diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH')
-rw-r--r-- | src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/masph3.c | 259 | ||||
-rw-r--r-- | src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/mauPh3.c | 258 |
2 files changed, 0 insertions, 517 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/masph3.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/masph3.c deleted file mode 100644 index 6b5384e527..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/masph3.c +++ /dev/null @@ -1,259 +0,0 @@ -/* $NoKeywords:$ */ -/* - * @file - * - * masph3.c - * - * Platform specific settings for PH DDR3 SO-dimms - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/Ardk/PH) - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - **/ -/***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * *************************************************************************** - * - */ - -/* This file contains routine that add platform specific support S1g4 */ - - -#include "AGESA.h" -#include "mport.h" -#include "ma.h" -#include "OptionMemory.h" -#include "PlatformMemoryConfiguration.h" -#include "mu.h" -#include "Ids.h" -#include "cpuFamRegisters.h" -#include "Filecode.h" -CODE_GROUP (G2_PEI) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_MEM_ARDK_PH_MASPH3_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* - *----------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *----------------------------------------------------------------------------- - */ - -STATIC CONST UINT8 ROMDATA PhSDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; -// Even chip select maps to M[B,A]_CKE[0] -// Odd chip select maps to M[B,A]_CKE[1] -STATIC CONST UINT8 ROMDATA PhSDdr3CKETri[] = {0x55, 0xAA}; -// Bit 0: M[B,A]0_ODT[0] -// Bit 1: M[B,A]1_ODT[0] -// Bit 2: M[B,A]0_ODT[1] -// Bit 3: M[B,A]1_ODT[1] -STATIC CONST UINT8 ROMDATA PhSDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; -// Bit 0: M[B,A]0_CS_H/L[0] -// Bit 1: M[B,A]0_CS_H/L[1] -// Bit 2: M[B,A]0_CS_H/L[2] -// Bit 3: M[B,A]0_CS_H/L[3] -STATIC CONST UINT8 ROMDATA PhSDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; - -/* -----------------------------------------------------------------------------*/ -/** - * - * This is function sets the platform specific settings for PH DDR3 SO-dimms - * - * - * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE - * @param[in] SocketID Socket number - * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT - * - * @return AGESA_SUCCESS - * @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table - * @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table - * @return CurrentChannel->CKETriMap Points this pointer to RB ODT table - * @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table - * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC - * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte - * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel - * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel - * @return CurrentChannel->SlowMode Slow Mode - * - * - */ - -AGESA_STATUS -MemAGetPsCfgSPh3 ( - IN OUT MEM_DATA_STRUCT *MemData, - IN UINT8 SocketID, - IN OUT CH_DEF_STRUCT *CurrentChannel - ) -{ - STATIC CONST PSCFG_ENTRY PSCfg[] = { - {DDR800_FREQUENCY, 0xFF, 0x00000000, 0x00113222}, - {DDR1066_FREQUENCY, 0xFF, 0x00000000, 0x10113222}, - {DDR1333_FREQUENCY, 0xFF, 0x00000000, 0x20113222}, - }; - - STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { - {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, - {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, - {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} - }; - - UINT16 i; - UINT16 j; - UINT8 Loads; - UINT8 Dimms; - UINT16 Speed; - UINT32 AddrTmgCTL; - UINT32 DctOdcCtl; - UINT8 PhyWLODT[4]; - BOOLEAN SlowMode; - UINT8 MaxDimmPerCH; - UINT8 *DimmsPerChPtr; - UINT16 DIMMRankType; - UINT16 _DIMMRankType; - UINT8 DimmTpMatch; - - ASSERT (MemData != 0); - ASSERT (CurrentChannel != 0); - - AddrTmgCTL = 0; - DctOdcCtl = 0; - PhyWLODT[0] = 0x0F; - PhyWLODT[1] = 0x0F; - PhyWLODT[2] = 0x0F; - PhyWLODT[3] = 0x0F; - SlowMode = FALSE; // 1T - if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) { - return AGESA_UNSUPPORTED; - } - if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { - return AGESA_UNSUPPORTED; - } - if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) { - return AGESA_UNSUPPORTED; - } - // Prepare inputs - Loads = CurrentChannel->Loads; - Dimms = CurrentChannel->Dimms; - Speed = CurrentChannel->DCTPtr->Timings.Speed; - - DIMMRankType = MemAGetPsRankType (CurrentChannel); - - DimmsPerChPtr = FindPSOverrideEntry (MemData->ParameterListPtr->PlatformMemoryConfiguration, PSO_MAX_DIMMS, SocketID, CurrentChannel->ChannelID); - if (DimmsPerChPtr != NULL) { - MaxDimmPerCH = *DimmsPerChPtr; - } else { - MaxDimmPerCH = 2; - } - - for (i = 0; i < GET_SIZE_OF (PSCfg); i++) { - if (Speed == PSCfg[i].Speed) { - if (Loads <= PSCfg[i].Loads) { - AddrTmgCTL = PSCfg[i].AddrTmg; - DctOdcCtl = PSCfg[i].Odc; - break; - } - } - } - - // WL ODT - for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { - if (Dimms != PSCfgDIMMWlODT[i].Dimms) { - continue; - } - DimmTpMatch = 0; - _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; - for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { - if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { - DimmTpMatch++; - } - } - if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { - PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; - PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; - PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; - PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; - break; - } - } - - // - // Overrides and/or exceptions - // - if (MaxDimmPerCH == 2) { - if (Dimms == 2) { - DctOdcCtl = 0x20223323; - SlowMode = TRUE; - if (Speed == DDR800_FREQUENCY) { - AddrTmgCTL = 0x00000039; - } else if (Speed == DDR1066_FREQUENCY) { - AddrTmgCTL = 0x00000037; - } - } else { - DctOdcCtl = 0x20113222; - } - } else { - if (CurrentChannel->DimmSRPresent != 0) { - PhyWLODT[0] = 1; - } else if (CurrentChannel->DimmDrPresent != 0) { - PhyWLODT[0] = 4; - } - } - - CurrentChannel->MemClkDisMap = (UINT8 *) PhSDdr3CLKDis; - CurrentChannel->CKETriMap = (UINT8 *) PhSDdr3CKETri; - CurrentChannel->ODTTriMap = (UINT8 *) PhSDdr3ODTTri; - CurrentChannel->ChipSelTriMap = (UINT8 *) PhSDdr3CSTri; - - CurrentChannel->DctAddrTmg = AddrTmgCTL; - CurrentChannel->DctOdcCtl = DctOdcCtl; - for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { - CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; - } - CurrentChannel->SlowMode = SlowMode; - - return AGESA_SUCCESS; -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/mauPh3.c b/src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/mauPh3.c deleted file mode 100644 index 29f4e9c2da..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Mem/Ardk/PH/mauPh3.c +++ /dev/null @@ -1,258 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * mauph3.c - * - * Platform specific settings for PH DDR3 unbuffered dimms - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/Ardk/PH) - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - **/ -/***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * *************************************************************************** - * - */ - -/* This file contains routine that add platform specific support AM3 */ - - -#include "AGESA.h" -#include "mport.h" -#include "PlatformMemoryConfiguration.h" -#include "ma.h" -#include "Ids.h" -#include "cpuFamRegisters.h" -#include "Filecode.h" -CODE_GROUP (G2_PEI) -RDATA_GROUP (G2_PEI) - -#define FILECODE PROC_MEM_ARDK_PH_MAUPH3_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* - *----------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *----------------------------------------------------------------------------- - */ - -STATIC CONST UINT8 ROMDATA PhUDdr3CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; -// Even chip select maps to M[B,A]_CKE[0] -// Odd chip select maps to M[B,A]_CKE[1] -STATIC CONST UINT8 ROMDATA PhUDdr3CKETri[] = {0x55, 0xAA}; -// Bit 0: M[B,A]0_ODT[0] -// Bit 1: M[B,A]1_ODT[0] -// Bit 2: M[B,A]0_ODT[1] -// Bit 3: M[B,A]1_ODT[1] -STATIC CONST UINT8 ROMDATA PhUDdr3ODTTri[] = {0x01, 0x04, 0x02, 0x08}; -// Bit 0: M[B,A]0_CS_H/L[0] -// Bit 1: M[B,A]0_CS_H/L[1] -// Bit 2: M[B,A]0_CS_H/L[2] -// Bit 3: M[B,A]0_CS_H/L[3] -STATIC CONST UINT8 ROMDATA PhUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00}; - -/* -----------------------------------------------------------------------------*/ -/** - * - * This is function sets the platform specific settings for PH DDR3 unbuffered dimms - * - * - * @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE - * @param[in] SocketID Socket number - * @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT - * - * @return AGESA_SUCCESS - * @return CurrentChannel->MemClkDisMap Points this pointer to PH MemClkDis table - * @return CurrentChannel->ChipSelTriMap Points this pointer to PH CS table - * @return CurrentChannel->CKETriMap Points this pointer to PH ODT table - * @return CurrentChannel->ODTTriMap Points this pointer to PH CKE table - * @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC - * @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte - * @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel - * @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel - * @return CurrentChannel->SlowMode Slow Mode - * - */ - -AGESA_STATUS -MemAGetPsCfgUPh3 ( - IN OUT MEM_DATA_STRUCT *MemData, - IN UINT8 SocketID, - IN OUT CH_DEF_STRUCT *CurrentChannel - ) -{ - STATIC CONST PSCFG_ENTRY PSCfg1Dimm[] = { - {DDR800_FREQUENCY, 0x10, 0x003B0000, 0x20113222}, - {DDR1066_FREQUENCY, 0x10, 0x00380000, 0x20113222}, - {DDR1333_FREQUENCY, 0x10, 0x00360000, 0x20113222}, - {DDR1600_FREQUENCY, 0x10, 0x00340000, 0x20113222} - }; - STATIC CONST PSCFG_ENTRY PSCfg2Dimm[] = { - {DDR800_FREQUENCY, 0xFF, 0x00390039, 0x20223323}, - {DDR1066_FREQUENCY, 0xFF, 0x00350037, 0x20223323}, - {DDR1333_FREQUENCY, 0xFF, 0x00000035, 0x20223323}, - {DDR1600_FREQUENCY, 0xFF, 0x00000033, 0x20223323} - }; - - STATIC CONST ADV_R_PSCFG_WL_ODT_ENTRY PSCfgDIMMWlODT[] = { - {SR_DIMM0, {0x01, 0x00, 0x00, 0x00}, 1}, - {DR_DIMM0, {0x04, 0x00, 0x00, 0x00}, 1}, - {SR_DIMM1, {0x00, 0x02, 0x00, 0x00}, 1}, - {DR_DIMM1, {0x00, 0x08, 0x00, 0x00}, 1}, - {SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, {0x03, 0x03, 0x00, 0x00}, 2} - }; - - UINT16 i; - UINT16 j; - UINT8 Loads; - UINT8 Dimms; - UINT16 Speed; - UINT16 DIMMRankType; - UINT16 _DIMMRankType; - UINT32 AddrTmgCTL; - UINT32 DctOdcCtl; - UINT8 PhyWLODT[4]; - BOOLEAN SlowMode; - UINT8 DimmTpMatch; - - ASSERT (MemData != 0); - ASSERT (CurrentChannel != 0); - - AddrTmgCTL = 0; - DctOdcCtl = 0; - PhyWLODT[0] = 0x0F; - PhyWLODT[1] = 0x0F; - PhyWLODT[2] = 0x0F; - PhyWLODT[3] = 0x0F; - - if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_10_PH) == 0) { - return AGESA_UNSUPPORTED; - } - if (CurrentChannel->TechType != DDR3_TECHNOLOGY) { - return AGESA_UNSUPPORTED; - } - if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) { - return AGESA_UNSUPPORTED; - } - // Prepare inputs - Loads = CurrentChannel->Loads; - Dimms = CurrentChannel->Dimms; - Speed = CurrentChannel->DCTPtr->Timings.Speed; - DIMMRankType = MemAGetPsRankType (CurrentChannel); - - if ((Speed == DDR1333_FREQUENCY || Speed == DDR1600_FREQUENCY) && (Dimms == 2)) { - SlowMode = TRUE; // 2T - } else if ((Speed == DDR1600_FREQUENCY) && (Dimms == 1) && (Loads >= 16)) { - SlowMode = TRUE; // 2T - } else { - SlowMode = FALSE; // 1T - } - - if (Dimms == 1) { - for (i = 0; i < GET_SIZE_OF (PSCfg1Dimm); i++) { - if (Speed == PSCfg1Dimm[i].Speed) { - if (Loads >= PSCfg1Dimm[i].Loads) { - AddrTmgCTL = PSCfg1Dimm[i].AddrTmg; - DctOdcCtl = PSCfg1Dimm[i].Odc; - } else { - DctOdcCtl = 0x20113222; - } - break; - } - } - ASSERT (i < GET_SIZE_OF (PSCfg1Dimm)); - } else { - for (i = 0; i < GET_SIZE_OF (PSCfg2Dimm); i++) { - if (Speed == PSCfg2Dimm[i].Speed) { - if (Loads <= PSCfg2Dimm[i].Loads) { - AddrTmgCTL = PSCfg2Dimm[i].AddrTmg; - DctOdcCtl = PSCfg2Dimm[i].Odc; - break; - } - } - } - ASSERT (i < GET_SIZE_OF (PSCfg2Dimm)); - } - - // WL ODT - for (i = 0; i < GET_SIZE_OF (PSCfgDIMMWlODT); i++) { - if (Dimms != PSCfgDIMMWlODT[i].Dimms) { - continue; - } - DimmTpMatch = 0; - _DIMMRankType = DIMMRankType & PSCfgDIMMWlODT[i].DIMMRankType; - for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) { - if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) { - DimmTpMatch++; - } - } - if (DimmTpMatch == PSCfgDIMMWlODT[i].Dimms) { - PhyWLODT[0] = PSCfgDIMMWlODT[i].PhyWrLvOdt[0]; - PhyWLODT[1] = PSCfgDIMMWlODT[i].PhyWrLvOdt[1]; - PhyWLODT[2] = PSCfgDIMMWlODT[i].PhyWrLvOdt[2]; - PhyWLODT[3] = PSCfgDIMMWlODT[i].PhyWrLvOdt[3]; - break; - } - } - - CurrentChannel->MemClkDisMap = (UINT8 *) PhUDdr3CLKDis; - CurrentChannel->CKETriMap = (UINT8 *) PhUDdr3CKETri; - CurrentChannel->ODTTriMap = (UINT8 *) PhUDdr3ODTTri; - CurrentChannel->ChipSelTriMap = (UINT8 *) PhUDdr3CSTri; - - CurrentChannel->DctEccDqsLike = 0x0403; - CurrentChannel->DctEccDqsScale = 0x70; - CurrentChannel->DctAddrTmg = AddrTmgCTL; - CurrentChannel->DctOdcCtl = DctOdcCtl; - for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) { - CurrentChannel->PhyWLODT[i] = PhyWLODT[i]; - } - CurrentChannel->SlowMode = SlowMode; - - return AGESA_SUCCESS; -} |