1 files changed, 196 insertions, 0 deletions
diff --git a/src/superio/winbond/w83627dhg/acpi/superio.asl b/src/superio/winbond/w83627dhg/acpi/superio.asl
new file mode 100644
index 0000000000..417d6fe41c
--- /dev/null
+++ b/src/superio/winbond/w83627dhg/acpi/superio.asl
@@ -0,0 +1,196 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Christoph Grenz <christophg+cb@grenz-bonn.de>
+ * Copyright (C) 2013 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * Include this file into a mainboard's DSDT _SB device tree and it will
+ * expose the W83627DHG SuperIO and some of its functionality.
+ *
+ * It allows the change of IO ports, IRQs and DMA settings on logical
+ * devices, disabling and reenabling logical devices and controlling power
+ * saving mode on logical devices or the whole chip.
+ *
+ *   LDN		State
+ * 0x0 FDC		Not implemented
+ * 0x1 PP		Not implemented
+ * 0x2 UARTA		Implemented, partially tested
+ * 0x3 UARTB		UART only, partially tested
+ * 0x5 KBC		Implemented, untested
+ * 0x6 SPI		Not implemented
+ * 0x7 GPIO6		Not implemented
+ * 0x8 WDT0&PLED	Not implemented
+ * 0x9 GPIO2-5		Not implemented
+ * 0xa ACPI		Not implemented
+ * 0xb HWM		Resources, PM only
+ * 0xc PECI&SST		Not implemented
+ *
+ * Controllable through preprocessor defines:
+ * SUPERIO_DEV		Device identifier for this SIO (e.g. SIO0)
+ * SUPERIO_PNP_BASE	I/o address of the first PnP configuration register
+ * W83627DHG_SHOW_UARTA	If defined, UARTA will be exposed.
+ * W83627DHG_SHOW_UARTB	If defined, UARTB will be exposed.
+ * W83627DHG_SHOW_KBC	If defined, the KBC will be exposed.
+ * W83627DHG_SHOW_PS2M	If defined, PS/2 mouse support will be exposed.
+ * W83627DHG_SHOW_HWMON	If defined, the hardware monitor will be exposed.
+ */
+
+#undef SUPERIO_CHIP_NAME
+#define SUPERIO_CHIP_NAME W83627DHG
+#include <superio/acpi/pnp.asl>
+
+Device(SUPERIO_DEV) {
+	Name (_HID, EisaId("PNP0A05"))
+	Name (_STR, Unicode("Winbond W83627DHG Super I/O"))
+	Name (_UID, SUPERIO_UID(SUPERIO_DEV,))
+
+	/* Mutex for accesses to the configuration ports */
+	Mutex(CRMX, 1)
+
+	/* SuperIO configuration ports */
+	OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02)
+	Field (CREG, ByteAcc, NoLock, Preserve)
+	{
+		PNP_ADDR_REG,	8,
+		PNP_DATA_REG,   8
+	}
+	IndexField (ADDR, DATA, ByteAcc, NoLock, Preserve)
+	{
+		Offset (0x07),
+		PNP_LOGICAL_DEVICE,	8, /* Logical device selector */
+
+		Offset (0x22),
+		FDPW,			1, /* FDC Power Down */
+		,			2,
+		PRPW,			1, /* PRT Power Down */
+		UAPW,			1, /* UART A Power Down */
+		UBPW,			1, /* UART B Power Down */
+		HWPW,			1, /* HWM Power Down */
+		Offset (0x23),
+		IPD,			1, /* Immediate Chip Power Down */
+
+		Offset (0x30),
+		PNP_DEVICE_ACTIVE,	1, /* Logical device activation */
+
+		Offset (0x60),
+		PNP_IO0_HIGH_BYTE,	8, /* First I/O port base - high byte */
+		PNP_IO0_LOW_BYTE,	8, /* First I/O port base - low byte */
+		Offset (0x62),
+		PNP_IO1_HIGH_BYTE,	8, /* Second I/O port base - high byte */
+		PNP_IO1_LOW_BYTE,	8, /* Second I/O port base - low byte */
+
+		Offset (0x70),
+		PNP_IRQ0,		8, /* First IRQ */
+		Offset (0x72),
+		PNP_IRQ1,		8, /* Second IRQ */
+
+		Offset (0x74),
+		PNP_DMA0,		8, /* DMA */
+	}
+
+	Method (_CRS)
+	{
+		/* Announce the used i/o ports to the OS */
+		Return (ResourceTemplate () {
+			IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02)
+		})
+	}
+
+	#undef PNP_ENTER_MAGIC_1ST
+	#undef PNP_ENTER_MAGIC_2ND
+	#undef PNP_ENTER_MAGIC_3RD
+	#undef PNP_EXIT_MAGIC_1ST
+	#define PNP_ENTER_MAGIC_1ST	0x87
+	#define PNP_ENTER_MAGIC_2ND	0x87
+	#define PNP_EXIT_MAGIC_1ST	0xaa
+	#include <superio/acpi/pnp_config.asl>
+
+	/* PM: indicate IPD (Immediate Power Down) bit state as D0/D2 */
+	Method (_PSC) {
+		ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
+		  Store (IPD, Local0)
+		EXIT_CONFIG_MODE ()
+		If (Local0) { Return (2) }
+		Else { Return (0) }
+	}
+
+	/* PM: Switch to D0 by setting IPD low  */
+	Method (_PS0) {
+		ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
+		  Store (Zero, IPD)
+		EXIT_CONFIG_MODE ()
+	}
+
+	/* PM: Switch to D2 by setting IPD high  */
+	Method (_PS2) {
+		ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
+		  Store (One, IPD)
+		EXIT_CONFIG_MODE ()
+	}
+
+#ifdef W83627DHG_SHOW_UARTA
+	#undef SUPERIO_UART_LDN
+	#undef SUPERIO_UART_DDN
+	#undef SUPERIO_UART_PM_REG
+	#undef SUPERIO_UART_PM_LDN
+	#define SUPERIO_UART_LDN 2
+	#define SUPERIO_UART_PM_REG UAPW
+	#define SUPERIO_UART_PM_LDN PNP_NO_LDN_CHANGE
+	#include <superio/acpi/pnp_uart.asl>
+#endif
+
+#ifdef W83627DHG_SHOW_UARTB
+	#undef SUPERIO_UART_LDN
+	#undef SUPERIO_UART_DDN
+	#undef SUPERIO_UART_PM_REG
+	#undef SUPERIO_UART_PM_LDN
+	#define SUPERIO_UART_LDN 3
+	#define SUPERIO_UART_PM_REG UBPW
+	#define SUPERIO_UART_PM_LDN PNP_NO_LDN_CHANGE
+	#include <superio/acpi/pnp_uart.asl>
+#endif
+
+#ifdef W83627DHG_SHOW_KBC
+	#undef SUPERIO_KBC_LDN
+	#undef SUPERIO_KBC_PS2M
+	#undef SUPERIO_KBC_PS2LDN
+	#define SUPERIO_KBC_LDN 5
+#ifdef W83627DHG_SHOW_PS2M
+	#define SUPERIO_KBC_PS2M 1
+#endif
+	#include <superio/acpi/pnp_kbc.asl>
+#endif
+
+#ifdef W83627DHG_SHOW_HWMON
+	#undef SUPERIO_PNP_LDN
+	#undef SUPERIO_PNP_DDN
+	#undef SUPERIO_PNP_PM_REG
+	#undef SUPERIO_PNP_PM_LDN
+	#undef SUPERIO_PNP_IO0
+	#undef SUPERIO_PNP_IO1
+	#undef SUPERIO_PNP_IRQ0
+	#undef SUPERIO_PNP_IRQ1
+	#undef SUPERIO_PNP_DMA
+	#define SUPERIO_PNP_LDN		11
+	#define SUPERIO_PNP_PM_REG	HWPW
+	#define SUPERIO_PNP_PM_LDN	PNP_NO_LDN_CHANGE
+	#define SUPERIO_PNP_IO0		0x08, 0x08
+	#define SUPERIO_PNP_IRQ0	1
+	#include <superio/acpi/pnp_generic.asl>
+#endif
+}