diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c')
| -rw-r--r-- | src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c | 1353 |
1 files changed, 0 insertions, 1353 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c deleted file mode 100644 index a2f68f9811..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/mnS3.c +++ /dev/null @@ -1,1353 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mnS3.c - * - * Common Northbridge S3 - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/NB) - * @e \$Revision: 51670 $ @e \$Date: 2011-04-27 03:26:02 +0800 (Wed, 27 Apr 2011) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - -#include "AGESA.h" -#include "AdvancedApi.h" -#include "amdlib.h" -#include "Ids.h" -#include "OptionMemory.h" -#include "mm.h" -#include "mn.h" -#include "S3.h" -#include "mfs3.h" -#include "cpuFamilyTranslation.h" -#include "heapManager.h" -#include "Filecode.h" -CODE_GROUP (G3_DXE) -RDATA_GROUP (G3_DXE) - -#define FILECODE PROC_MEM_NB_MNS3_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ -VOID -STATIC -MemNS3GetSetBitField ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN BOOLEAN IsSet, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ); - -BOOLEAN -STATIC -MemNS3GetDummyReadAddr ( - IN OUT MEM_NB_BLOCK *NBPtr, - OUT UINT64 *TestAddr - ); -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function executes the S3 resume for a node - * - * @param[in,out] *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK - * @param[in] NodeID - The Node id of the target die - * - * @return BOOLEAN - * TRUE - This is the correct constructor for the targeted node. - * FALSE - This isn't the correct constructor for the targeted node. - */ - -BOOLEAN -MemNS3ResumeNb ( - IN OUT S3_MEM_NB_BLOCK *S3NBPtr, - IN UINT8 NodeID - ) -{ - UINT8 DCT; - BOOLEAN GangedEn; - UINT64 TestAddr; - MEM_NB_BLOCK *NBPtr; - MEM_DATA_STRUCT *MemPtr; - - NBPtr = S3NBPtr->NBPtr; - MemPtr = NBPtr->MemPtr; - GangedEn = (MemNGetBitFieldNb (NBPtr, BFDctGangEn) == 1) ? TRUE : FALSE; - - // Errata before S3 resume sequence - - // Resume Sequence - // 1. Program F2x[1,0]9C_x08[DisAutoComp]=1 - MemNSwitchDCTNb (NBPtr, 0); - MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 1); - - // Program F2x[1, 0]94[MemClkFreqVal] = 1. - // 2. Wait for F2x[1,0]94[FreqChgInPrg]=0 - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - MemNSwitchDCTNb (NBPtr, DCT); - if ((MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) && !((DCT == 1) && GangedEn)) { - MemNSetBitFieldNb (NBPtr, BFMemClkFreqVal, 1); - while (MemNGetBitFieldNb (NBPtr, BFFreqChgInProg) != 0) {} - } - } - - // Program F2x9C_x08[DisAutoComp]=0 - MemNSwitchDCTNb (NBPtr, 0); - MemNSetBitFieldNb (NBPtr, BFDisAutoComp, 0); - // BIOS must wait 750 us for the phy compensation engine - // to reinitialize. - MemFS3Wait10ns (75000, NBPtr->MemPtr); - - // 3. Restore F2x[1,0]90_x00, F2x9C_x0A, and F2x[1,0]9C_x0C - // 4. Restore F2x[1,0]9C_x04 - // Get the register value from the heap. - S3NBPtr->MemS3ExitSelfRefReg (NBPtr, &MemPtr->StdHeader); - - // Add a hook here - AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); - if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) { - } - AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); - - // 5. Set F2x[1,0]90[ExitSelfRef] - // 6. Wait for F2x[1,0]90[ExitSelfRef]=0 - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - MemNSwitchDCTNb (NBPtr, DCT); - if ((MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) && !((DCT == 1) && GangedEn)) { - MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1); - while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {} - } - if ((MemNGetBitFieldNb (NBPtr, BFMemClkFreq) == DDR1333_FREQUENCY) && (NBPtr->IsSupported[CheckDllSpeedUp])) { - MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F11, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F11) | 0x2000)); - MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F10, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D080F10) | 0x2000)); - MemNSetBitFieldNb (NBPtr, BFPhy0x0D088F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D088F30) | 0x2000)); - MemNSetBitFieldNb (NBPtr, BFPhy0x0D08C030, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D08C030) | 0x2000)); - if (DCT == 0) { - MemNSetBitFieldNb (NBPtr, BFPhy0x0D082F30, (MemNGetBitFieldNb (NBPtr, BFPhy0x0D082F30) | 0x2000)); - } - // NOTE: wait 512 clocks for DLL-relock - MemFS3Wait10ns (50000, NBPtr->MemPtr); // wait 500us - } - } - - // Errata After S3 resume sequence - // Errata 350 - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - MemNSwitchDCTNb (NBPtr, DCT); - if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) { - if (!((DCT == 1) && GangedEn)) { - if (MemNS3GetDummyReadAddr (NBPtr, &TestAddr)) { - // Do dummy read - Read64Mem8 (TestAddr); - // Flush the cache line - LibAmdCLFlush (TestAddr, 1); - } - } - MemNSetBitFieldNb (NBPtr, BFErr350, 0x8000); - MemFS3Wait10ns (60, NBPtr->MemPtr); // Wait 300ns - MemNSetBitFieldNb (NBPtr, BFErr350, 0x0000); - MemFS3Wait10ns (400, NBPtr->MemPtr); // Wait 2us - } - } - - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function executes the S3 resume for a node on a client NB - * - * @param[in,out] *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK - * @param[in] NodeID - The Node id of the target die - * - * @return BOOLEAN - * TRUE - This is the correct constructor for the targeted node. - * FALSE - This isn't the correct constructor for the targeted node. - */ -BOOLEAN -MemNS3ResumeClientNb ( - IN OUT S3_MEM_NB_BLOCK *S3NBPtr, - IN UINT8 NodeID - ) -{ - UINT8 DCT; - MEM_NB_BLOCK *NBPtr; - MEM_DATA_STRUCT *MemPtr; - - NBPtr = S3NBPtr->NBPtr; - MemPtr = NBPtr->MemPtr; - - // Errata before S3 resume sequence - - // Add a hook here - AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); - if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) { - } - AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); - - NBPtr->ChangeNbFrequencyWrap (NBPtr, 0); - //Override the NB Pstate if needed - IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, S3NBPtr->NBPtr, &MemPtr->StdHeader); - // Set F2x[1,0]90[ExitSelfRef] - // Wait for F2x[1,0]90[ExitSelfRef]=0 - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - MemNSwitchDCTNb (NBPtr, DCT); - if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) { - MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1); - MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1); - while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {} - MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0); - } - } - - // Errata After S3 resume sequence - return TRUE; -} -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function executes the S3 resume for a node on a UNB - * - * @param[in,out] *S3NBPtr - Pointer to the S3_MEM_NB_BLOCK - * @param[in] NodeID - The Node id of the target die - * - * @return BOOLEAN - * TRUE - This is the correct constructor for the targeted node. - * FALSE - This isn't the correct constructor for the targeted node. - */ -BOOLEAN -MemNS3ResumeUNb ( - IN OUT S3_MEM_NB_BLOCK *S3NBPtr, - IN UINT8 NodeID - ) -{ - UINT8 DCT; - MEM_NB_BLOCK *NBPtr; - MEM_DATA_STRUCT *MemPtr; - - NBPtr = S3NBPtr->NBPtr; - MemPtr = NBPtr->MemPtr; - - // Errata before S3 resume sequence - - // Add a hook here - AGESA_TESTPOINT (TpProcMemBeforeAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); - if (AgesaHookBeforeExitSelfRefresh (0, MemPtr) == AGESA_SUCCESS) { - } - AGESA_TESTPOINT (TpProcMemAfterAgesaHookBeforeExitSelfRef, &MemPtr->StdHeader); - - //Override the NB Pstate if needed - IDS_OPTION_HOOK (IDS_NB_PSTATE_DIDVID, S3NBPtr->NBPtr, &MemPtr->StdHeader); - // Set F2x[1,0]90[ExitSelfRef] - // Wait for F2x[1,0]90[ExitSelfRef]=0 - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - MemNSwitchDCTNb (NBPtr, DCT); - if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface) == 0) { - MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1); - MemNSetBitFieldNb (NBPtr, BFExitSelfRef, 1); - while (MemNGetBitFieldNb (NBPtr, BFExitSelfRef) != 0) {} - MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0); - } - } - - // Errata After S3 resume sequence - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function returns the conditional PCI device mask - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in, out] *DescriptPtr - Pointer to DESCRIPTOR_GROUP - * @return none - */ -VOID -MemNS3GetConPCIMaskNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT DESCRIPTOR_GROUP *DescriptPtr - ) -{ - BIT_FIELD_NAME bitfield; - UINT32 RegVal; - UINT8 DCT; - UINT8 DimmMask; - UINT8 BadDimmMask; - UINT8 DctGangEn; - BOOLEAN IsDDR3; - - IsDDR3 = FALSE; - DimmMask = 0; - BadDimmMask = 0; - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - NBPtr->SwitchDCT (NBPtr, DCT); - if (MemNGetBitFieldNb (NBPtr, BFMemClkFreqVal)) { - if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode) == 1) { - IsDDR3 = TRUE; - } - for (bitfield = BFCSBaseAddr0Reg; bitfield <= BFCSBaseAddr7Reg; bitfield ++) { - RegVal = MemNGetBitFieldNb (NBPtr, bitfield); - if (RegVal & 0x3) { - DimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); - } else if (RegVal & 0x4) { - BadDimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); - } - } - } - } - - NBPtr->SwitchDCT (NBPtr, 0); - DctGangEn = (UINT8) MemNGetBitFieldNb (NBPtr, BFDctGangEn); - // Set channel mask - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = 0; - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = 0; - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - if (DimmMask & (0x55 << DCT)) { - // Set mask before exit self refresh - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT; - // Set mask after exit self refresh - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 1 << DCT; - // Set DDR3 mask if Dimms present are DDR3 - if (IsDDR3) { - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 << 4); - } - } else if (BadDimmMask & (0x55 << DCT)) { - // Need to save function 2 registers for bad dimm - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT; - } - } - - // Set dimm mask - DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = DimmMask; - DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = DimmMask; - if (DctGangEn) { - // Need to set channel mask bit to 1 on DCT1 in ganged mode as some registers - // need to be restored on both channels in ganged mode - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 2; - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 2; - if (IsDDR3) { - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= (2 << 4); - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (2 << 4); - } - // Before exit self refresh, do not copy dimm mask to DCT1 as registers restored - // in that time frame don't care about individual dimm population. We want to - // skip registers that are not needed to be restored for DCT1 in ganged mode. - // - // After exit self refresh, training registers will be restored and will only be - // restored for slots which have dimms on it. So dimm mask needs to be copied to DCT1. - // - DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 |= DimmMask << 1; - } - - // Adjust the mask if there is no dimm on the node - if ((DescriptPtr->CPCIDevice[PRESELFREF].Mask2 == 0) && - (DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 == 0)) { - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function returns the conditional PCI device mask - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in, out] *DescriptPtr - Pointer to DESCRIPTOR_GROUP - * @return none - */ -VOID -MemNS3GetConPCIMaskUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN OUT DESCRIPTOR_GROUP *DescriptPtr - ) -{ - BIT_FIELD_NAME bitfield; - UINT32 RegVal; - UINT8 DCT; - UINT8 DimmMask; - UINT8 BadDimmMask; - UINT8 NbPsCap; - - DimmMask = 0; - BadDimmMask = 0; - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - MemNSwitchDCTNb (NBPtr, DCT); - if (MemNGetBitFieldNb (NBPtr, BFMemClkFreqVal)) { - for (bitfield = BFCSBaseAddr0Reg; bitfield <= BFCSBaseAddr7Reg; bitfield ++) { - RegVal = MemNGetBitFieldNb (NBPtr, bitfield); - if (RegVal & 0x1) { - DimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); - } else if (RegVal & 0x4) { - BadDimmMask |= (UINT8) (1 << ((((bitfield - BFCSBaseAddr0Reg) >> 1) << 1) + DCT)); - } - } - } - } - // Check if the system is capable of doing NB Pstate change - NbPsCap = (UINT8) MemNGetBitFieldNb (NBPtr, BFNbPstateDis); - - MemNSwitchDCTNb (NBPtr, 0); - // Set channel mask - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = 0; - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = 0; - for (DCT = 0; DCT < NBPtr->DctCount; DCT ++) { - if (DimmMask & (0x55 << DCT)) { - // Set mask before exit self refresh - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= ((NbPsCap == 0) ? 5 : 1) << DCT; - // Set mask after exit self refresh - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= 1 << DCT; - // Set DDR3 mask if Dimms present are DDR3 - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 |= (DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 << 4); - } else if (BadDimmMask & (0x55 << DCT)) { - // Need to save function 2 registers for bad dimm - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 |= 1 << DCT; - } - } - - // Set dimm mask - DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = DimmMask; - DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = DimmMask; - - // Adjust the mask if there is no dimm on the node - if ((DescriptPtr->CPCIDevice[PRESELFREF].Mask2 == 0) && - (DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 == 0)) { - DescriptPtr->CPCIDevice[PRESELFREF].Mask1 = DescriptPtr->CPCIDevice[PRESELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; - DescriptPtr->CPCIDevice[POSTSELFREF].Mask1 = DescriptPtr->CPCIDevice[POSTSELFREF].Mask2 = NODE_WITHOUT_DIMM_MASK; - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function read the value of CSR register. - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the CSR register in PCI_ADDR format. - * @param[in] *Value - Pointer to the value be read. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3GetCSRNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT32 ExtendOffset; - UINT32 ValueRead; - UINT8 DataPort; - - ValueRead = 0; - ExtendOffset = Address.Address.Register; - if (ExtendOffset & 0x800) { - Address.Address.Register = 0xF0; - DataPort = 0xF4; - } else { - Address.Address.Register = 0x98; - DataPort = 0x9C; - } - if (ExtendOffset & 0x400) { - Address.Address.Register |= 0x100; - } - ExtendOffset &= 0x3FF; - LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr); - while (((ValueRead >> 31) & 1) == 0) { - LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr); - } - Address.Address.Register = (Address.Address.Register & 0xF00) | DataPort; - LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr); -} - - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function write to a CSR register - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the CSR register in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value be read. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetCSRNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT32 ExtendOffset; - UINT32 ValueRead; - UINT32 ValueWrite; - UINT8 DataOffset; - - ValueRead = 0; - ExtendOffset = Address.Address.Register; - // Check the flag and see the type of the access - if (ExtendOffset & 0x800) { - Address.Address.Register = 0xF4; - DataOffset = 0xF0; - } else { - Address.Address.Register = 0x9C; - DataOffset = 0x98; - } - if (ExtendOffset & 0x400) { - Address.Address.Register |= 0x100; - } - ExtendOffset &= 0x3FF; - ExtendOffset |= 0x40000000; - switch (AccessWidth) { - case AccessS3SaveWidth8: - ValueWrite = *(UINT8 *) Value; - break; - case AccessS3SaveWidth16: - ValueWrite = *(UINT16 *) Value; - break; - case AccessS3SaveWidth32: - ValueWrite = *(UINT32 *) Value; - break; - default: - ASSERT (FALSE); - } - LibAmdPciWrite (AccessS3SaveWidth32, Address, &ValueWrite, ConfigPtr); - Address.Address.Register = (Address.Address.Register & 0xF00) | DataOffset; - LibAmdPciWrite (AccessS3SaveWidth32, Address, &ExtendOffset, ConfigPtr); - while (((ValueRead >> 31) & 1) == 0) { - LibAmdPciRead (AccessS3SaveWidth32, Address, &ValueRead, ConfigPtr); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function reads register bitfield - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the CSR register in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value be read. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3GetBitFieldNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - MemNS3GetSetBitField (AccessWidth, Address, FALSE, Value, ConfigPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function writes register bitfield - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the CSR register in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetBitFieldNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - MemNS3GetSetBitField (AccessWidth, Address, TRUE, Value, ConfigPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function restores scrubber base register - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] Node - The Node id of the target die - * - */ -VOID -MemNS3RestoreScrubNb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN UINT8 Node - ) -{ - UINT32 ScrubAddrRJ16; - - ScrubAddrRJ16 = (MemNGetBitFieldNb (NBPtr, BFDramBaseReg0 + Node) & 0xFFFF0000) >> 8; - ScrubAddrRJ16 |= MemNGetBitFieldNb (NBPtr, BFDramBaseHiReg0 + Node) << 24; - MemNSetBitFieldNb (NBPtr, BFScrubAddrLoReg, ScrubAddrRJ16 << 16); - MemNSetBitFieldNb (NBPtr, BFScrubAddrHiReg, ScrubAddrRJ16 >> 16); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function disable NB Pstate Debug. - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3DisNbPsDbgNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT32 RegValue; - - LibAmdPciRead (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); - // Clear NbPsDbgEn and NbPsCsrAccSel - if ((RegValue & 0xC0000000) != 0) { - RegValue &= 0x3FFFFFFF; - LibAmdPciWrite (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function that enable NB Pstate debug register to allow access to NB Pstate - * 1 registers without actually changing NB Pstate. - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3EnNbPsDbg1Nb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT32 RegValue; - - LibAmdPciRead (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); - // Set NbPsDbgEn to 1 and NbPsCsrAccSel to 1 - if ((RegValue & 0xC0000000) != 0xC0000000) { - RegValue = (*(UINT32 *)Value & 0x3FFFFFFF) | 0xC0000000; - LibAmdPciWrite (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function sets bit 31 [DynModeChange] of F2x9C_xB - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetDynModeChangeNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT32 RegValue; - - RegValue = 0x80000000; - IDS_SKIP_HOOK (IDS_BEFORE_S3_SPECIAL, &Address, ConfigPtr) { - MemNS3SetCSRNb (AccessS3SaveWidth32, Address, &RegValue, ConfigPtr); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function does the channel disable sequence - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3DisableChannelNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - MEM_NB_BLOCK *NBPtr; - LOCATE_HEAP_PTR LocateBufferPtr; - S3_MEM_NB_BLOCK *S3NBPtr; - UINT32 RegValue; - UINT8 Die; - - // See which Node should be accessed - Die = (UINT8) (Address.Address.Device - 24); - - LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE; - if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) { - S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr; - NBPtr = S3NBPtr[Die].NBPtr; - - // Function field contains the DCT number - NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function); - RegValue = MemNGetBitFieldNb (NBPtr, BFCKETri); - // if CKETri is 0b11, this channel is disabled - if (RegValue == 3) { - //Wait for 24 MEMCLKs, which is 60ns under 400MHz - MemFS3Wait10ns (6, NBPtr->MemPtr); - MemNSetBitFieldNb (NBPtr, BFMemClkDis, 0xFF); - MemNSetBitFieldNb (NBPtr, BFDisDramInterface, 1); - MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x80800000); - } - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function disables auto compensation. - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetDisAutoCompUnb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT16 RegValue; - - MemNS3GetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); - RegValue = 0x6000 | RegValue; - MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function retores Pre Driver Calibration with pre driver calibration code - * code valid bit set. - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetPreDriverCalUnb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT16 RegValue; - - RegValue = 0x8000 | *(UINT16 *) Value; - MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function is used by families that use a separate DctCfgSel bit to - * select the current DCT which will be accessed by function 2. - * NOTE: This function must be called BEFORE the NBPtr->Dct variable is - * updated. - * - * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK - * @param[in] *Dct - Pointer to ID of the target DCT - * - */ - -BOOLEAN -MemNS3DctCfgSelectUnb ( - IN OUT MEM_NB_BLOCK *NBPtr, - IN VOID *Dct - ) -{ - // Set the DctCfgSel to new DCT - // - MemNSetBitFieldNb (NBPtr, BFDctCfgSel, *(UINT8*)Dct); - - return TRUE; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function write to a register that has one copy for each NB Pstate - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the CSR register in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value be read. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3GetNBPStateDepRegUnb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT8 NBPstate; - UINT8 TempValue; - UINT8 Dct; - UINT32 Temp; - - Temp = Address.Address.Register; - NBPstate = (UINT8) (Temp >> 10); - Dct = (UINT8) Address.Address.Function; - Temp &= 0x3FF; - - // Switch Dct - // Function field contains DCT value - Address.Address.Function = FUNC_1; - Address.Address.Register = 0x10C; - LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - TempValue = (TempValue & 0xCE) | ((NBPstate << 4) | Dct); - LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - - Address.Address.Function = FUNC_2; - Address.Address.Register = Temp; - LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr); - - Address.Address.Function = FUNC_1; - Address.Address.Register = 0x10C; - TempValue = 0; - LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function write to a register that has one copy for each NB Pstate - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the CSR register in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value be read. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetNBPStateDepRegUnb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT8 NBPstate; - UINT8 TempValue; - UINT8 Dct; - UINT32 Temp; - - Temp = Address.Address.Register; - NBPstate = (UINT8) (Temp >> 10); - Dct = (UINT8) Address.Address.Function; - Temp &= 0x3FF; - - // Switch Dct - // Function field contains DCT value - Address.Address.Function = FUNC_1; - Address.Address.Register = 0x10C; - LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - TempValue = (TempValue & 0xCE) | ((NBPstate << 4) | Dct); - LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - - Address.Address.Function = FUNC_2; - Address.Address.Register = Temp; - LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr); - - Address.Address.Function = FUNC_1; - Address.Address.Register = 0x10C; - TempValue = 0; - LibAmdPciWrite (AccessS3SaveWidth32, Address, &TempValue, ConfigPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function read the value of Function 2 PCI register. - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the NB register in PCI_ADDR format. - * @param[in] *Value - Pointer to the value be read. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SaveNBRegiserUnb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT8 TempValue; - UINT8 Dct; - UINT32 Temp; - - Temp = Address.Address.Register; - Dct = (UINT8) Address.Address.Function; - - // Switch Dct - // Function field contains DCT value - Address.Address.Function = FUNC_1; - Address.Address.Register = 0x10C; - LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - TempValue = (TempValue & 0xFE) | Dct; - LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - - Address.Address.Register = Temp; - Address.Address.Function = FUNC_2; - LibAmdPciRead (AccessWidth, Address, Value, ConfigPtr); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function set the value of Function 2 PCI register. - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the NB register in PCI_ADDR format. - * @param[in] *Value - Pointer to the value be write. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3RestoreNBRegiserUnb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT8 TempValue; - UINT8 Dct; - UINT32 Temp; - - Temp = Address.Address.Register; - Dct = (UINT8) Address.Address.Function; - - // Switch Dct - // Function field contains DCT value - Address.Address.Function = FUNC_1; - Address.Address.Register = 0x10C; - LibAmdPciRead (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - TempValue = (TempValue & 0xFE) | Dct; - LibAmdPciWrite (AccessS3SaveWidth8, Address, &TempValue, ConfigPtr); - - Address.Address.Register = Temp; - Address.Address.Function = FUNC_2; - LibAmdPciWrite (AccessWidth, Address, Value, ConfigPtr); -} - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *----------------------------------------------------------------------------*/ - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function reads and writes register bitfield - * - * @param[in] AccessWidth - Access width of the register - * @param[in] Address - address of the CSR register in PCI_ADDR format. - * @param[in] IsSet - if this is a register read or write - * @param[in, out] *Value - Pointer to the value be read or written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -STATIC -MemNS3GetSetBitField ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN BOOLEAN IsSet, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - BIT_FIELD_NAME BitField; - MEM_NB_BLOCK *NBPtr; - LOCATE_HEAP_PTR LocateBufferPtr; - S3_MEM_NB_BLOCK *S3NBPtr; - UINT32 RegValue; - UINT8 Die; - - RegValue = 0; - // See which Node should be accessed - Die = (UINT8) (Address.Address.Device - 24); - - LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE; - if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) { - S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr; - NBPtr = S3NBPtr[Die].NBPtr; - - // Function field contains the DCT number - NBPtr->SwitchDCT (NBPtr, (UINT8) Address.Address.Function); - - // Get the bitfield name to be accessed - // Register field contains the bitfield name - BitField = (BIT_FIELD_NAME) Address.Address.Register; - - if (IsSet) { - switch (AccessWidth) { - case AccessS3SaveWidth8: - RegValue = *(UINT8 *) Value; - break; - case AccessS3SaveWidth16: - RegValue = *(UINT16 *) Value; - break; - case AccessS3SaveWidth32: - RegValue = *(UINT32 *) Value; - break; - default: - ASSERT (FALSE); - } - MemNSetBitFieldNb (NBPtr, BitField, RegValue); - } else { - RegValue = MemNGetBitFieldNb (NBPtr, BitField); - - switch (AccessWidth) { - case AccessS3SaveWidth8: - *(UINT8 *) Value = (UINT8) RegValue; - break; - case AccessS3SaveWidth16: - *(UINT16 *) Value = (UINT16) RegValue; - break; - case AccessS3SaveWidth32: - *(UINT32 *) Value = RegValue; - break; - default: - ASSERT (FALSE); - } - } - } else { - ASSERT (FALSE); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function gets the dummy read address for a channel of a node. - * - * @param[in, out] *NBPtr - Pointer to northbridge block - * @param[out] *TestAddr - Pointer to the test address - * - * @retval TRUE - Dummy read address can be found - * @retval FALSE - Dummy read address cannot be found - * - */ -BOOLEAN -STATIC -MemNS3GetDummyReadAddr ( - IN OUT MEM_NB_BLOCK *NBPtr, - OUT UINT64 *TestAddr - ) -{ - BOOLEAN DctSelIntlvEn; - UINT8 DramIntlvEn; - UINT8 DctSelIntlvAddr; - UINT8 IntLvRgnBaseAddr; - UINT8 IntLvRgnLmtAddr; - UINT8 IntLvRgnSize; - UINT32 DctSelBaseAddr; - UINT64 TOM; - BOOLEAN AddrFound; - - AddrFound = TRUE; - // Check if Node interleaving is enabled - DramIntlvEn = (UINT8) MemNGetBitFieldNb (NBPtr, BFDramIntlvEn); - if (DramIntlvEn != 0) { - // Set the address bits that identify the node - *TestAddr = (UINT64) MemNGetBitFieldNb (NBPtr, BFDramIntlvSel) << 12; - } else { - *TestAddr = (UINT64) MemNGetBitFieldNb (NBPtr, BFDramBaseAddr) << 27; - } - - // Check if channel interleaving is enabled - DctSelIntlvEn = (BOOLEAN) MemNGetBitFieldNb (NBPtr, BFDctSelIntLvEn); - DctSelBaseAddr = MemNGetBitFieldNb (NBPtr, BFDctSelBaseAddr); - if (!DctSelIntlvEn) { - if ((NBPtr->Dct == 1) && ((UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelHi) == 1)) { - *TestAddr = ((UINT64) DctSelBaseAddr << 27) | (*TestAddr & 0xFFFFFFF); - } - } else { - DctSelIntlvAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelIntLvAddr); - // Set the address bits that identify the channel - if ((DctSelIntlvAddr == 0) || (DctSelIntlvAddr == 2)) { - *TestAddr |= (UINT64) NBPtr->Dct << 6; - } else if (DctSelIntlvAddr == 1) { - *TestAddr |= (UINT64) NBPtr->Dct << (12 + LibAmdBitScanReverse (DramIntlvEn + 1)); - } else if (DctSelIntlvAddr == 3) { - *TestAddr |= (UINT64) NBPtr->Dct << 9; - } - } - // Adding 2M to avoid conflict - *TestAddr += 0x200000; - - // If memory hoisting is disabled, the address can fall into MMIO area - // Need to find an address out of MMIO area but belongs to the channel - // If the whole channel is in MMIO, then do not do dummy read. - // - LibAmdMsrRead (TOP_MEM, &TOM, &NBPtr->MemPtr->StdHeader); - if ((*TestAddr >= TOM) && (*TestAddr < ((UINT64) _4GB_RJ16 << 16))) { - if ((NBPtr->Dct == 1) && ((UINT8) MemNGetBitFieldNb (NBPtr, BFDctSelHi) == 1)) { - // This is the DCT that goes to high address range - if (DctSelBaseAddr >= (_4GB_RJ16 >> (27 - 16))) { - // When DctSelBaseAddr is higher than 4G, choose DctSelBaseAddr as the dummy read addr - if (DctSelIntlvEn) { - *TestAddr = ((UINT64) DctSelBaseAddr << 27) | (*TestAddr & 0xFFFFFFF); - } - } else if (MemNGetBitFieldNb (NBPtr, BFDramLimitAddr) > (UINT32) (_4GB_RJ16 >> (27 - 16))) { - // if DctSelBase is smaller than 4G, but Dram limit is larger than 4G, then choose 4G as - // dummy read address - *TestAddr = ((UINT64) _4GB_RJ16 << 16) | (*TestAddr & 0xFFFFFF); - } else { - AddrFound = FALSE; - } - } else { - // This is the DCT that only goes to low address range - if (DctSelBaseAddr > (_4GB_RJ16 >> (27 - 16))) { - // When DctSelBaseAddr is larger than 4G, choose 4G as the dummy read address - // Keep the lower bits for node and channel selection - *TestAddr = ((UINT64) _4GB_RJ16 << 16) | (*TestAddr & 0xFFFFFF); - } else { - AddrFound = FALSE; - } - } - } - - // Interleaved Swap Region handling - if ((BOOLEAN) MemNGetBitFieldNb (NBPtr, BFIntLvRgnSwapEn)) { - IntLvRgnBaseAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnBaseAddr); - IntLvRgnLmtAddr = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnLmtAddr); - IntLvRgnSize = (UINT8) MemNGetBitFieldNb (NBPtr, BFIntLvRgnSize); - ASSERT (IntLvRgnSize == (IntLvRgnLmtAddr - IntLvRgnBaseAddr + 1)); - if (((*TestAddr >> 34) == 0) && - ((((*TestAddr >> 27) >= IntLvRgnBaseAddr) && ((*TestAddr >> 27) <= IntLvRgnLmtAddr)) - || ((*TestAddr >> 27) < IntLvRgnSize))) { - *TestAddr ^= (UINT64) IntLvRgnBaseAddr << 27; - } - } - - return AddrFound; -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function sets bit 7 [MemClkFreqVal] of F2x94_dct[1:0] - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetMemClkFreqValUnb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT32 TempValue; - - // 1. Program F2x94_dct[1:0][MemClkFreqVal] = 1 - MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); - TempValue |= 0x80; - MemNS3RestoreNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); - - // 2. Wait for F2x94_dct[1:0][FreqChgInPrg] = 0 - MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); - while ((TempValue & 0x200000) != 0) { - MemNS3SaveNBRegiserUnb (AccessWidth, Address, &TempValue, ConfigPtr); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function changes memory Pstate context - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. Target MemPState is in - * Address.Address.Register. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - * - * @return TRUE - * ---------------------------------------------------------------------------- - */ -VOID -MemNS3ChangeMemPStateContextNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - MEM_NB_BLOCK *NBPtr; - LOCATE_HEAP_PTR LocateBufferPtr; - S3_MEM_NB_BLOCK *S3NBPtr; - UINT8 Die; - - // See which Node should be accessed - Die = (UINT8) (Address.Address.Device - 24); - - LocateBufferPtr.BufferHandle = AMD_MEM_S3_NB_HANDLE; - if (HeapLocateBuffer (&LocateBufferPtr, ConfigPtr) == AGESA_SUCCESS) { - S3NBPtr = (S3_MEM_NB_BLOCK *) LocateBufferPtr.BufferPtr; - NBPtr = S3NBPtr[Die].NBPtr; - MemNChangeMemPStateContextNb (NBPtr, Address.Address.Register); - } -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * - * This function retores Phy Clk DLL fine delay - * - * @param[in] AccessWidth - Access width of the register. - * @param[in] Address - address in PCI_ADDR format. - * @param[in, out] *Value - Pointer to the value to be written. - * @param[in, out] *ConfigPtr - Pointer to Config handle. - * @return none - */ -VOID -MemNS3SetPhyClkDllFineClientNb ( - IN ACCESS_WIDTH AccessWidth, - IN PCI_ADDR Address, - IN OUT VOID *Value, - IN OUT VOID *ConfigPtr - ) -{ - UINT16 RegValue; - - RegValue = 0x4000 | *(UINT16 *) Value; - MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); - RegValue = 0xBFFF & *(UINT16 *) Value; - MemNS3SetBitFieldNb (AccessS3SaveWidth16, Address, &RegValue, ConfigPtr); -} |