDelay << 16) | (NewClkDllDelay << 8) | NewClkDllDelay; - AddrCmdTmg &= 0x003F3F3F; - MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, AddrCmdTmg); - - // - // Adjust all WrDqsDlys on all DIMMs of the current channel - // - for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) { - if ((DCTPtr->Timings.CsEnabled & ((UINT16)3 << (Dimm << 1))) != 0) { - IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCS%d\n\t\t\tWrDqs:", Dimm << 1); - WrDqsDlysPtr = &(ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ())]); - for (ByteLane = 0; ByteLane < 8; ByteLane++) { - WrDqsDlysPtr[ByteLane] = (UINT8) (WrDqsDlysPtr[ByteLane] + NewClkDllDelay); - NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDlysPtr[ByteLane]); - IDS_HDT_CONSOLE (MEM_FLOW, " %02x", WrDqsDlysPtr[ByteLane]); - } - IDS_HDT_CONSOLE (MEM_FLOW, "\n"); - } - } - } - } - - return TRUE; -} -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function initializes RxEn Delays for RxEn seedless training - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNInitializeRxEnSeedlessTrainingUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - UINT8 ByteLane; - // Save original PRE based RxEnDly for RxEn Seedless training - for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) { - NBPtr->TechPtr->RxOrig[ByteLane] = NBPtr->ChannelPtr->RcvEnDlys[(NBPtr->TechPtr->ChipSel >> 1) * NBPtr->TechPtr->DlyTableWidth () + ByteLane]; - } - return TRUE; -} -/*----------------------------------------------------------------------------- - * - * - * This function checks each bytelane for no window error. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - MemTTrackRxEnSeedlessRdWrNoWindBLError (NBPtr->TechPtr, OptParam); - return TRUE; -} -/*----------------------------------------------------------------------------- - * - * - * This function checks each bytelane for small window error. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - MemTTrackRxEnSeedlessRdWrSmallWindBLError (NBPtr->TechPtr, OptParam); - return TRUE; -} -/*----------------------------------------------------------------------------- - * - * - * This function initializes a ByteLaneError error. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] OptParam - Optional parameter - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -BOOLEAN -MemNInitialzeRxEnSeedlessByteLaneErrorUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - UINT8 ByteLane; - for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) { - NBPtr->TechPtr->ByteLaneError[ByteLane] = FALSE; // All Bytelanes have no errors - } - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function sets phy power saving related settings in different MPstate context. - * - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * - * @return none - * ---------------------------------------------------------------------------- - */ -VOID -MemNPhyPowerSavingMPstateUnb ( - IN OUT MEM_NB_BLOCK *NBPtr - ) -{ - STATIC UINT8 Sequence[] = {8, 4, 3, 5, 2, 6, 1, 7, 0}; - UINT16 DllPower[9]; - UINT8 NumLanes; - UINT8 DllWakeTime; - UINT8 MaxRxStggrDly; - UINT8 MinRcvEnGrossDly; - UINT8 MinWrDatGrossDly; - UINT8 dRxStggrDly; - UINT8 dTxStggrDly; - UINT8 TempStggrDly; - UINT8 MaxTxStggrDly; - UINT8 Tcwl; - UINT8 i; - - IDS_HDT_CONSOLE (MEM_FLOW, "Start Phy power saving setting for memory Pstate %d\n", NBPtr->MemPstate); - // 4. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyU] = 1b. - // 5. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyL] = 1b. - // 6. D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0][RxDqsUDllPowerDown] = 1. - MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x83); - // 7. D18F2x9C_x0D0F_812F_dct[1:0][PARTri] = ~D18F2x90_dct[1:0][ParEn]. - // 8. D18F2x9C_x0D0F_812F_dct[1:0][Add17Tri, Add16Tri] = {1b, 1b} - if (NBPtr->MemPstate == MEMORY_PSTATE0) { - MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 0xA1); - } - // 9. IF (DimmsPopulated == 1) THEN - // program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 1 - // ELSE program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 0 ENDIF. - if (NBPtr->ChannelPtr->Dimms == 1) { - MemNSetBitFieldNb (NBPtr, BFLowPowerDrvStrengthEn, 0x100); - } - // 10. Program D18F2x9C_x0D0F_0[F,7:0][50,10]_dct[1:0][EnRxPadStandby] = IF - // (D18F2x94_dct[1:0][MemClkFreq] <= 800 MHz) THEN 1 ELSE 0 ENDIF. - MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) ? 0x1000 : 0); - // 11. Program D18F2x9C_x0000_000D_dct[1:0]_mp[1:0] as follows: - // If (DDR rate < = 1600) TxMaxDurDllNoLock = RxMaxDurDllNoLock = 8h - // else TxMaxDurDllNoLock = RxMaxDurDllNoLock = 7h. - if (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) { - MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 8); - MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 8); - } else { - MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 7); - MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 7); - } - // TxCPUpdPeriod = RxCPUpdPeriod = 000b. - MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 0); - MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 0); - // TxDLLWakeupTime = RxDLLWakeupTime = 11b. - MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 3); - MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 3); - // 12. Program D18F2x9C_x0D0F_0[F,7:0][5C,1C]_dct[1:0] as follows. - // Let Numlanes = 8. = 9 with ECC. - NumLanes = (NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8; - // RxDllStggrEn = TxDllStggrEn = 1. - for (i = 0; i < 9; i ++) { - DllPower[i] = 0x8080; - } - // If (DDR rate > = 1866) DllWakeTime = 1, Else DllWakeTime = 0. - DllWakeTime = (NBPtr->DCTPtr->Timings.Speed >= DDR1866_FREQUENCY) ? 1 : 0; - // Let MaxRxStggrDly = (Tcl*2) + MIN(DqsRcvEnGrossDelay for all byte lanes (see D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4. - MinRcvEnGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessRcvEnDly, FALSE); - ASSERT ((NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly) >= 4); - MaxRxStggrDly = NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly - 4; - // Let (real) dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (Numlanes - 1). - ASSERT (MaxRxStggrDly >= DllWakeTime); - dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (NumLanes - 1); - IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum RcvEnGrossDly: 0x%02x MaxRxStggrDly: 0x%02x dRxStggrDly: 0x%02x\n", MinRcvEnGrossDly, MaxRxStggrDly, dRxStggrDly); - // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program RxDllStggrDly[5:0] = an - // increasing value, starting with 0 for the first byte lane in the sequence and increasing at a rate of dRxStggrDly - // for each subsequent byte lane. Convert the real to integer by rounding down or using C (int) typecast after linearization. - i = 9 - NumLanes; - TempStggrDly = 0; - for (; i < 9; i ++) { - DllPower[Sequence[i]] |= ((TempStggrDly & 0x3F) << 8); - TempStggrDly = TempStggrDly + dRxStggrDly; - } - - // Let MaxTxStggrDly = (Tcwl*2) + MIN(MIN (WrDatGrossDly for all byte lanes (see - // D18F2x9C_x0000_0[3:0]0[2:1]_dct[1:0]_mp[1:0])), MIN(DqsRcvEnGrossDelay for all byte lanes (see - // D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4. - Tcwl = (UINT8) MemNGetBitFieldNb (NBPtr, BFTcwl); - MinWrDatGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessWrDatDly, FALSE); - MaxTxStggrDly = Tcwl * 2 + MIN (MinRcvEnGrossDly, MinWrDatGrossDly) - 4; - // Let dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (Numlanes - 1). - ASSERT (MaxTxStggrDly >= DllWakeTime); - dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (NumLanes - 1); - // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program TxDllStggrDly[5:0] = an - // increasing integer value, starting with 0 for the first byte lane in the sequence and increasing at a rate of - // dTxStggrDly for each subsequent byte lane. - IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum WrDatGrossDly: 0x%02x MaxTxStggrDly: 0x%02x dTxStggrDly: 0x%02x\n", MinWrDatGrossDly, MaxTxStggrDly, dTxStggrDly); - i = 9 - NumLanes; - TempStggrDly = 0; - for (; i < 9; i ++) { - DllPower[Sequence[i]] |= (TempStggrDly & 0x3F); - TempStggrDly = TempStggrDly + dTxStggrDly; - } - - IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tByte Lane : ECC 07 06 05 04 03 02 01 00\n"); - IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tDll Power : %04x %04x %04x %04x %04x %04x %04x %04x %04x\n", - DllPower[8], DllPower[7], DllPower[6], DllPower[5], DllPower[4], DllPower[3], DllPower[2], DllPower[1], DllPower[0]); - - for (i = 0; i < NumLanes; i ++) { - MemNSetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i, ((MemNGetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i) & 0x4040) | DllPower[i])); - } - // 13. Program D18F2x248_dct[1:0]_mp[1:0] and then D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0] as follows: - // For M1 context program RxChMntClkEn=RxSsbMntClkEn=0. - // For M0 context program RxChMntClkEn=RxSsbMntClkEn=1. - if (NBPtr->MemPstate == MEMORY_PSTATE1) { - MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 0); - MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0); - } else { - MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 1); - MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0x100); - } - - IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &NBPtr->MemPtr->StdHeader); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function resets RxFifo pointer during Read DQS training - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in,out] *OptParam - Optional parameter - * - * @return TRUE - */ - -BOOLEAN -MemNResetRxFifoPtrClientNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT VOID *OptParam - ) -{ - if (NBPtr->TechPtr->Direction == DQS_READ_DIR) { - MemNSetBitFieldNb (NBPtr, BFRxPtrInitReq, 1); - MemNPollBitFieldNb (NBPtr, BFRxPtrInitReq, 0, PCI_ACCESS_TIMEOUT, FALSE); - } - return TRUE; -} - |