diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/Proc/Recovery/HT/htInitReset.c')
-rw-r--r-- | src/vendorcode/amd/agesa/Proc/Recovery/HT/htInitReset.c | 332 |
1 files changed, 332 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/Proc/Recovery/HT/htInitReset.c b/src/vendorcode/amd/agesa/Proc/Recovery/HT/htInitReset.c new file mode 100644 index 0000000000..9d58026823 --- /dev/null +++ b/src/vendorcode/amd/agesa/Proc/Recovery/HT/htInitReset.c @@ -0,0 +1,332 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * Recovery HT, a Hypertransport init for Boot Blocks. For normal + * boots, run Recovery HT first in boot block, then run full HT init + * in the system BIOS. Recovery HT moves the devices on the chain with + * the southbridge to their assigned device IDS, so that all their PCI + * Config space is accessible. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Recovery HyperTransport + * @e \$Revision: 35740 $ @e \$Date: 2010-07-30 00:04:17 +0800 (Fri, 30 Jul 2010) $ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "AdvancedApi.h" +#include "GeneralServices.h" +#include "Filecode.h" +CODE_GROUP (G2_PEI) +RDATA_GROUP (G2_PEI) + +#define FILECODE PROC_RECOVERY_HT_HTINITRESET_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define MAX_NODES 1 +#define MAX_LINKS 8 + +extern CONST AMD_HT_RESET_INTERFACE HtOptionResetDefaults; + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ + +/** + * Our global state data structure. + * + * Keep track of inputs and outputs, and keep any working state. + */ +typedef struct { + AMD_HT_RESET_INTERFACE *HtBlock; ///< The interface + AGESA_STATUS Status; ///< Remember the highest severity status event + VOID *ConfigHandle; ///< Config Pointer, opaque handle for passing to lib +} HTR_STATE_DATA; + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + +/*************************************************************************** + *** FAMILY/NORTHBRIDGE SPECIFIC FUNCTIONS *** + ***************************************************************************/ + +/*----------------------------------------------------------------------------------------*/ +/** + * Enable Routing Tables. + * + * Turns routing tables on for a node zero. + * + * @param[in] State Our State + */ + +VOID +STATIC +HtrEnableRoutingTables ( + IN HTR_STATE_DATA *State + ) +{ + PCI_ADDR Reg; + UINT32 Temp; + Temp = 0; + Reg.AddressValue = MAKE_SBDFO (0, 0, 24, 0, 0x6C); + LibAmdPciWriteBits (Reg, 0, 0, &Temp, State->ConfigHandle); +} + +/*************************************************************************** + *** Non-coherent init code *** + *** Algorithms *** + ***************************************************************************/ +/*----------------------------------------------------------------------------------------*/ +/** + * Process the SouthBridge Link. + * + * Process a non-coherent link, and setting the device ID for all devices found. + * + * @param[in] State Our State, Inputs + */ +VOID +STATIC +HtrProcessLink ( + IN HTR_STATE_DATA *State + ) +{ + UINT32 CurrentBUID; + UINT32 Temp; + UINT32 UnitIDcnt; + PCI_ADDR CurrentPtr; + UINT8 Depth; + BUID_SWAP_LIST *SwapPtr; + PCI_ADDR Link1ControlRegister; + BOOLEAN IsCaveDevice; + + // No PCI init to run, everything has to be on Bus zero. This makes fewer + // northbridge dependencies. + // + // Assign BUIDs so that config space for all devices is visible. + // + if (State->HtBlock->ManualBuidSwapList != NULL) { + // Manual non-coherent BUID assignment + // Assign BUID's per manual override + // + SwapPtr = &(State->HtBlock->ManualBuidSwapList->SwapList); + Depth = 0; + while (SwapPtr->Swaps[Depth].FromId != 0xFF) { + CurrentPtr.AddressValue = MAKE_SBDFO (0, 0, SwapPtr->Swaps[Depth].FromId, 0, 0); + + do { + LibAmdPciFindNextCap (&CurrentPtr, State->ConfigHandle); + ASSERT (CurrentPtr.AddressValue != ILLEGAL_SBDFO); + LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle); + } while ((Temp & (UINT32)0xE00000FF) != (UINT32)0x00000008); // HyperTransport Slave Capability + + CurrentBUID = SwapPtr->Swaps[Depth].ToId; + // Set the device's BUID + LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBUID, State->ConfigHandle); + Depth++; + } + } else { + // Automatic non-coherent device detection + Depth = 0; + CurrentBUID = 1; + for (;;) { + CurrentPtr.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0); + + LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle); + if (Temp == (UINT32)0xFFFFFFFF) { + // No device found at currentPtr + break; + } + + // HyperTransport Slave Capability + do { + LibAmdPciFindNextCap (&CurrentPtr, State->ConfigHandle); + if (CurrentPtr.AddressValue == ILLEGAL_SBDFO) { + // There is a device at currentPtr, but it isn't an HT device. + return; + } + LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle); + } while ((Temp & (UINT32)0xE00000FF) != (UINT32)0x00000008); // HyperTransport Slave Capability + + // Get the device's Unit ID Count. + LibAmdPciReadBits (CurrentPtr, 25, 21, &UnitIDcnt, State->ConfigHandle); + if ((UnitIDcnt + CurrentBUID) > 24) { + // An error handler for the case where we run out of BUID's on a chain + State->Status = AGESA_ERROR; + ASSERT (FALSE); + return; + } + // While we are still certain we are accessing this device, remember if it is a cave device. + // This is found by reading EOC from the Link 1 Control Register. + Link1ControlRegister = CurrentPtr; + Link1ControlRegister.Address.Register += 8; + LibAmdPciReadBits (Link1ControlRegister, 6, 6, &Temp, State->ConfigHandle); + IsCaveDevice = ((Temp == 0) ? FALSE : TRUE); + + // Set the device's BUID + IDS_HDT_CONSOLE (HT_TRACE, "Device found at depth=%d.\n", Depth); + LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBUID, State->ConfigHandle); + + CurrentPtr.Address.Device = CurrentBUID; + // Get the device's BUID + LibAmdPciReadBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle); + if (Temp != CurrentBUID) { + if ((Depth == 0) && IsCaveDevice) { + // If the chain only consists of a single cave device, that device may have retained zero + // for it's BUID. + CurrentPtr.Address.Device = 0; + LibAmdPciReadBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle); + if (Temp == 0) { + // Per HyperTransport specification, devices not accepting BUID reassignment hardwire BUID to zero. + Depth++; + // Success! + IDS_HDT_CONSOLE (HT_TRACE, "Compliant Cave at BUID=0.\n"); + break; + } else if (Temp == CurrentBUID) { + // and then, there are the other kind of devices .... + // Restore the writable BUID field (which contains the value we just wrote) to zero. + Temp = 0; + LibAmdPciWriteBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle); + Depth++; + // Success! + IDS_HDT_CONSOLE (HT_TRACE, "Cave left at BUID=0.\n"); + break; + } + } + // An error handler for this critical error + State->Status = AGESA_ERROR; + ASSERT (FALSE); + return; + } + + IDS_HDT_CONSOLE (HT_TRACE, "Compliant Device assigned at BUID=%d.\n", CurrentBUID); + Depth++; + CurrentBUID += UnitIDcnt; + } + // Provide information on automatic device results + State->HtBlock->Depth = Depth; + } +} + +/*************************************************************************** + *** HT Reset Initialize *** + ***************************************************************************/ + +/** + * A constructor for the HyperTransport input structure. + * + * Sets inputs to valid, basic level, defaults. + * + * @param[in] StdHeader Config handle + * @param[in,out] AmdHtResetInterface HT Interface structure to initialize. + * + * @retval AGESA_SUCCESS Constructors are not allowed to fail +*/ +AGESA_STATUS +AmdHtResetConstructor ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN AMD_HT_RESET_INTERFACE *AmdHtResetInterface + ) +{ + AmdHtResetInterface->ManualBuidSwapList = HtOptionResetDefaults.ManualBuidSwapList; + return AGESA_SUCCESS; +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * Initialize HT for Reset, Boot Blocks. + * + * This is the top level external interface for Hypertransport Reset Initialization. + * Create our initial internal state and initialize the non-coherent chain to the + * southbridge. This interface must be executed by both normal and recovery boot paths. + * + * @param[in] StdHeader Interface structure + * @param[in] AmdHtResetInterface our interface and inputs + * + * @retval AGESA_SUCCESS Successful init + * @retval AGESA_ERROR Device Error, BUID max exceed error. + * + */ +AGESA_STATUS +AmdHtInitReset ( + IN AMD_CONFIG_PARAMS *StdHeader, + IN AMD_HT_RESET_INTERFACE *AmdHtResetInterface + ) +{ + HTR_STATE_DATA State; + AGESA_STATUS IgnoredStatus; + + State.Status = AGESA_SUCCESS; + if (IsBsp (StdHeader, &IgnoredStatus)) { + State.ConfigHandle = (AMD_CONFIG_PARAMS *)StdHeader; + State.HtBlock = AmdHtResetInterface; + HtrEnableRoutingTables (&State); + + HtrProcessLink (&State); + } + return State.Status; +} |