diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Mem/Feat/IDENDIMM/mfidendimm.c')
-rwxr-xr-x | src/vendorcode/amd/agesa/f12/Proc/Mem/Feat/IDENDIMM/mfidendimm.c | 537 |
1 files changed, 537 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/Feat/IDENDIMM/mfidendimm.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/Feat/IDENDIMM/mfidendimm.c new file mode 100755 index 0000000000..02f56309c7 --- /dev/null +++ b/src/vendorcode/amd/agesa/f12/Proc/Mem/Feat/IDENDIMM/mfidendimm.c @@ -0,0 +1,537 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mfidendimm.c + * + * Translate physical system address to dimm identification. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/Feat) + * @e \$Revision: 45911 $ @e \$Date: 2011-01-25 04:55:11 +0800 (Tue, 25 Jan 2011) $ + * + **/ +/***************************************************************************** +* +* Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* *************************************************************************** +* +*/ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "mm.h" +#include "mn.h" +#include "Ids.h" +#include "OptionMemory.h" +#include "heapManager.h" +#include "mfidendimm.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_MEM_FEAT_IDENDIMM_MFIDENDIMM_FILECODE +extern MEM_NB_SUPPORT memNBInstalled[]; + +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define MAX_DCTS_PER_DIE 2 ///< Max DCTs per die +#define MAX_CHLS_PER_DCT 1 ///< Max Channels per DCT + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +AGESA_STATUS +STATIC +MemFTransSysAddrToCS ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify, + IN MEM_MAIN_DATA_BLOCK *mmPtr + ); + +UINT32 +STATIC +MemFGetPCI ( + IN MEM_NB_BLOCK *NBPtr, + IN UINT8 NodeID, + IN UINT8 DctNum, + IN BIT_FIELD_NAME BitFieldName + ); + +UINT8 +STATIC +MemFUnaryXOR ( + IN UINT32 address + ); + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +/*-----------------------------------------------------------------------------*/ +/** +* +* This function identifies the dimm on which the given memory address locates. +* +* @param[in, out] *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM +* +* @retval AGESA_SUCCESS - Successfully translate physical system address +* to dimm identification. +* AGESA_BOUNDS_CHK - Targeted address is out of bound. +* +*/ + +AGESA_STATUS +AmdIdentifyDimm ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify + ) +{ + UINT8 i; + AGESA_STATUS RetVal; + MEM_MAIN_DATA_BLOCK mmData; // Main Data block + MEM_NB_BLOCK *NBPtr; + MEM_DATA_STRUCT MemData; + LOCATE_HEAP_PTR LocHeap; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + UINT8 Node; + UINT8 Dct; + UINT8 Die; + UINT8 DieCount; + + LibAmdMemCopy (&(MemData.StdHeader), &(AmdDimmIdentify->StdHeader), sizeof (AMD_CONFIG_PARAMS), &(AmdDimmIdentify->StdHeader)); + mmData.MemPtr = &MemData; + RetVal = MemSocketScan (&mmData); + if (RetVal == AGESA_FATAL) { + return RetVal; + } + DieCount = mmData.DieCount; + + // Search for AMD_MEM_AUTO_HANDLE on the heap first. + // Only apply for space on the heap if cannot find AMD_MEM_AUTO_HANDLE on the heap. + LocHeap.BufferHandle = AMD_MEM_AUTO_HANDLE; + if (HeapLocateBuffer (&LocHeap, &AmdDimmIdentify->StdHeader) == AGESA_SUCCESS) { + // NB block has already been constructed by main block. + // No need to construct it here. + NBPtr = (MEM_NB_BLOCK *)LocHeap.BufferPtr; + mmData.NBPtr = NBPtr; + } else { + AllocHeapParams.RequestedBufferSize = (DieCount * (sizeof (MEM_NB_BLOCK))); + AllocHeapParams.BufferHandle = AMD_MEM_AUTO_HANDLE; + AllocHeapParams.Persist = HEAP_SYSTEM_MEM; + if (HeapAllocateBuffer (&AllocHeapParams, &AmdDimmIdentify->StdHeader) != AGESA_SUCCESS) { + PutEventLog (AGESA_FATAL, MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK, 0, 0, 0, 0, &AmdDimmIdentify->StdHeader); + ASSERT(FALSE); // Could not allocate heap space for NB block for Identify DIMM + return AGESA_FATAL; + } + NBPtr = (MEM_NB_BLOCK *)AllocHeapParams.BufferPtr; + mmData.NBPtr = NBPtr; + // Construct each die. + for (Die = 0; Die < DieCount; Die ++) { + i = 0; + while (memNBInstalled[i].MemIdentifyDimmConstruct != 0) { + if (memNBInstalled[i].MemIdentifyDimmConstruct (&NBPtr[Die], &MemData, Die)) { + break; + } + i++; + }; + if (memNBInstalled[i].MemIdentifyDimmConstruct == 0) { + PutEventLog (AGESA_FATAL, MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM, Die, 0, 0, 0, &AmdDimmIdentify->StdHeader); + ASSERT(FALSE); // No Identify DIMM constructor found + return AGESA_FATAL; + } + } + } + + if ((RetVal = MemFTransSysAddrToCS (AmdDimmIdentify, &mmData)) == AGESA_SUCCESS) { + // Translate Node, DCT and Chip select number to Socket, Channel and Dimm number. + Node = AmdDimmIdentify->SocketId; + Dct = AmdDimmIdentify->MemChannelId; + AmdDimmIdentify->SocketId = MemData.DiesPerSystem[Node].SocketId; + AmdDimmIdentify->MemChannelId = NBPtr[Node].GetSocketRelativeChannel (&NBPtr[Node], Dct, 0); + AmdDimmIdentify->DimmId /= 2; + } + + return RetVal; +} + + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*-----------------------------------------------------------------------------*/ +/** +* +* This function translates the given physical system address to +* a node, channel select, chip select, bank, row, and column address. +* +* @param[in, out] *AmdDimmIdentify - Pointer to the parameter structure AMD_IDENTIFY_DIMM +* @param[in, out] *mmPtr - Pointer to the MEM_MAIN_DATA_BLOCK +* +* @retval AGESA_SUCCESS - The chip select address is found +* @retval AGESA_BOUNDS_CHK - Targeted address is out of bound. +* +*/ +AGESA_STATUS +STATIC +MemFTransSysAddrToCS ( + IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify, + IN MEM_MAIN_DATA_BLOCK *mmPtr + ) +{ + BOOLEAN CSFound; + BOOLEAN DctSelHiRngEn; + BOOLEAN DctSelIntLvEn; + BOOLEAN DctGangEn; + BOOLEAN HiRangeSelected; + BOOLEAN DramHoleValid; + BOOLEAN CSEn; + BOOLEAN SwapDone; + BOOLEAN IntLvRgnSwapEn; + UINT8 DctSelHi; + UINT8 DramEn; + UINT8 range; + UINT8 IntlvEn; + UINT8 IntlvSel; + UINT8 ILog; + UINT8 DctSelIntLvAddr; + UINT8 DctNum; + UINT8 cs; + UINT8 BadDramCs; + UINT8 spare; + UINT8 IntLvRgnBaseAddr; + UINT8 IntLvRgnLmtAddr; + UINT8 IntLvRgnSize; + UINT32 temp; + UINT32 DramHoleOffset; + UINT32 DramHoleBase; + UINT64 DramBase; + UINT64 DramLimit; + UINT64 DramLimitSysAddr; + UINT64 DctSelBaseAddr; + UINT64 DctSelBaseOffset; + UINT64 ChannelAddr; + UINT64 CSBase; + UINT64 CSMask; + UINT64 InputAddr; + UINT64 ChannelOffset; + MEM_NB_BLOCK *NBPtr; + + UINT64 SysAddr; + UINT8 *NodeID; + UINT8 *ChannelSelect; + UINT8 *ChipSelect; + + SysAddr = AmdDimmIdentify->MemoryAddress; + NodeID = &(AmdDimmIdentify->SocketId); + ChannelSelect = &(AmdDimmIdentify->MemChannelId); + ChipSelect = &(AmdDimmIdentify->DimmId); + CSFound = FALSE; + ILog = 0; + NBPtr = mmPtr->NBPtr; + + // Loop to determine the dram range + for (range = 0; range < mmPtr->DieCount; range ++) { + // DRAM Base + temp = MemFGetPCI (NBPtr, 0, 0, BFDramBaseReg0 + range); + DramEn = (UINT8) (temp & 0x3); + IntlvEn = (UINT8) ((temp >> 8) & 0x7); + + DramBase = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramBaseHiReg0 + range) & 0xFF) << 40) | + (((UINT64) temp & 0xFFFF0000) << 8); + + // DRAM Limit + temp = MemFGetPCI (NBPtr, 0, 0, BFDramLimitReg0 + range); + *NodeID = (UINT8) (temp & 0x7); + IntlvSel = (UINT8) ((temp >> 8) & 0x7); + DramLimit = ((UINT64) (MemFGetPCI (NBPtr, 0, 0, BFDramLimitHiReg0 + range) & 0xFF) << 40) | + (((UINT64) temp << 8) | 0xFFFFFF); + DramLimitSysAddr = (((UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDramLimitAddr)) << 27) | 0x7FFFFFF; + ASSERT (DramLimit <= DramLimitSysAddr); + + if ((DramEn != 0) && (DramBase <= SysAddr) && (SysAddr <= DramLimitSysAddr) && + ((IntlvEn == 0) || (IntlvSel == ((SysAddr >> 12) & IntlvEn)))) { + // Determine the number of bit positions consumed by Node Interleaving + switch (IntlvEn) { + + case 0x0: + ILog = 0; + break; + + case 0x1: + ILog = 1; + break; + + case 0x3: + ILog = 2; + break; + + case 0x7: + ILog = 3; + break; + + default: + IDS_ERROR_TRAP; + } + + DramHoleOffset = MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleOffset) << 23; + DramHoleValid = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleValid); + DramHoleBase = MemFGetPCI (NBPtr, *NodeID, 0, BFDramHoleBase) << 24; + // Address belongs to this node based on DramBase/Limit, + // but is in the memory hole so it doesn't map to DRAM + if (DramHoleValid && (DramHoleBase <= SysAddr) && (SysAddr < 0x100000000ull)) { + return AGESA_BOUNDS_CHK; + } + + // F2x10C Swapped Interleaved Region + IntLvRgnSwapEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSwapEn); + if (IntLvRgnSwapEn) { + IntLvRgnBaseAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnBaseAddr); + IntLvRgnLmtAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnLmtAddr); + IntLvRgnSize = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFIntLvRgnSize); + ASSERT (IntLvRgnSize == (IntLvRgnLmtAddr - IntLvRgnBaseAddr + 1)); + if (((SysAddr >> 34) == 0) && + ((((SysAddr >> 27) >= IntLvRgnBaseAddr) && ((SysAddr >> 27) <= IntLvRgnLmtAddr)) + || ((SysAddr >> 27) < IntLvRgnSize))) { + SysAddr ^= (UINT64) IntLvRgnBaseAddr << 27; + } + } + + // Extract variables from F2x110 DRAM Controller Select Low Register + DctSelHiRngEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHiRngEn); + DctSelHi = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelHi); + DctSelIntLvEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvEn); + DctGangEn = (BOOLEAN) MemFGetPCI (NBPtr, *NodeID, 0, BFDctGangEn); + DctSelIntLvAddr = (UINT8) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelIntLvAddr); + DctSelBaseAddr = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseAddr) << 27; + DctSelBaseOffset = (UINT64) MemFGetPCI (NBPtr, *NodeID, 0, BFDctSelBaseOffset) << 26; + + + // Determine if high DCT address range is being selected + if (DctSelHiRngEn && !DctGangEn && (SysAddr >= DctSelBaseAddr)) { + HiRangeSelected = TRUE; + } else { + HiRangeSelected = FALSE; + } + + // Determine Channel + if (DctGangEn) { + *ChannelSelect = (UINT8) ((SysAddr >> 3) & 0x1); + } else if (HiRangeSelected) { + *ChannelSelect = DctSelHi; + } else if (DctSelIntLvEn && (DctSelIntLvAddr == 0)) { + *ChannelSelect = (UINT8) ((SysAddr >> 6) & 0x1); + } else if (DctSelIntLvEn && (((DctSelIntLvAddr >> 1) & 0x1) != 0)) { + temp = MemFUnaryXOR ((UINT32) ((SysAddr >> 16) & 0x1F)); + if ((DctSelIntLvAddr & 0x1) != 0) { + *ChannelSelect = (UINT8) (((SysAddr >> 9) & 0x1) ^ temp); + } else { + *ChannelSelect = (UINT8) (((SysAddr >> 6) & 0x1) ^ temp); + } + } else if (DctSelIntLvEn) { + *ChannelSelect = (UINT8) ((SysAddr >> (12 + ILog)) & 0x1); + } else if (DctSelHiRngEn) { + *ChannelSelect = ~DctSelHi & 0x1; + } else { + *ChannelSelect = 0; + } + ASSERT (*ChannelSelect < NBPtr[*NodeID].DctCount); + + // Determine base address offset + if (HiRangeSelected) { + if ((DctSelBaseAddr < DramHoleBase) && DramHoleValid && (SysAddr >= 0x100000000ull)) { + ChannelOffset = (UINT64) DramHoleOffset; + } else { + ChannelOffset = DctSelBaseOffset; + } + } else { + if (DramHoleValid && (SysAddr >= 0x100000000ull)) { + ChannelOffset = (UINT64) DramHoleOffset; + } else { + ChannelOffset = DramBase; + } + } + + // Remove hoisting offset and normalize to DRAM bus addresses + ChannelAddr = SysAddr - ChannelOffset; + + // Remove node interleaving + if (IntlvEn != 0) { + ChannelAddr = ((ChannelAddr >> (12 + ILog)) << 12) | (ChannelAddr & 0xFFF); + } + + // Remove channel interleave + if (DctSelIntLvEn && !HiRangeSelected && !DctGangEn) { + if ((DctSelIntLvAddr & 1) != 1) { + // A[6] Select or Hash 6 + ChannelAddr = ((ChannelAddr >> 7) << 6) | (ChannelAddr & 0x3F); + } else if (DctSelIntLvAddr == 1) { + // A[12] + ChannelAddr = ((ChannelAddr >> 13) << 12) | (ChannelAddr & 0xFFF); + } else { + // Hash 9 + ChannelAddr = ((ChannelAddr >> 10) << 9) | (ChannelAddr & 0x1FF); + } + } + + // Determine the Chip Select + for (cs = 0; cs < MAX_CS_PER_CHANNEL; ++ cs) { + DctNum = DctGangEn ? 0 : *ChannelSelect; + + // Obtain the CS Base + temp = MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + cs); + CSEn = (BOOLEAN) (temp & 0x1); + CSBase = ((UINT64) temp & NBPtr->CsRegMsk) << 8; + + // Obtain the CS Mask + CSMask = ((UINT64) MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSMask0Reg + (cs >> 1)) & NBPtr->CsRegMsk) << 8; + + // Adjust the Channel Addr for easy comparison + InputAddr = ((ChannelAddr >> 8) & NBPtr->CsRegMsk) << 8; + + if (CSEn && ((InputAddr & ~CSMask) == (CSBase & ~CSMask))) { + CSFound = TRUE; + + *ChipSelect = cs; + + temp = MemFGetPCI (NBPtr, *NodeID, 0, BFOnLineSpareControl); + SwapDone = (BOOLEAN) ((temp >> (1 + 2 * (*ChannelSelect))) & 0x1); + BadDramCs = (UINT8) ((temp >> (4 + 4 * (*ChannelSelect))) & 0x7); + if (SwapDone && (cs == BadDramCs)) { + // Find the spare rank for the channel + for (spare = 0; spare < MAX_CS_PER_CHANNEL; ++spare) { + if ((MemFGetPCI (NBPtr, *NodeID, DctNum, BFCSBaseAddr0Reg + spare) & 0x2) != 0) { + *ChipSelect = spare; + break; + } + } + } + ASSERT (*ChipSelect < MAX_CS_PER_CHANNEL); + + break; + } + } + } + if (CSFound) { + break; + } + } + + // last ditch sanity check + ASSERT (!CSFound || ((*NodeID < mmPtr->DieCount) && (*ChannelSelect < NBPtr[*NodeID].DctCount) && (*ChipSelect < MAX_CS_PER_CHANNEL))); + if (CSFound) { + return AGESA_SUCCESS; + } else { + return AGESA_BOUNDS_CHK; + } + +} + + +/*-----------------------------------------------------------------------------*/ +/** +* +* This function is the interface to call the PCI register access function +* defined in NB block. +* +* @param[in] *NBPtr - Pointer to the parameter structure MEM_NB_BLOCK +* @param[in] NodeID - Node ID number of the target Northbridge +* @param[in] DctNum - DCT number if applicable, otherwise, put 0 +* @param[in] BitFieldName - targeted bitfield +* +* @retval UINT32 - 32 bits PCI register value +* +*/ +UINT32 +STATIC +MemFGetPCI ( + IN MEM_NB_BLOCK *NBPtr, + IN UINT8 NodeID, + IN UINT8 DctNum, + IN BIT_FIELD_NAME BitFieldName + ) +{ + MEM_NB_BLOCK *LocalNBPtr; + // Get the northbridge pointer for the targeted node. + LocalNBPtr = &NBPtr[NodeID]; + LocalNBPtr->FamilySpecificHook[DCTSelectSwitch] (LocalNBPtr, &DctNum); + LocalNBPtr->Dct = DctNum; + // The caller of this function will take care of the ganged/unganged situation. + // So Ganged is set to be false here, and do PCI read on the DCT specified by DctNum. + return LocalNBPtr->GetBitField (LocalNBPtr, BitFieldName); +} + +/*-----------------------------------------------------------------------------*/ +/** +* +* This function returns an even parity bit (making the total # of 1's even) +* {0, 1} = number of set bits in argument is {even, odd}. +* +* @param[in] address - the address on which the parity bit will be calculated +* +* @retval UINT8 - parity bit +* +*/ + +UINT8 +STATIC +MemFUnaryXOR ( + IN UINT32 address + ) +{ + UINT8 parity; + UINT8 index; + parity = 0; + for (index = 0; index < 32; ++ index) { + parity = (UINT8) (parity ^ (address & 0x1)); + address = address >> 1; + } + return parity; +} |