diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/cpuF10Utilities.c')
-rwxr-xr-x | src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/cpuF10Utilities.c | 1768 |
1 files changed, 1768 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/cpuF10Utilities.c b/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/cpuF10Utilities.c new file mode 100755 index 0000000000..549c59e134 --- /dev/null +++ b/src/vendorcode/amd/agesa/f10/Proc/CPU/Family/0x10/cpuF10Utilities.c @@ -0,0 +1,1768 @@ +/** + * @file + * + * AMD Family_10 specific utility functions. + * + * Provides numerous utility functions specific to family 10h. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU/F10 + * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ + * + */ +/* + ****************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "cpuRegisters.h" +#include "cpuFamilyTranslation.h" +#include "cpuF10PowerMgmt.h" +#include "cpuApicUtilities.h" +#include "cpuServices.h" +#include "GeneralServices.h" +#include "cpuF10Utilities.h" +#include "cpuPostInit.h" +#include "Filecode.h" +#define FILECODE PROC_CPU_FAMILY_0X10_CPUF10UTILITIES_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +// Register encodings for F3xD8[VSRampTime/VSSlamTime] +CONST UINT32 ROMDATA VSSlamTime[8] = +{ + 10, // 000b: 10us + 20, // 001b: 20us + 30, // 010b: 30us + 40, // 011b: 40us + 60, // 100b: 60us + 100, // 101b: 100us + 200, // 110b: 200us + 500 // 111b: 500us +}; + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ +AGESA_STATUS +F10GetNbFrequency ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN PCI_ADDR *PciAddress, + OUT UINT32 *FrequencyInMHz, + OUT UINT32 *VoltageInuV, + IN AMD_CONFIG_PARAMS *StdHeader + ); +VOID +F10GetHtLinkFeatures ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + OUT UINTN *Link, + IN PCI_ADDR *LinkBase, + OUT HT_HOST_FEATS *HtHostFeats, + IN AMD_CONFIG_PARAMS *StdHeader + ); +BOOLEAN +F10DoesLinkHaveHtPhyFeats ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN PCI_ADDR CapabilitySet, + IN UINT32 Link, + IN HT_PHY_LINK_FEATS *HtPhyLinkType, + OUT BOOLEAN *MatchedSublink1, + OUT HT_FREQUENCIES *Frequency0, + OUT HT_FREQUENCIES *Frequency1, + IN AMD_CONFIG_PARAMS *StdHeader + ); +VOID +F10SetHtPhyRegister ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN HT_PHY_TYPE_ENTRY_DATA *HtPhyEntry, + IN PCI_ADDR CapabilitySet, + IN UINT32 Link, + IN AMD_CONFIG_PARAMS *StdHeader + ); +VOID +F10SetRegisterForHtLinkTokenEntry ( + IN TABLE_ENTRY_DATA *Entry, + IN PLATFORM_CONFIGURATION *PlatformConfig, + IN AMD_CONFIG_PARAMS *StdHeader + ); + +/*---------------------------------------------------------------------------------------*/ +/** + * Performs the necessary steps for the 'Software Initiated CPU + * Voltage Transitions.' + * + * @param[in] VidCode VID code to transition to + * @param[in] StdHeader Header for library and services + * + */ +VOID +F10PmSwVoltageTransition ( + IN UINT32 VidCode, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 PciRegister; + UINT32 Socket; + UINT32 Module; + UINT32 Ignored; + UINT64 MsrRegister; + PCI_ADDR PciAddress; + AGESA_STATUS IgnoredSts; + + IdentifyCore (StdHeader, &Socket, &Module, &Ignored, &IgnoredSts); + GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts); + + PciAddress.Address.Function = FUNC_3; + PciAddress.Address.Register = PW_CTL_MISC_REG; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + if (((POWER_CTRL_MISC_REGISTER *) &PciRegister)->SlamVidMode == 1) { + LibAmdMsrRead (MSR_COFVID_CTL, &MsrRegister, StdHeader); + ((COFVID_CTRL_MSR *) &MsrRegister)->CpuVid = VidCode; + LibAmdMsrWrite (MSR_COFVID_CTL, &MsrRegister, StdHeader); + F10WaitOutVoltageTransition (TRUE, StdHeader); + } else + return; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Performs the necessary steps for the 'Software Initiated NB + * Voltage Transitions.' + * + * This can only be run by a local core 0. + * + * @param[in] VidCode VID code to transition to + * @param[in] SlamMode Whether voltage is to be slammed, or stepped + * @param[in] StdHeader Header for library and services + * + */ +VOID +F10PmSwVoltageTransitionServerNb ( + IN UINT32 VidCode, + IN BOOLEAN SlamMode, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 Core; + UINT32 NbVidStatus; + UINT32 Socket; + UINT32 IgnoredModule; + UINT32 IgnoredCore; + UINT32 CoreNum; + AP_TASK TaskPtr; + AGESA_STATUS IgnoredSts; + SW_VOLT_TRANS_NB RemoteInput; + + RemoteInput.VidCode = VidCode; + RemoteInput.SlamMode = SlamMode; + TaskPtr.FuncAddress.PfApTaskIO = F10SwVoltageTransitionServerNbCore; + TaskPtr.DataTransfer.DataSizeInDwords = SIZE_IN_DWORDS (SW_VOLT_TRANS_NB); + TaskPtr.DataTransfer.DataPtr = &RemoteInput; + TaskPtr.DataTransfer.DataTransferFlags = 0; + TaskPtr.ExeFlags = WAIT_FOR_CORE; + + IdentifyCore (StdHeader, &Socket, &IgnoredModule, &IgnoredCore, &IgnoredSts); + GetActiveCoresInCurrentSocket (&CoreNum, StdHeader); + + do { + NbVidStatus = TaskPtr.FuncAddress.PfApTaskIO (&RemoteInput, StdHeader); + for (Core = 1; Core < (UINT8) CoreNum; Core++) { + NbVidStatus |= ApUtilRunCodeOnSocketCore ((UINT8)Socket, (UINT8)Core, &TaskPtr, StdHeader); + } + F10WaitOutVoltageTransition (SlamMode, StdHeader); + } while (NbVidStatus != 0); + return; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Returns current VsSlamTime in microseconds. + * + * @param[out] VsTimeUsecs Provides the wait time needed for a Slam Voltage transition. + * @param[in] SlamMode Whether voltage is to be slammed, or stepped + * @param[in] StdHeader Header for library and services + * + */ +VOID +F10GetCurrentVsTimeInUsecs ( + OUT UINT32 *VsTimeUsecs, + IN BOOLEAN SlamMode, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 RegisterEncoding; + UINT32 PciRegister; + UINT32 Socket; + UINT32 Module; + UINT32 Ignored; + CONST UINT16 SlamTimes[8] = {10, 20, 30, 40, 60, 100, 200, 500}; + PCI_ADDR PciAddress; + AGESA_STATUS IgnoredSts; + + IdentifyCore (StdHeader, &Socket, &Module, &Ignored, &IgnoredSts); + GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts); + + PciAddress.Address.Function = FUNC_3; + PciAddress.Address.Register = CPTC1_REG; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + + if (SlamMode) { + RegisterEncoding = (UINT8) ((CLK_PWR_TIMING_CTRL1_REGISTER *) &PciRegister)->VSSlamTime; + } else { + RegisterEncoding = (UINT8) ((CLK_PWR_TIMING_CTRL1_REGISTER *) &PciRegister)->VSRampTime; + } + + *VsTimeUsecs = (UINT32) SlamTimes[RegisterEncoding]; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Spins until VsSlamTime microseconds have expired. + * + * @param[in] SlamMode Whether voltage is to be slammed, or stepped + * @param[in] StdHeader Header for library and services + * + */ +VOID +F10WaitOutVoltageTransition ( + IN BOOLEAN SlamMode, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 VsTimeUsecs; + + F10GetCurrentVsTimeInUsecs (&VsTimeUsecs, SlamMode, StdHeader); + WaitMicroseconds (VsTimeUsecs, StdHeader); + return; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Code required to be run on every local core in order to perform + * the steps necessary for 'Software Initiated NB Voltage + * Transitions.' + * + * @param[out] InputData Family specific data needed to perform a Voltage transition. + * @param[in] StdHeader Header for library and services. + * + * @retval zero All Voltage Transitions are completed. + * @retval one There are Voltage transitions remaining to reach target. + * + */ +UINT32 +F10SwVoltageTransitionServerNbCore ( + IN VOID *InputData, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 VidCode; + UINT64 MsrRegister; + + if (((SW_VOLT_TRANS_NB *) InputData)->SlamMode) { + VidCode = ((SW_VOLT_TRANS_NB *) InputData)->VidCode; + } else { + LibAmdMsrRead (MSR_COFVID_STS, &MsrRegister, StdHeader); + VidCode = (UINT32) (((COFVID_STS_MSR *) &MsrRegister)->CurNbVid); + if (VidCode > ((SW_VOLT_TRANS_NB *) InputData)->VidCode) { + --VidCode; + } else if (VidCode < ((SW_VOLT_TRANS_NB *) InputData)->VidCode) { + ++VidCode; + } + } + LibAmdMsrRead (MSR_COFVID_CTL, &MsrRegister, StdHeader); + ((COFVID_CTRL_MSR *) &MsrRegister)->NbVid = VidCode; + LibAmdMsrWrite (MSR_COFVID_CTL, &MsrRegister, StdHeader); + + if (VidCode == ((SW_VOLT_TRANS_NB *) InputData)->VidCode) { + return 0; + } else { + return 1; + } +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Calculate and reprogram F3xD8[VSSlamTime] based on the algorithm in the BKDG. + * + * This function determines the largest voltage step that the core will have + * to make, calculates how much time it will take for the voltage to stabilize, + * and programs the necessary encoded value for the amount of time discovered. + * + * @param[in] PciAddress Segment/bus/device of a module on the socket + * to program. + * @param[in] CpuEarlyParams Service parameters + * @param[in] StdHeader Config handle for library and services. + * + */ +VOID +F10ProgramVSSlamTimeOnSocket ( + IN PCI_ADDR *PciAddress, + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 NbVid; + UINT8 P0VidCode; + UINT8 PminVidCode; + UINT32 AndMask; + UINT32 MsrAddr; + UINT32 OrMask; + UINT32 PciRegister; + UINT64 MsrRegister; + BOOLEAN IsPviMode; + PCI_ADDR LocalPciAddress; + + // Get F3xA0[PviMode] + LocalPciAddress.AddressValue = PciAddress->AddressValue; + LocalPciAddress.Address.Function = FUNC_3; + LocalPciAddress.Address.Register = PW_CTL_MISC_REG; + LibAmdPciRead (AccessWidth32, LocalPciAddress, &PciRegister, StdHeader); + if (((POWER_CTRL_MISC_REGISTER *) &PciRegister)->PviMode == 1) { + IsPviMode = TRUE; + } else { + IsPviMode = FALSE; + } + + // Get P0's voltage + LibAmdMsrRead (PS_REG_BASE, &MsrRegister, StdHeader); + P0VidCode = (UINT8) (((PSTATE_MSR *) &MsrRegister)->CpuVid); + + // If SVI, we only care about CPU VID. + // If PVI, determine the higher voltage between NB and CPU + if (IsPviMode) { + NbVid = (UINT8) (((PSTATE_MSR *) &MsrRegister)->NbVid); + if (P0VidCode > NbVid) { + P0VidCode = NbVid; + } + } + + // Get Pmin's index + LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &MsrRegister, StdHeader); + MsrAddr = (UINT32) ((((PSTATE_CURLIM_MSR *) &MsrRegister)->PstateMaxVal) + PS_REG_BASE); + + // Get Pmin's VID + LibAmdMsrRead (MsrAddr, &MsrRegister, StdHeader); + PminVidCode = (UINT8) (((PSTATE_MSR *) &MsrRegister)->CpuVid); + + // If SVI, we only care about CPU VID. + // If PVI, determine the higher voltage b/t NB and CPU + if (IsPviMode) { + NbVid = (UINT8) (((PSTATE_MSR *) &MsrRegister)->NbVid); + if (PminVidCode > NbVid) { + PminVidCode = NbVid; + } + } + + // Program F3xD8[VSSlamTime] + LocalPciAddress.Address.Register = CPTC1_REG; + AndMask = 0xFFFFFFFF; + ((CLK_PWR_TIMING_CTRL1_REGISTER *) &AndMask)->VSSlamTime = 0; + OrMask = 0x00000000; + ((CLK_PWR_TIMING_CTRL1_REGISTER *) &OrMask)->VSSlamTime = + F10GetSlamTimeEncoding (P0VidCode, PminVidCode, CpuEarlyParams, VSSlamTime, StdHeader); + ModifyCurrentSocketPci (&LocalPciAddress, AndMask, OrMask, StdHeader); +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Returns the encoded voltage stabilization slam time for the executing + * family 10h core. + * + * This function looks up the appropriate encoded value for the desired + * VID codes. + * + * @param[in] HighVoltageVid VID code of the higher voltage. + * @param[in] LowVoltageVid VID code of the lower voltage. + * @param[in] CpuEarlyParams Service parameters + * @param[in] SlamTimeTable Look-up table of slam times. + * @param[in] StdHeader Config handle for library and services. + * + * @retval Encoded register value. + * + */ +UINT32 +F10GetSlamTimeEncoding ( + IN UINT8 HighVoltageVid, + IN UINT8 LowVoltageVid, + IN AMD_CPU_EARLY_PARAMS *CpuEarlyParams, + IN CONST UINT32 *SlamTimeTable, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 SlamTime; + UINT32 EncodedSlamTime; + UINT32 VoltageDifference; + + ASSERT (LowVoltageVid >= HighVoltageVid); + ASSERT (CpuEarlyParams->PlatformConfig.VrmProperties.SlewRate != 0); + + // Calculate Slam Time + // VSSlamTime = 0.4us/mV (or 0.2us/mV) * Vhigh - Vlow + // In our case, we will scale the values by 100 to avoid + // decimals. + + VoltageDifference = (UINT32) ((LowVoltageVid - HighVoltageVid) * 12500); + SlamTime = (VoltageDifference / CpuEarlyParams->PlatformConfig.VrmProperties.SlewRate) + CpuEarlyParams->PlatformConfig.VrmProperties.AdditionalDelay; + if (VoltageDifference % CpuEarlyParams->PlatformConfig.VrmProperties.SlewRate) { + SlamTime++; + } + + // Now round up to nearest register setting + for (EncodedSlamTime = 0; EncodedSlamTime < 8; EncodedSlamTime++) { + if (SlamTime <= SlamTimeTable[EncodedSlamTime]) { + break; + } + } + + if (EncodedSlamTime > 7) { + // The VRMs are too slow for this CPU. Set to max, and fire an error trap. + IDS_ERROR_TRAP; + EncodedSlamTime = 7; + } + + return (EncodedSlamTime); +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Calculates the power in milliWatts of the desired P-state. + * + * @CpuServiceMethod{::F_CPU_GET_PSTATE_POWER}. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] StateNumber Which P-state to analyze + * @param[out] PowerInMw The Power in milliWatts of that P-State + * @param[in] StdHeader Header for library and services + * + * @retval AGESA_SUCCESS Always succeeds. + */ +AGESA_STATUS +F10GetPstatePower ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN UINT8 StateNumber, + OUT UINT32 *PowerInMw, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 CpuVid; + UINT32 IddValue; + UINT32 IddDiv; + UINT32 Socket; + UINT32 Module; + UINT32 Ignored; + BOOLEAN PviFlag; + UINT32 V_x10000; + UINT32 Power; + PCI_ADDR PciAddress; + UINT32 TempVar_a; + UINT64 MsrRegister; + AGESA_STATUS IgnoredSts; + + ASSERT (StateNumber < NM_PS_REG); + LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &MsrRegister, StdHeader); + ASSERT (((PSTATE_MSR *) &MsrRegister)->PsEnable == 1); + CpuVid = (UINT32) (((PSTATE_MSR *) &MsrRegister)->CpuVid); + IddValue = (UINT32) (((PSTATE_MSR *) &MsrRegister)->IddValue); + IddDiv = (UINT32) (((PSTATE_MSR *) &MsrRegister)->IddDiv); + + IdentifyCore (StdHeader, &Socket, &Module, &Ignored, &IgnoredSts); + GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts); + + PciAddress.Address.Function = FUNC_3; + PciAddress.Address.Register = POWER_CTRL_MISCELLANEOUS_REG; + LibAmdPciRead (AccessWidth32, PciAddress, &TempVar_a, StdHeader); + if ((TempVar_a & 0x00000100) != 0) { + PviFlag = TRUE; + } else { + PviFlag = FALSE; + } + if (PviFlag) { + // Set CpuVid value in case CPU is in PVI mode + if (CpuVid > 0x5D) { + CpuVid = 0x3F; + } else if (CpuVid > 0x3E) { + CpuVid = CpuVid - 0x1F; + } else { + CpuVid = (CpuVid >> 1); + } + + // PVI Encoding + if (CpuVid >= 0x20) { + V_x10000 = 7625L - (125L * (CpuVid - 0x20)); + } else { + V_x10000 = 15500L - (250L * CpuVid); + } + } else { + if (CpuVid >= 0x7C) { + V_x10000 = 0; + } else { + V_x10000 = 15500L - (125L * CpuVid); + } + } + + Power = V_x10000 * IddValue; + + switch (IddDiv) { + case 0: + *PowerInMw = Power / 10L; + break; + case 1: + *PowerInMw = Power / 100L; + break; + case 2: + *PowerInMw = Power / 1000L; + break; + default: + // IddDiv is set to an undefined value. This is due to either a misfused CPU, or + // an invalid P-state MSR write. + ASSERT (FALSE); + *PowerInMw = 0; + break; + } + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Calculates the frequency in megahertz of the desired P-state. + * + * @CpuServiceMethod{::F_CPU_GET_PSTATE_FREQ}. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] StateNumber The P-State to analyze. + * @param[out] FrequencyInMHz The P-State's frequency in MegaHertz + * @param[in] StdHeader Header for library and services + * + * @retval AGESA_SUCCESS Always Succeeds. + */ +AGESA_STATUS +F10GetPstateFrequency ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN UINT8 StateNumber, + OUT UINT32 *FrequencyInMHz, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 TempValue; + UINT32 CpuDid; + UINT32 CpuFid; + UINT64 MsrRegister; + + ASSERT (StateNumber < NM_PS_REG); + LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &MsrRegister, StdHeader); + ASSERT (((PSTATE_MSR *) &MsrRegister)->PsEnable == 1); + CpuDid = (UINT32) (((PSTATE_MSR *) &MsrRegister)->CpuDid); + CpuFid = (UINT32) (((PSTATE_MSR *) &MsrRegister)->CpuFid); + + switch (CpuDid) { + case 0: + TempValue = 1; + break; + case 1: + TempValue = 2; + break; + case 2: + TempValue = 4; + break; + case 3: + TempValue = 8; + break; + case 4: + TempValue = 16; + break; + default: + // CpuDid is set to an undefined value. This is due to either a misfused CPU, or + // an invalid P-state MSR write. + ASSERT (FALSE); + TempValue = 1; + break; + } + *FrequencyInMHz = (100 * (CpuFid + 0x10) / TempValue); + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Disables the desired P-state. + * + * @CpuServiceMethod{::F_CPU_DISABLE_PSTATE}. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] StateNumber The P-State to disable. + * @param[in] StdHeader Header for library and services + * + * @retval AGESA_SUCCESS Always succeeds. + */ +AGESA_STATUS +F10DisablePstate ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN UINT8 StateNumber, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT64 MsrRegister; + + ASSERT (StateNumber < NM_PS_REG); + LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &MsrRegister, StdHeader); + ((PSTATE_MSR *) &MsrRegister)->PsEnable = 0; + LibAmdMsrWrite (PS_REG_BASE + (UINT32) StateNumber, &MsrRegister, StdHeader); + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Transitions the executing core to the desired P-state. + * + * @CpuServiceMethod{::F_CPU_TRANSITION_PSTATE}. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] StateNumber The new P-State to make effective. + * @param[in] WaitForTransition True if the caller wants the transition completed upon return. + * @param[in] StdHeader Header for library and services + * + * @retval AGESA_SUCCESS Always Succeeds + */ +AGESA_STATUS +F10TransitionPstate ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN UINT8 StateNumber, + IN BOOLEAN WaitForTransition, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT64 MsrRegister; + + ASSERT (StateNumber < NM_PS_REG); + LibAmdMsrRead (PS_REG_BASE + (UINT32) StateNumber, &MsrRegister, StdHeader); + ASSERT (((PSTATE_MSR *) &MsrRegister)->PsEnable == 1); + LibAmdMsrRead (MSR_PSTATE_CTL, &MsrRegister, StdHeader); + ((PSTATE_CTRL_MSR *) &MsrRegister)->PstateCmd = (UINT64) StateNumber; + LibAmdMsrWrite (MSR_PSTATE_CTL, &MsrRegister, StdHeader); + if (WaitForTransition) { + do { + LibAmdMsrRead (MSR_PSTATE_STS, &MsrRegister, StdHeader); + } while (((PSTATE_STS_MSR *) &MsrRegister)->CurPstate != (UINT64) StateNumber); + } + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Determines the rate at which the executing core's time stamp counter is + * incrementing. + * + * @CpuServiceMethod{::F_CPU_GET_TSC_RATE}. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[out] FrequencyInMHz TSC actual frequency. + * @param[in] StdHeader Header for library and services. + * + * @return The most severe status of all called services + */ +AGESA_STATUS +F10GetTscRate ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + OUT UINT32 *FrequencyInMHz, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 Socket; + UINT32 Module; + UINT32 Ignored; + UINT64 MsrRegister; + PCI_ADDR PciAddress; + AGESA_STATUS IgnoredSts; + + LibAmdMsrRead (0xC0010015, &MsrRegister, StdHeader); + if ((MsrRegister & 0x01000000) != 0) { + return (FamilySpecificServices->GetPstateFrequency (FamilySpecificServices, 0, FrequencyInMHz, StdHeader)); + } else { + IdentifyCore (StdHeader, &Socket, &Module, &Ignored, &IgnoredSts); + GetPciAddress (StdHeader, Socket, Module, &PciAddress, &IgnoredSts); + return (FamilySpecificServices->GetNbFrequency (FamilySpecificServices, &PciAddress, FrequencyInMHz, &Ignored, StdHeader)); + } +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Determines the NB clock on the desired node. + * + * @CpuServiceMethod{::F_CPU_GET_NB_FREQ}. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] PciAddress The northbridge to query + * @param[out] FrequencyInMHz Northbridge clock frequency in MHz. + * @param[out] VoltageInuV Northbridge voltage in uV. + * @param[in] StdHeader Header for library and services + * + * @retval AGESA_UNSUPPORTED Unknown revs of F10 will return unsupported. + */ +AGESA_STATUS +F10GetNbFrequency ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN PCI_ADDR *PciAddress, + OUT UINT32 *FrequencyInMHz, + OUT UINT32 *VoltageInuV, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + // This was called by an unknown rev of F10 CPU. + return (AGESA_UNSUPPORTED); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Initially launches the desired core to run from the reset vector. + * + * @CpuServiceMethod{::F_CPU_AP_INITIAL_LAUNCH}. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] SocketNum The Processor on which the core is to be launched + * @param[in] ModuleNum The Module in that processor containing that core + * @param[in] CoreNum The Core to launch + * @param[in] PrimaryCoreNum The id of the module's primary core. + * @param[in] StdHeader Header for library and services + * + * @retval TRUE The core was launched + * @retval FALSE The core was previously launched + */ +BOOLEAN +F10LaunchApCore ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN UINT32 SocketNum, + IN UINT32 ModuleNum, + IN UINT32 CoreNum, + IN UINT32 PrimaryCoreNum, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 NodeRelativeCoreNum; + UINT32 PciRegister; + PCI_ADDR PciAddress; + BOOLEAN LaunchFlag; + AGESA_STATUS Ignored; + + // Code Start + LaunchFlag = FALSE; + NodeRelativeCoreNum = CoreNum - PrimaryCoreNum; + GetPciAddress (StdHeader, SocketNum, ModuleNum, &PciAddress, &Ignored); + PciAddress.Address.Function = FUNC_0; + + switch (NodeRelativeCoreNum) { + case 0: + PciAddress.Address.Register = HT_INIT_CTRL; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + if ((PciRegister & HT_INIT_CTRL_REQ_DIS) != 0) { + PciRegister &= ~HT_INIT_CTRL_REQ_DIS; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); + LaunchFlag = TRUE; + } else { + LaunchFlag = FALSE; + } + break; + + case 1: + PciAddress.Address.Register = HT_TRANS_CTRL; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + if ((PciRegister & HT_TRANS_CTRL_CPU1_EN) == 0) { + PciRegister |= HT_TRANS_CTRL_CPU1_EN; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); + LaunchFlag = TRUE; + } else { + LaunchFlag = FALSE; + } + break; + + case 2: + PciAddress.Address.Register = ECS_HT_TRANS_CTRL; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + + if ((PciRegister & ECS_HT_TRANS_CTRL_CPU2_EN) == 0) { + PciRegister |= ECS_HT_TRANS_CTRL_CPU2_EN; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, + StdHeader); + LaunchFlag = TRUE; + } else { + LaunchFlag = FALSE; + } + break; + + case 3: + PciAddress.Address.Register = ECS_HT_TRANS_CTRL; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + if ((PciRegister & ECS_HT_TRANS_CTRL_CPU3_EN) == 0) { + PciRegister |= ECS_HT_TRANS_CTRL_CPU3_EN; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); + LaunchFlag = TRUE; + } else { + LaunchFlag = FALSE; + } + break; + + case 4: + PciAddress.Address.Register = ECS_HT_TRANS_CTRL; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + if ((PciRegister & ECS_HT_TRANS_CTRL_CPU4_EN) == 0) { + PciRegister |= ECS_HT_TRANS_CTRL_CPU4_EN; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); + LaunchFlag = TRUE; + } else { + LaunchFlag = FALSE; + } + break; + + case 5: + PciAddress.Address.Register = ECS_HT_TRANS_CTRL; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + if ((PciRegister & ECS_HT_TRANS_CTRL_CPU5_EN) == 0) { + PciRegister |= ECS_HT_TRANS_CTRL_CPU5_EN; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); + LaunchFlag = TRUE; + } else { + LaunchFlag = FALSE; + } + break; + + + default: + break; + } + + return (LaunchFlag); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * This function will return the CpuFid and CpuDid in MHz, using the formula + * described in the BKDG MSRC001_00[68:64] P-State [4:0] Registers:bit 8:0 + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] PStateNumber P-state number to check. + * @param[in] Frequency Leveled target frequency for PStateNumber. + * @param[out] *CpuFidPtr New leveled FID. + * @param[out] *CpuDidPtr1 New leveled DID info 1. + * @param[out] *CpuDidPtr2 New leveled DID info 2. + * @param[in] *StdHeader Header for library and services. + * + * @retval AGESA_WARNING This P-State does not need to be modified. + * @retval AGESA_SUCCESS This P-State must be modified to be level. + */ +AGESA_STATUS +F10GetFrequencyXlatRegInfo ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN UINT8 PStateNumber, + IN UINT32 Frequency, + OUT UINT32 *CpuFidPtr, + OUT UINT32 *CpuDidPtr1, + OUT UINT32 *CpuDidPtr2, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 i; + UINT32 j; + AGESA_STATUS Status; + UINT32 FrequencyInMHz; + + FrequencyInMHz = 0; + *CpuDidPtr2 = 0xFFFF; + + Status = AGESA_SUCCESS; + + FamilySpecificServices->GetPstateFrequency (FamilySpecificServices, PStateNumber, &FrequencyInMHz, StdHeader); + if (FrequencyInMHz == Frequency) { + Status |= AGESA_WARNING; + } + + // CPU Frequency = 100 MHz * (CpuFid + 10h) / (2^CpuDid) + // In this for loop i = 2^CpuDid + + + for (i = 1; i < 17; (i += i)) { + for (j = 0; j < 64; j++) { + if (Frequency == ((100 * (j + 0x10)) / i )) { + *CpuFidPtr = j; + if (i == 1) { + *CpuDidPtr1 = 0; + } else if (i == 2) { + *CpuDidPtr1 = 1; + } else if (i == 4) { + *CpuDidPtr1 = 2; + } else if (i == 8) { + *CpuDidPtr1 = 3; + } else if (i == 16) { + *CpuDidPtr1 = 4; + } else { + *CpuFidPtr = 0xFFFF; + *CpuDidPtr1 = 0xFFFF; + } + // Success + return Status; + } + } + } + + // Error Condition + *CpuFidPtr = 0x00FF; + *CpuDidPtr1 = 0x00FF; + *CpuDidPtr2 = 0x00FF; + + return AGESA_ERROR; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * This function sets the Pstate MSR to each APs base on Pstate Buffer. + * + * @CpuServiceMethod{::F_CPU_SET_PSTATE_LEVELING_REG}. + * + * This function should be called for every core in the system. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] CpuAmdPState Gathered P-state data structure for whole system. + * @param[in] StdHeader Config for library and services. + * + * @retval AGESA_STATUS @todo document return *values*. + * + */ +AGESA_STATUS +F10PstateLevelingCoreMsrModify ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN S_CPU_AMD_PSTATE *CpuAmdPState, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 i; + UINT32 Ignored; + UINT32 k; + UINT32 TempVar_d; + UINT32 TempVar_e; + UINT32 TempVar_f; + UINT64 MsrValue; + AGESA_STATUS Status; + UINT32 Socket; + UINT32 Module; + UINT32 Core; + PSTATE_LEVELING *PStateBufferPtr; + PSTATE_LEVELING *PStateBufferPtrTmp; + S_CPU_AMD_PSTATE *CpuAmdPstatePtr; + UINT32 LogicalSocketCount; + PCI_ADDR PciAddress; + UINT32 PciRegister; + + Ignored = 0; + CpuAmdPstatePtr = (S_CPU_AMD_PSTATE *) CpuAmdPState; + PStateBufferPtrTmp = CpuAmdPstatePtr->PStateLevelingStruc; + PStateBufferPtr = CpuAmdPstatePtr->PStateLevelingStruc; + LogicalSocketCount = CpuAmdPstatePtr->TotalSocketInSystem; + PciAddress.AddressValue = 0; + + // + //Try to find the Pstate buffer specific to this core(socket). + // + IdentifyCore (StdHeader, &Socket, &Module, &Core, &Status); + for (i = 0; i < LogicalSocketCount; i++) { + CpuGetPStateLevelStructure (&PStateBufferPtrTmp, CpuAmdPstatePtr, i, StdHeader); + if (PStateBufferPtrTmp->SocketNumber == Socket) { + break; + } + } + + if (PStateBufferPtr[0].OnlyOneEnabledPState) { + // + //If all processors have only 1 enabled P-state, the following sequence should be performed on all cores: + // + + //1. Write the appropriate CpuFid value resulting from the matched CPU COF to MSRC001_0064[CpuFid]. + LibAmdMsrRead (MSR_PSTATE_0, &MsrValue, StdHeader); + Status = F10GetFrequencyXlatRegInfo (FamilySpecificServices, 0, PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].CoreFreq, &TempVar_d, &TempVar_e, &Ignored, StdHeader); + // Bits 5:0 + ((PSTATE_MSR *) &MsrValue)->CpuFid = TempVar_d; + // Bits 8:6 + ((PSTATE_MSR *) &MsrValue)->CpuDid = TempVar_e; + // Bits 39:32 + ((PSTATE_MSR *) &MsrValue)->IddValue = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].IddValue; + // Bits 41:40 + ((PSTATE_MSR *) &MsrValue)->IddDiv = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[0].IddDiv; + // Enable the P-State + ((PSTATE_MSR *) &MsrValue)->PsEnable = 1; + LibAmdMsrWrite (MSR_PSTATE_0, &MsrValue, StdHeader); + + //2. Copy MSRC001_0064 to MSRC001_0065. + LibAmdMsrWrite (MSR_PSTATE_1, &MsrValue, StdHeader); + + //3. Write 001b to F3xDC[PstatemaxVal]. + GetPciAddress (StdHeader, Socket, Module, &PciAddress, &Status); + PciAddress.Address.Register = CPTC2_REG; + PciAddress.Address.Function = FUNC_3; + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + ((CLK_PWR_TIMING_CTRL2_REGISTER *) &PciRegister)->PstateMaxVal = 1; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); + + //4. Write 001b to MSRC001_0062[PstateCmd]. + FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 1, (BOOLEAN) FALSE, StdHeader); + + //5. Wait for MSRC001_0071[CurCpuFid] = MSRC001_0065[CpuFid]. + do { + LibAmdMsrRead (MSR_COFVID_STS, &MsrValue, StdHeader); + } while (((COFVID_STS_MSR *) &MsrValue)->CurCpuFid != TempVar_d); + + //6. Write 000b to MSRC001_0062[PstateCmd]. + FamilySpecificServices->TransitionPstate (FamilySpecificServices, (UINT8) 0, (BOOLEAN) FALSE, StdHeader); + + //7. Wait for MSRC001_0071[CurCpuFid] = MSRC001_0064[CpuFid]. + do { + LibAmdMsrRead (MSR_COFVID_STS, &MsrValue, StdHeader); + } while (((COFVID_STS_MSR *) &MsrValue)->CurCpuFid != TempVar_d); + + //8. Write 0b to MSRC001_0065[PstateEn]. + LibAmdMsrRead (MSR_PSTATE_1, &MsrValue, StdHeader); + ((PSTATE_MSR *) &MsrValue)->PsEnable = 0; + LibAmdMsrWrite (MSR_PSTATE_1, &MsrValue, StdHeader); + + //9. Write 000b to F3xDC[PstateMaxVal] and exit the sequence (no further steps are required). + LibAmdPciRead (AccessWidth32, PciAddress, &PciRegister, StdHeader); + ((CLK_PWR_TIMING_CTRL2_REGISTER *) &PciRegister)->PstateMaxVal = 0; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciRegister, StdHeader); + + } else { + TempVar_f = MSR_PSTATE_0; + + for (k = 0; k <= PStateBufferPtrTmp->PStateCoreStruct[0].PStateMaxValue; k++, TempVar_f++) { + // If pState is not disabled then do update + LibAmdMsrRead (TempVar_f, &MsrValue, StdHeader); + + if (PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].PStateEnable == 1) { + Status = F10GetFrequencyXlatRegInfo (FamilySpecificServices, (UINT8) k, PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].CoreFreq, &TempVar_d, &TempVar_e, &Ignored, StdHeader); + if (Status != AGESA_ERROR) { + // Bits 5:0 + ((PSTATE_MSR *) &MsrValue)->CpuFid = TempVar_d; + // Bits 8:6 + ((PSTATE_MSR *) &MsrValue)->CpuDid = TempVar_e; + } + + // Bits 39:32 + ((PSTATE_MSR *) &MsrValue)->IddValue = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].IddValue; + // Bits 41:40 + ((PSTATE_MSR *) &MsrValue)->IddDiv = PStateBufferPtrTmp->PStateCoreStruct[0].PStateStruct[k].IddDiv; + // Enable the P-State + ((PSTATE_MSR *) &MsrValue)->PsEnable = 1; + LibAmdMsrWrite (TempVar_f, &MsrValue, StdHeader); + } else { + // Disable the P-State + ((PSTATE_MSR *) &MsrValue)->PsEnable = 0; + LibAmdMsrWrite (TempVar_f, &MsrValue, StdHeader); + } + } + } + return AGESA_SUCCESS; +} + +/** + *--------------------------------------------------------------------------------------- + * + * F10GetPowerStepValueInTime + * + * Description: + * Convert power step value in time + * + * Parameters: + * @param[out] *PowerStepPtr + * + * @retval VOID + * + *--------------------------------------------------------------------------------------- + **/ +STATIC VOID +F10GetPowerStepValueInTime ( + IN OUT UINT32 *PowerStepPtr + ) +{ + UINT32 TempVar_a; + + TempVar_a = *PowerStepPtr; + + if (TempVar_a < 0x4) { + *PowerStepPtr = 400 - (TempVar_a * 100); + } else if (TempVar_a < 0x9) { + *PowerStepPtr = 130 - (TempVar_a * 10); + } else { + *PowerStepPtr = 90 - (TempVar_a * 5); + } +} + + +/** + *--------------------------------------------------------------------------------------- + * + * F10GetPllValueInTime + * + * Description: + * Convert PLL Value in time + * + * Parameters: + * @param[out] *PllLockTimePtr + * + * @retval VOID + * + *--------------------------------------------------------------------------------------- + **/ +STATIC VOID +F10GetPllValueInTime ( + IN OUT UINT32 *PllLockTimePtr + ) +{ + if (*PllLockTimePtr < 4) { + *PllLockTimePtr = *PllLockTimePtr + 1; + } else if (*PllLockTimePtr == 4) { + *PllLockTimePtr = 8; + } else if (*PllLockTimePtr == 5) { + *PllLockTimePtr = 16; + } else + *PllLockTimePtr = 0; +} +/*---------------------------------------------------------------------------------------*/ +/** + * Get Pstate Transition Latency. + * + * @CpuServiceMethod{::F_CPU_PSTATE_TRANSITION_LATENCY}. + * + * Calculate TransitionLatency by power step value and pll value. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] PStateLevelingBufferStructPtr Pstate row data buffer pointer + * @param[in] PciAddress Pci address + * @param[out] TransitionLatency The transition latency. + * @param[in] StdHeader Header for library and services + * + * @retval AGESA_SUCCESS Always succeeds. + */ +AGESA_STATUS +F10GetPstateTransLatency ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN PSTATE_LEVELING *PStateLevelingBufferStructPtr, + IN PCI_ADDR *PciAddress, + OUT UINT32 *TransitionLatency, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 TempVar_b; + UINT32 TempVar_c; + UINT32 TempVar_d; + UINT32 TempVar8_a; + UINT32 TempVar8_b; + UINT32 Ignored; + UINT32 k; + UINT32 CpuFidSameFlag; + UINT8 PStateMaxValueOnCurrentCore; + UINT32 TransAndBusMastLatency; + + CpuFidSameFlag = 1; + + F10GetFrequencyXlatRegInfo ( + FamilySpecificServices, + 0, + PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[0].CoreFreq, + &TempVar_b, + &TempVar_c, + &Ignored, + StdHeader + ); + + TempVar_d = TempVar_b; + PStateMaxValueOnCurrentCore = PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateMaxValue; + + // + //Check if MSRC001_00[68:64][CpuFid] is the same value for all P-states where + //MSRC001_00[68:64][PstateEn]=1 + // + for (k = 1; k <= PStateMaxValueOnCurrentCore; k++) { + if (PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[k].PStateEnable != 0) { + F10GetFrequencyXlatRegInfo ( + FamilySpecificServices, + (UINT8) k, + PStateLevelingBufferStructPtr->PStateCoreStruct[0].PStateStruct[k].CoreFreq, + &TempVar_b, + &TempVar_c, + &Ignored, + StdHeader + ); + } + + if (TempVar_d != TempVar_b) { + CpuFidSameFlag = 0; + break; + } + } + + PciAddress->Address.Register = 0xD4; + PciAddress->Address.Function = FUNC_3; + LibAmdPciRead (AccessWidth32, *PciAddress, &TempVar_d, StdHeader); + + // PowerStepDown - Bits 20:23 + TempVar8_a = (TempVar_d & 0x00F00000) >> 20; + + // PowerStepUp - Bits 24:27 + TempVar8_b = (TempVar_d & 0x0F000000) >> 24; + + // Convert the raw numbers in TempVar8_a and TempVar8_b into time + F10GetPowerStepValueInTime (&TempVar8_a); + F10GetPowerStepValueInTime (&TempVar8_b); + + // + //(12 * (F3xD4[PowerStepDown] + F3xD4[PowerStepUp]) /1000) us + // + TransAndBusMastLatency = + (12 * (TempVar8_a + TempVar8_b) + 999) / 1000; + + if (CpuFidSameFlag == 0) { + // + //+ F3xA0[PllLockTime] + // + PciAddress->Address.Register = 0xA0; + LibAmdPciRead (AccessWidth32, *PciAddress, &TempVar_d, StdHeader); + + TempVar8_a = (0x00003800 & TempVar_d) >> 11; + F10GetPllValueInTime (&TempVar8_a); + TransAndBusMastLatency += TempVar8_a; + } + + *TransitionLatency = TransAndBusMastLatency; + + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Get CPU pstate register Informations. + * + * @CpuServiceMethod{::F_CPU_GET_PSTATE_REGISTER_INFO}. + * + * This function will check if PState is Enabled by reading MSR. + * This function also returns the MSR Value, that contains IddValue, IddDiv. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] PState Input Pstate number for query. + * @param[out] PStateEnabled Boolean flag return pstate enable. + * @param[in,out] IddVal Pstate current value. + * @param[in,out] IddDiv Pstate current divisor. + * @param[in] StdHeader Handle of Header for calling lib functions and services. + * + * @retval AGESA_SUCCESS Always succeeds. + */ +AGESA_STATUS +F10GetPstateRegisterInfo ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN UINT32 PState, + OUT BOOLEAN *PStateEnabled, + IN OUT UINT32 *IddVal, + IN OUT UINT32 *IddDiv, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT64 MsrRegister; + + ASSERT (PState < NM_PS_REG); + + // Read PSTATE MSRs + LibAmdMsrRead (PS_REG_BASE + (UINT32) PState, &MsrRegister, StdHeader); + + if (((PSTATE_MSR *) &MsrRegister)->PsEnable == 1) { + // PState enable = bit 63 + *PStateEnabled = TRUE; + } else { + *PStateEnabled = FALSE; + } + + // Bits 39:32 (high 32 bits [7:0]) + *IddVal = (UINT32) ((PSTATE_MSR *) &MsrRegister)->IddValue; + // Bits 41:40 (high 32 bits [9:8]) + *IddDiv = (UINT32) ((PSTATE_MSR *) &MsrRegister)->IddDiv; + + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Get CPU pstate max state. + * + * @CpuServiceMethod{::F_CPU_GET_PSTATE_MAX_STATE}. + * + * This function returns the MaxPStateNumber. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[out] MaxPStateNumber Boolean flag return pstate enable. + * @param[in] StdHeader Handle of Header for calling lib functions and services. + * + * @retval AGESA_SUCCESS Always succeeds. + */ +AGESA_STATUS +F10GetPstateMaxState ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + OUT UINT32 *MaxPStateNumber, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT64 MsrValue; + + // + // Read PstateMaxVal [6:4] from MSR C001_0061 + // So, we will know the max pstate state in this socket. + // + LibAmdMsrRead (MSR_PSTATE_CURRENT_LIMIT, &MsrValue, StdHeader); + *MaxPStateNumber = (UINT32) (((PSTATE_CURLIM_MSR *) & MsrValue)->PstateMaxVal); + + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Get CPU Specific Platform Type Info. + * + * @CpuServiceMethod{::F_CPU_GET_PLATFORM_TYPE_SPECIFIC_INFO}. + * + * This function returns Returns the platform features. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in,out] Features The Features supported by this platform. + * @param[in] StdHeader Handle of Header for calling lib functions and services. + * + * @retval AGESA_SUCCESS Always succeeds. + */ +AGESA_STATUS +F10GetPlatformTypeSpecificInfo ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN OUT PLATFORM_FEATS *Features, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + return (AGESA_SUCCESS); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Provide the features of the given HT link. + * + * @CpuServiceMethod{::F_GET_HT_LINK_FEATURES}. + * + * This method is different than the HT Phy Features method, because for the phy registers + * sublink 1 matches and should be programmed if the link is ganged but for PCI config + * registers sublink 1 is reserved if the link is ganged. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[out] Link The link number, for accessing non-capability set registers. + * @param[in] LinkBase The base HT Host capability PCI address for the link. + * @param[out] HtHostFeats The link's features. + * @param[in] StdHeader Standard Head Pointer + */ +VOID +F10GetHtLinkFeatures ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + OUT UINTN *Link, + IN PCI_ADDR *LinkBase, + OUT HT_HOST_FEATS *HtHostFeats, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + PCI_ADDR PciAddress; + UINT32 RegValue; + UINT32 ExtendedFreq; + UINTN LinkOffset; + + ASSERT (FamilySpecificServices != NULL); + + // No features present unless link is good and connected. + HtHostFeats->HtHostValue = 0; + + // Compute link number + *Link = (((LinkBase->Address.Function == 4) ? 4 : 0) + ((LinkBase->Address.Register - 0x80) >> 5)); + + // Check coherency (HTHOST_LINK_TYPE_REG = 0x18) + PciAddress = *LinkBase; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET; + LibAmdPciReadBits (PciAddress, 4, 0, &RegValue, StdHeader); + if (RegValue == 3) { + HtHostFeats->HtHostFeatures.Coherent = 1; + } else if (RegValue == 7) { + HtHostFeats->HtHostFeatures.NonCoherent = 1; + } + + // If link was not connected, don't check other attributes, make sure + // to return zero, no match. + if ((HtHostFeats->HtHostFeatures.Coherent == 1) || (HtHostFeats->HtHostFeatures.NonCoherent == 1)) { + // Check gen3 + PciAddress = *LinkBase; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ; + LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader); + PciAddress = *LinkBase; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET; + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8)); + if (RegValue > 6) { + HtHostFeats->HtHostFeatures.Ht3 = 1; + } else { + HtHostFeats->HtHostFeatures.Ht1 = 1; + } + // Check ganged. + LinkOffset = (*Link) * 4; + PciAddress = *LinkBase; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = ((UINT32)LinkOffset + 0x170); + LibAmdPciReadBits (PciAddress, 0, 0, &RegValue, StdHeader); + if (RegValue == 0) { + HtHostFeats->HtHostFeatures.UnGanged = 1; + } else { + HtHostFeats->HtHostFeatures.Ganged = 1; + } + } +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Checks to see if the HT phy register table entry should be applied + * + * @CpuServiceMethod{::F_DOES_LINK_HAVE_HTFPY_FEATS}. + * + * This function determines if the link type field matches the HT link + * passed in. + * + * This method will match for sublink 1 if the link is ganged and sublink 0 matches. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] CapabilitySet Address of the HT capability block + * @param[in] Link Zero based HT link to check + * @param[in] HtPhyLinkType Link type field from a register table entry to compare against + * @param[out] MatchedSublink1 TRUE: It is actually just sublink 1 that matches, FALSE: any other condition. + * @param[out] Frequency0 The frequency of sublink0 (200 MHz if not connected). + * @param[out] Frequency1 The frequency of sublink1 (200 MHz if not connected). + * @param[in] StdHeader Standard Head Pointer + * + * @retval TRUE Link matches + * @retval FALSE Link does not match + * + */ +BOOLEAN +F10DoesLinkHaveHtPhyFeats ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN PCI_ADDR CapabilitySet, + IN UINT32 Link, + IN HT_PHY_LINK_FEATS *HtPhyLinkType, + OUT BOOLEAN *MatchedSublink1, + OUT HT_FREQUENCIES *Frequency0, + OUT HT_FREQUENCIES *Frequency1, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 RegValue; + UINT32 ExtendedFreq; + PCI_ADDR PciAddress; + PCI_ADDR SubLink1Address; + HT_PHY_LINK_FEATS LinkType; + BOOLEAN IsReallyCheckingBoth; + + ASSERT (Link < 4); + ASSERT (HtPhyLinkType != NULL); + // error checks: No unknown link type bits set and not a "match none" + ASSERT ((HtPhyLinkType->HtPhyLinkValue & ~(HTPHY_LINKTYPE_ALL)) == 0); + ASSERT (HtPhyLinkType->HtPhyLinkValue != 0); + + *Frequency0 = 0; + *Frequency1 = 0; + IsReallyCheckingBoth = FALSE; + *MatchedSublink1 = FALSE; + LinkType.HtPhyLinkValue = 0; + + // Set the link indicators. This assumes each sublink set is contiguous, that is, links 3, 2, 1, 0 and 7, 6, 5, 4. + LinkType.HtPhyLinkValue |= (HTPHY_LINKTYPE_SL0_LINK0 << Link); + LinkType.HtPhyLinkValue |= (HTPHY_LINKTYPE_SL1_LINK4 << Link); + + // if ganged, don't read sublink 1, but use sublink 0 to check. + SubLink1Address = CapabilitySet; + + // Check ganged. Since we got called for sublink 0, sublink 1 is implemented also, + // but only access it if it is also unganged. + Link *= 4; + PciAddress = CapabilitySet; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = (Link + 0x170); + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + RegValue = (RegValue & 0x01); + if (RegValue == 0) { + // Then really read sublink1, rather than using sublink0 + SubLink1Address.Address.Function = 4; + IsReallyCheckingBoth = TRUE; + } + + // Checks for Sublink 0 + + // Check coherency (HTHOST_LINK_TYPE_REG = 0x18) + PciAddress = CapabilitySet; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET; + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + if ((RegValue & 0x1F) == 3) { + LinkType.HtPhyLinkFeatures.HtPhySL0Coh = 1; + } else if ((RegValue & 0x1F) == 7) { + LinkType.HtPhyLinkFeatures.HtPhySL0NonCoh = 1; + } + + // If link was not connected, don't check other attributes, make sure + // to return zero, no match. (Phy may be powered off.) + if ((LinkType.HtPhyLinkFeatures.HtPhySL0Coh) || (LinkType.HtPhyLinkFeatures.HtPhySL0NonCoh)) { + // Check gen3 + PciAddress = CapabilitySet; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ; + LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader); + PciAddress = CapabilitySet; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET; + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8)); + *Frequency0 = RegValue; + if (RegValue > 6) { + LinkType.HtPhyLinkFeatures.HtPhySL0Ht3 = 1; + } else { + LinkType.HtPhyLinkFeatures.HtPhySL0Ht1 = 1; + } + } else { + LinkType.HtPhyLinkValue &= ~(HTPHY_LINKTYPE_SL0_ALL); + } + + // Checks for Sublink 1 + // Check coherency (HTHOST_LINK_TYPE_REG = 0x18) + PciAddress = SubLink1Address; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_TYPE_REG_OFFSET; + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + if ((RegValue & 0x1F) == 3) { + LinkType.HtPhyLinkFeatures.HtPhySL1Coh = 1; + } else if ((RegValue & 0x1F) == 7) { + LinkType.HtPhyLinkFeatures.HtPhySL1NonCoh = 1; + } + + if ((LinkType.HtPhyLinkFeatures.HtPhySL1Coh) || (LinkType.HtPhyLinkFeatures.HtPhySL1NonCoh)) { + // Check gen3 + PciAddress = SubLink1Address; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_EXTENDED_FREQ; + LibAmdPciRead (AccessWidth32, PciAddress, &ExtendedFreq, StdHeader); + PciAddress = SubLink1Address; + PciAddress.Address.Register = PciAddress.Address.Register + HT_LINK_FREQ_OFFSET; + LibAmdPciRead (AccessWidth32, PciAddress, &RegValue, StdHeader); + RegValue = (((ExtendedFreq & 0x1) << 4) | ((RegValue & 0x00000F00) >> 8)); + *Frequency1 = RegValue; + if (RegValue > 6) { + LinkType.HtPhyLinkFeatures.HtPhySL1Ht3 = 1; + } else { + LinkType.HtPhyLinkFeatures.HtPhySL1Ht1 = 1; + } + } else { + LinkType.HtPhyLinkValue &= ~(HTPHY_LINKTYPE_SL1_ALL); + } + + // For Deemphasis checking, indicate whether it was actually sublink 1 that matched. + // If the link is ganged or only sublink 0 matched, or the link features didn't match, this is false. + if ((LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue) != 0) { + if (IsReallyCheckingBoth && + (((LinkType.HtPhyLinkValue & HtPhyLinkType->HtPhyLinkValue) & (HTPHY_LINKTYPE_SL1_ALL)) != 0)) { + *MatchedSublink1 = TRUE; + } + return TRUE; // Link matches at least one of the desired characteristics + } else { + return FALSE; // Link does not match any criteria + } +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Applies an HT Phy read-modify-write based on an HT Phy register table entry. + * + * @CpuServiceMethod{::F_SET_HT_PHY_REGISTER}. + * + * This function performs the necessary sequence of PCI reads, writes, and waits + * necessary to program an HT Phy register. + * + * @param[in] FamilySpecificServices The current Family Specific Services. + * @param[in] HtPhyEntry HT Phy register table entry to apply + * @param[in] CapabilitySet The link's HT Host base address. + * @param[in] Link Zero based, node, link number (not package link). + * @param[in] StdHeader Config handle for library and services + * + */ +VOID +F10SetHtPhyRegister ( + IN CPU_SPECIFIC_SERVICES *FamilySpecificServices, + IN HT_PHY_TYPE_ENTRY_DATA *HtPhyEntry, + IN PCI_ADDR CapabilitySet, + IN UINT32 Link, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 Temp; + UINT32 PhyReg; + PCI_ADDR PhyBase; + + // Determine the PCI config address of the HT Phy portal + PhyBase = CapabilitySet; + PhyBase.Address.Function = FUNC_4; + PhyBase.Address.Register = ((Link << 3) + REG_HT4_PHY_OFFSET_BASE_4X180); + + LibAmdPciRead (AccessWidth32, PhyBase, &PhyReg, StdHeader); + + // Handle direct map registers if needed + PhyReg &= ~(HTPHY_DIRECT_OFFSET_MASK); + if (HtPhyEntry->Address > 0x1FF) { + PhyReg |= HTPHY_DIRECT_MAP; + } + + PhyReg |= (HtPhyEntry->Address); + // Ask the portal to read the HT Phy Register contents + LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader); + do + { + LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader); + } while (!(Temp & HTPHY_IS_COMPLETE_MASK)); + + // Get the current register contents and do the update requested by the table + PhyBase.AddressValue += 4; + LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader); + Temp &= ~(HtPhyEntry->Mask); + Temp |= (HtPhyEntry->Data); + LibAmdPciWrite (AccessWidth32, PhyBase, &Temp, StdHeader); + + PhyBase.AddressValue -= 4; + // Ask the portal to write our updated value to the HT Phy + PhyReg |= HTPHY_WRITE_CMD; + LibAmdPciWrite (AccessWidth32, PhyBase, &PhyReg, StdHeader); + do + { + LibAmdPciRead (AccessWidth32, PhyBase, &Temp, StdHeader); + } while (!(Temp & HTPHY_IS_COMPLETE_MASK)); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Set the HT Link Token Count registers (F3X1[54,50,4C,48]). + * + * @TableEntryTypeMethod{::HtTokenPciRegister}. + * + * Make the current core's PCI address with the function and register for the entry. + * For all HT links, check the link's feature set for a match to the entry. + * Read - Modify - Write the PCI register, clearing masked bits, and setting the data bits. + * + * @param[in] Entry The Link Token register entry to perform + * @param[in] PlatformConfig Config handle for platform specific information + * @param[in] StdHeader Config handle for library and services. + * + */ +VOID +F10SetRegisterForHtLinkTokenEntry ( + IN TABLE_ENTRY_DATA *Entry, + IN PLATFORM_CONFIGURATION *PlatformConfig, + IN AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINTN Link; + UINTN LinkCount; + UINT32 MySocket; + UINT32 MyModule; + AGESA_STATUS IgnoredStatus; + UINT32 Ignored; + CPU_LOGICAL_ID CpuFamilyRevision; + CPU_SPECIFIC_SERVICES *FamilySpecificServices; + PCI_ADDR CapabilitySet; + HT_HOST_FEATS HtHostFeats; + PERFORMANCE_PROFILE_FEATS PlatformProfile; + UINTN ProcessorCount; + UINT32 RegisterData; + PCI_ADDR PciAddress; + + // Errors: Possible values in unused entry space, extra type features, value range checks. + // Check that the entry type is correct and the actual supplied entry data is appropriate for that entry. + ASSERT (((Entry->HtTokenEntry.LinkFeats.HtHostValue & ~((HT_HOST_FEATURES_ALL) | (HT_HOST_AND))) == 0) && + ((Entry->HtTokenEntry.PerformanceFeats.PerformanceProfileValue & ~((PERFORMANCE_PROFILE_ALL) | (PERFORMANCE_AND))) == 0) && + (Entry->HtTokenEntry.Mask != 0)); + + HtHostFeats.HtHostValue = 0; + IdentifyCore (StdHeader, &MySocket, &MyModule, &Ignored, &IgnoredStatus); + GetPciAddress (StdHeader, MySocket, MyModule, &CapabilitySet, &IgnoredStatus); + GetLogicalIdOfCurrentCore (&CpuFamilyRevision, StdHeader); + GetCpuServicesFromLogicalId (&CpuFamilyRevision, &FamilySpecificServices, StdHeader); + + // Check if the actual processor count is in either range. + ProcessorCount = GetNumberOfProcessors (StdHeader); + if (IsEitherCountInRange (ProcessorCount, ProcessorCount, Entry->HtTokenEntry.ProcessorCounts.ProcessorCountRanges)) { + // Check for any performance profile features. + GetPerformanceFeatures (&PlatformProfile, PlatformConfig, StdHeader); + if (DoesEntryTypeSpecificInfoMatch (PlatformProfile.PerformanceProfileValue, + Entry->HtTokenEntry.PerformanceFeats.PerformanceProfileValue)) { + // Check the link features. + LinkCount = 0; + while (LinkCount < 4) { + if (FindHtHostCapability (LinkCount, &CapabilitySet, StdHeader)) { + FamilySpecificServices->GetHtLinkFeatures (FamilySpecificServices, &Link, &CapabilitySet, &HtHostFeats, StdHeader); + if (DoesEntryTypeSpecificInfoMatch (HtHostFeats.HtHostValue, Entry->HtTokenEntry.LinkFeats.HtHostValue)) { + // Do the HT Host PCI register update. + PciAddress = CapabilitySet; + PciAddress.Address.Function = 3; + PciAddress.Address.Register = LINK_TO_XCS_TOKEN_COUNT_REG_3X148 + ((UINT32)Link * 4); + LibAmdPciRead (AccessWidth32, PciAddress, &RegisterData, StdHeader); + RegisterData = RegisterData & (~(Entry->HtTokenEntry.Mask)); + RegisterData = RegisterData | Entry->HtTokenEntry.Data; + LibAmdPciWrite (AccessWidth32, PciAddress, &RegisterData, StdHeader); + } + } else { + // No more Capabilities. + break; + } + LinkCount ++; + } + } + } +} + |