summaryrefslogtreecommitdiff
path: root/src/superio
diff options
context:
space:
mode:
Diffstat (limited to 'src/superio')
-rw-r--r--src/superio/winbond/w83627dhg/acpi/superio.asl8
-rw-r--r--src/superio/winbond/w83627dhg/w83627dhg.h24
-rw-r--r--src/superio/winbond/w83627ehg/w83627ehg.h22
-rw-r--r--src/superio/winbond/w83627hf/acpi/superio.asl160
-rw-r--r--src/superio/winbond/w83977tf/acpi/superio.asl18
5 files changed, 116 insertions, 116 deletions
diff --git a/src/superio/winbond/w83627dhg/acpi/superio.asl b/src/superio/winbond/w83627dhg/acpi/superio.asl
index f86f16946e..ea4aebafd2 100644
--- a/src/superio/winbond/w83627dhg/acpi/superio.asl
+++ b/src/superio/winbond/w83627dhg/acpi/superio.asl
@@ -50,7 +50,7 @@ Device(SUPERIO_DEV) {
Field (CREG, ByteAcc, NoLock, Preserve)
{
PNP_ADDR_REG, 8,
- PNP_DATA_REG, 8
+ PNP_DATA_REG, 8
}
IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve)
{
@@ -118,14 +118,14 @@ Device(SUPERIO_DEV) {
Else { Return (0) }
}
- /* PM: Switch to D0 by setting IPD low */
+ /* PM: Switch to D0 by setting IPD low */
Method (_PS0) {
ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
Store (Zero, IPD)
EXIT_CONFIG_MODE ()
}
- /* PM: Switch to D3 by setting IPD high */
+ /* PM: Switch to D3 by setting IPD high */
Method (_PS3) {
ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
Store (One, IPD)
@@ -133,7 +133,7 @@ Device(SUPERIO_DEV) {
}
/* Suspend LED: Write given three-bit value into appropriate register.
- From the datasheet:
+ From the datasheet:
000 - drive pin constantly high
001 - drive 0.5Hz pulses
010 - drive pin constantly low
diff --git a/src/superio/winbond/w83627dhg/w83627dhg.h b/src/superio/winbond/w83627dhg/w83627dhg.h
index 889c4f1bed..8d7c4a9651 100644
--- a/src/superio/winbond/w83627dhg/w83627dhg.h
+++ b/src/superio/winbond/w83627dhg/w83627dhg.h
@@ -6,20 +6,20 @@
#include <device/pnp_type.h>
-#define W83627DHG_FDC 0 /* Floppy */
-#define W83627DHG_PP 1 /* Parallel port */
-#define W83627DHG_SP1 2 /* Com1 */
-#define W83627DHG_SP2 3 /* Com2 */
-#define W83627DHG_KBC 5 /* PS/2 keyboard & mouse */
-#define W83627DHG_SPI 6 /* Serial peripheral interface */
-#define W83627DHG_WDTO_PLED 8 /* WDTO#, PLED */
-#define W83627DHG_ACPI 10 /* ACPI */
-#define W83627DHG_HWM 11 /* Hardware monitor */
-#define W83627DHG_PECI_SST 12 /* PECI, SST */
+#define W83627DHG_FDC 0 /* Floppy */
+#define W83627DHG_PP 1 /* Parallel port */
+#define W83627DHG_SP1 2 /* Com1 */
+#define W83627DHG_SP2 3 /* Com2 */
+#define W83627DHG_KBC 5 /* PS/2 keyboard & mouse */
+#define W83627DHG_SPI 6 /* Serial peripheral interface */
+#define W83627DHG_WDTO_PLED 8 /* WDTO#, PLED */
+#define W83627DHG_ACPI 10 /* ACPI */
+#define W83627DHG_HWM 11 /* Hardware monitor */
+#define W83627DHG_PECI_SST 12 /* PECI, SST */
/* The following are handled using "virtual LDNs" (hence the _V suffix). */
-#define W83627DHG_GPIO6_V 7 /* GPIO6 */
-#define W83627DHG_GPIO2345_V 9 /* GPIO2, GPIO3, GPIO4, GPIO5 */
+#define W83627DHG_GPIO6_V 7 /* GPIO6 */
+#define W83627DHG_GPIO2345_V 9 /* GPIO2, GPIO3, GPIO4, GPIO5 */
/*
* Virtual devices sharing the enables are encoded as follows:
diff --git a/src/superio/winbond/w83627ehg/w83627ehg.h b/src/superio/winbond/w83627ehg/w83627ehg.h
index 1dc7376c04..c22c7dbe98 100644
--- a/src/superio/winbond/w83627ehg/w83627ehg.h
+++ b/src/superio/winbond/w83627ehg/w83627ehg.h
@@ -4,19 +4,19 @@
#ifndef SUPERIO_WINBOND_W83627EHG_H
#define SUPERIO_WINBOND_W83627EHG_H
-#define W83627EHG_FDC 0 /* Floppy */
-#define W83627EHG_PP 1 /* Parallel port */
-#define W83627EHG_SP1 2 /* Com1 */
-#define W83627EHG_SP2 3 /* Com2 */
-#define W83627EHG_KBC 5 /* PS/2 keyboard & mouse */
-#define W83627EHG_WDTO_PLED 8 /* Watchdog timer timeout, power LED */
-#define W83627EHG_ACPI 10 /* ACPI */
-#define W83627EHG_HWM 11 /* Hardware monitor */
+#define W83627EHG_FDC 0 /* Floppy */
+#define W83627EHG_PP 1 /* Parallel port */
+#define W83627EHG_SP1 2 /* Com1 */
+#define W83627EHG_SP2 3 /* Com2 */
+#define W83627EHG_KBC 5 /* PS/2 keyboard & mouse */
+#define W83627EHG_WDTO_PLED 8 /* Watchdog timer timeout, power LED */
+#define W83627EHG_ACPI 10 /* ACPI */
+#define W83627EHG_HWM 11 /* Hardware monitor */
/* The following are handled using "virtual LDNs" (hence the _V suffix). */
-#define W83627EHG_SFI_V 6 /* Serial flash interface (SFI) */
-#define W83627EHG_GPIO_GAME_MIDI_V 7 /* GPIO1, GPIO6, game port, MIDI */
-#define W83627EHG_GPIO_SUSLED_V 9 /* GPIO2, GPIO3, GPIO4, GPIO5, SUSLED */
+#define W83627EHG_SFI_V 6 /* Serial flash interface (SFI) */
+#define W83627EHG_GPIO_GAME_MIDI_V 7 /* GPIO1, GPIO6, game port, MIDI */
+#define W83627EHG_GPIO_SUSLED_V 9 /* GPIO2, GPIO3, GPIO4, GPIO5, SUSLED */
/*
* Virtual devices sharing the enables are encoded as follows:
diff --git a/src/superio/winbond/w83627hf/acpi/superio.asl b/src/superio/winbond/w83627hf/acpi/superio.asl
index 8f1861259a..4d2fd2d5d3 100644
--- a/src/superio/winbond/w83627hf/acpi/superio.asl
+++ b/src/superio/winbond/w83627hf/acpi/superio.asl
@@ -57,83 +57,83 @@ Device(SIO) {
OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02)
Field (CREG, ByteAcc, NoLock, Preserve)
{
- PNP_ADDR_REG, 8,
- PNP_DATA_REG, 8
+ PNP_ADDR_REG, 8,
+ PNP_DATA_REG, 8
}
IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve)
{
Offset (0x02),
- RST, 1, /* Soft reset */
- , 7,
+ RST, 1, /* Soft reset */
+ , 7,
Offset (0x07),
- LDN, 8, /* Logical device selector */
+ LDN, 8, /* Logical device selector */
Offset (0x20),
- DID, 8, /* Device ID */
- DREV, 8, /* Device Revision */
- FDPW, 1, /* FDC Power Down */
- , 2,
- PRPW, 1, /* PRT Power Down */
- UAPW, 1, /* UART A Power Down */
- UBPW, 1, /* UART B Power Down */
- HWPW, 1, /* HWM Power Down */
- , 1,
- IPD, 1, /* Immediate Chip Power Down */
- , 7,
- PNPS, 1, /* PnP Address Select Register Default Value Mode */
- , 1,
- KBCR, 1, /* KBC enabled after system reset (read-only) */
- , 3,
- CLKS, 1, /* Clock select */
- AQ16, 1, /* 16bit Address Qualification */
- FDCT, 1, /* Tristate FDC (?) */
- , 2,
- PRTT, 1, /* Tristate parallel port (?) */
- URAT, 1, /* Tristate UART A (?) */
- URBT, 1, /* Tristate UART B (?) */
- , 2,
- URAI, 1, /* UART A Legacy IRQ Select Disable */
- URBI, 1, /* UART B Legacy IRQ Select Disable */
- PRTI, 1, /* Parallel Port Legacy IRQ/DRQ Select Disable */
- FDCI, 1, /* FDC Legacy IRQ/DRQ Select Disable */
- , 1,
- LCKC, 1, /* Lock Configuration Registers */
+ DID, 8, /* Device ID */
+ DREV, 8, /* Device Revision */
+ FDPW, 1, /* FDC Power Down */
+ , 2,
+ PRPW, 1, /* PRT Power Down */
+ UAPW, 1, /* UART A Power Down */
+ UBPW, 1, /* UART B Power Down */
+ HWPW, 1, /* HWM Power Down */
+ , 1,
+ IPD, 1, /* Immediate Chip Power Down */
+ , 7,
+ PNPS, 1, /* PnP Address Select Register Default Value Mode */
+ , 1,
+ KBCR, 1, /* KBC enabled after system reset (read-only) */
+ , 3,
+ CLKS, 1, /* Clock select */
+ AQ16, 1, /* 16bit Address Qualification */
+ FDCT, 1, /* Tristate FDC (?) */
+ , 2,
+ PRTT, 1, /* Tristate parallel port (?) */
+ URAT, 1, /* Tristate UART A (?) */
+ URBT, 1, /* Tristate UART B (?) */
+ , 2,
+ URAI, 1, /* UART A Legacy IRQ Select Disable */
+ URBI, 1, /* UART B Legacy IRQ Select Disable */
+ PRTI, 1, /* Parallel Port Legacy IRQ/DRQ Select Disable */
+ FDCI, 1, /* FDC Legacy IRQ/DRQ Select Disable */
+ , 1,
+ LCKC, 1, /* Lock Configuration Registers */
Offset (0x29),
- IO3S, 8, /* GPIO3 pin selection register */
+ IO3S, 8, /* GPIO3 pin selection register */
Offset (0x30),
- ACTR, 1, /* Logical device activation */
- ACT1, 1, /* Logical part activation 1 (mostly unused) */
- ACT2, 1, /* Logical part activation 2 (mostly unused) */
- , 5,
+ ACTR, 1, /* Logical device activation */
+ ACT1, 1, /* Logical part activation 1 (mostly unused) */
+ ACT2, 1, /* Logical part activation 2 (mostly unused) */
+ , 5,
Offset (0x60),
- IO1H, 8, /* First I/O port base - high byte */
- IO1L, 8, /* First I/O port base - low byte */
- IO2H, 8, /* Second I/O port base - high byte */
- IO2L, 8, /* Second I/O port base - low byte */
+ IO1H, 8, /* First I/O port base - high byte */
+ IO1L, 8, /* First I/O port base - low byte */
+ IO2H, 8, /* Second I/O port base - high byte */
+ IO2L, 8, /* Second I/O port base - low byte */
Offset (0x70),
- IRQ0, 8, /* First IRQ */
+ IRQ0, 8, /* First IRQ */
Offset (0x72),
- IRQ1, 8, /* First IRQ */
+ IRQ1, 8, /* First IRQ */
Offset (0x74),
- DMA0, 8, /* DMA */
+ DMA0, 8, /* DMA */
Offset (0xE0),
/* CRE0-CRE4: function logical device dependant, seems to be reserved for ACPI settings */
- CRE0, 8,
- CRE1, 8,
- CRE2, 8,
- CRE3, 8,
- CRE4, 8,
+ CRE0, 8,
+ CRE1, 8,
+ CRE2, 8,
+ CRE3, 8,
+ CRE4, 8,
Offset (0xF0),
/* OPT1-OPTA aka CRF0-CRF9: function logical device dependant */
- OPT1, 8,
- OPT2, 8,
- OPT3, 8,
- OPT4, 8,
- OPT5, 8,
- OPT6, 8,
- OPT7, 8,
- OPT8, 8,
- OPT9, 8,
- OPTA, 8
+ OPT1, 8,
+ OPT2, 8,
+ OPT3, 8,
+ OPT4, 8,
+ OPT5, 8,
+ OPT6, 8,
+ OPT7, 8,
+ OPT8, 8,
+ OPT9, 8,
+ OPTA, 8
}
Method (_CRS)
@@ -177,14 +177,14 @@ Device(SIO) {
Else { Return (0) }
}
- /* PM: Switch to D0 by setting IPD low */
+ /* PM: Switch to D0 by setting IPD low */
Method (_PS0) {
ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
Store (Zero, IPD)
EXIT_CONFIG_MODE ()
}
- /* PM: Switch to D3 by setting IPD high */
+ /* PM: Switch to D3 by setting IPD high */
Method (_PS3) {
ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
Store (One, IPD)
@@ -315,23 +315,23 @@ Device(SIO) {
Field (FIO1, ByteAcc, NoLock, Preserve)
{
Offset(0x02),
- SELE, 2,
- RSTL, 1,
- IDMA, 1,
- ACT1, 1,
- ACT2, 1,
- ACT3, 1,
- ACT4, 1,
+ SELE, 2,
+ RSTL, 1,
+ IDMA, 1,
+ ACT1, 1,
+ ACT2, 1,
+ ACT3, 1,
+ ACT4, 1,
Offset(0x04),
- BSY1, 1,
- BSY2, 1,
- BSY3, 1,
- BSY4, 1,
- BUSY, 1,
- NDMA, 1,
- IODI, 1,
- RDY, 1,
- DATA, 8,
+ BSY1, 1,
+ BSY2, 1,
+ BSY3, 1,
+ BSY4, 1,
+ BUSY, 1,
+ NDMA, 1,
+ IODI, 1,
+ RDY, 1,
+ DATA, 8,
}
OperationRegion (FIO2, SystemIO, 0x3F7, 0x01)
Field (FIO2, ByteAcc, NoLock, Preserve)
@@ -567,7 +567,7 @@ Device(SIO) {
If (LEqual(IOAL, 4)) {
Store(0x0, Local2)
- } else {
+ } else {
Store(0x1, Local2)
}
diff --git a/src/superio/winbond/w83977tf/acpi/superio.asl b/src/superio/winbond/w83977tf/acpi/superio.asl
index 0a37ac9908..918d1e1398 100644
--- a/src/superio/winbond/w83977tf/acpi/superio.asl
+++ b/src/superio/winbond/w83977tf/acpi/superio.asl
@@ -67,9 +67,9 @@ IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve)
OPT1, 8
}
-#define PNP_ENTER_MAGIC_1ST 0x87
-#define PNP_ENTER_MAGIC_2ND 0x87
-#define PNP_EXIT_MAGIC_1ST 0xaa
+#define PNP_ENTER_MAGIC_1ST 0x87
+#define PNP_ENTER_MAGIC_2ND 0x87
+#define PNP_EXIT_MAGIC_1ST 0xaa
#include <superio/acpi/pnp_config.asl>
/* PM: indicate IPD (Immediate Power Down) bit state as D0/D3 */
@@ -84,13 +84,13 @@ Method (_PSC) {
#ifdef SUPERIO_SHOW_FDC
Device (FDC0)
{
- Name (_HID, EisaId ("PNP0700")) // _HID: Hardware ID
- Method (_STA, 0, NotSerialized) // _STA: Status
+ Name (_HID, EisaId ("PNP0700")) // _HID: Hardware ID
+ Method (_STA, 0, NotSerialized) // _STA: Status
{
PNP_GENERIC_STA(W83977TF_FDC)
}
- Method (_DIS, 0, NotSerialized) // _DIS: Disable Device
+ Method (_DIS, 0, NotSerialized) // _DIS: Disable Device
{
PNP_GENERIC_DIS(W83977TF_FDC)
}
@@ -300,7 +300,7 @@ Device (ECP)
Return (BUF6)
}
- Name (_PRS, ResourceTemplate () // _PRS: Possible Resource Settings
+ Name (_PRS, ResourceTemplate () // _PRS: Possible Resource Settings
{
StartDependentFn (0x01, 0x01)
{
@@ -326,7 +326,7 @@ Device (ECP)
EndDependentFn ()
})
- Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
+ Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
{
CreateByteField (Arg0, 0x02, IOLO)
CreateByteField (Arg0, 0x03, IOHI)
@@ -366,5 +366,5 @@ Device (ECP)
*/
#define SUPERIO_KBC_LDN W83977TF_KBC
-#define SUPERIO_KBC_PS2M /* Mouse shares same LDN */
+#define SUPERIO_KBC_PS2M /* Mouse shares same LDN */
#include <superio/acpi/pnp_kbc.asl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 04:17:30 +0000