diff options
Diffstat (limited to 'src/superio/ite/common/env_ctrl.c')
| -rw-r--r-- | src/superio/ite/common/env_ctrl.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/src/superio/ite/common/env_ctrl.c b/src/superio/ite/common/env_ctrl.c index f69273e984..57896e0c01 100644 --- a/src/superio/ite/common/env_ctrl.c +++ b/src/superio/ite/common/env_ctrl.c @@ -156,7 +156,7 @@ static void fan_smartconfig(const u16 base, const u8 fan, /* 50% duty cycle by default */ const u8 duty = conf->pwm_start ? conf->pwm_start : 50; - if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_8BIT_PWM)) + if (CONFIG(SUPERIO_ITE_ENV_CTRL_8BIT_PWM)) pwm_start = ITE_EC_FAN_CTL_PWM_DUTY(duty); else pwm_ctrl |= ITE_EC_FAN_CTL_PWM_DUTY(duty); @@ -193,12 +193,12 @@ static void enable_fan(const u16 base, const u8 fan, u8 reg; if (conf->mode == FAN_IGNORE || - (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_NO_ONOFF) && + (CONFIG(SUPERIO_ITE_ENV_CTRL_NO_ONOFF) && conf->mode <= FAN_MODE_OFF)) return; /* FAN_CTL2 might have its own frequency setting */ - if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_PWM_FREQ2) && fan == 2) { + if (CONFIG(SUPERIO_ITE_ENV_CTRL_PWM_FREQ2) && fan == 2) { reg = ite_ec_read(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE); reg &= ~ITE_EC_FAN_PWM_CLOCK_MASK; reg |= ITE_EC_FAN_PWM_DEFAULT_CLOCK; @@ -216,14 +216,14 @@ static void enable_fan(const u16 base, const u8 fan, ite_ec_write(base, ITE_EC_FAN_CTL_MODE, reg); } - if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG) + if (CONFIG(SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG) && conf->mode >= FAN_MODE_ON) { reg = ite_ec_read(base, ITE_EC_FAN_TAC_COUNTER_ENABLE); reg |= ITE_EC_FAN_TAC_16BIT_ENABLE(fan); ite_ec_write(base, ITE_EC_FAN_TAC_COUNTER_ENABLE, reg); } - if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS) && fan > 3) { + if (CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS) && fan > 3) { reg = ite_ec_read(base, ITE_EC_FAN_SEC_CTL); if (conf->mode >= FAN_MODE_ON) reg |= ITE_EC_FAN_SEC_CTL_TAC_EN(fan); @@ -238,7 +238,7 @@ static void enable_fan(const u16 base, const u8 fan, reg &= ~ITE_EC_FAN_MAIN_CTL_TAC_EN(fan); /* Some ITEs have SmartGuardian always enabled */ - if (!IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_NO_ONOFF)) { + if (!CONFIG(SUPERIO_ITE_ENV_CTRL_NO_ONOFF)) { if (conf->mode >= FAN_SMART_SOFTWARE) reg |= ITE_EC_FAN_MAIN_CTL_SMART(fan); else |