diff options
Diffstat (limited to 'src/superio/ite')
| -rw-r--r-- | src/superio/ite/it8772f/it8772f.h | 1 | ||||
| -rw-r--r-- | src/superio/ite/it8772f/superio.c | 36 |
2 files changed, 37 insertions, 0 deletions
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h index 43e7d4cf43..d1d898aea6 100644 --- a/src/superio/ite/it8772f/it8772f.h +++ b/src/superio/ite/it8772f/it8772f.h @@ -70,6 +70,7 @@ #define IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS (0 << 7) #define IT8772F_FAN_CTL_AUTO_SMOOTHING_EN (1 << 7) #define IT8772F_EXTEMP_STATUS 0x88 +#define IT8772F_EXTEMP_STATUS_HOST_BUSY (1 << 0) #define IT8772F_EXTEMP_ADDRESS 0x89 #define IT8772F_EXTEMP_WRITE_LENGTH 0x8a #define IT8772F_EXTEMP_READ_LENGTH 0x8b diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c index ca103518a4..4d83280241 100644 --- a/src/superio/ite/it8772f/superio.c +++ b/src/superio/ite/it8772f/superio.c @@ -22,6 +22,7 @@ #include <device/pnp.h> #include <pc80/keyboard.h> #include <arch/io.h> +#include <delay.h> #include <stdlib.h> #include <superio/conf_mode.h> @@ -40,6 +41,34 @@ static inline void it8772f_envc_write(struct resource *res, u8 addr, u8 value) outb(value, res->base + 6); } +static void it8772f_extemp_force_idle_status(struct resource *res) +{ + u8 reg; + int retries = 10; + + /* Wait up to 10ms for non-busy state. */ + while (retries > 0) { + reg = it8772f_envc_read(res, IT8772F_EXTEMP_STATUS); + + if ((reg & IT8772F_EXTEMP_STATUS_HOST_BUSY) == 0x0) + break; + + retries--; + + mdelay(1); + } + + if (retries == 0 && (reg & IT8772F_EXTEMP_STATUS_HOST_BUSY) == 0x1) { + /* + * SIO is busy due to unfinished peci transaction. + * Re-configure Register 0x8E to terminate processes. + */ + it8772f_envc_write(res, IT8772F_EXTEMP_CONTROL, + IT8772F_EXTEMP_CONTROL_AUTO_4HZ | + IT8772F_EXTEMP_CONTROL_AUTO_START); + } +} + /* * Setup External Temperature to read via PECI into TMPINx register */ @@ -142,6 +171,13 @@ static void it8772f_init(struct device *dev) it8772f_enable_fan(res, 2); if (conf->fan3_enable) it8772f_enable_fan(res, 3); + + /* + * System may get wrong temperature data when SIO is in + * busy state. Therefore, check the status and terminate + * processes if needed. + */ + it8772f_extemp_force_idle_status(res); break; case IT8772F_GPIO: /* Set GPIO output levels */ |