diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtsdi3.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtsdi3.c | 521 |
1 files changed, 0 insertions, 521 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtsdi3.c b/src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtsdi3.c deleted file mode 100644 index f938413a29..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtsdi3.c +++ /dev/null @@ -1,521 +0,0 @@ -/** - * @file - * - * mtsdi3.c - * - * Technology Software DRAM Init for DDR3 - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/Tech/DDR3) - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "Ids.h" -#include "mm.h" -#include "mn.h" -#include "mu.h" -#include "mt.h" -#include "mt3.h" -#include "mtsdi3.h" -#include "mtrci3.h" -#include "merrhdl.h" -#include "Filecode.h" -#define FILECODE PROC_MEM_TECH_DDR3_MTSDI3_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -VOID -STATIC -MemTEMRS33 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ); - -VOID -STATIC -MemTMRS3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ); - - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - - - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function initiates software DRAM init for both DCTs - * at the same time. - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - */ - -BOOLEAN -MemTDramInitSw3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 Dct; - UINT8 ChipSel; - UINT32 Dummy; - - MEM_DATA_STRUCT *MemPtr; - DIE_STRUCT *MCTPtr; - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - MemPtr = NBPtr->MemPtr; - MCTPtr = NBPtr->MCTPtr; - - IDS_HDT_CONSOLE ("!\nStart Dram Init\n"); - // 3.Program F2x[1,0]7C[EnDramInit]=1 - IDS_HDT_CONSOLE ("\tEnDramInit = 1 for both DCTs\n"); - NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 1); - NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE); - - // 4.wait 200us - MemUWait10ns (20000, MemPtr); - - // 5.Program F2x[1, 0]7C[DeassertMemRstX] = 1. - NBPtr->BrdcstSet (NBPtr, BFDeassertMemRstX, 1); - - // 6.wait 500us - MemUWait10ns (50000, MemPtr); - - // Do Phy Fence training before sending MRS commands - if (!NBPtr->IsSupported[FenceTrnBeforeDramInit]) { - AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader)); - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - NBPtr->SwitchDCT (NBPtr, Dct); - if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { - IDS_HDT_CONSOLE ("!\tDct %d\n", Dct); - NBPtr->PhyFenceTraining (NBPtr); - } - } - } - - // 7.NOP or deselect & take CKE high - NBPtr->BrdcstSet (NBPtr, BFAssertCke, 1); - - // 8.wait 360ns - MemUWait10ns (36, MemPtr); - - // The following steps are performed once for each channel with unbuffered DIMMs - // and once for each chip select on registered DIMMs: - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - NBPtr->SwitchDCT (NBPtr, Dct); - if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { - IDS_HDT_CONSOLE ("!\tDct %d\n", Dct); - // The following steps are performed with registered DIMMs only and - // must be done for each chip select pair: - if (MCTPtr->Status[SbRegistered]) { - MemTDramControlRegInit3 (TechPtr); - } - - for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) { - if (NBPtr->GetSysAddr (NBPtr, ChipSel, &Dummy)) { - IDS_HDT_CONSOLE ("!\t\tCS %d\n", ChipSel); - // if chip select present - MemTSendAllMRCmds3 (TechPtr, ChipSel); - // NOTE: wait 512 clocks for DLL-relock - MemUWait10ns (50000, NBPtr->MemPtr); // wait 500us - if (!MCTPtr->Status[SbRegistered]) { - break; - } - } - } - - // 17.Send two ZQCL commands (to even then odd chip select) - NBPtr->sendZQCmd (NBPtr); - NBPtr->sendZQCmd (NBPtr); - } - } - - // 18.Program F2x[1,0]7C[EnDramInit]=0 - NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 0); - NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE); - // - // For Unbuffered Dimms, Issue MRS for remaining CS without EnDramInit - // - if (!MCTPtr->Status[SbRegistered]) { - for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { - NBPtr->SwitchDCT (NBPtr, Dct); - if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { - IDS_HDT_CONSOLE ("!\tDct %d\n", Dct); - for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) { - if (NBPtr->GetSysAddr (NBPtr, ChipSel, &Dummy)) { - IDS_HDT_CONSOLE ("!\t\tCS %d\n", ChipSel); - // if chip select present - MemTSendAllMRCmds3 (TechPtr, ChipSel); - // NOTE: wait 512 clocks for DLL-relock - MemUWait10ns (50000, NBPtr->MemPtr); // wait 500us - } - } - } - } - } - - - IDS_HDT_CONSOLE ("End Dram Init\n\n"); - return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function calculates the EMRS1 value - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in] Wl - Indicates if WL mode should be enabled - * @param[in] TargetDIMM - DIMM target for WL - */ - -VOID -MemTEMRS13 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN BOOLEAN Wl, - IN UINT8 TargetDIMM - ) -{ - UINT16 MrsAddress; - UINT8 MaxDimmPerCH; - UINT8 ChipSel; - UINT8 Value8; - - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, - NBPtr->MCTPtr->SocketId, - NBPtr->ChannelPtr->ChannelID); - ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel)); - - // BA2=0,BA1=0,BA0=1 - NBPtr->SetBitField (NBPtr, BFMrsBank, 1); - - MrsAddress = 0; - - // program MrsAddress[5,1]=output driver impedance control (DIC): - // based on F2x[1,0]84[DrvImpCtrl] - Value8 = (UINT8)NBPtr->GetBitField (NBPtr, BFDrvImpCtrl); - if ((Value8 & ((UINT8) 1 << 1)) != 0) { - MrsAddress |= ((UINT16) 1 << 5); - } - if ((Value8 & ((UINT8) 1 << 0)) != 0) { - MrsAddress |= ((UINT16) 1 << 1); - } - - // program MrsAddress[9,6,2]=nominal termination resistance of ODT (RTT): - // Different CS may have different RTT. - // - if (NBPtr->MCTPtr->Status[SbRegistered]) { - // - // Registered Dimms - // - if ((NBPtr->ChannelPtr->DimmQrPresent & ((UINT16) (1 << (ChipSel >> 1)))) != 0) { - Value8 = NBPtr->PsPtr->QR_DramTerm; - } else { - Value8 = NBPtr->PsPtr->DramTerm; - } - } else { - // - // Unbuffered Dimms - // - Value8 = NBPtr->PsPtr->DramTerm; - } - // - // If Write Leveling this DIMM - // - if (Wl) { - if ((ChipSel >> 1) == TargetDIMM) { - // Program MrsAddress[7] = 1 for Write leveling enable - MrsAddress |= ((UINT16) 1 << 7); - if (ChipSel & 1) { - // Output buffer disabled, MrsAddress[7] (Qoff = 1) - MrsAddress |= ((UINT16) 1 << 12); - } - // Set Rtt_Nom = Rtt_Wr if there are 2 or more dimms - if ((NBPtr->ChannelPtr->DimmQrPresent != 0) || (NBPtr->ChannelPtr->Dimms >= 2)) { - Value8 = NBPtr->PsPtr->DynamicDramTerm; - } - } - } - // - // Turn off Rtt_Nom (DramTerm=0) for certain CS in certain configs. - // - // All odd CS for 4 Dimm Systems - if (MaxDimmPerCH == 4) { - if (ChipSel & 0x01) { - Value8 = 0; - } - // CS 1 and 5 for 3 Dimm configs - } else if (MaxDimmPerCH == 3) { - if ((ChipSel == 1) || (ChipSel == 5)) { - Value8 = 0; - } - } - // All odd CS of any QR Dimms - if ((NBPtr->ChannelPtr->DimmQrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) { - if (ChipSel & 0x01) { - Value8 = 0; - } - } - if ((Value8 & ((UINT8) 1 << 2)) != 0) { - MrsAddress |= ((UINT16) 1 << 9); - } - if ((Value8 & ((UINT8) 1 << 1)) != 0) { - MrsAddress |= ((UINT16) 1 << 6); - } - if ((Value8 & ((UINT8) 1 << 0)) != 0) { - MrsAddress |= ((UINT16) 1 << 2); - } - - // program MrsAddress[12]=output disable (QOFF): - // based on F2x[1,0]84[Qoff] - if (NBPtr->GetBitField (NBPtr, BFQoff) != 0) { - MrsAddress |= ((UINT16) 1 << 12); - } - - // program MrsAddress[11]=TDQS: - // based on F2x[1,0]94[RDqsEn] - if (NBPtr->GetBitField (NBPtr, BFRDqsEn) != 0) { - MrsAddress |= ((UINT16) 1 << 11); - } - - NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function calculates the EMRS2 value - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - */ - -VOID -MemTEMRS23 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT32 MrsAddress; - UINT8 DramTermDyn; - UINT8 MaxDimmPerCH; - UINT8 ChipSel; - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - - MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID ); - ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel)); - - // BA2=0,BA1=1,BA0=0 - NBPtr->SetBitField (NBPtr, BFMrsBank, 2); - - // program MrsAddress[5:3]=CAS write latency (CWL): - // based on F2x[1,0]84[Tcwl] - MrsAddress = NBPtr->GetBitField (NBPtr, BFTcwl) << 3; - - // program MrsAddress[6]=auto self refresh method (ASR): - // based on F2x[1,0]84[ASR] - // program MrsAddress[7]=self refresh temperature range (SRT): - // based on F2x[1,0]84[ASR and SRT] - MrsAddress |= NBPtr->GetBitField (NBPtr, BFASR) << 6; - MrsAddress |= NBPtr->GetBitField (NBPtr, BFSRT) << 7; - - // program MrsAddress[10:9]=dynamic termination during writes (RTT_WR): - // based on F2x[1,0]84[DramTermDyn] - DramTermDyn = (UINT8) NBPtr->GetBitField (NBPtr, BFDramTermDyn); - // Special Case for 1 DR Unbuffered Dimm in 3 Dimm/Ch - if (!(NBPtr->MCTPtr->Status[SbRegistered])) { - if (MaxDimmPerCH == 3) { - if (NBPtr->ChannelPtr->Dimms == 1) { - if ((NBPtr->ChannelPtr->DimmDrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) { - DramTermDyn = 1; - } - } - } - } - MrsAddress |= (UINT16) DramTermDyn << 9; - - NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function calculates the EMRS3 value - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - */ - -VOID -STATIC -MemTEMRS33 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - - // BA2=0,BA1=1,BA0=1 - NBPtr->SetBitField (NBPtr, BFMrsBank, 3); - - // program MrsAddress[1:0]=multi purpose register address location - // (MPR Location):based on F2x[1,0]84[MprLoc] - // program MrsAddress[2]=multi purpose register - // (MPR):based on F2x[1,0]84[MprEn] - NBPtr->SetBitField (NBPtr, BFMrsAddress, (NBPtr->GetBitField (NBPtr, BFDramMRSReg) >> 24) & 0x0007); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This sets MRS value - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - */ - -VOID -STATIC -MemTMRS3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT32 MrsAddress; - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - - // BA2=0,BA1=0,BA0=0 - NBPtr->SetBitField (NBPtr, BFMrsBank, 0); - - // program MrsAddress[1:0]=burst length and control method - // (BL):based on F2x[1,0]84[BurstCtrl] - MrsAddress = NBPtr->GetBitField (NBPtr, BFBurstCtrl); - - // program MrsAddress[3]=1 (BT):interleaved - MrsAddress |= (UINT16) 1 << 3; - - // program MrsAddress[6:4,2]=read CAS latency - // (CL):based on F2x[1,0]88[Tcl] - // -- F2x88[3:0] to MrsAddress[6:4,2]=xxx0b -- - MrsAddress |= NBPtr->GetBitField (NBPtr, BFTcl) << 4; - - // program MrsAddress[11:9]=write recovery for auto-precharge - // (WR):based on F2x[1,0]84[Twr] - MrsAddress |= NBPtr->GetBitField (NBPtr, BFTwrDDR3) << 9; - - // program MrsAddress[12] (PPD):based on F2x[1,0]84[PChgPDModeSel] - MrsAddress |= NBPtr->GetBitField (NBPtr, BFPchgPDModeSel) << 12; - - // program MrsAddress[8]=1 (DLL):DLL reset - MrsAddress |= (UINT32) 1 << 8; - - NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This send all MR commands to a rank in sequence 2-3-1-0 - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in] ChipSel - Target Chip Select - */ - -VOID -MemTSendAllMRCmds3 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN UINT8 ChipSel - ) -{ - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - - NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel); - - // 13.Send EMRS(2) - MemTEMRS23 (TechPtr); - NBPtr->SendMrsCmd (NBPtr); - - // 14.Send EMRS(3). Ordinarily at this time, MrsAddress[2:0]=000b - MemTEMRS33 (TechPtr); - NBPtr->SendMrsCmd (NBPtr); - - // 15.Send EMRS(1). - MemTEMRS13 (TechPtr, FALSE, (ChipSel >> 1)); - NBPtr->SendMrsCmd (NBPtr); - - // 16.Send MRS with MrsAddress[8]=1(reset the DLL) - MemTMRS3 (TechPtr); - NBPtr->SendMrsCmd (NBPtr); -} |