diff options
Diffstat (limited to 'src/vboot/vboot_handoff.c')
| -rw-r--r-- | src/vboot/vboot_handoff.c | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/src/vboot/vboot_handoff.c b/src/vboot/vboot_handoff.c new file mode 100644 index 0000000000..b0bd04ca16 --- /dev/null +++ b/src/vboot/vboot_handoff.c @@ -0,0 +1,180 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/stages.h> +#include <assert.h> +#include <bootmode.h> +#include <stdint.h> +#include <stddef.h> +#include <string.h> +#include <cbfs.h> +#include <cbmem.h> +#include <console/console.h> +#include <console/vtxprintf.h> +#include <fmap.h> +#include <stdlib.h> +#include <timestamp.h> +#define NEED_VB20_INTERNALS /* TODO: remove me! */ +#include <vb2_api.h> +#include <vboot_struct.h> +#include <vboot/vbnv.h> +#include <vboot/misc.h> + +/** + * Sets vboot_handoff based on the information in vb2_shared_data + */ +static void fill_vboot_handoff(struct vboot_handoff *vboot_handoff, + struct vb2_shared_data *vb2_sd) +{ + VbSharedDataHeader *vb_sd = + (VbSharedDataHeader *)vboot_handoff->shared_data; + uint32_t *oflags = &vboot_handoff->init_params.out_flags; + + vb_sd->flags |= VBSD_BOOT_FIRMWARE_VBOOT2; + + vboot_handoff->selected_firmware = vb2_sd->fw_slot; + + vb_sd->firmware_index = vb2_sd->fw_slot; + + vb_sd->magic = VB_SHARED_DATA_MAGIC; + vb_sd->struct_version = VB_SHARED_DATA_VERSION; + vb_sd->struct_size = sizeof(VbSharedDataHeader); + vb_sd->data_size = VB_SHARED_DATA_MIN_SIZE; + vb_sd->data_used = sizeof(VbSharedDataHeader); + vb_sd->fw_version_tpm = vb2_sd->fw_version_secdata; + + if (get_write_protect_state()) + vb_sd->flags |= VBSD_BOOT_FIRMWARE_WP_ENABLED; + if (get_sw_write_protect_state()) + vb_sd->flags |= VBSD_BOOT_FIRMWARE_SW_WP_ENABLED; + + if (vb2_sd->recovery_reason) { + vb_sd->firmware_index = 0xFF; + if (vb2_sd->flags & VB2_SD_FLAG_MANUAL_RECOVERY) + vb_sd->flags |= VBSD_BOOT_REC_SWITCH_ON; + *oflags |= VB_INIT_OUT_ENABLE_RECOVERY; + *oflags |= VB_INIT_OUT_CLEAR_RAM; + *oflags |= VB_INIT_OUT_ENABLE_DISPLAY; + *oflags |= VB_INIT_OUT_ENABLE_USB_STORAGE; + } + if (vb2_sd->flags & VB2_SD_DEV_MODE_ENABLED) { + *oflags |= VB_INIT_OUT_ENABLE_DEVELOPER; + *oflags |= VB_INIT_OUT_CLEAR_RAM; + *oflags |= VB_INIT_OUT_ENABLE_DISPLAY; + *oflags |= VB_INIT_OUT_ENABLE_USB_STORAGE; + vb_sd->flags |= VBSD_BOOT_DEV_SWITCH_ON; + vb_sd->flags |= VBSD_LF_DEV_SWITCH_ON; + } + /* TODO: Set these in depthcharge */ + if (IS_ENABLED(CONFIG_VIRTUAL_DEV_SWITCH)) + vb_sd->flags |= VBSD_HONOR_VIRT_DEV_SWITCH; + if (IS_ENABLED(CONFIG_EC_SOFTWARE_SYNC)) + vb_sd->flags |= VBSD_EC_SOFTWARE_SYNC; + if (!IS_ENABLED(CONFIG_PHYSICAL_REC_SWITCH)) + vb_sd->flags |= VBSD_BOOT_REC_SWITCH_VIRTUAL; + if (IS_ENABLED(CONFIG_VBOOT_EC_SLOW_UPDATE)) + vb_sd->flags |= VBSD_EC_SLOW_UPDATE; + if (IS_ENABLED(CONFIG_VBOOT_OPROM_MATTERS)) { + vb_sd->flags |= VBSD_OPROM_MATTERS; + /* + * Inform vboot if the display was enabled by dev/rec + * mode or was requested by vboot kernel phase. + */ + if ((*oflags & VB_INIT_OUT_ENABLE_DISPLAY) || + vboot_wants_oprom()) { + vb_sd->flags |= VBSD_OPROM_LOADED; + *oflags |= VB_INIT_OUT_ENABLE_DISPLAY; + } + } + + /* In vboot1, VBSD_FWB_TRIED is + * set only if B is booted as explicitly requested. Therefore, if B is + * booted because A was found bad, the flag should not be set. It's + * better not to touch it if we can only ambiguously control it. */ + /* if (vb2_sd->fw_slot) + vb_sd->flags |= VBSD_FWB_TRIED; */ + + /* copy kernel subkey if it's found */ + if (vb2_sd->workbuf_preamble_size) { + struct vb2_fw_preamble *fp; + uintptr_t dst, src; + printk(BIOS_INFO, "Copying FW preamble\n"); + fp = (struct vb2_fw_preamble *)((uintptr_t)vb2_sd + + vb2_sd->workbuf_preamble_offset); + src = (uintptr_t)&fp->kernel_subkey + + fp->kernel_subkey.key_offset; + dst = (uintptr_t)vb_sd + sizeof(VbSharedDataHeader); + assert(dst + fp->kernel_subkey.key_size <= + (uintptr_t)vboot_handoff + sizeof(*vboot_handoff)); + memcpy((void *)dst, (void *)src, + fp->kernel_subkey.key_size); + vb_sd->data_used += fp->kernel_subkey.key_size; + vb_sd->kernel_subkey.key_offset = + dst - (uintptr_t)&vb_sd->kernel_subkey; + vb_sd->kernel_subkey.key_size = fp->kernel_subkey.key_size; + vb_sd->kernel_subkey.algorithm = fp->kernel_subkey.algorithm; + vb_sd->kernel_subkey.key_version = + fp->kernel_subkey.key_version; + } + + vb_sd->recovery_reason = vb2_sd->recovery_reason; +} + +void vboot_fill_handoff(void) +{ + struct vboot_handoff *vh; + struct vb2_shared_data *sd; + + sd = vb2_get_shared_data(); + sd->workbuf_hash_offset = 0; + sd->workbuf_hash_size = 0; + + printk(BIOS_INFO, "creating vboot_handoff structure\n"); + vh = cbmem_add(CBMEM_ID_VBOOT_HANDOFF, sizeof(*vh)); + if (vh == NULL) + /* we don't need to failover gracefully here because this + * shouldn't happen with the image that has passed QA. */ + die("failed to allocate vboot_handoff structure\n"); + + memset(vh, 0, sizeof(*vh)); + + /* needed until we finish transtion to vboot2 for kernel verification */ + fill_vboot_handoff(vh, sd); + + /* + * The recovery mode switch is cleared (typically backed by EC) here + * to allow multiple queries to get_recovery_mode_switch() and have + * them return consistent results during the verified boot path as well + * as dram initialization. x86 systems ignore the saved dram settings + * in the recovery path in order to start from a clean slate. Therefore + * clear the state here since this function is called when memory + * is known to be up. + */ + clear_recovery_mode_switch(); +} + +/* + * For platforms that employ VBOOT_DYNAMIC_WORK_BUFFER, the vboot + * verification doesn't happen until after cbmem is brought online. + * Therefore, the vboot results would not be initialized so don't + * automatically add results when cbmem comes online. + */ +#if !IS_ENABLED(CONFIG_VBOOT_DYNAMIC_WORK_BUFFER) +static void vb2_fill_handoff_cbmem(int unused) +{ + vboot_fill_handoff(); +} +ROMSTAGE_CBMEM_INIT_HOOK(vb2_fill_handoff_cbmem) +#endif |