diff options
Diffstat (limited to 'src/superio/fintek/f81866d/f81866d_uart.c')
| -rw-r--r-- | src/superio/fintek/f81866d/f81866d_uart.c | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/src/superio/fintek/f81866d/f81866d_uart.c b/src/superio/fintek/f81866d/f81866d_uart.c new file mode 100644 index 0000000000..4a198d0aaf --- /dev/null +++ b/src/superio/fintek/f81866d/f81866d_uart.c @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects + * (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pnp.h> +#include "fintek_internal.h" +#include "f81866d.h" + +#define LDN_REG 0x07 +#define PORT_SELECT_REGISTER 0x27 +#define MULTI_FUNC_SEL3_REG 0x29 +#define IRQ_SHARE_REGISTER 0xF0 +#define FIFO_SEL_MODE 0xF6 + +/* + * f81866d_uart_init enables all necessary registers for UART 3/4 + * Fintek needs to know if pins are used as GPIO or UART pins + * Share interrupt usage needs to be enabled + */ +void f81866d_uart_init(struct device *dev) +{ + struct resource *res = find_resource(dev, PNP_IDX_IO0); + u8 tmp; + + if (!res) { + printk(BIOS_WARNING, "%s: No UART resource found.\n", __func__); + return; + } + + pnp_enter_conf_mode(dev); + + // Set Port Select Register (Bit 0) = 0 + // before accessing Multi Function Select 3 Register + tmp = pnp_read_config(dev, PORT_SELECT_REGISTER); + pnp_write_config(dev, PORT_SELECT_REGISTER, tmp & 0xFE); + + // Set UART 3 function (Bit 4/5), otherwise pin 36-43 are GPIO + if (dev->path.pnp.device == F81866D_SP3) { + tmp = pnp_read_config(dev, MULTI_FUNC_SEL3_REG); + pnp_write_config(dev, MULTI_FUNC_SEL3_REG, tmp | 0x30); + } + + // Set UART 4 function (Bit 6/7), otherwise pin 44-51 are GPIO + if (dev->path.pnp.device == F81866D_SP4) { + tmp = pnp_read_config(dev, MULTI_FUNC_SEL3_REG); + pnp_write_config(dev, MULTI_FUNC_SEL3_REG, tmp | 0xC0); + } + + // Select UART X in LDN register + pnp_write_config(dev, LDN_REG, dev->path.pnp.device & 0xff); + // Set IRQ trigger mode from active low to high (Bit 3) + tmp = pnp_read_config(dev, FIFO_SEL_MODE); + pnp_write_config(dev, FIFO_SEL_MODE, tmp | 0x8); + // Enable share interrupt (Bit 0) + pnp_write_config(dev, IRQ_SHARE_REGISTER, 0x01); + + pnp_exit_conf_mode(dev); +} |