diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/HT/htInterfaceNonCoherent.c')
-rwxr-xr-x | src/vendorcode/amd/agesa/f12/Proc/HT/htInterfaceNonCoherent.c | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/HT/htInterfaceNonCoherent.c b/src/vendorcode/amd/agesa/f12/Proc/HT/htInterfaceNonCoherent.c new file mode 100755 index 0000000000..21154bd1ce --- /dev/null +++ b/src/vendorcode/amd/agesa/f12/Proc/HT/htInterfaceNonCoherent.c @@ -0,0 +1,393 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * External Interface implementation for non-coherent features. + * + * Contains routines for accessing the interface to the client BIOS, + * for non-coherent features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: HyperTransport + * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "Topology.h" +#include "htFeat.h" +#include "htInterface.h" +#include "htInterfaceNonCoherent.h" +#include "htNb.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G1_PEICC) + +#define FILECODE PROC_HT_HTINTERFACENONCOHERENT_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define UNUSED_ZERO_32 ((UINT32)0) + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*----------------------------------------------------------------------------------------*/ +/** + * Get Manual BUID assignment list. + * + * @HtInterfaceMethod{::F_GET_MANUAL_BUID_SWAP_LIST} + * + * This routine is called every time a non-coherent chain is processed. BUID + * assignment may be controlled explicitly on a non-coherent chain. Swaps controls + * the BUID assignment and FinalIds provides the device to device Linking. Device + * orientation can be detected automatically, or explicitly. See documentation for + * more details. + * + * If a manual swap list is not supplied, automatic non-coherent init assigns BUIDs + * starting at 1 and incrementing sequentially based on each device's unit count. + * + * @param[in] Node The Node on which this chain is located + * @param[in] Link The Link on the host for this chain + * @param[out] List supply a pointer to a list. + * List is NOT valid unless routine returns TRUE. + * @param[in] State the input data + * + * @retval TRUE use a manual list + * @retval FALSE initialize the Link automatically + */ +BOOLEAN +GetManualBuidSwapList ( + IN UINT8 Node, + IN UINT8 Link, + OUT BUID_SWAP_LIST **List, + IN STATE_DATA *State + ) +{ + MANUAL_BUID_SWAP_LIST *p; + BOOLEAN result; + UINT8 Socket; + UINT8 PackageLink; + + ASSERT ((Node < MAX_NODES) && (List != NULL)); + + result = FALSE; + Socket = State->HtInterface->GetSocketFromMap (Node, State); + PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb); + + if (State->HtBlock->ManualBuidSwapList != NULL) { + p = State->HtBlock->ManualBuidSwapList; + + while (p->Socket != HT_LIST_TERMINAL) { + if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) && + ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) { + // Found a match implies TRUE, ignore the Link + result = TRUE; + *List = &(p->SwapList); + break; + } else { + p++; + } + } + } + // List is not valid if Result is FALSE. + return result; +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Override capabilities of a device. + * + * @HtInterfaceMethod{::F_GET_DEVICE_CAP_OVERRIDE} + * + * This routine is called once for every Link on every IO device. Update the width + * and frequency capability if needed for this device. This is used along with + * device capabilities, the limit call backs, and northbridge limits to compute the + * default settings. The components of the device's PCI config address are provided, + * so its settings can be consulted if need be. The input width and frequency are the + * reported device capabilities. + * + * @param[in] HostNode The Node on which this chain is located + * @param[in] HostLink The Link on the host for this chain + * @param[in] Depth The Depth in the I/O chain from the Host + * @param[in] PciAddress The Device's PCI config address (for callout) + * @param[in] DevVenId The Device's PCI Vendor + Device ID (offset 0x00) + * @param[in] Revision The Device's PCI Revision + * @param[in] Link The Device's Link number (0 or 1) + * @param[in,out] LinkWidthIn modify to change the Link Width In + * @param[in,out] LinkWidthOut modify to change the Link Width Out + * @param[in,out] FreqCap modify to change the Link's frequency capability + * @param[in,out] Clumping modify to change unit id clumping capability + * @param[in] State the input data and config header + * + */ +VOID +GetDeviceCapOverride ( + IN UINT8 HostNode, + IN UINT8 HostLink, + IN UINT8 Depth, + IN PCI_ADDR PciAddress, + IN UINT32 DevVenId, + IN UINT8 Revision, + IN UINT8 Link, + IN OUT UINT8 *LinkWidthIn, + IN OUT UINT8 *LinkWidthOut, + IN OUT UINT32 *FreqCap, + IN OUT UINT32 *Clumping, + IN STATE_DATA *State + ) +{ + DEVICE_CAP_OVERRIDE *p; + UINT8 HostSocket; + UINT8 PackageLink; + DEVICE_CAP_CALLOUT_PARAMS CalloutParams; + AGESA_STATUS CalloutStatus; + + ASSERT ((HostNode < MAX_NODES) && (Depth < 32) && ((Link == 0) || (Link == 1))); + + HostSocket = State->HtInterface->GetSocketFromMap (HostNode, State); + PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb); + + if (State->HtBlock->DeviceCapOverrideList != NULL) { + p = State->HtBlock->DeviceCapOverrideList; + + while (p->HostSocket != HT_LIST_TERMINAL) { + if (((p->HostSocket == HostSocket) || (p->HostSocket == HT_LIST_MATCH_ANY)) && + ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) && + ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY)) && + ((p->Link == Link) || (p->Link == HT_LIST_MATCH_ANY)) && + // Found a potential match. Check the additional optional matches. + ((p->Options.IsCheckDevVenId == 0) || (p->DevVenId == DevVenId)) && + ((p->Options.IsCheckRevision == 0) || (p->Revision == Revision))) { + // + // Found a match. Check what override actions are desired. + // Unlike the PCB limit routines, which handle the info returned, + // deviceCapOverride is actually overriding the settings, so we need + // to check that the field actually has an update. + // The Callout is a catch all for situations the data is not up to handling. + // It is expected, but not enforced, that either the data overrides are used, + // or the callout is used, rather than both. + // + if (p->Options.IsOverrideWidthIn != 0) { + *LinkWidthIn = p->LinkWidthIn; + } + if (p->Options.IsOverrideWidthOut != 0) { + *LinkWidthOut = p->LinkWidthOut; + } + if (p->Options.IsOverrideFreq != 0) { + *FreqCap = p->FreqCap; + } + if (p->Options.IsOverrideClumping != 0) { + *Clumping = p->Clumping; + } + if (p->Options.IsDoCallout != 0) { + // + // Pass the actual info being matched, not the matched struct data. + // This callout is expected to be built in as part of the options file, and does not use the + // callout interface, even though we use the consistent interface declaration for the routine. + // So, the first two int parameters have no meaning in this case. + // It is not meaningful for the callout to have any status but Success. + // + CalloutParams.HostSocket = HostSocket; + CalloutParams.HostLink = PackageLink; + CalloutParams.Depth = Depth; + CalloutParams.DevVenId = DevVenId; + CalloutParams.Revision = Revision; + CalloutParams.Link = Link; + CalloutParams.PciAddress = PciAddress; + CalloutParams.LinkWidthIn = LinkWidthIn; + CalloutParams.LinkWidthOut = LinkWidthOut; + CalloutParams.FreqCap = FreqCap; + CalloutParams.Clumping = Clumping; + CalloutParams.StdHeader = *((AMD_CONFIG_PARAMS *) (State->ConfigHandle)); + CalloutStatus = p->Callout (UNUSED_ZERO_32, UNUSED_ZERO_32, (VOID *) &CalloutParams); + ASSERT (CalloutStatus == AGESA_SUCCESS); + } + break; + } else { + p++; + } + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Get limits for non-coherent Links. + * + * @HtInterfaceMethod{::F_GET_IO_PCB_LIMITS} + * + * For each non-coherent connection this routine is called once. Update the + * frequency and width if needed for this Link (usually based on board restriction). + * This is used with device capabilities, device overrides, and northbridge limits to + * compute the default settings. The input width and frequency are valid, but do not + * necessarily reflect the minimum setting that will be chosen. + * + * @param[in] HostNode The Node on which this Link is located + * @param[in] HostLink The Link about to be initialized + * @param[in] Depth The Depth in the I/O chain from the Host + * @param[in,out] DownstreamLinkWidthLimit modify to change the Link Width In + * @param[in,out] UpstreamLinkWidthLimit modify to change the Link Width Out + * @param[in,out] PcbFreqCap modify to change the Link's frequency capability + * @param[in] State the input data + */ +VOID +GetIoPcbLimits ( + IN UINT8 HostNode, + IN UINT8 HostLink, + IN UINT8 Depth, + IN OUT UINT8 *DownstreamLinkWidthLimit, + IN OUT UINT8 *UpstreamLinkWidthLimit, + IN OUT UINT32 *PcbFreqCap, + IN STATE_DATA *State + ) +{ + IO_PCB_LIMITS *p; + UINT8 Socket; + UINT8 PackageLink; + + ASSERT ((HostNode < MAX_NODES) && (HostLink < MAX_NODES)); + + Socket = State->HtInterface->GetSocketFromMap (HostNode, State); + PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb); + + if (State->HtBlock->IoPcbLimitsList != NULL) { + p = State->HtBlock->IoPcbLimitsList; + + while (p->HostSocket != HT_LIST_TERMINAL) { + if (((p->HostSocket == Socket) || (p->HostSocket == HT_LIST_MATCH_ANY)) && + ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) && + ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY))) { + // Found a match, return the override info + *DownstreamLinkWidthLimit = p->DownstreamLinkWidthLimit; + *UpstreamLinkWidthLimit = p->UpstreamLinkWidthLimit; + *PcbFreqCap = p->PcbFreqCap; + break; + } else { + p++; + } + } + } +} + +/*----------------------------------------------------------------------------------------*/ +/** + * Manually control bus number assignment. + * + * @HtInterfaceMethod{::F_GET_OVERRIDE_BUS_NUMBERS} + * + * This routine is called every time a non-coherent chain is processed. If a system + * can not use the auto Bus numbering feature for non-coherent chain bus assignments, + * this routine can provide explicit control. For each chain, provide the bus number + * range to use. + * + * The outputs SecBus and SubBus are not valid unless this routine returns TRUE + * + * @param[in] Node The Node on which this chain is located + * @param[in] Link The Link on the host for this chain + * @param[out] SecBus Secondary Bus number for this non-coherent chain + * @param[out] SubBus Subordinate Bus number + * @param[in] State the input data + * + * @retval TRUE this routine is supplying the bus numbers. + * @retval FALSE use auto Bus numbering, bus outputs not valid. + */ +BOOLEAN +GetOverrideBusNumbers ( + IN UINT8 Node, + IN UINT8 Link, + OUT UINT8 *SecBus, + OUT UINT8 *SubBus, + IN STATE_DATA *State + ) +{ + OVERRIDE_BUS_NUMBERS *p; + BOOLEAN result; + UINT8 Socket; + UINT8 PackageLink; + + ASSERT ((Node < MAX_NODES) && (Link < MAX_NODES)); + + result = FALSE; + Socket = State->HtInterface->GetSocketFromMap (Node, State); + PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb); + + if (State->HtBlock->OverrideBusNumbersList != NULL) { + p = State->HtBlock->OverrideBusNumbersList; + + while (p->Socket != HT_LIST_TERMINAL) { + if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) && + ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) { + // Found a match, return the bus overrides + *SecBus = p->SecBus; + *SubBus = p->SubBus; + ASSERT (*SubBus > *SecBus); + result = TRUE; + break; + } else { + p++; + } + } + } + // SecBus, SubBus are not valid if Result is FALSE. + return result; +} + |