diff options
Diffstat (limited to 'src/southbridge')
| -rw-r--r-- | src/southbridge/via/k8t890/Kconfig | 33 | ||||
| -rw-r--r-- | src/southbridge/via/k8t890/k8t890_dram.c | 103 |
2 files changed, 69 insertions, 67 deletions
diff --git a/src/southbridge/via/k8t890/Kconfig b/src/southbridge/via/k8t890/Kconfig index 34678ef4a5..c921e67e8e 100644 --- a/src/southbridge/via/k8t890/Kconfig +++ b/src/southbridge/via/k8t890/Kconfig @@ -1,3 +1,36 @@ config SOUTHBRIDGE_VIA_K8T890 bool +config SOUTHBRIDGE_VIA_K8T890_VGA_EN + bool "Enable onboard K8M890 graphics" + default y + depends on SOUTHBRIDGE_VIA_K8T890 + select VGA + select GFXUMA + +choice + prompt "Framebuffer size" + default K8M890_VIDEO_MB_32MB + depends on SOUTHBRIDGE_VIA_K8T890_VGA_EN + +config K8M890_VIDEO_MB_32MB + bool "32MB" +config K8M890_VIDEO_MB_64MB + bool "64MB" +config K8M890_VIDEO_MB_128MB + bool "128MB" +config K8M890_VIDEO_MB_256MB + bool "256MB" +config K8M890_VIDEO_MB_CMOS + bool "Use CMOS option" + +endchoice + +config VIDEO_MB + int + default 32 if K8M890_VIDEO_MB_32MB + default 64 if K8M890_VIDEO_MB_64MB + default 128 if K8M890_VIDEO_MB_128MB + default 256 if K8M890_VIDEO_MB_256MB + default -1 if K8M890_VIDEO_MB_CMOS + depends on SOUTHBRIDGE_VIA_K8T890_VGA_EN diff --git a/src/southbridge/via/k8t890/k8t890_dram.c b/src/southbridge/via/k8t890/k8t890_dram.c index ac67d4a5b6..4f99fec155 100644 --- a/src/southbridge/via/k8t890/k8t890_dram.c +++ b/src/southbridge/via/k8t890/k8t890_dram.c @@ -67,47 +67,44 @@ static void dram_enable(struct device *dev) } +#if CONFIG_GFXUMA +extern uint64_t uma_memory_base, uma_memory_size; +#endif + static void dram_enable_k8m890(struct device *dev) { - dram_enable(dev); +#if CONFIG_GFXUMA + msr_t msr; + int ret; + unsigned int fbbits; + + /* use CMOS */ + if (CONFIG_VIDEO_MB == -1) { + ret = get_option(&fbbits, "videoram_size"); + if (ret) { + printk(BIOS_WARNING, "Failed to get videoram size (error %d), using default.\n", ret); + fbbits = 5; + } + + if ((fbbits < 1) || (fbbits > 7)) { + printk(BIOS_WARNING, "Invalid videoram size (%d), using default.\n", + 4 << fbbits); + fbbits = 5; + } + uma_memory_size = 4 << (fbbits + 20); + } else { + uma_memory_size = (CONFIG_VIDEO_MB << 20); + } + msr = rdmsr(TOP_MEM); + uma_memory_base = msr.lo - uma_memory_size; + printk(BIOS_INFO, "K8M890: UMA base is %llx size is %d (MB)\n", uma_memory_base, uma_memory_size / 1024 / 1024); /* enable VGA, so the bridges gets VGA_EN and resources are set */ pci_write_config8(dev, 0xa1, 0x80); -} - -static struct resource *resmax; - -static void get_memres(void *gp, struct device *dev, struct resource *res) -{ - unsigned int *fbsize = (unsigned int *) gp; - uint64_t proposed_base = res->base + res->size - *fbsize; - - printk(BIOS_DEBUG, "get_memres: res->base=%llx res->size=%llx %d %d %d\n", - res->base, res->size, (res->size > *fbsize), - (!(proposed_base & (*fbsize - 1))), - (proposed_base < ((uint64_t) 0xffffffff))); - - /* if we fit and also align OK, and must be below 4GB */ - if ((res->size > *fbsize) && (!(proposed_base & (*fbsize - 1))) && - (proposed_base < ((uint64_t) 0xffffffff) )) { - resmax = res; - } -#if CONFIG_WRITE_HIGH_TABLES==1 -/* in arch/i386/boot/tables.c */ -extern uint64_t high_tables_base, high_tables_size; - - if ((high_tables_base) && ((high_tables_base > proposed_base) && - (high_tables_base < (res->base + res->size)))) { - high_tables_base = proposed_base - high_tables_size; - printk(BIOS_DEBUG, "Moving the high_tables_base pointer to " - "new base %llx\n", high_tables_base); - } #endif + dram_enable(dev); } -/* - * - */ int k8m890_host_fb_size_get(void) { @@ -125,57 +122,29 @@ k8m890_host_fb_size_get(void) static void dram_init_fb(struct device *dev) { +#if CONFIG_GFXUMA /* Important bits: * Enable the internal GFX bit 7 of reg 0xa1 plus in same reg: * bits 6:4 X fbuffer size will be 2^(X+2) or 100 = 64MB, 101 = 128MB * bits 3:0 BASE [31:28] * reg 0xa0 bits 7:1 BASE [27:21] bit0 enable CPU access */ - u8 tmp; - uint64_t proposed_base; unsigned int fbbits = 0; - unsigned int fbsize; + u8 tmp; int ret; - - ret = get_option(&fbbits, "videoram_size"); - if (ret) { - printk(BIOS_WARNING, "Failed to get videoram size (error %d), using default.\n", ret); - fbbits = 5; - } - - if ((fbbits < 1) || (fbbits > 7)) { - printk(BIOS_WARNING, "Invalid videoram size (%d), using default.\n", - 4 << fbbits); - fbbits = 5; - } - - fbsize = 4 << (fbbits + 20); - - resmax = NULL; - search_global_resources( - IORESOURCE_MEM | IORESOURCE_CACHEABLE, IORESOURCE_MEM | IORESOURCE_CACHEABLE, - get_memres, (void *) &fbsize); - - /* no space for FB */ - if (!resmax) { - printk(BIOS_ERR, "VIA FB: no space for framebuffer in RAM\n"); - return; - } - - proposed_base = resmax->base + resmax->size - fbsize; - resmax->size -= fbsize; - - printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", 4 << fbbits); + fbbits = ((log2(uma_memory_size >> 20) - 2) << 4); + printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", (unsigned int) (uma_memory_size >> 20)); /* Step 1: enable UMA but no FB */ pci_write_config8(dev, 0xa1, 0x80); /* Step 2: enough is just the FB size, the CPU accessible address is not needed */ - tmp = (fbbits << 4) | 0x80; + tmp = fbbits | 0x80; pci_write_config8(dev, 0xa1, tmp); /* TODO K8 needs some UMA fine tuning too maybe call some generic routine here? */ +#endif } static const struct device_operations dram_ops_t = { |