diff options
Diffstat (limited to 'src/superio/ite')
| -rw-r--r-- | src/superio/ite/common/Kconfig | 6 | ||||
| -rw-r--r-- | src/superio/ite/common/env_ctrl.c | 29 | ||||
| -rw-r--r-- | src/superio/ite/common/env_ctrl.h | 1 | ||||
| -rw-r--r-- | src/superio/ite/it8613e/Kconfig | 1 | ||||
| -rw-r--r-- | src/superio/ite/it8623e/Kconfig | 1 | ||||
| -rw-r--r-- | src/superio/ite/it8721f/Kconfig | 4 | ||||
| -rw-r--r-- | src/superio/ite/it8728f/Kconfig | 1 | ||||
| -rw-r--r-- | src/superio/ite/it8786e/Kconfig | 1 |
8 files changed, 41 insertions, 3 deletions
diff --git a/src/superio/ite/common/Kconfig b/src/superio/ite/common/Kconfig index 13c8ff53d4..36c1496db0 100644 --- a/src/superio/ite/common/Kconfig +++ b/src/superio/ite/common/Kconfig @@ -42,4 +42,10 @@ config SUPERIO_ITE_ENV_CTRL_7BIT_SLOPE_REG Slope PWM registers have no separate BIT6 and are set directly by 7-bit values instead. +config SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN + bool + help + Temperature can be read to any TMPIN from an external sensor via SST/PECI + (instead of TMPIN3 only). + endif diff --git a/src/superio/ite/common/env_ctrl.c b/src/superio/ite/common/env_ctrl.c index c87f32d3e0..9149c5828c 100644 --- a/src/superio/ite/common/env_ctrl.c +++ b/src/superio/ite/common/env_ctrl.c @@ -61,17 +61,40 @@ static void enable_tmpin(const u16 base, const u8 tmpin, const struct ite_ec_thermal_config *const conf) { u8 reg; + u8 reg_extra; reg = pnp_read_hwm5_index(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE); + reg_extra = pnp_read_hwm5_index(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE); switch (conf->mode) { case THERMAL_PECI: - if (reg & ITE_EC_ADC_TEMP_EXT_REPORTS_TO_MASK) { - printk(BIOS_WARNING, "PECI specified for multiple TMPIN\n"); + /* Some chips can set any TMPIN as the target for PECI readings + while others can only read to TMPIN3. In the latter case a + different register is used for enabling it. */ + if (CONFIG(SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN)) { + /* IT8721F is an exception, it cannot use TMPIN2 for PECI. */ + if (CONFIG(SUPERIO_ITE_IT8721F) && tmpin == 2) { + printk(BIOS_WARNING, + "PECI to TMPIN2 not supported on IT8721F\n"); + return; + } + if (reg & ITE_EC_ADC_TEMP_EXT_REPORTS_TO_MASK) { + printk(BIOS_WARNING, + "PECI specified for multiple TMPIN\n"); + return; + } + reg |= ITE_EC_ADC_TEMP_EXT_REPORTS_TO(tmpin); + } else if (tmpin == 3) { + reg_extra |= ITE_EC_ADC_TEMP_EXTRA_TMPIN3_EXT; + pnp_write_hwm5_index(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE, + reg_extra); + } else { + printk(BIOS_WARNING, "PECI to TMPIN%d not supported on this Super I/O", + tmpin); return; } enable_peci(base); - reg |= ITE_EC_ADC_TEMP_EXT_REPORTS_TO(tmpin); + break; case THERMAL_DIODE: reg |= ITE_EC_ADC_TEMP_DIODE_MODE(tmpin); diff --git a/src/superio/ite/common/env_ctrl.h b/src/superio/ite/common/env_ctrl.h index 145c6c13e9..5a31e7cfbc 100644 --- a/src/superio/ite/common/env_ctrl.h +++ b/src/superio/ite/common/env_ctrl.h @@ -129,6 +129,7 @@ #define ITE_EC_ADC_TEMP_RESISTOR_MODE(x) (1 << ((x)+2)) #define ITE_EC_ADC_TEMP_DIODE_MODE(x) (1 << ((x)-1)) #define ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE 0x55 +#define ITE_EC_ADC_TEMP_EXTRA_TMPIN3_EXT (1 << 7) /* Matches length of ITE_EC_TMPIN_CNT */ static const u8 ITE_EC_TEMP_ADJUST[] = { 0x56, 0x57, 0x59 }; diff --git a/src/superio/ite/it8613e/Kconfig b/src/superio/ite/it8613e/Kconfig index d5ccb65f60..e6f01c4cac 100644 --- a/src/superio/ite/it8613e/Kconfig +++ b/src/superio/ite/it8613e/Kconfig @@ -8,3 +8,4 @@ config SUPERIO_ITE_IT8613E select SUPERIO_ITE_ENV_CTRL_8BIT_PWM select SUPERIO_ITE_ENV_CTRL_5FANS select SUPERIO_ITE_ENV_CTRL_NO_ONOFF + select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN diff --git a/src/superio/ite/it8623e/Kconfig b/src/superio/ite/it8623e/Kconfig index ea57a35e0a..44a79ec723 100644 --- a/src/superio/ite/it8623e/Kconfig +++ b/src/superio/ite/it8623e/Kconfig @@ -7,3 +7,4 @@ config SUPERIO_ITE_IT8623E select SUPERIO_ITE_ENV_CTRL_PWM_FREQ2 select SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG select SUPERIO_ITE_ENV_CTRL_8BIT_PWM + select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN diff --git a/src/superio/ite/it8721f/Kconfig b/src/superio/ite/it8721f/Kconfig index 2c3051bce6..ec22a2d5a0 100644 --- a/src/superio/ite/it8721f/Kconfig +++ b/src/superio/ite/it8721f/Kconfig @@ -3,3 +3,7 @@ config SUPERIO_ITE_IT8721F bool select SUPERIO_ITE_COMMON_PRE_RAM + select SUPERIO_ITE_ENV_CTRL + select SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG + select SUPERIO_ITE_ENV_CTRL_PWM_FREQ2 + select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN diff --git a/src/superio/ite/it8728f/Kconfig b/src/superio/ite/it8728f/Kconfig index be0c20717e..6d02c0b424 100644 --- a/src/superio/ite/it8728f/Kconfig +++ b/src/superio/ite/it8728f/Kconfig @@ -9,3 +9,4 @@ config SUPERIO_ITE_IT8728F select SUPERIO_ITE_ENV_CTRL_8BIT_PWM select SUPERIO_ITE_ENV_CTRL_5FANS select SUPERIO_ITE_ENV_CTRL_7BIT_SLOPE_REG + select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN diff --git a/src/superio/ite/it8786e/Kconfig b/src/superio/ite/it8786e/Kconfig index 332f6020c6..216d6f5bf8 100644 --- a/src/superio/ite/it8786e/Kconfig +++ b/src/superio/ite/it8786e/Kconfig @@ -7,3 +7,4 @@ config SUPERIO_ITE_IT8786E select SUPERIO_ITE_ENV_CTRL_PWM_FREQ2 select SUPERIO_ITE_ENV_CTRL_8BIT_PWM select SUPERIO_ITE_ENV_CTRL_7BIT_SLOPE_REG + select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN |