diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c')
| -rwxr-xr-x | src/vendorcode/amd/agesa/f12/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c | 681 |
1 files changed, 681 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c new file mode 100755 index 0000000000..6aefa35e1b --- /dev/null +++ b/src/vendorcode/amd/agesa/f12/Proc/Fch/Sata/Family/Hudson2/Hudson2SataService.c @@ -0,0 +1,681 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Graphics Controller family specific service procedure + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 48230 $ @e \$Date: 2011-03-05 06:55:12 +0800 (Sat, 05 Mar 2011) $ + * + */ + +/* +***************************************************************************** +* +* Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* *************************************************************************** +*/ + + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ +#include "FchPlatform.h" +#include "Filecode.h" +#define FILECODE PROC_FCH_SATA_FAMILY_HUDSON2_HUDSON2SATASERVICE_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +UINT8 NumOfSataPorts = 8; + +/** + * FchSataGpioInitial - Sata GPIO function Procedure + * + * - Private function + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +FchSataGpioInitial ( + IN VOID *FchDataPtr + ) +{ + UINT32 Bar5; + UINT32 FchSataBarRegDword; + UINT32 EMb; + UINT32 SataGpioVariableDword; + UINT8 FchSataSgpio0; + FCH_DATA_BLOCK *LocalCfgPtr; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + + Bar5 = 0; + EMb = 0; + FchSataSgpio0 = (UINT8) LocalCfgPtr->Sata.SataSgpio0; + + SataBar5setting (LocalCfgPtr, &Bar5); + ReadMem (Bar5 + FCH_SATA_BAR5_REG1C , AccessWidth32, &FchSataBarRegDword); + EMb = (Bar5 + (( FchSataBarRegDword & 0xFFFF0000) >> 14)); + + if ( EMb ) { + SataGpioVariableDword = 0x03040C00; + WriteMem ( Bar5 + EMb, AccessWidth32, &SataGpioVariableDword); + SataGpioVariableDword = 0x00C08240; + WriteMem ( Bar5 + EMb + 4, AccessWidth32, &SataGpioVariableDword); + SataGpioVariableDword = 0x00000001; + WriteMem ( Bar5 + EMb + 8, AccessWidth32, &SataGpioVariableDword); + + if ( FchSataSgpio0 ) { + SataGpioVariableDword = 0x00000060; + } else { + SataGpioVariableDword = 0x00000061; + } + + WriteMem ( Bar5 + EMb + 0x0C, AccessWidth32, &SataGpioVariableDword); + RwMem ((Bar5 + FCH_SATA_BAR5_REG20), AccessWidth16, ~(BIT8), BIT8); + + do { + ReadMem (Bar5 + FCH_SATA_BAR5_REG20 , AccessWidth32, &FchSataBarRegDword); + FchSataBarRegDword = FchSataBarRegDword & BIT8; + } while ( FchSataBarRegDword != 0 ); + + SataGpioVariableDword = 0x03040F00; + WriteMem ( Bar5 + EMb, AccessWidth32, &SataGpioVariableDword); + SataGpioVariableDword = 0x00008240; + WriteMem ( Bar5 + EMb + 4, AccessWidth32, &SataGpioVariableDword); + SataGpioVariableDword = 0x00000002; + WriteMem ( Bar5 + EMb + 8, AccessWidth32, &SataGpioVariableDword); + SataGpioVariableDword = 0x00800000; + WriteMem ( Bar5 + EMb + 0x0C, AccessWidth32, &SataGpioVariableDword); + SataGpioVariableDword = 0x0F003700; + WriteMem ( Bar5 + EMb + 0x0C, AccessWidth32, &SataGpioVariableDword); + RwMem ((Bar5 + FCH_SATA_BAR5_REG20), AccessWidth16, ~(BIT8), BIT8); + + do { + ReadMem (Bar5 + FCH_SATA_BAR5_REG20 , AccessWidth32, &FchSataBarRegDword); + FchSataBarRegDword = FchSataBarRegDword & BIT8; + } while ( FchSataBarRegDword != 0 ); + } +} + +/** + * FchInitMidProgramSataRegs - Sata Pci Configuration Space + * register setting + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +FchInitMidProgramSataRegs ( + IN VOID *FchDataPtr + ) +{ + UINT8 FchSataMsiCapability; + UINT8 FchSataTargetSupport8Device; + UINT8 FchSataDisableGenericMode; + UINT8 FchSataSgpio0; + UINT8 FchSataSgpio1; + UINT8 FchSataPhyPllShutDown; + FCH_DATA_BLOCK *LocalCfgPtr; + AMD_CONFIG_PARAMS *StdHeader; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + StdHeader = LocalCfgPtr->StdHeader; + + FchSataMsiCapability = (UINT8) LocalCfgPtr->Sata.SataMsiCapability; + FchSataTargetSupport8Device = (UINT8) LocalCfgPtr->Sata.SataTargetSupport8Device; + FchSataDisableGenericMode = (UINT8) LocalCfgPtr->Sata.SataDisableGenericMode; + FchSataSgpio0 = (UINT8) LocalCfgPtr->Sata.SataSgpio0; + FchSataSgpio1 = (UINT8) LocalCfgPtr->Sata.SataSgpio1; + FchSataPhyPllShutDown = (UINT8) LocalCfgPtr->Sata.SataPhyPllShutDown; + + // + // Enabled SATA MSI capability + // SATA MSI and D3 Power State Capability + // + if ( FchSataMsiCapability ) { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG34), AccessWidth8, 0, 0x50, StdHeader); + } else { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG34), AccessWidth8, 0, 0x70, StdHeader); + } + + // + // Disable SATA FLR Capability + // + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG70), AccessWidth16, 0x00FF, 0x00, StdHeader); + + // + // Sata Target Support 8 devices function + // + if ( FchSataTargetSupport8Device ) { + RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGDA, AccessWidth16, ~BIT12, BIT12); + } else { + RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGDA, AccessWidth16, ~BIT12, 0x00); + } + + // + // Sata Generic Mode setting + // + if ( FchSataDisableGenericMode ) { + RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGDA, AccessWidth16, ~BIT13, BIT13); + } else { + RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGDA, AccessWidth16, ~BIT13, 0x00); + } + + // + // Sata GPIO Initial + // + if ( FchSataSgpio0 ) { + FchSataGpioInitial ( LocalCfgPtr ); + } + + if ( FchSataSgpio1 ) { + FchSataGpioInitial ( LocalCfgPtr ); + } + + // + // Sata Phy Pll Shutdown setting + // + if ( FchSataPhyPllShutDown ) { + RwPci (((SATA_BUS_DEV_FUN << 16) + 0x87), AccessWidth8, ~(BIT6), BIT6, StdHeader); + } else { + RwPci (((SATA_BUS_DEV_FUN << 16) + 0x87), AccessWidth8, ~(BIT6), 0x00, StdHeader); + } + + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG4C), AccessWidth32, (UINT32) (~ (0x3f << 26)), (UINT32) (0x3f << 26), StdHeader); + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG48), AccessWidth32, (UINT32) (~ (0x01 << 11)), (UINT32) (0x01 << 11), StdHeader); + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG84), AccessWidth32, (UINT32) (~ (0x01 << 31)), (UINT32) (0x00 << 31), StdHeader); +} + + +/** + * FchInitLateProgramSataRegs - Sata Pci Configuration Space + * register setting + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +FchInitLateProgramSataRegs ( + IN VOID *FchDataPtr + ) +{ + UINT8 PortNumByte; + UINT32 Bar5; + FCH_DATA_BLOCK *LocalCfgPtr; + AMD_CONFIG_PARAMS *StdHeader; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + StdHeader = LocalCfgPtr->StdHeader; + + SataBar5setting (LocalCfgPtr, &Bar5); + // + //Clear error status + // + RwMem ((Bar5 + FCH_SATA_BAR5_REG130), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + RwMem ((Bar5 + FCH_SATA_BAR5_REG1B0), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + RwMem ((Bar5 + FCH_SATA_BAR5_REG230), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + RwMem ((Bar5 + FCH_SATA_BAR5_REG2B0), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + RwMem ((Bar5 + FCH_SATA_BAR5_REG330), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + RwMem ((Bar5 + FCH_SATA_BAR5_REG3B0), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + RwMem ((Bar5 + FCH_SATA_BAR5_REG430), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + RwMem ((Bar5 + FCH_SATA_BAR5_REG4B0), AccessWidth32, 0xFFFFFFFF, 0xFFFFFFFF); + + for ( PortNumByte = 0; PortNumByte < MAX_SATA_PORTS; PortNumByte++ ) { + RwMem ((Bar5 + 0x110 + (PortNumByte * 0x80)), AccessWidth32, 0xFFFFFFFF, 0x00); + } +} + +/** + * sataBar5RegSet - Sata Bar5 register setting + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +SataBar5RegSet ( + IN VOID *FchDataPtr + ) +{ + UINT32 AndMaskDword; + UINT32 OrMaskDword; + UINT32 Bar5; + UINT8 EfuseByte; + UINT8 FchSataAggrLinkPmCap; + UINT8 FchSataPortMultCap; + UINT8 FchSataPscCap; + UINT8 FchSataSscCap; + UINT8 FchSataFisBasedSwitching; + UINT8 FchSataCccSupport; + UINT8 FchSataAhciEnclosureManagement; + FCH_DATA_BLOCK *LocalCfgPtr; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + + FchSataAggrLinkPmCap = (UINT8) LocalCfgPtr->Sata.SataAggrLinkPmCap; + FchSataPortMultCap = (UINT8) LocalCfgPtr->Sata.SataPortMultCap; + FchSataPscCap = (UINT8) LocalCfgPtr->Sata.SataPscCap; + FchSataSscCap = (UINT8) LocalCfgPtr->Sata.SataSscCap; + FchSataFisBasedSwitching = (UINT8) LocalCfgPtr->Sata.SataFisBasedSwitching; + FchSataCccSupport = (UINT8) LocalCfgPtr->Sata.SataCccSupport; + FchSataAhciEnclosureManagement = (UINT8) LocalCfgPtr->Sata.SataAhciEnclosureManagement; + + AndMaskDword = 0; + OrMaskDword = 0; + Bar5 = 0; + + SataBar5setting (LocalCfgPtr, &Bar5); + EfuseByte = SATA_FIS_BASE_EFUSE_LOC; + GetEfuseStatus (&EfuseByte, LocalCfgPtr->StdHeader); + + if ( !FchSataPortMultCap ) { + AndMaskDword |= BIT12; + } + + if ( FchSataAggrLinkPmCap ) { + OrMaskDword |= BIT11; + } else { + AndMaskDword |= BIT11; + } + + if ( FchSataPscCap ) { + OrMaskDword |= BIT1; + } else { + AndMaskDword |= BIT1; + } + + if ( FchSataSscCap ) { + OrMaskDword |= BIT26; + } else { + AndMaskDword |= BIT26; + } + + if ( FchSataFisBasedSwitching ) { + if (EfuseByte & BIT1) { + AndMaskDword |= BIT10; + } else { + OrMaskDword |= BIT10; + } + } else { + AndMaskDword |= BIT10; + } + + // + // Disabling CCC (Command Completion Coalescing) support. + // + if ( FchSataCccSupport ) { + OrMaskDword |= BIT19; + } else { + AndMaskDword |= BIT19; + } + + if ( FchSataAhciEnclosureManagement ) { + OrMaskDword |= BIT27; + } else { + AndMaskDword |= BIT27; + } + + RwMem ((Bar5 + FCH_SATA_BAR5_REGFC), AccessWidth32, ~AndMaskDword, OrMaskDword); + + // + // SATA ESP port setting + // These config bits are set for SATA driver to identify which ports are external SATA ports and need to + // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will + // not enable power management (HIPM & DIPM) for these ports. + // + if ( LocalCfgPtr->Sata.SataEspPort.SataPortReg != 0 ) { + RwMem ((Bar5 + FCH_SATA_BAR5_REGF8), AccessWidth32, ~(LocalCfgPtr->Sata.SataEspPort.SataPortReg), 0); + RwMem ((Bar5 + FCH_SATA_BAR5_REGF8), AccessWidth32, 0xFF00FF00, (LocalCfgPtr->Sata.SataEspPort.SataPortReg << 16)); + // + // External SATA Port Indication Registers + // If any of the ports was programmed as an external port, HCAP.SXS should also be set + // + RwMem ((Bar5 + FCH_SATA_BAR5_REGFC), AccessWidth32, ~(BIT20), BIT20); + } else { + // + // External SATA Port Indication Registers + // If any of the ports was programmed as an external port, HCAP.SXS should also be set (Clear for no ESP port) + // + RwMem ((Bar5 + FCH_SATA_BAR5_REGF8), AccessWidth32, 0xFF00FF00, 0x00); + RwMem ((Bar5 + FCH_SATA_BAR5_REGFC), AccessWidth32, ~(BIT20), 0x00); + } + + if ( FchSataFisBasedSwitching ) { + if (EfuseByte & BIT1) { + RwMem ((Bar5 + FCH_SATA_BAR5_REGF8), AccessWidth32, 0x00FFFFFF, 0x00); + } else { + RwMem ((Bar5 + FCH_SATA_BAR5_REGF8), AccessWidth32, 0x00FFFFFF, 0xFF000000); + } + } else { + RwMem ((Bar5 + FCH_SATA_BAR5_REGF8), AccessWidth32, 0x00FFFFFF, 0x00); + } + + if ( LocalCfgPtr->Sata.BiosOsHandOff == 1 ) { + RwMem ((Bar5 + FCH_SATA_BAR5_REG24), AccessWidth8, ~BIT0, BIT0); + } else { + RwMem ((Bar5 + FCH_SATA_BAR5_REG24), AccessWidth8, ~BIT0, 0x00); + } +} + +/** + * FchSataSetDeviceNumMsi - Program Sata controller support + * device number cap & MSI cap + * + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +FchSataSetDeviceNumMsi ( + IN VOID *FchDataPtr + ) +{ + UINT32 Bar5; + FCH_DATA_BLOCK *LocalCfgPtr; + AMD_CONFIG_PARAMS *StdHeader; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + StdHeader = LocalCfgPtr->StdHeader; + + Bar5 = 0; + SataBar5setting (LocalCfgPtr, &Bar5); + // + // RAID or AHCI + // + if (LocalCfgPtr->Sata.SataMode.IdeEnable == DISABLED) { + // + // IDE2 Controller is enabled + // + if (LocalCfgPtr->Sata.SataMode.Sata6AhciCap == ENABLED) { + // + // 6 AHCI mode + // + RwMem ((Bar5 + FCH_SATA_BAR5_REG0C), AccessWidth8, 0x00, 0x3F); + RwMem ((Bar5 + FCH_SATA_BAR5_REG00), AccessWidth8, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT0); + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG50 + 2), AccessWidth8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1, StdHeader); + RwMem ((Bar5 + FCH_SATA_BAR5_REGFC), AccessWidth8, 0x07, 0x30); + } else { + RwMem ((Bar5 + FCH_SATA_BAR5_REG0C), AccessWidth8, 0x00, 0x0F); + if ( LocalCfgPtr->Sata.SataCccSupport ) { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG50 + 2), AccessWidth8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1, StdHeader); + RwMem ((Bar5 + FCH_SATA_BAR5_REGFC), AccessWidth8, 0x07, 0x20); + } else { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG50 + 2), AccessWidth8, ~(BIT3 + BIT2 + BIT1), BIT2, StdHeader); + } + } + } else { + // + // IDE2 Controller is disabled + // + RwMem ((Bar5 + FCH_SATA_BAR5_REG00), AccessWidth8, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT1 + BIT0); + RwMem ((Bar5 + FCH_SATA_BAR5_REG0C), AccessWidth8, 0x00, 0xFF); + if ( LocalCfgPtr->Sata.SataCccSupport ) { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG50 + 2), AccessWidth8, ~(BIT3 + BIT2 + BIT1), BIT3, StdHeader); + RwMem ((Bar5 + FCH_SATA_BAR5_REGFC), AccessWidth8, 0x07, 0x40); + } else { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG50 + 2), AccessWidth8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1, StdHeader); + } + } +} + + +/** + * FchSataDriveDetection - Sata drive detection + * + * - Sata Ide & Sata Ide to Ahci only + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * @param[in] *Bar5Ptr Sata BAR5 base address. + * + */ +VOID +FchSataDriveDetection ( + IN VOID *FchDataPtr, + IN UINT32 *Bar5Ptr + ) +{ + UINT32 SataBarInfo; + UINT8 PortNumByte; + UINT8 SataPortType; + UINT16 IoBaseWord; + UINT16 SataLoopVarWord; + FCH_DATA_BLOCK *LocalCfgPtr; + AMD_CONFIG_PARAMS *StdHeader; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + StdHeader = LocalCfgPtr->StdHeader; + + for ( PortNumByte = 0; PortNumByte < 4; PortNumByte++ ) { + + ReadMem (*Bar5Ptr + FCH_SATA_BAR5_REG128 + PortNumByte * 0x80, AccessWidth32, &SataBarInfo); + + if ( ( SataBarInfo & 0x0F ) == 0x03 ) { + if ( PortNumByte & BIT0 ) { + // + //this port belongs to secondary channel + // + ReadPci (((UINT32) (SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG18), AccessWidth16, &IoBaseWord, StdHeader); + } else { + // + //this port belongs to primary channel + // + ReadPci (((UINT32) (SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG10), AccessWidth16, &IoBaseWord, StdHeader); + } + + // + //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them + // + if ( LocalCfgPtr->Sata.SataClass == SataLegacyIde ) { + IoBaseWord = ( (0x170) | ((UINT16) ( (~((UINT8) (PortNumByte & BIT0) << 7)) & 0x80 )) ); + } + + if ( PortNumByte & BIT1 ) { + // + //this port is slave + // + SataPortType = 0xB0; + } else { + // + //this port is master + // + SataPortType = 0xA0; + } + + IoBaseWord &= 0xFFF8; + LibAmdIoWrite (AccessWidth8, IoBaseWord + 6, &SataPortType, StdHeader); + + // + //Wait in loop for 30s for the drive to become ready + // + for ( SataLoopVarWord = 0; SataLoopVarWord < 300000; SataLoopVarWord++ ) { + LibAmdIoRead (AccessWidth8, IoBaseWord + 7, &SataPortType, StdHeader); + if ( (SataPortType & 0x88) == 0 ) { + break; + } + FchStall (100, StdHeader); + } + } + } +} + +/** + * FchShutdownUnconnectedSataPortClock - Shutdown unconnected + * Sata port clock + * + * - Sata Ide & Sata Ide to Ahci only + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * @param[in] Bar5 Sata BAR5 base address. + * + */ +VOID +FchShutdownUnconnectedSataPortClock ( + IN VOID *FchDataPtr, + IN UINT32 Bar5 + ) +{ + UINT8 PortNumByte; + UINT8 PortSataStatusByte; + UINT8 NumOfPorts; + UINT8 FchSataClkAutoOff; + FCH_DATA_BLOCK *LocalCfgPtr; + AMD_CONFIG_PARAMS *StdHeader; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + StdHeader = LocalCfgPtr->StdHeader; + FchSataClkAutoOff = (UINT8) LocalCfgPtr->Sata.SataClkAutoOff; + + NumOfPorts = 0; + // + // Enable SATA auto clock control by default + // + for ( PortNumByte = 0; PortNumByte < MAX_SATA_PORTS; PortNumByte++ ) { + ReadMem (Bar5 + FCH_SATA_BAR5_REG128 + (PortNumByte * 0x80), AccessWidth8, &PortSataStatusByte); + // + // Shutdown the clock for the port and do the necessary port reporting changes. + // Error port status should be 1 not 3 + // + if ( ((PortSataStatusByte & 0x0F) != 0x03) && (! ((LocalCfgPtr->Sata.SataEspPort.SataPortReg) & (1 << PortNumByte))) ) { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG40 + 2), AccessWidth8, 0xFF, (1 << PortNumByte), StdHeader); + RwMem (Bar5 + FCH_SATA_BAR5_REG0C, AccessWidth8, ~(1 << PortNumByte), 00); + } + } ///end of for (PortNumByte=0;PortNumByte<6;PortNumByte++) + + ReadMem (Bar5 + FCH_SATA_BAR5_REG0C, AccessWidth8, &PortSataStatusByte); + + // + //if all ports are in disabled state, report at least one port + // + if ( (PortSataStatusByte & 0xFF) == 0) { + RwMem (Bar5 + FCH_SATA_BAR5_REG0C, AccessWidth8, (UINT32) ~(0xFF), 01); + } + + ReadMem (Bar5 + FCH_SATA_BAR5_REG0C, AccessWidth8, &PortSataStatusByte); + + for (PortNumByte = 0; PortNumByte < MAX_SATA_PORTS; PortNumByte ++) { + if (PortSataStatusByte & (1 << PortNumByte)) { + NumOfPorts++; + } + } + + if ( NumOfPorts == 0) { + NumOfPorts = 0x01; + } + + RwMem (Bar5 + FCH_SATA_BAR5_REG00, AccessWidth8, 0xE0, NumOfPorts - 1); +} + +/** + * FchSataSetPortGenMode - Set Sata port mode (each) for + * Gen1/Gen2/Gen3 + * + * + * @param[in] FchDataPtr Fch configuration structure pointer. + * + */ +VOID +FchSataSetPortGenMode ( + IN VOID *FchDataPtr + ) +{ + UINT32 Bar5; + UINT8 PortNumByte; + UINT8 PortModeByte; + UINT16 SataPortMode; + BOOLEAN FchSataHotRemovalEnh; + FCH_DATA_BLOCK *LocalCfgPtr; + AMD_CONFIG_PARAMS *StdHeader; + + LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; + StdHeader = LocalCfgPtr->StdHeader; + + FchSataHotRemovalEnh = LocalCfgPtr->Sata.SataHotRemovalEnh; + + SataBar5setting (LocalCfgPtr, &Bar5); + SataPortMode = (UINT16)LocalCfgPtr->Sata.SataPortMd.SataPortMode; + PortNumByte = 0; + + while ( PortNumByte < 8 ) { + PortModeByte = (UINT8) (SataPortMode & 3); + if ( (PortModeByte == BIT0) || (PortModeByte == BIT1) ) { + if ( PortModeByte == BIT0 ) { + // + // set GEN 1 + // + RwMem (Bar5 + FCH_SATA_BAR5_REG12C + PortNumByte * 0x80, AccessWidth8, 0x0F, 0x10); + } + + if ( PortModeByte == BIT1 ) { + // + // set GEN2 (default is GEN3) + // + RwMem (Bar5 + FCH_SATA_BAR5_REG12C + PortNumByte * 0x80, AccessWidth8, 0x0F, 0x20); + } + + RwMem (Bar5 + FCH_SATA_BAR5_REG12C + PortNumByte * 0x80, AccessWidth8, 0xFF, 0x01); + } + + SataPortMode >>= 2; + PortNumByte ++; + } + + FchStall (1000, StdHeader); + SataPortMode = (UINT16)LocalCfgPtr->Sata.SataPortMd.SataPortMode; + PortNumByte = 0; + + while ( PortNumByte < 8 ) { + PortModeByte = (UINT8) (SataPortMode & 3); + + if ( (PortModeByte == BIT0) || (PortModeByte == BIT1) ) { + RwMem (Bar5 + FCH_SATA_BAR5_REG12C + PortNumByte * 0x80, AccessWidth8, 0xFE, 0x00); + } + + PortNumByte ++; + SataPortMode >>= 2; + } + + // + // Sata Hot Removal Enhance setting + // + if ( FchSataHotRemovalEnh ) { + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG80), AccessWidth16, ~BIT8, BIT8, StdHeader); + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REGA8), AccessWidth16, ~BIT0, BIT0, StdHeader); + RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG80), AccessWidth16, ~BIT8, 0, StdHeader); + } +} + |