diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Mem/NB/HY/mnhy.c')
-rwxr-xr-x | src/vendorcode/amd/agesa/f12/Proc/Mem/NB/HY/mnhy.c | 489 |
1 files changed, 489 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/HY/mnhy.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/HY/mnhy.c new file mode 100755 index 0000000000..f1b9a9cb24 --- /dev/null +++ b/src/vendorcode/amd/agesa/f12/Proc/Mem/NB/HY/mnhy.c @@ -0,0 +1,489 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mnhy.c + * + * Common Northbridge functions for Hydra + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/NB/HY) + * @e \$Revision: 47408 $ @e \$Date: 2011-02-19 00:56:31 +0800 (Sat, 19 Feb 2011) $ + * + **/ +/***************************************************************************** +* +* Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* *************************************************************************** +* +*/ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "AdvancedApi.h" +#include "amdlib.h" +#include "Ids.h" +#include "OptionMemory.h" +#include "mm.h" +#include "mn.h" +#include "mnhy.h" +#include "mu.h" +#include "S3.h" +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "heapManager.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G1_PEICC) + +#define FILECODE PROC_MEM_NB_HY_MNHY_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ + +#define SPLIT_CHANNEL (UINT32) 0x20000000 +#define CHANNEL_SELECT (UINT32) 0x10000000 + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +extern BUILD_OPT_CFG UserOptions; +extern PSO_ENTRY DefaultPlatformMemoryConfiguration[]; + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initializes the northbridge block + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT + * @param[in] *FeatPtr - Pointer to the MEM_FEAT_BLOCK_NB + * @param[in] *SharedPtr - Pointer to the MEM_SHARED_DATA + * @param[in] NodeID - UINT8 indicating node ID of the NB object. + * + * @return Boolean indicating that this is the correct memory + * controller type for the node number that was passed in. + */ + +BOOLEAN +MemConstructNBBlockHY ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT MEM_DATA_STRUCT *MemPtr, + IN MEM_FEAT_BLOCK_NB *FeatPtr, + IN MEM_SHARED_DATA *SharedPtr, + IN UINT8 NodeID + ) +{ + UINT8 Dct; + UINT8 Channel; + UINT8 SpdSocketIndex; + UINT8 SpdChannelIndex; + DIE_STRUCT *MCTPtr; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + // + // Determine if this is the expected NB Type + // + GetLogicalIdOfSocket (MemPtr->DiesPerSystem[NodeID].SocketId, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); + if (!MemNIsIdSupportedHy (NBPtr, &(MemPtr->DiesPerSystem[NodeID].LogicalCpuid))) { + return FALSE; + } + + NBPtr->MemPtr = MemPtr; + NBPtr->RefPtr = MemPtr->ParameterListPtr; + NBPtr->SharedPtr = SharedPtr; + + MCTPtr = &(MemPtr->DiesPerSystem[NodeID]); + NBPtr->MCTPtr = MCTPtr; + NBPtr->MCTPtr->NodeId = NodeID; + NBPtr->PciAddr.AddressValue = MCTPtr->PciAddr.AddressValue; + NBPtr->VarMtrrHiMsk = GetVarMtrrHiMsk (&(MemPtr->DiesPerSystem[NodeID].LogicalCpuid), &(MemPtr->StdHeader)); + + // + // Allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs + // + AllocHeapParams.RequestedBufferSize = MAX_DCTS_PER_NODE_HY * ( + sizeof (DCT_STRUCT) + ( + MAX_CHANNELS_PER_DCT_HY * (sizeof (CH_DEF_STRUCT) + sizeof (MEM_PS_BLOCK)) + ) + ); + AllocHeapParams.BufferHandle = GENERATE_MEM_HANDLE (ALLOC_DCT_STRUCT_HANDLE, NodeID, 0, 0); + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + if (HeapAllocateBuffer (&AllocHeapParams, &MemPtr->StdHeader) != AGESA_SUCCESS) { + PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs, NBPtr->Node, 0, 0, 0, &MemPtr->StdHeader); + SetMemError (AGESA_FATAL, MCTPtr); + ASSERT(FALSE); // Could not allocate buffer for DCT_STRUCTs and CH_DEF_STRUCTs + return FALSE; + } + + MCTPtr->DctCount = MAX_DCTS_PER_NODE_HY; + MCTPtr->DctData = (DCT_STRUCT *) AllocHeapParams.BufferPtr; + AllocHeapParams.BufferPtr += MAX_DCTS_PER_NODE_HY * sizeof (DCT_STRUCT); + for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) { + MCTPtr->DctData[Dct].Dct = Dct; + MCTPtr->DctData[Dct].ChannelCount = MAX_CHANNELS_PER_DCT_HY; + MCTPtr->DctData[Dct].ChData = (CH_DEF_STRUCT *) AllocHeapParams.BufferPtr; + MCTPtr->DctData[Dct].ChData[0].Dct = Dct; + AllocHeapParams.BufferPtr += MAX_CHANNELS_PER_DCT_HY * sizeof (CH_DEF_STRUCT); + } + NBPtr->PSBlock = (MEM_PS_BLOCK *) AllocHeapParams.BufferPtr; + + // + // Initialize Socket List + // + for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) { + MemPtr->SocketList[MCTPtr->SocketId].ChannelPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].ChData[0]); + MemPtr->SocketList[MCTPtr->SocketId].TimingsPtr[(MCTPtr->DieId * 2) + Dct] = &(MCTPtr->DctData[Dct].Timings); + MCTPtr->DctData[Dct].ChData[0].ChannelID = (MCTPtr->DieId * 2) + Dct; + } + + MemNInitNBDataHy (NBPtr); + + FeatPtr->InitCPG (NBPtr); + NBPtr->FeatPtr = FeatPtr; + FeatPtr->InitHwRxEn (NBPtr); + // + // Calculate SPD Offsets per channel and assign pointers to the data. At this point, we calculate the Node-Dct-Channel + // centric offsets and store the pointers to the first DIMM of each channel in the Channel Definition struct for that + // channel. This pointer is then used later to calculate the offsets to be used for each logical dimm once the + // dimm types(QR or not) are known. This is done in the Technology block constructor. + // + // Calculate the SpdSocketIndex separately from the SpdChannelIndex. + // This will facilitate modifications due to some processors that might + // map the DCT-CHANNEL differently. + // + SpdSocketIndex = GetSpdSocketIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, &MemPtr->StdHeader); + // + // Traverse the Dct/Channel structures + // + for (Dct = 0; Dct < MAX_DCTS_PER_NODE_HY; Dct++) { + for (Channel = 0; Channel < MAX_CHANNELS_PER_DCT_HY; Channel++) { + // + // Calculate the number of Dimms on this channel using the + // die/dct/channel to Socket/channel conversion. + // + SpdChannelIndex = GetSpdChannelIndex (NBPtr->RefPtr->PlatformMemoryConfiguration, + NBPtr->MCTPtr->SocketId, + MemNGetSocketRelativeChannelNb (NBPtr, Dct, Channel), + &MemPtr->StdHeader); + NBPtr->MCTPtr->DctData[Dct].ChData[Channel].SpdPtr = &(MemPtr->SpdDataStructure[SpdSocketIndex + SpdChannelIndex]); + } + } + + MemNSwitchDCTNb (NBPtr, 0); + + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function initializes member functions and variables of NB block. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemNInitNBDataHy ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + NBPtr->DctCachePtr = NBPtr->DctCache; + NBPtr->PsPtr = NBPtr->PSBlock; + + InitNBRegTableHy (NBPtr, NBPtr->NBRegTable); + NBPtr->Node = ((UINT8) NBPtr->PciAddr.Address.Device) - 24; + NBPtr->Dct = 0; + NBPtr->Channel = 0; + NBPtr->DctCount = MAX_DCTS_PER_NODE_HY; + NBPtr->ChannelCount = MAX_CHANNELS_PER_DCT_HY; + NBPtr->NodeCount = MAX_NODES_SUPPORTED_HY; + NBPtr->Ganged = FALSE; + NBPtr->PosTrnPattern = POS_PATTERN_256B; + NBPtr->MemCleared = FALSE; + NBPtr->StartupSpeed = DDR800_FREQUENCY; + NBPtr->RcvrEnDlyLimit = 0x1FF; + NBPtr->DefDctSelIntLvAddr = 3; + NBPtr->CsRegMsk = 0x1FF83FE0; + + LibAmdMemFill (NBPtr->DctCache, 0, sizeof (NBPtr->DctCache), &NBPtr->MemPtr->StdHeader); + + NBPtr->SetMaxLatency = MemNSetMaxLatencyNb; + NBPtr->getMaxLatParams = MemNGetMaxLatParamsNb; + NBPtr->InitializeMCT = MemNInitializeMctHy; + NBPtr->FinalizeMCT = MemNFinalizeMctHy; + NBPtr->SendMrsCmd = MemNSendMrsCmdHy; + NBPtr->sendZQCmd = MemNSendZQCmdNb; + NBPtr->WritePattern = MemNWritePatternHy; + NBPtr->ReadPattern = MemNReadPatternHy; + NBPtr->GenHwRcvEnReads = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet; + NBPtr->CompareTestPattern = MemNCompareTestPatternNb; + NBPtr->InsDlyCompareTestPattern = MemNInsDlyCompareTestPatternNb; + NBPtr->StitchMemory = MemNStitchMemoryNb; + NBPtr->AutoConfig = MemNAutoConfigHy; + NBPtr->PlatformSpec = MemNPlatformSpecNb; + NBPtr->InitMCT = MemNInitMCTNb; + NBPtr->DisableDCT = MemNDisableDCTNb; + NBPtr->StartupDCT = MemNStartupDCTNb; + NBPtr->SyncTargetSpeed = MemNSyncTargetSpeedNb; + NBPtr->ChangeFrequency = MemNChangeFrequencyNb; + NBPtr->RampUpFrequency = MemNRampUpFrequencyNb; + NBPtr->ChangeNbFrequency = (BOOLEAN (*) (MEM_NB_BLOCK *)) memDefFalse; + NBPtr->ProgramCycTimings = MemNProgramCycTimingsNb; + NBPtr->SyncDctsReady = MemNSyncDctsReadyNb; + NBPtr->HtMemMapInit = MemNHtMemMapInitNb; + NBPtr->SyncAddrMapToAllNodes = MemNSyncAddrMapToAllNodesNb; + NBPtr->CpuMemTyping = MemNCPUMemTypingNb; + NBPtr->BeforeDqsTraining = MemNBeforeDQSTrainingHy; + NBPtr->AfterDqsTraining = (VOID (*) (MEM_NB_BLOCK *)) memDefRet; + NBPtr->OtherTiming = MemNOtherTimingHy; + NBPtr->UMAMemTyping = MemNUMAMemTypingNb; + NBPtr->GetSocketRelativeChannel = MemNGetSocketRelativeChannelHy; + NBPtr->TechBlockSwitch = MemNTechBlockSwitchNb; + NBPtr->MemNCmnGetSetFieldNb = MemNCmnGetSetFieldHy; + NBPtr->SetEccSymbolSize = MemNSetEccSymbolSizeNb; + NBPtr->TrainingFlow = MemNTrainingFlowNb; + MemNInitNBDataNb (NBPtr); + NBPtr->PollBitField = MemNPollBitFieldNb; + NBPtr->BrdcstCheck = MemNBrdcstCheckNb; + NBPtr->BrdcstSet = MemNBrdcstSetNb; + NBPtr->GetTrainDly = MemNGetTrainDlyNb; + NBPtr->SetTrainDly = MemNSetTrainDlyNb; + NBPtr->PhyFenceTraining = MemNPhyFenceTrainingNb; + NBPtr->GetSysAddr = MemNGetMCTSysAddrNb; + NBPtr->RankEnabled = MemNRankEnabledNb; + NBPtr->MemNBeforeDramInitNb = MemNBeforeDramInitHy; + NBPtr->MemNcmnGetSetTrainDly = MemNcmnGetSetTrainDlyNb; + NBPtr->MemPPhyFenceTrainingNb = MemNTrainPhyFenceNb; + NBPtr->MemNInitPhyComp = MemNInitPhyCompHy; + NBPtr->MemNBeforePlatformSpecNb = MemNBeforePlatformSpecHy; + NBPtr->MemNPlatformSpecificFormFactorInitNb = MemNPlatformSpecificFormFactorInitHy; + NBPtr->MemNPFenceAdjustNb = (VOID (*) (MEM_NB_BLOCK *, INT16 *)) memDefRet; + NBPtr->GetTrainDlyParms = MemNGetTrainDlyParmsNb; + NBPtr->TrainingPatternInit = MemNTrainingPatternInitNb; + NBPtr->TrainingPatternFinalize = MemNTrainingPatternFinalizeNb; + NBPtr->GetApproximateWriteDatDelay = MemNGetApproximateWriteDatDelayNb; + NBPtr->CSPerChannel = MemNCSPerChannelNb; + NBPtr->CSPerDelay = MemNCSPerDelayNb; + NBPtr->FlushPattern = MemNFlushPatternNb; + NBPtr->MinDataEyeWidth = MemNMinDataEyeWidthNb; + NBPtr->MemNCapSpeedBatteryLife = (VOID (*) (MEM_NB_BLOCK *)) memDefRet; + NBPtr->GetUmaSize = MemNGetUmaSizeNb; + NBPtr->GetMemClkFreqId = MemNGetMemClkFreqIdNb; + NBPtr->EnableSwapIntlvRgn = (VOID (*) (MEM_NB_BLOCK *, UINT32, UINT32)) memDefRet; + NBPtr->WaitXMemClks = MemNWaitXMemClksNb; + NBPtr->MemNGetDramTerm = MemNGetDramTermNb; + NBPtr->MemNGetDynDramTerm = MemNGetDynDramTermNb; + NBPtr->MemNGetMR0CL = MemNGetMR0CLNb; + NBPtr->MemNGetMR0WR = MemNGetMR0WRNb; + NBPtr->MemNSaveMR0 = (VOID (*) (MEM_NB_BLOCK *, UINT32)) memDefRet; + NBPtr->MemNGetMR2CWL = MemNGetMR2CWLNb; + NBPtr->AllocateC6Storage = (VOID (*) (MEM_NB_BLOCK *)) memDefRet; + + NBPtr->IsSupported[SetSpareEn] = TRUE; + NBPtr->IsSupported[CheckSpareEn] = TRUE; + NBPtr->IsSupported[SetDllShutDown] = TRUE; + NBPtr->IsSupported[CheckEccDLLPwrDnConfig] = TRUE; + NBPtr->IsSupported[CheckMaxDramRate] = TRUE; + NBPtr->IsSupported[CheckMemClkCSPresent] = TRUE; + NBPtr->IsSupported[CheckMaxRdDqsDlyPtr] = TRUE; + NBPtr->IsSupported[CheckPhyFenceTraining] = TRUE; + NBPtr->IsSupported[CheckSendAllMRCmds] = TRUE; + NBPtr->IsSupported[CheckFindPSOverideWithSocket] = TRUE; + NBPtr->IsSupported[CheckODTControls] = TRUE; + NBPtr->IsSupported[CheckDummyCLRead] = TRUE; + NBPtr->IsSupported[CheckSlewWithoutMarginImprv] = TRUE; + NBPtr->IsSupported[CheckDllSpeedUp] = TRUE; + NBPtr->IsSupported[ForceEnMemHoleRemapping] = TRUE; + + NBPtr->FamilySpecificHook[SendMrsCmdsPerCs] = MemNSendMrsCmdPerCsHy; + NBPtr->FamilySpecificHook[InitExtMMIOAddr] = MemNInitExtMMIOAddrHy; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initializes the default values in the MEM_DATA_STRUCT + * + * @param[in,out] *MemPtr - Pointer to the MEM_DATA_STRUCT + * + */ +VOID +MemNInitDefaultsHY ( + IN OUT MEM_DATA_STRUCT *MemPtr + ) +{ + UINT8 Socket; + UINT8 Channel; + MEM_PARAMETER_STRUCT *RefPtr; + ASSERT (MemPtr != NULL); + RefPtr = MemPtr->ParameterListPtr; + + // Memory Map/Mgt. + // Mask Bottom IO with 0xF8 to force hole size to have granularity of 128MB + RefPtr->BottomIo = 0xE0; + RefPtr->UmaMode = UserOptions.CfgUmaMode; + RefPtr->UmaSize = UserOptions.CfgUmaSize; + RefPtr->MemHoleRemapping = TRUE; + RefPtr->LimitMemoryToBelow1Tb = UserOptions.CfgLimitMemoryToBelow1Tb; + // + + + // Dram Timing + RefPtr->UserTimingMode = UserOptions.CfgTimingModeSelect; + RefPtr->MemClockValue = UserOptions.CfgMemoryClockSelect; + for (Socket = 0; Socket < MAX_SOCKETS_SUPPORTED; Socket++) { + for (Channel = 0; Channel < MAX_CHANNELS_PER_SOCKET; Channel++) { + MemPtr->SocketList[Socket].ChannelPtr[Channel] = NULL; + MemPtr->SocketList[Socket].TimingsPtr[Channel] = NULL; + } + } + + // Memory Clear + RefPtr->EnableMemClr = TRUE; + + // TableBasedAlterations + RefPtr->TableBasedAlterations = NULL; + + // Platform config table + RefPtr->PlatformMemoryConfiguration = DefaultPlatformMemoryConfiguration; + + // Memory Restore + RefPtr->MemRestoreCtl = FALSE; + RefPtr->SaveMemContextCtl = FALSE; + AmdS3ParamsInitializer (&RefPtr->MemContext); + + // Dram Configuration + RefPtr->EnableBankIntlv = UserOptions.CfgMemoryEnableBankInterleaving; + RefPtr->EnableNodeIntlv = UserOptions.CfgMemoryEnableNodeInterleaving; + RefPtr->EnableChannelIntlv = UserOptions.CfgMemoryChannelInterleaving; + RefPtr->EnableBankSwizzle = UserOptions.CfgBankSwizzle; + RefPtr->EnableParity = UserOptions.CfgMemoryParityEnable; + RefPtr->EnableOnLineSpareCtl = UserOptions.CfgOnlineSpare; + + // Dram Power + RefPtr->EnablePowerDown = UserOptions.CfgMemoryPowerDown; + + // ECC + RefPtr->EnableEccFeature = UserOptions.CfgEnableEccFeature; +} +/*-----------------------------------------------------------------------------*/ +/** + * + * This function writes training pattern + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] Pattern[] - Pattern to write + * @param[in] Address - System Address [47:16] + * @param[in] ClCount - Number of cache lines + * + */ + +VOID +MemNWritePatternHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT32 Address, + IN UINT8 Pattern[], + IN UINT16 ClCount + ) +{ + Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr); + MemUWriteCachelines (Address, Pattern, ClCount); +} + +/*-----------------------------------------------------------------------------*/ +/** + * + * This function reads training pattern + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] Buffer[] - Buffer to fill + * @param[in] Address - System Address [47:16] + * @param[in] ClCount - Number of cache lines + * + */ + +VOID +MemNReadPatternHy ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 Buffer[], + IN UINT32 Address, + IN UINT16 ClCount + ) +{ + Address = MemUSetUpperFSbase (Address, NBPtr->MemPtr); + MemUReadCachelines (Buffer, Address, ClCount); +} +/* -----------------------------------------------------------------------------*/ +/** + * + * This function initiates DQS training for Server NB + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +BOOLEAN +memNEnableTrainSequenceHy ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + BOOLEAN Retval; + Retval = TRUE; + if (!MemNIsIdSupportedHy (NBPtr, &(NBPtr->MemPtr->DiesPerSystem[NBPtr->MCTPtr->NodeId].LogicalCpuid))) { + Retval = FALSE; + } + return Retval; +} + |