diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f10/Proc/Common/S3SaveState.c')
| -rw-r--r-- | src/vendorcode/amd/agesa/f10/Proc/Common/S3SaveState.c | 453 |
1 files changed, 0 insertions, 453 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Proc/Common/S3SaveState.c b/src/vendorcode/amd/agesa/f10/Proc/Common/S3SaveState.c deleted file mode 100644 index 730a36a0d4..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/Common/S3SaveState.c +++ /dev/null @@ -1,453 +0,0 @@ -/** - * @file - * - * S3 save/restore script - * - * - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: GNB - * @e \$Revision: 20539 $ @e \$Date: 2009-10-14 10:48:54 -0700 (Wed, 14 Oct 2009) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- - */ -#include "Porting.h" -#include "AMD.h" -#include "amdlib.h" -#include "heapManager.h" -#include "S3SaveState.h" -#include "Filecode.h" -#define FILECODE PROC_COMMON_S3SAVESTATE_FILECODE -/*---------------------------------------------------------------------------------------- - * D E F I N I T I O N S A N D M A C R O S - *---------------------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ -extern S3_SCRIPT_CONFIGURATION OptionS3ScriptConfiguration; - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------------------*/ -/** - * Initialize S3 Script framework - * - * - * - * @param[in] StdHeader Pointer to standard header - */ -AGESA_STATUS -S3ScriptInit ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - return OptionS3ScriptConfiguration.Init (StdHeader); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Initialize S3 Script framework - * - * - * - * @param[in] StdHeader Pointer to standard header - */ -AGESA_STATUS -S3ScriptInitStateStub ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - return AGESA_SUCCESS; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Initialize S3 Script framework - * - * - * - * @param[in] StdHeader Pointer to standard header - */ -AGESA_STATUS -S3ScriptInitState ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - AGESA_STATUS Status; - ALLOCATE_HEAP_PARAMS AllocHeapParams; - - AllocHeapParams.RequestedBufferSize = S3_TABLE_LENGTH; - AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE; - AllocHeapParams.Persist = StdHeader->HeapStatus; - Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader); - if (Status == AGESA_SUCCESS) { - ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->TableLength = S3_TABLE_LENGTH; - ((S3_SAVE_TABLE_HEADER *) AllocHeapParams.BufferPtr)->SaveOffset = sizeof (S3_SAVE_TABLE_HEADER); - } - return Status; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Initialize S3 Script framework - * - * - * - * @param[in] StdHeader Pointer to standard header - * @param[in,out] S3SaveTable S3 save table header - */ -STATIC AGESA_STATUS -S3SaveStateExtendTableLenth ( - IN AMD_CONFIG_PARAMS *StdHeader, - IN OUT S3_SAVE_TABLE_HEADER **S3SaveTable - ) -{ - AGESA_STATUS Status; - ALLOCATE_HEAP_PARAMS AllocHeapParams; - VOID *TempBuffer; - UINT16 NewTableLength; - UINT16 CurrentTableLength; - //Allocate temporary buffer - NewTableLength = (*S3SaveTable)->TableLength + S3_TABLE_LENGTH_INCREMENT; - AllocHeapParams.RequestedBufferSize = NewTableLength; - AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE; - AllocHeapParams.Persist = StdHeader->HeapStatus; - Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader); - if (Status != AGESA_SUCCESS) { - return Status; - } - //Save current table length - CurrentTableLength = (*S3SaveTable)->TableLength; - //Update table length - (*S3SaveTable)->TableLength = NewTableLength; - //Copy S3 save toable to temporary location - LibAmdMemCopy (AllocHeapParams.BufferPtr, *S3SaveTable, CurrentTableLength, StdHeader); - //Save pointer to temp buffer - TempBuffer = AllocHeapParams.BufferPtr; - // Free original S3 save buffer - HeapDeallocateBuffer (AMD_S3_SCRIPT_SAVE_TABLE_HANDLE, StdHeader); - - AllocHeapParams.RequestedBufferSize = NewTableLength; - AllocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE; - AllocHeapParams.Persist = StdHeader->HeapStatus; - Status = HeapAllocateBuffer (&AllocHeapParams, StdHeader); - if (Status != AGESA_SUCCESS) { - return Status; - } - LibAmdMemCopy (AllocHeapParams.BufferPtr, TempBuffer, AllocHeapParams.RequestedBufferSize, StdHeader); - *S3SaveTable = (S3_SAVE_TABLE_HEADER*) AllocHeapParams.BufferPtr; - HeapDeallocateBuffer (AMD_S3_SCRIPT_TEMP_BUFFER_HANDLE, StdHeader); - return Status; -} - - -/*----------------------------------------------------------------------------------------*/ -/** - * Initialize S3 Script framework - * - * - * - * @param[in] StdHeader Pointer to standard header - * @param[out] S3SaveTable S3 save table header - */ -AGESA_STATUS -S3ScriptGetS3SaveTable ( - IN AMD_CONFIG_PARAMS *StdHeader, - OUT S3_SAVE_TABLE_HEADER **S3SaveTable - ) -{ - AGESA_STATUS Status; - LOCATE_HEAP_PTR LocHeapParams; - LocHeapParams.BufferHandle = AMD_S3_SCRIPT_SAVE_TABLE_HANDLE; - Status = HeapLocateBuffer (&LocHeapParams, StdHeader); - if (Status != AGESA_SUCCESS) { - *S3SaveTable = NULL; - return Status; - } - *S3SaveTable = (S3_SAVE_TABLE_HEADER *) LocHeapParams.BufferPtr; - return AGESA_SUCCESS; -} - - -/*----------------------------------------------------------------------------------------*/ -/** - * Save S3 write opcode - * - * - * - * @param[in] StdHeader Pointer to standard header - * @param[in] OpCode Operation opcode - * @param[in] Width Width - * @param[in] Address Register address - * @param[in] Count Number of register writes - * @param[in] Buffer Pointer to write buffer - */ -AGESA_STATUS -S3SaveStateSaveWriteOp ( - IN AMD_CONFIG_PARAMS *StdHeader, - IN UINT16 OpCode, - IN ACCESS_WIDTH Width, - IN UINT64 Address, - IN UINT32 Count, - IN VOID *Buffer - ) -{ - S3_SAVE_TABLE_HEADER *S3SaveTablePtr; - S3_WRITE_OP_HEADER *SaveOffsetPtr; - UINT32 OpCodeLength; - UINT32 WidthLength; - AGESA_STATUS Status; - - Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - WidthLength = LibAmdAccessWidth (Width); - OpCodeLength = sizeof (S3_WRITE_OP_HEADER) + WidthLength * Count; - if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { - Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - } - SaveOffsetPtr = (S3_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); - SaveOffsetPtr->OpCode = OpCode; - SaveOffsetPtr->Width = Width; - SaveOffsetPtr->Count = Count; - SaveOffsetPtr->Address = Address; - LibAmdMemCopy ( - (UINT8 *) SaveOffsetPtr + sizeof (S3_WRITE_OP_HEADER), - Buffer, - WidthLength * Count, - StdHeader - ); - S3SaveTablePtr->SaveOffset += OpCodeLength; - return AGESA_SUCCESS; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Save S3 write opcode - * - * - * - * @param[in] StdHeader Pointer to standard header - * @param[in] OpCode Operation opcode - * @param[in] Width Width - * @param[in] Address Register address - * @param[in] Data Pointer to data - * @param[in] DataMask Pointer data mask - */ -AGESA_STATUS -S3SaveStateSaveReadWriteOp ( - IN AMD_CONFIG_PARAMS *StdHeader, - IN UINT16 OpCode, - IN ACCESS_WIDTH Width, - IN UINT64 Address, - IN VOID *Data, - IN VOID *DataMask - ) -{ - - S3_SAVE_TABLE_HEADER *S3SaveTablePtr; - S3_READ_WRITE_OP_HEADER *SaveOffsetPtr; - UINT32 OpCodeLength; - UINT32 WidthLength; - AGESA_STATUS Status; - - Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - WidthLength = LibAmdAccessWidth (Width); - OpCodeLength = sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength * 2; - if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { - Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - } - - SaveOffsetPtr = (S3_READ_WRITE_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); - SaveOffsetPtr->OpCode = OpCode; - SaveOffsetPtr->Width = Width; - SaveOffsetPtr->Address = Address; - - LibAmdMemCopy ( - (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER), - Data, - WidthLength, - StdHeader - ); - LibAmdMemCopy ( - (UINT8 *) SaveOffsetPtr + sizeof (S3_READ_WRITE_OP_HEADER) + WidthLength, - DataMask, - WidthLength, - StdHeader - ); - S3SaveTablePtr->SaveOffset += OpCodeLength; - return AGESA_SUCCESS; -} - - -/*----------------------------------------------------------------------------------------*/ -/** - * Save S3 poll opcode - * - * - * - * @param[in] StdHeader Pointer to standard header - * @param[in] OpCode Operation opcode - * @param[in] Width Width - * @param[in] Address Register address - * @param[in] Data Pointer to data - * @param[in] DataMask Pointer data mask - * @param[in] Delay Time delay for poll - */ -AGESA_STATUS -S3SaveStateSavePollOp ( - IN AMD_CONFIG_PARAMS *StdHeader, - IN UINT16 OpCode, - IN ACCESS_WIDTH Width, - IN UINT64 Address, - IN VOID *Data, - IN VOID *DataMask, - IN UINT64 Delay - ) -{ - - S3_SAVE_TABLE_HEADER *S3SaveTablePtr; - S3_POLL_OP_HEADER *SaveOffsetPtr; - UINT32 OpCodeLength; - UINT32 WidthLength; - AGESA_STATUS Status; - - Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - WidthLength = LibAmdAccessWidth (Width); - OpCodeLength = sizeof (S3_POLL_OP_HEADER) + WidthLength * 2; - if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { - Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - } - - SaveOffsetPtr = (S3_POLL_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); - SaveOffsetPtr->OpCode = OpCode; - SaveOffsetPtr->Width = Width; - SaveOffsetPtr->Delay = Delay; - SaveOffsetPtr->Address = Address; - - LibAmdMemCopy ( - (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER), - Data, - WidthLength, - StdHeader - ); - LibAmdMemCopy ( - (UINT8 *) SaveOffsetPtr + sizeof (S3_POLL_OP_HEADER) + WidthLength, - DataMask, - WidthLength, - StdHeader - ); - S3SaveTablePtr->SaveOffset += OpCodeLength; - return AGESA_SUCCESS; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Save S3 poll opcode - * - * - * - * @param[in] StdHeader Pointer to standard header - * @param[in] OpCode Operation opcode - * @param[in] InformationLength Info length - * @param[in] Information Pointer to information - */ -AGESA_STATUS -S3SaveStateSaveInfoOp ( - IN AMD_CONFIG_PARAMS *StdHeader, - IN UINT16 OpCode, - IN UINT32 InformationLength, - IN VOID *Information - ) -{ - - S3_SAVE_TABLE_HEADER *S3SaveTablePtr; - S3_INFO_OP_HEADER *SaveOffsetPtr; - UINT32 OpCodeLength; - - AGESA_STATUS Status; - - Status = S3ScriptGetS3SaveTable (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - OpCodeLength = sizeof (S3_INFO_OP_HEADER) + InformationLength; - if ((S3SaveTablePtr->SaveOffset + OpCodeLength) > S3SaveTablePtr->TableLength) { - Status = S3SaveStateExtendTableLenth (StdHeader, &S3SaveTablePtr); - if (Status != AGESA_SUCCESS) { - return Status; - } - } - - SaveOffsetPtr = (S3_INFO_OP_HEADER *) ((UINT8 *) S3SaveTablePtr + S3SaveTablePtr->SaveOffset); - SaveOffsetPtr->OpCode = OpCode; - SaveOffsetPtr->Length = InformationLength; - - LibAmdMemCopy ( - (UINT8 *) SaveOffsetPtr + sizeof (S3_INFO_OP_HEADER), - Information, - InformationLength, - StdHeader - ); - S3SaveTablePtr->SaveOffset += OpCodeLength; - return AGESA_SUCCESS; -} |