diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f10/Proc/Mem/NB/DA/mndctda.c')
-rwxr-xr-x | src/vendorcode/amd/agesa/f10/Proc/Mem/NB/DA/mndctda.c | 459 |
1 files changed, 459 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Proc/Mem/NB/DA/mndctda.c b/src/vendorcode/amd/agesa/f10/Proc/Mem/NB/DA/mndctda.c new file mode 100755 index 0000000000..da8ed6c4c6 --- /dev/null +++ b/src/vendorcode/amd/agesa/f10/Proc/Mem/NB/DA/mndctda.c @@ -0,0 +1,459 @@ +/** + * @file + * + * mndctda.c + * + * Northbridge DA DCT supporting functions + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/NB/DA) + * @e \$Revision: 11190 $ @e \$Date: 2009-03-02 10:39:45 -0600 (Mon, 02 Mar 2009) $ + * + **/ +/***************************************************************************** +* +* Copyright (c) 2011, Advanced Micro Devices, Inc. +* All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are met: +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* * Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the distribution. +* * Neither the name of Advanced Micro Devices, Inc. nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +* *************************************************************************** +* +*/ + + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "mnda.h" +#include "merrhdl.h" +#include "cpuRegisters.h" +#include "Filecode.h" +#include "GeneralServices.h" +#include "cpuFamilyTranslation.h" +#include "cpuRegisters.h" +#include "mport.h" +#include "F10PackageType.h" +#define FILECODE PROC_MEM_NB_DA_MNDCTDA_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define UNUSED_CLK 4 + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + + + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +extern BUILD_OPT_CFG UserOptions; + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This is a general purpose function that executes before DRAM init + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemNBeforeDramInitDA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Dct; + + //Setting the reset value of Phy DLL standby and shutdown registers. + for (Dct = 0; Dct < MAX_DCTS_PER_NODE_DA; Dct++) { + MemNSwitchDCTNb (NBPtr, Dct); + if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { + //Set PllLockTime and DllLockTime to default. + MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x000007D0); + MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x00000190); + MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 1); + + //Clear PHY PLL Control Register before doing fence training and reset DLL + MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F0C, 0x00002000); + MemNSetBitFieldNb (NBPtr, BFPhyDLLControl, 0); + MemNSetBitFieldNb (NBPtr, BFPhy0x0D080F0C, 0); + } + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function programs the memory controller with configuration parameters + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - An Error value lower than AGESA_FATAL may have occurred + * @return FALSE - An Error value greater than or equal to AGESA_FATAL may have occurred + * @return NBPtr->MCTPtr->ErrCode - Contains detailed AGESA_STATUS value + */ + +BOOLEAN +memNAutoConfigDA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + DIE_STRUCT *MCTPtr; + DCT_STRUCT *DCTPtr; + MEM_PARAMETER_STRUCT *RefPtr; + + RefPtr = NBPtr->RefPtr; + MCTPtr = NBPtr->MCTPtr; + DCTPtr = NBPtr->DCTPtr; + //====================================================================== + // Build Dram Control Register Value (F2x78) + //====================================================================== + // + + MemNSetBitFieldNb (NBPtr, BFEarlyArbEn, 1); + + //====================================================================== + // Build Dram Config Lo Register Value + //====================================================================== + // + + if (MCTPtr->Status[SbParDimms]) { + // + // SbParDimms should be set for all DDR3 RDIMMS + // Cannot turn off ParEn for DDR3 + // + //@attention - add debug option for parity control + MemNSetBitFieldNb (NBPtr, BFParEn, 1); + } + + + if (MCTPtr->GangedMode) { + MemNSetBitFieldNb (NBPtr, BFWidth128, 1); + } + + MemNSetBitFieldNb (NBPtr, BFX4Dimm, DCTPtr->Timings.Dimmx4Present & 0xF); + + if (!MCTPtr->Status[SbRegistered]) { + MemNSetBitFieldNb (NBPtr, BFUnBuffDimm, 1); + } + + if (MCTPtr->Status[SbEccDimms]) { + MemNSetBitFieldNb (NBPtr, BFDimmEccEn, 1); + } + + //====================================================================== + // Build Dram Config Hi Register Value + //====================================================================== + // + + MemNSetBitFieldNb (NBPtr, BFMemClkFreq, MemNGetMemClkFreqIdNb (NBPtr, DCTPtr->Timings.Speed)); + + if (MCTPtr->Status[SbRegistered]) { + if (DCTPtr->Timings.Dimmx4Present && DCTPtr->Timings.Dimmx8Present) { + MemNSetBitFieldNb (NBPtr, BFRDqsEn, 1); + } + } + + if (RefPtr->EnableBankSwizzle) { + MemNSetBitFieldNb (NBPtr, BFBankSwizzleMode, 1); + } + + if (DCTPtr->Timings.DimmQrPresent) { + if (UserOptions.CfgMemoryQuadrankType == QUADRANK_UNBUFFERED) { + MemNSetBitFieldNb (NBPtr, BFF2X98B17, 1); + } else if (UserOptions.CfgMemoryQuadrankType == QUADRANK_REGISTERED) { + MemNSetBitFieldNb (NBPtr, BFFourRankRDimm, 1); + } + } + + MemNSetBitFieldNb (NBPtr, BFDcqBypassMax, 0xF); + + MemNSetBitFieldNb (NBPtr, BFDcqArbBypassEn, 1); + + //====================================================================== + // Build Dram Config Misc Register Value + //====================================================================== + // + MemNSetBitFieldNb (NBPtr, BFOdtSwizzle, 1); + // For DDR3 Registered Dimms + if (MCTPtr->Status[SbRegistered]) { + if (MemNGetBitFieldNb (NBPtr, BFDdr3Mode)!= 0) { + MemNSetBitFieldNb (NBPtr, BFSubMemclkRegDly, 1); + } + } + return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function sends an MRS command + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemNSendMrsCmdDA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + MemNSwapBitsNb (NBPtr); + + IDS_HDT_CONSOLE ("\t\t\tCS%d MR%d %04x\n", + (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 20) & 0xF, + (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) >> 16) & 0xF, + (MemNGetBitFieldNb (NBPtr, BFDramInitRegReg) & 0xFFFF)); + + // 1.Set SendMrsCmd=1 + MemNSetBitFieldNb (NBPtr, BFSendMrsCmd, 1); + + // 2.Wait for SendMrsCmd=0 + MemNPollBitFieldNb (NBPtr, BFSendMrsCmd, 0, PCI_ACCESS_TIMEOUT, FALSE); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * Workaround for erratum 322 and 263 + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ +VOID +MemNBeforePlatformSpecDA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + // Errata 263 + if ((NBPtr->DCTPtr->Timings.Speed == DDR533_FREQUENCY) || (NBPtr->DCTPtr->Timings.Speed == DDR667_FREQUENCY)) { + MemNSetBitFieldNb (NBPtr, BFErr263, 0x0800); + } else { + MemNSetBitFieldNb (NBPtr, BFErr263, 0); + } + + // Errata 322 + // 1.Write 00000000h to F2x[1,0]9C_xD08E000 + MemNSetBitFieldNb (NBPtr, BFErr322I, 0); + // 2.If DRAM Configuration Register[MemClkFreq] (F2x[1,0]94[2:0]) is + // greater than or equal to 011b (DDR-800 and higher), + // then write 00000080h to F2x[1,0]9C_xD02E001, + // else write 00000090h to F2x[1,0]9C_xD02E001. + MemNSetBitFieldNb (NBPtr, BFErr322II, (NBPtr->DCTPtr->Timings.Speed >= DDR800_FREQUENCY) ? 0x80 : 0x90); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * Change Average Value of 3 + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ +BOOLEAN +MemNChangeAvgValue3DA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C0) != 0) { + return TRUE; + } else { + return FALSE; + } +} + +/** + * + * + * Change Average Value of 8 + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ +BOOLEAN +MemNChangeAvgValue8DA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + if ((NBPtr->MCTPtr->LogicalCpuid.Revision & AMD_F10_C1) != 0) { + return TRUE; + } else { + return FALSE; + } +} +/* -----------------------------------------------------------------------------*/ +/** + * + * + * Enable DLL Shut down + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ +VOID +MemNEnDLLShutDownDA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Dct; + BOOLEAN DllShutDownEn; + + DllShutDownEn = TRUE; + IDS_OPTION_HOOK (IDS_DLL_SHUT_DOWN, &DllShutDownEn, &(NBPtr->MemPtr->StdHeader)); + + if (DllShutDownEn && NBPtr->IsSupported[SetDllShutDown]) { + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + MemNSwitchDCTNb (NBPtr, Dct); + if (NBPtr->DCTPtr->Timings.DctMemSize != 0) { + MemNSetBitFieldNb (NBPtr, BFPhyPLLLockTime, 0x0000001C); + MemNSetBitFieldNb (NBPtr, BFPhyDLLLockTime, 0x0000013D); + MemNSetBitFieldNb (NBPtr, BFDisDllShutdownSR, 0); + } + } + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function caps speed based on batter life check. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + */ +VOID +MemNCapSpeedBatteryLifeDA ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + CONST UINT16 SupportedFreq[] = { + DDR1600_FREQUENCY, + DDR1333_FREQUENCY, + DDR1066_FREQUENCY, + DDR800_FREQUENCY, + DDR667_FREQUENCY, + DDR533_FREQUENCY, + DDR400_FREQUENCY + }; + UINT32 NBFreq; + UINT8 j; + UINT16 DdrFreq; + UINT32 ProcessorPackageType; + CPU_SPECIFIC_SERVICES *FamilySpecificServices; + + FamilySpecificServices = NULL; + DdrFreq = DDR800_FREQUENCY; // Set Default to be 400Mhz + GetCpuServicesOfSocket (NBPtr->MCTPtr->SocketId, &FamilySpecificServices, &(NBPtr->MemPtr->StdHeader)); + if (FamilySpecificServices->IsNbPstateEnabled (FamilySpecificServices, &(NBPtr->MemPtr->StdHeader))) { + ProcessorPackageType = LibAmdGetPackageType (&(NBPtr->MemPtr->StdHeader)); + NBFreq = (MemNGetBitFieldNb (NBPtr, BFNbFid) + 4) * 100; // Calculate the Nb P1 frequency (NbFreq / 2) + for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) { + if (NBFreq >= ((UINT32) 2 * SupportedFreq[j])) { + // Pick Max MEMCLK that is less than or equal to (NCLK_P1 / 2) + DdrFreq = SupportedFreq[j]; + break; + } + } + if ((ProcessorPackageType != PACKAGE_TYPE_S1G3_S1G4) || + (NBPtr->MemPtr->PlatFormConfig->PlatformProfile.PlatformPowerPolicy == BatteryLife)) { + if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) { + NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq; + } + } else { + PutEventLog (AGESA_WARNING, MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader); + DdrFreq = DDR800_FREQUENCY; // Set Default to be 400Mhz + NBFreq = (MemNGetBitFieldNb (NBPtr, BFNbFid) + 4) * 200; // Calculate the Nb P0 frequency + for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) { + if (NBFreq >= ((UINT32) 2 * SupportedFreq[j])) { + // Pick Max MEMCLK that is less than or equal to (NCLK_P0 / 2) + DdrFreq = SupportedFreq[j]; + break; + } + } + if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) { + NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq; + } + } + MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 4); + MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 1); + } else { + NBFreq = (MemNGetBitFieldNb (NBPtr, BFNbFid) + 4) * 200; // Calculate the Nb P0 frequency + for (j = 0; j < GET_SIZE_OF (SupportedFreq); j++) { + if (NBFreq >= ((UINT32) 2 * SupportedFreq[j])) { + // Pick Max MEMCLK that is less than or equal to (NCLK_P0 / 2) + DdrFreq = SupportedFreq[j]; + break; + } + } + if (NBPtr->DCTPtr->Timings.TargetSpeed > DdrFreq) { + NBPtr->DCTPtr->Timings.TargetSpeed = DdrFreq; + } + MemNSetBitFieldNb (NBPtr, BFRdPtrInit, 6); + MemNSetBitFieldNb (NBPtr, BFDataTxFifoWrDly, 0); + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ |