diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c')
-rwxr-xr-x | src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c | 1353 |
1 files changed, 1353 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c new file mode 100755 index 0000000000..89ba983d09 --- /dev/null +++ b/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c @@ -0,0 +1,1353 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mnS3.c + * + * Common Northbridge S3 + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/NB) + * @e \$Revision: 51670 $ @e \$Date: 2011-04-27 03:26:02 +0800 (Wed, 27 Apr 2011) $ + * + **/ +/***************************************************************************** +* +* Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* *************************************************************************** +* +*/ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + +#include "AGESA.h" +#include "AdvancedApi.h" +#include "amdlib.h" +#include "Ids.h" +#include "OptionMemory.h" +#include "mm.h" +#include "mn.h" +#include "S3.h" +#include "mfs3.h" +#include "cpuFamilyTranslation.h" +#include "heapManager.h" +#include "Filecode.h" +CODE_GROUP (G3_DXE) +RDATA_GROUP (G3_DXE) + +#define FILECODE PROC_MEM_NB_MNS3_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +VOID +STATIC +MemNS3GetSetBitField ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN BOOLEAN IsSet, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ); + +BOOLEAN +STATIC +MemNS3GetDummyReadAddr ( + IN OUT MEM_NB_BLOCK *NBPtr, + OUT UINT64 *TestAddr + ); +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function executes the S3 resume for a node + * + * @param[in,out] *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK + * @param[in] NodeID - The Node id of the target die + * + * @return BOOLEAN + * TRUE - This is the correct constructor for the targeted node. + * FALSE - This isn't the correct constructor for the targeted node. + */ + +BOOLEAN +MemNS3ResumeNb ( + IN OUT S3_MEM_NB_BLOCK *S3NBPtr, + IN UINT8 NodeID + ) +{ + UINT8 DCT; + BOOLEAN GangedEn; + UINT64 TestAddr; + MEM_NB_BLOCK *NBPtr; + MEM_DATA_STRUCT *MemPtr; + + NBPtr = S3NBPtr->NBPtr; + MemPtr = NBPtr->MemPtr; + GangedEn = (MemNGetBitFieldNb (NBPtr, BFDctGangEn) == 1) ? TRUE : FALSE; + + // Errata before S3 resume sequence + + // Resume Sequence + // 1. Program F2x[1,0]9C_x08[DisAutoComp]=1 + MemNSwitchDCTNb (NBPtr, 0); + MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1); + + // Program F2x[1, 0]94[MemClkFreqVal] = 1. + // 2. Wait for F2x[1,0]94[FreqChgInPrg]=0 + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + MemNSwitchDCTNb (NBPtr, DCT); + if ((MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) && !((DCT == 1) && GangedEn)) { + MemNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1); + while (MemNGetBitFieldNb (NBPtr, BFFreqChgInProg) != 0) {} + } + } + + // Program F2x9C_x08[DisAutoComp]=0 + MemNSwitchDCTNb (NBPtr, 0); + MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 0); + // BIOS must wait 750 us for the phy compensation engine + // to reinitialize. + MemFS3Wait10ns (75000, NBPtr->MemPtr); + + // 3. Restore F2x[1,0]90_x00, F2x9C_x0A, and F2x[1,0]9C_x0C + // 4. Restore F2x[1,0]9C_x04 + // Get the register value from the heap. + S3NBPtr->MemS3ExitSelfRefReg (NBPtr, &MemPtr->StdHeader); + + // Add a hook here + AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); + if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) { + } + AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); + + // 5. Set F2x[1,0]90[ExitSelfRef] + // 6. Wait for F2x[1,0]90[ExitSelfRef]=0 + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + MemNSwitchDCTNb (NBPtr, DCT); + if ((MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) && !((DCT == 1) && GangedEn)) { + MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1); + while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {} + } + if ((MemNGetBitFieldNb (NBPtr, BFMemClkFreq) == DDR1333_FREQUENCY) && (NBPtr->IsSupported[CheckDllSpeedUp])) { + MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F11, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F11) | 0x2000)); + MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F10, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F10) | 0x2000)); + MemNSetBitFieldNb (NBPtr, BFPhy0x0D088F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D088F30) | 0x2000)); + MemNSetBitFieldNb (NBPtr, BFPhy0x0D08C030, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D08C030) | 0x2000)); + if (DCT == 0) { + MemNSetBitFieldNb (NBPtr, BFPhy0x0D082F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D082F30) | 0x2000)); + } + // NOTE: wait 512 clocks for DLL-relock + MemFS3Wait10ns (50000, NBPtr->MemPtr); // wait 500us + } + } + + // Errata After S3 resume sequence + // Errata 350 + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + MemNSwitchDCTNb (NBPtr, DCT); + if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) { + if (!((DCT == 1) && GangedEn)) { + if (MemNS3GetDummyReadAddr (NBPtr, &TestAddr)) { + // Do dummy read + Read64Mem8 (TestAddr); + // Flush the cache line + LibAmdCLFlush (TestAddr, 1); + } + } + MemNSetBitFieldNb (NBPtr, BFErr350, 0x8000); + MemFS3Wait10ns (60, NBPtr->MemPtr); // Wait 300ns + MemNSetBitFieldNb (NBPtr, BFErr350, 0x0000); + MemFS3Wait10ns (400, NBPtr->MemPtr); // Wait 2us + } + } + + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function executes the S3 resume for a node on a client NB + * + * @param[in,out] *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK + * @param[in] NodeID - The Node id of the target die + * + * @return BOOLEAN + * TRUE - This is the correct constructor for the targeted node. + * FALSE - This isn't the correct constructor for the targeted node. + */ +BOOLEAN +MemNS3ResumeClientNb ( + IN OUT S3_MEM_NB_BLOCK *S3NBPtr, + IN UINT8 NodeID + ) +{ + UINT8 DCT; + MEM_NB_BLOCK *NBPtr; + MEM_DATA_STRUCT *MemPtr; + + NBPtr = S3NBPtr->NBPtr; + MemPtr = NBPtr->MemPtr; + + // Errata before S3 resume sequence + + // Add a hook here + AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); + if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) { + } + AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); + + NBPtr->ChangeNbFrequencyWrap (NBPtr, 0); + //Override the NB Pstate if needed + IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, S3NBPtr->NBPtr, &MemPtr->StdHeader); + // Set F2x[1,0]90[ExitSelfRef] + // Wait for F2x[1,0]90[ExitSelfRef]=0 + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + MemNSwitchDCTNb (NBPtr, DCT); + if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) { + MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1); + MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1); + while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {} + MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0); + } + } + + // Errata After S3 resume sequence + return TRUE; +} +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function executes the S3 resume for a node on a UNB + * + * @param[in,out] *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK + * @param[in] NodeID - The Node id of the target die + * + * @return BOOLEAN + * TRUE - This is the correct constructor for the targeted node. + * FALSE - This isn't the correct constructor for the targeted node. + */ +BOOLEAN +MemNS3ResumeUNb ( + IN OUT S3_MEM_NB_BLOCK *S3NBPtr, + IN UINT8 NodeID + ) +{ + UINT8 DCT; + MEM_NB_BLOCK *NBPtr; + MEM_DATA_STRUCT *MemPtr; + + NBPtr = S3NBPtr->NBPtr; + MemPtr = NBPtr->MemPtr; + + // Errata before S3 resume sequence + + // Add a hook here + AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); + if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) { + } + AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); + + //Override the NB Pstate if needed + IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, S3NBPtr->NBPtr, &MemPtr->StdHeader); + // Set F2x[1,0]90[ExitSelfRef] + // Wait for F2x[1,0]90[ExitSelfRef]=0 + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + MemNSwitchDCTNb (NBPtr, DCT); + if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) { + MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1); + MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1); + while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {} + MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0); + } + } + + // Errata After S3 resume sequence + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function returns the conditional PCI device mask + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in, out] *DescriptPtr - Pointer to DESCRIPTOR_GROUP + * @return none + */ +VOID +MemNS3GetConPCIMaskNb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT DESCRIPTOR_GROUP *DescriptPtr + ) +{ + BIT_FIELD_NAME bitfield; + UINT32 RegVal; + UINT8 DCT; + UINT8 DimmMask; + UINT8 BadDimmMask; + UINT8 DctGangEn; + BOOLEAN IsDDR3; + + IsDDR3 = FALSE; + DimmMask = 0; + BadDimmMask = 0; + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + NBPtr->SwitchDCT (NBPtr, DCT); + if (MemNGetBitFieldNb (NBPtr, BFMemClkFreqVal)) { + if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 1) { + IsDDR3 = TRUE; + } + for (bitfield = BFCSBaseAddr0Reg; bitfield <= BFCSBaseAddr7Reg; bitfield ++) { + RegVal = MemNGetBitFieldNb (NBPtr, bitfield); + if (RegVal & 0x3) { + DimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); + } else if (RegVal & 0x4) { + BadDimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); + } + } + } + } + + NBPtr->SwitchDCT (NBPtr, 0); + DctGangEn = (UINT8) MemNGetBitFieldNb (NBPtr, BFDctGangEn); + // Set channel mask + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = 0; + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = 0; + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + if (DimmMask & (0x55 << DCT)) { + // Set mask before exit self refresh + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT; + // Set mask after exit self refresh + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 1 << DCT; + // Set DDR3 mask if Dimms present are DDR3 + if (IsDDR3) { + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 << 4); + } + } else if (BadDimmMask & (0x55 << DCT)) { + // Need to save function 2 registers for bad dimm + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT; + } + } + + // Set dimm mask + DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = DimmMask; + DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = DimmMask; + if (DctGangEn) { + // Need to set channel mask bit to 1 on DCT1 in ganged mode as some registers + // need to be restored on both channels in ganged mode + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 2; + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 2; + if (IsDDR3) { + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= (2 << 4); + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (2 << 4); + } + // Before exit self refresh, do not copy dimm mask to DCT1 as registers restored + // in that time frame don't care about individual dimm population. We want to + // skip registers that are not needed to be restored for DCT1 in ganged mode. + // + // After exit self refresh, training registers will be restored and will only be + // restored for slots which have dimms on it. So dimm mask needs to be copied to DCT1. + // + DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 |= DimmMask << 1; + } + + // Adjust the mask if there is no dimm on the node + if ((DescriptPtr->CPCIDevice[PRESELFREF].Mask2 == 0) && + (DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 == 0)) { + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function returns the conditional PCI device mask + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in, out] *DescriptPtr - Pointer to DESCRIPTOR_GROUP + * @return none + */ +VOID +MemNS3GetConPCIMaskUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT DESCRIPTOR_GROUP *DescriptPtr + ) +{ + BIT_FIELD_NAME bitfield; + UINT32 RegVal; + UINT8 DCT; + UINT8 DimmMask; + UINT8 BadDimmMask; + UINT8 NbPsCap; + + DimmMask = 0; + BadDimmMask = 0; + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + MemNSwitchDCTNb (NBPtr, DCT); + if (MemNGetBitFieldNb (NBPtr, BFMemClkFreqVal)) { + for (bitfield = BFCSBaseAddr0Reg; bitfield <= BFCSBaseAddr7Reg; bitfield ++) { + RegVal = MemNGetBitFieldNb (NBPtr, bitfield); + if (RegVal & 0x1) { + DimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); + } else if (RegVal & 0x4) { + BadDimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); + } + } + } + } + // Check if the system is capable of doing NB Pstate change + NbPsCap = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPstateDis); + + MemNSwitchDCTNb (NBPtr, 0); + // Set channel mask + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = 0; + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = 0; + for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { + if (DimmMask & (0x55 << DCT)) { + // Set mask before exit self refresh + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= ((NbPsCap == 0) ? 5 : 1) << DCT; + // Set mask after exit self refresh + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 1 << DCT; + // Set DDR3 mask if Dimms present are DDR3 + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 << 4); + } else if (BadDimmMask & (0x55 << DCT)) { + // Need to save function 2 registers for bad dimm + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT; + } + } + + // Set dimm mask + DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = DimmMask; + DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = DimmMask; + + // Adjust the mask if there is no dimm on the node + if ((DescriptPtr->CPCIDevice[PRESELFREF].Mask2 == 0) && + (DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 == 0)) { + DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; + DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function read the value of CSR register. + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the CSR register in PCI_ADDR format. + * @param[in] *Value - Pointer to the value be read. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3GetCSRNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT32 ExtendOffset; + UINT32 ValueRead; + UINT8 DataPort; + + ValueRead = 0; + ExtendOffset = Address.Address.Register; + if (ExtendOffset & 0x800) { + Address.Address.Register = 0xF0; + DataPort = 0xF4; + } else { + Address.Address.Register = 0x98; + DataPort = 0x9C; + } + if (ExtendOffset & 0x400) { + Address.Address.Register |= 0x100; + } + ExtendOffset &= 0x3FF; + LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr); + while (((ValueRead >> 31) & 1) == 0) { + LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr); + } + Address.Address.Register = (Address.Address.Register & 0xF00) | DataPort; + LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr); +} + + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function write to a CSR register + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the CSR register in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value be read. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetCSRNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT32 ExtendOffset; + UINT32 ValueRead; + UINT32 ValueWrite; + UINT8 DataOffset; + + ValueRead = 0; + ExtendOffset = Address.Address.Register; + // Check the flag and see the type of the access + if (ExtendOffset & 0x800) { + Address.Address.Register = 0xF4; + DataOffset = 0xF0; + } else { + Address.Address.Register = 0x9C; + DataOffset = 0x98; + } + if (ExtendOffset & 0x400) { + Address.Address.Register |= 0x100; + } + ExtendOffset &= 0x3FF; + ExtendOffset |= 0x40000000; + switch (AccessWidth) { + case AccessS3SaveWidth8: + ValueWrite = *(UINT8 *) Value; + break; + case AccessS3SaveWidth16: + ValueWrite = *(UINT16 *) Value; + break; + case AccessS3SaveWidth32: + ValueWrite = *(UINT32 *) Value; + break; + default: + ASSERT (FALSE); + } + LibAmdPciWrite (AccessS3SaveWidth32, Address, &ValueWrite, ConfigPtr); + Address.Address.Register = (Address.Address.Register & 0xF00) | DataOffset; + LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr); + while (((ValueRead >> 31) & 1) == 0) { + LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function reads register bitfield + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the CSR register in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value be read. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3GetBitFieldNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + MemNS3GetSetBitField (AccessWidth, Address, FALSE, Value, ConfigPtr); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function writes register bitfield + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the CSR register in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetBitFieldNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + MemNS3GetSetBitField (AccessWidth, Address, TRUE, Value, ConfigPtr); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function restores scrubber base register + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] Node - The Node id of the target die + * + */ +VOID +MemNS3RestoreScrubNb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 Node + ) +{ + UINT32 ScrubAddrRJ16; + + ScrubAddrRJ16 = (MemNGetBitFieldNb (NBPtr, BFDramBaseReg0 + Node) & 0xFFFF0000) >> 8; + ScrubAddrRJ16 |= MemNGetBitFieldNb (NBPtr, BFDramBaseHiReg0 + Node) << 24; + MemNSetBitFieldNb (NBPtr, BFScrubAddrLoReg, ScrubAddrRJ16 << 16); + MemNSetBitFieldNb (NBPtr, BFScrubAddrHiReg, ScrubAddrRJ16 >> 16); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function disable NB Pstate Debug. + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3DisNbPsDbgNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT32 RegValue; + + LibAmdPciRead (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); + // Clear NbPsDbgEn and NbPsCsrAccSel + if ((RegValue & 0xC0000000) != 0) { + RegValue &= 0x3FFFFFFF; + LibAmdPciWrite (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function that enable NB Pstate debug register to allow access to NB Pstate + * 1 registers without actually changing NB Pstate. + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3EnNbPsDbg1Nb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT32 RegValue; + + LibAmdPciRead (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); + // Set NbPsDbgEn to 1 and NbPsCsrAccSel to 1 + if ((RegValue & 0xC0000000) != 0xC0000000) { + RegValue = (*(UINT32 *)Value & 0x3FFFFFFF) | 0xC0000000; + LibAmdPciWrite (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function sets bit 31 [DynModeChange] of F2x9C_xB + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetDynModeChangeNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT32 RegValue; + + RegValue = 0x80000000; + IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) { + MemNS3SetCSRNb (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function does the channel disable sequence + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3DisableChannelNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + MEM_NB_BLOCK *NBPtr; + LOCATE_HEAP_PTR LocateBufferPtr; + S3_MEM_NB_BLOCK *S3NBPtr; + UINT32 RegValue; + UINT8 Die; + + // See which Node should be accessed + Die = (UINT8) (Address.Address.Device - 24); + + LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE; + if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) { + S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr; + NBPtr = S3NBPtr[Die].NBPtr; + + // Function field contains the DCT number + NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function); + RegValue = MemNGetBitFieldNb (NBPtr, BFCKETri); + // if CKETri is 0b11, this channel is disabled + if (RegValue == 3) { + //Wait for 24 MEMCLKs, which is 60ns under 400MHz + MemFS3Wait10ns (6, NBPtr->MemPtr); + MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF); + MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1); + MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x80800000); + } + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function disables auto compensation. + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetDisAutoCompUnb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT16 RegValue; + + MemNS3GetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); + RegValue = 0x6000 | RegValue; + MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function retores Pre Driver Calibration with pre driver calibration code + * code valid bit set. + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetPreDriverCalUnb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT16 RegValue; + + RegValue = 0x8000 | *(UINT16 *) Value; + MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function is used by families that use a separate DctCfgSel bit to + * select the current DCT which will be accessed by function 2. + * NOTE: This function must be called BEFORE the NBPtr->Dct variable is + * updated. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] *Dct - Pointer to ID of the target DCT + * + */ + +BOOLEAN +MemNS3DctCfgSelectUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN VOID *Dct + ) +{ + // Set the DctCfgSel to new DCT + // + MemNSetBitFieldNb (NBPtr, BFDctCfgSel, *(UINT8*)Dct); + + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function write to a register that has one copy for each NB Pstate + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the CSR register in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value be read. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3GetNBPStateDepRegUnb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT8 NBPstate; + UINT8 TempValue; + UINT8 Dct; + UINT32 Temp; + + Temp = Address.Address.Register; + NBPstate = (UINT8) (Temp >> 10); + Dct = (UINT8) Address.Address.Function; + Temp &= 0x3FF; + + // Switch Dct + // Function field contains DCT value + Address.Address.Function = FUNC_1; + Address.Address.Register = 0x10C; + LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + TempValue = (TempValue & 0xCE) | ((NBPstate << 4) | Dct); + LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + + Address.Address.Function = FUNC_2; + Address.Address.Register = Temp; + LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr); + + Address.Address.Function = FUNC_1; + Address.Address.Register = 0x10C; + TempValue = 0; + LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function write to a register that has one copy for each NB Pstate + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the CSR register in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value be read. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetNBPStateDepRegUnb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT8 NBPstate; + UINT8 TempValue; + UINT8 Dct; + UINT32 Temp; + + Temp = Address.Address.Register; + NBPstate = (UINT8) (Temp >> 10); + Dct = (UINT8) Address.Address.Function; + Temp &= 0x3FF; + + // Switch Dct + // Function field contains DCT value + Address.Address.Function = FUNC_1; + Address.Address.Register = 0x10C; + LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + TempValue = (TempValue & 0xCE) | ((NBPstate << 4) | Dct); + LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + + Address.Address.Function = FUNC_2; + Address.Address.Register = Temp; + LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr); + + Address.Address.Function = FUNC_1; + Address.Address.Register = 0x10C; + TempValue = 0; + LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function read the value of Function 2 PCI register. + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the NB register in PCI_ADDR format. + * @param[in] *Value - Pointer to the value be read. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SaveNBRegiserUnb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT8 TempValue; + UINT8 Dct; + UINT32 Temp; + + Temp = Address.Address.Register; + Dct = (UINT8) Address.Address.Function; + + // Switch Dct + // Function field contains DCT value + Address.Address.Function = FUNC_1; + Address.Address.Register = 0x10C; + LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + TempValue = (TempValue & 0xFE) | Dct; + LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + + Address.Address.Register = Temp; + Address.Address.Function = FUNC_2; + LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function set the value of Function 2 PCI register. + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the NB register in PCI_ADDR format. + * @param[in] *Value - Pointer to the value be write. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3RestoreNBRegiserUnb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT8 TempValue; + UINT8 Dct; + UINT32 Temp; + + Temp = Address.Address.Register; + Dct = (UINT8) Address.Address.Function; + + // Switch Dct + // Function field contains DCT value + Address.Address.Function = FUNC_1; + Address.Address.Register = 0x10C; + LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + TempValue = (TempValue & 0xFE) | Dct; + LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); + + Address.Address.Register = Temp; + Address.Address.Function = FUNC_2; + LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr); +} + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *----------------------------------------------------------------------------*/ + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function reads and writes register bitfield + * + * @param[in] AccessWidth - Access width of the register + * @param[in] Address - address of the CSR register in PCI_ADDR format. + * @param[in] IsSet - if this is a register read or write + * @param[in, out] *Value - Pointer to the value be read or written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +STATIC +MemNS3GetSetBitField ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN BOOLEAN IsSet, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + BIT_FIELD_NAME BitField; + MEM_NB_BLOCK *NBPtr; + LOCATE_HEAP_PTR LocateBufferPtr; + S3_MEM_NB_BLOCK *S3NBPtr; + UINT32 RegValue; + UINT8 Die; + + RegValue = 0; + // See which Node should be accessed + Die = (UINT8) (Address.Address.Device - 24); + + LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE; + if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) { + S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr; + NBPtr = S3NBPtr[Die].NBPtr; + + // Function field contains the DCT number + NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function); + + // Get the bitfield name to be accessed + // Register field contains the bitfield name + BitField = (BIT_FIELD_NAME) Address.Address.Register; + + if (IsSet) { + switch (AccessWidth) { + case AccessS3SaveWidth8: + RegValue = *(UINT8 *) Value; + break; + case AccessS3SaveWidth16: + RegValue = *(UINT16 *) Value; + break; + case AccessS3SaveWidth32: + RegValue = *(UINT32 *) Value; + break; + default: + ASSERT (FALSE); + } + MemNSetBitFieldNb (NBPtr, BitField, RegValue); + } else { + RegValue = MemNGetBitFieldNb (NBPtr, BitField); + + switch (AccessWidth) { + case AccessS3SaveWidth8: + *(UINT8 *) Value = (UINT8) RegValue; + break; + case AccessS3SaveWidth16: + *(UINT16 *) Value = (UINT16) RegValue; + break; + case AccessS3SaveWidth32: + *(UINT32 *) Value = RegValue; + break; + default: + ASSERT (FALSE); + } + } + } else { + ASSERT (FALSE); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function gets the dummy read address for a channel of a node. + * + * @param[in, out] *NBPtr - Pointer to northbridge block + * @param[out] *TestAddr - Pointer to the test address + * + * @retval TRUE - Dummy read address can be found + * @retval FALSE - Dummy read address cannot be found + * + */ +BOOLEAN +STATIC +MemNS3GetDummyReadAddr ( + IN OUT MEM_NB_BLOCK *NBPtr, + OUT UINT64 *TestAddr + ) +{ + BOOLEAN DctSelIntlvEn; + UINT8 DramIntlvEn; + UINT8 DctSelIntlvAddr; + UINT8 IntLvRgnBaseAddr; + UINT8 IntLvRgnLmtAddr; + UINT8 IntLvRgnSize; + UINT32 DctSelBaseAddr; + UINT64 TOM; + BOOLEAN AddrFound; + + AddrFound = TRUE; + // Check if Node interleaving is enabled + DramIntlvEn = (UINT8) MemNGetBitFieldNb (NBPtr, BFDramIntlvEn); + if (DramIntlvEn != 0) { + // Set the address bits that identify the node + *TestAddr = (UINT64) MemNGetBitFieldNb (NBPtr, BFDramIntlvSel) << 12; + } else { + *TestAddr = (UINT64) MemNGetBitFieldNb (NBPtr, BFDramBaseAddr) << 27; + } + + // Check if channel interleaving is enabled + DctSelIntlvEn = (BOOLEAN) MemNGetBitFieldNb (NBPtr, BFDctSelIntLvEn); + DctSelBaseAddr = MemNGetBitFieldNb (NBPtr, BFDctSelBaseAddr); + if (!DctSelIntlvEn) { + if ((NBPtr->Dct == 1) && ((UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelHi) == 1)) { + *TestAddr = ((UINT64) DctSelBaseAddr << 27) | (*TestAddr & 0xFFFFFFF); + } + } else { + DctSelIntlvAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelIntLvAddr); + // Set the address bits that identify the channel + if ((DctSelIntlvAddr == 0) || (DctSelIntlvAddr == 2)) { + *TestAddr |= (UINT64) NBPtr->Dct << 6; + } else if (DctSelIntlvAddr == 1) { + *TestAddr |= (UINT64) NBPtr->Dct << (12 + LibAmdBitScanReverse (DramIntlvEn + 1)); + } else if (DctSelIntlvAddr == 3) { + *TestAddr |= (UINT64) NBPtr->Dct << 9; + } + } + // Adding 2M to avoid conflict + *TestAddr += 0x200000; + + // If memory hoisting is disabled, the address can fall into MMIO area + // Need to find an address out of MMIO area but belongs to the channel + // If the whole channel is in MMIO, then do not do dummy read. + // + LibAmdMsrRead (TOP_MEM, &TOM, &NBPtr->MemPtr->StdHeader); + if ((*TestAddr >= TOM) && (*TestAddr < ((UINT64) _4GB_RJ16 << 16))) { + if ((NBPtr->Dct == 1) && ((UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelHi) == 1)) { + // This is the DCT that goes to high address range + if (DctSelBaseAddr >= (_4GB_RJ16 >> (27 - 16))) { + // When DctSelBaseAddr is higher than 4G, choose DctSelBaseAddr as the dummy read addr + if (DctSelIntlvEn) { + *TestAddr = ((UINT64) DctSelBaseAddr << 27) | (*TestAddr & 0xFFFFFFF); + } + } else if (MemNGetBitFieldNb (NBPtr, BFDramLimitAddr) > (UINT32) (_4GB_RJ16 >> (27 - 16))) { + // if DctSelBase is smaller than 4G, but Dram limit is larger than 4G, then choose 4G as + // dummy read address + *TestAddr = ((UINT64) _4GB_RJ16 << 16) | (*TestAddr & 0xFFFFFF); + } else { + AddrFound = FALSE; + } + } else { + // This is the DCT that only goes to low address range + if (DctSelBaseAddr > (_4GB_RJ16 >> (27 - 16))) { + // When DctSelBaseAddr is larger than 4G, choose 4G as the dummy read address + // Keep the lower bits for node and channel selection + *TestAddr = ((UINT64) _4GB_RJ16 << 16) | (*TestAddr & 0xFFFFFF); + } else { + AddrFound = FALSE; + } + } + } + + // Interleaved Swap Region handling + if ((BOOLEAN) MemNGetBitFieldNb (NBPtr, BFIntLvRgnSwapEn)) { + IntLvRgnBaseAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnBaseAddr); + IntLvRgnLmtAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnLmtAddr); + IntLvRgnSize = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnSize); + ASSERT (IntLvRgnSize == (IntLvRgnLmtAddr - IntLvRgnBaseAddr + 1)); + if (((*TestAddr >> 34) == 0) && + ((((*TestAddr >> 27) >= IntLvRgnBaseAddr) && ((*TestAddr >> 27) <= IntLvRgnLmtAddr)) + || ((*TestAddr >> 27) < IntLvRgnSize))) { + *TestAddr ^= (UINT64) IntLvRgnBaseAddr << 27; + } + } + + return AddrFound; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function sets bit 7 [MemClkFreqVal] of F2x94_dct[1:0] + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetMemClkFreqValUnb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT32 TempValue; + + // 1. Program F2x94_dct[1:0][MemClkFreqVal] = 1 + MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); + TempValue |= 0x80; + MemNS3RestoreNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); + + // 2. Wait for F2x94_dct[1:0][FreqChgInPrg] = 0 + MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); + while ((TempValue & 0x200000) != 0) { + MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function changes memory Pstate context + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. Target MemPState is in + * Address.Address.Register. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + * + * @return TRUE + * ---------------------------------------------------------------------------- + */ +VOID +MemNS3ChangeMemPStateContextNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + MEM_NB_BLOCK *NBPtr; + LOCATE_HEAP_PTR LocateBufferPtr; + S3_MEM_NB_BLOCK *S3NBPtr; + UINT8 Die; + + // See which Node should be accessed + Die = (UINT8) (Address.Address.Device - 24); + + LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE; + if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) { + S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr; + NBPtr = S3NBPtr[Die].NBPtr; + MemNChangeMemPStateContextNb (NBPtr, Address.Address.Register); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function retores Phy Clk DLL fine delay + * + * @param[in] AccessWidth - Access width of the register. + * @param[in] Address - address in PCI_ADDR format. + * @param[in, out] *Value - Pointer to the value to be written. + * @param[in, out] *ConfigPtr - Pointer to Config handle. + * @return none + */ +VOID +MemNS3SetPhyClkDllFineClientNb ( + IN ACCESS_WIDTH AccessWidth, + IN PCI_ADDR Address, + IN OUT VOID *Value, + IN OUT VOID *ConfigPtr + ) +{ + UINT16 RegValue; + + RegValue = 0x4000 | *(UINT16 *) Value; + MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); + RegValue = 0xBFFF & *(UINT16 *) Value; + MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); +} |