summaryrefslogtreecommitdiff
path: root/src/southbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge')
-rw-r--r--src/southbridge/amd/rs690/chip.h2
-rw-r--r--src/southbridge/amd/rs690/cmn.c2
-rw-r--r--src/southbridge/amd/rs690/gfx.c6
-rw-r--r--src/southbridge/amd/rs690/pcie.c10
-rw-r--r--src/southbridge/amd/rs690/rs690.h2
-rw-r--r--src/southbridge/amd/rs780/chip.h2
-rw-r--r--src/southbridge/amd/rs780/early_setup.c6
-rw-r--r--src/southbridge/amd/rs780/gfx.c16
-rw-r--r--src/southbridge/amd/rs780/pcie.c8
-rw-r--r--src/southbridge/amd/rs780/rs780.h6
10 files changed, 30 insertions, 30 deletions
diff --git a/src/southbridge/amd/rs690/chip.h b/src/southbridge/amd/rs690/chip.h
index ec8aa05cb6..689a5dd8a2 100644
--- a/src/southbridge/amd/rs690/chip.h
+++ b/src/southbridge/amd/rs690/chip.h
@@ -30,7 +30,7 @@ struct southbridge_amd_rs690_config
u8 gfx_lane_reversal; /* Single/Dual slot lan reversal */
u8 gfx_tmds; /* whether support TMDS? */
u8 gfx_compliance; /* whether support compliance? */
- u8 gfx_reconfiguration; /* Dynamic Lind Width Control */
+ u8 gfx_reconfiguration; /* Dynamic Link Width Control */
u8 gfx_link_width; /* Desired width of lane 2 */
};
diff --git a/src/southbridge/amd/rs690/cmn.c b/src/southbridge/amd/rs690/cmn.c
index 86a6976606..eba1c75b50 100644
--- a/src/southbridge/amd/rs690/cmn.c
+++ b/src/southbridge/amd/rs690/cmn.c
@@ -273,7 +273,7 @@ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port)
res = 0;
count = 0;
break;
- case 0x07: /* device is in compliance state (training sequence is doen). Move to train the next device */
+ case 0x07: /* device is in compliance state (training sequence is done). Move to train the next device */
res = 1; /* TODO: CIM sets it to 0 */
count = 0;
break;
diff --git a/src/southbridge/amd/rs690/gfx.c b/src/southbridge/amd/rs690/gfx.c
index 42e6c35020..4de5aca608 100644
--- a/src/southbridge/amd/rs690/gfx.c
+++ b/src/southbridge/amd/rs690/gfx.c
@@ -19,7 +19,7 @@
/*
* for rs690 internal graphics device
- * device id of internal grphics:
+ * device id of internal graphics:
* RS690M/T: 0x791f
* RS690: 0x791e
*/
@@ -509,7 +509,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port)
printk(BIOS_INFO, "rs690_gfx_init step6.\n");
/* step 7 compliance state, (only need if CMOS option is enabled) */
- /* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */
+ /* the compliance state is just for test. refer to 4.2.5.2 of PCIe specification */
if (cfg->gfx_compliance) {
/* force compliance */
set_nbmisc_enable_bits(nb_dev, 0x32, 1 << 6, 1 << 6);
@@ -558,7 +558,7 @@ void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port)
pci_write_config16(dev, 0x5a, reg16);
printk(BIOS_INFO, "rs690_gfx_init step8.9.\n");
- /* step 8.10 Setting this register to 0x1 will hide the Advanced Error Rporting Capabilities in the PCIE Brider.
+ /* step 8.10 Setting this register to 0x1 will hide the Advanced Error Reporting Capabilities in the PCIE Bridge.
* This will workaround several failures reported by the PCI Compliance test under Vista DTM. */
set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 31, 0 << 31);
printk(BIOS_INFO, "rs690_gfx_init step8.10.\n");
diff --git a/src/southbridge/amd/rs690/pcie.c b/src/southbridge/amd/rs690/pcie.c
index 0bd4da5735..d2817255e0 100644
--- a/src/southbridge/amd/rs690/pcie.c
+++ b/src/southbridge/amd/rs690/pcie.c
@@ -142,7 +142,7 @@ static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev)
reg |= cfg->gpp_configuration << 4;
nbmisc_write_index(nb_dev, 0x67, reg);
- /* read bit14 and write back its inverst value */
+ /* read bit14 and write back its inverted value */
reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
reg ^= RECONFIG_GPPSB_GPPSB;
nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
@@ -256,7 +256,7 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
case 7:
/* Blocks DMA traffic during C3 state */
set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
- /* Enabels TLP flushing */
+ /* Enables TLP flushing */
set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
/* check port enable */
@@ -301,10 +301,10 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
}
/* step 6b: L0s for the southbridge link */
- /* To enalbe L0s in the southbridage*/
+ /* To enable L0s in the southbridge*/
/* step 6c: L0s for the GPP link(s) */
- /* To eable L0s in the RS690 for the GPP port(s) */
+ /* To enable L0s in the RS690 for the GPP port(s) */
set_pcie_enable_bits(nb_dev, 0xf9, 3 << 13, 2 << 13);
set_pcie_enable_bits(dev, 0xa0, 0xf << 8, 0x9 << 8);
reg16 = pci_read_config16(dev, 0x68);
@@ -312,7 +312,7 @@ void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
pci_write_config16(dev, 0x68, reg16);
/* step 6d: ASPM L1 for the southbridge link */
- /* To enalbe L1s in the southbridage*/
+ /* To enable L1s in the southbridge*/
/* step 6e: ASPM L1 for GPP link(s) */;
set_pcie_enable_bits(nb_dev, 0xf9, 3 << 13, 2 << 13);
diff --git a/src/southbridge/amd/rs690/rs690.h b/src/southbridge/amd/rs690/rs690.h
index 9f143d4b22..5bad41e4e1 100644
--- a/src/southbridge/amd/rs690/rs690.h
+++ b/src/southbridge/amd/rs690/rs690.h
@@ -104,7 +104,7 @@ typedef enum _NB_REVISION_ {
* ------------------------------------------------- */
extern PCIE_CFG AtiPcieCfg;
-/* ----------------- export funtions ----------------- */
+/* ----------------- export functions ----------------- */
u32 nbmisc_read_index(device_t nb_dev, u32 index);
void nbmisc_write_index(device_t nb_dev, u32 index, u32 data);
u32 nbpcie_p_read_index(device_t dev, u32 index);
diff --git a/src/southbridge/amd/rs780/chip.h b/src/southbridge/amd/rs780/chip.h
index 5c64a1a8f5..7a893c783f 100644
--- a/src/southbridge/amd/rs780/chip.h
+++ b/src/southbridge/amd/rs780/chip.h
@@ -31,7 +31,7 @@ struct southbridge_amd_rs780_config
u8 gfx_lane_reversal; /* Single/Dual slot lan reversal */
u8 gfx_tmds; /* whether support TMDS? */
u8 gfx_compliance; /* whether support compliance? */
- u8 gfx_reconfiguration; /* Dynamic Lind Width Control */
+ u8 gfx_reconfiguration; /* Dynamic Link Width Control */
u8 gfx_link_width; /* Desired width of lane 2 */
u8 gfx_pcie_config; /* GFX PCIE Modes */
u8 gfx_ddi_config; /* GFX DDI Modes */
diff --git a/src/southbridge/amd/rs780/early_setup.c b/src/southbridge/amd/rs780/early_setup.c
index a36112bebb..d35ecddf14 100644
--- a/src/southbridge/amd/rs780/early_setup.c
+++ b/src/southbridge/amd/rs780/early_setup.c
@@ -256,17 +256,17 @@ static void rs780_htinit(void)
set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1);
/* Enables error-retry mode */
set_nbcfg_enable_bits(rs780_f0, 0x44, 0x1, 0x1);
- /* Enables scrambling and Disalbes command throttling */
+ /* Enables scrambling and Disables command throttling */
set_nbcfg_enable_bits(rs780_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14));
/* Enables transmitter de-emphasis */
set_nbcfg_enable_bits(rs780_f0, 0xa4, 1 << 31, 1 << 31);
- /* Enabels transmitter de-emphasis level */
+ /* Enables transmitter de-emphasis level */
/* Sets training 0 time */
set_nbcfg_enable_bits(rs780_f0, 0xa0, 0x3F, 0x14);
/* Enables strict TM4 detection */
set_htiu_enable_bits(rs780_f0, 0x15, 0x1 << 22, 0x1 << 22);
- /* Enables proprer DLL reset sequence */
+ /* Enables proper DLL reset sequence */
set_htiu_enable_bits(rs780_f0, 0x16, 0x1 << 10, 0x1 << 10);
/* HyperTransport 3 Processor register settings to be done in northbridge */
diff --git a/src/southbridge/amd/rs780/gfx.c b/src/southbridge/amd/rs780/gfx.c
index 2825925534..30a5c69a10 100644
--- a/src/southbridge/amd/rs780/gfx.c
+++ b/src/southbridge/amd/rs780/gfx.c
@@ -19,7 +19,7 @@
/*
* for rs780 internal graphics device
- * device id of internal grphics:
+ * device id of internal graphics:
* RS780: 0x9610
* RS780C: 0x9611
* RS780M: 0x9612
@@ -355,7 +355,7 @@ static void internal_gfx_pci_dev_init(struct device *dev)
static const u16 memclk_lookup_fam0F [] = {100, 0, 133, 0, 0, 166, 0, 200};
static const u16 memclk_lookup_fam10 [] = {200, 266, 333, 400, 533, 667, 800, 800};
- /* We definetely will use this in future. Just leave it here. */
+ /* We definitely will use this in future. Just leave it here. */
/*struct southbridge_amd_rs780_config *cfg =
(struct southbridge_amd_rs780_config *)dev->chip_info;*/
@@ -961,7 +961,7 @@ static void rs780_internal_gfx_enable(device_t dev)
set_nbmc_enable_bits(nb_dev, 0xa1, 0x0ff, 0x044);
set_nbmc_enable_bits(nb_dev, 0xb4, 0xf00, 0xb00);
#if 0
- /* Controller Termation. */
+ /* Controller Termination. */
set_nbmc_enable_bits(nb_dev, 0xb1, 0x77770000, 0x77770000);
#endif
@@ -1124,8 +1124,8 @@ static void dual_port_configuration(device_t nb_dev, device_t dev)
if (!result) {
/* Powers down all lanes for port A */
/* nbpcie_ind_write_index(nb_dev, 0x65, 0x0f0f); */
- /* Note: I have to disable the slot where there isnt a device,
- * otherwise the system will hang. I dont know why. */
+ /* Note: I have to disable the slot where there isn't a device,
+ * otherwise the system will hang. I don't know why. */
set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, 1 << dev_ind);
} else { /* step 16.b Link Training was successful */
@@ -1423,7 +1423,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
/* done by enable_pci_bar3() before */
/* step 7 compliance state, (only need if CMOS option is enabled) */
- /* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */
+ /* the compliance state is just for test. refer to 4.2.5.2 of PCIe specification */
if (cfg->gfx_compliance) {
/* force compliance */
set_nbmisc_enable_bits(nb_dev, 0x32, 1 << 6, 1 << 6);
@@ -1452,7 +1452,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
/* 5.9.12.6. Disables RC ordering logic */
set_pcie_enable_bits(nb_dev, 0x20, 1 << 9, 1 << 9);
- /* Enabels TLP flushing. */
+ /* Enables TLP flushing. */
/* Note: It is got from RS690. The system will hang without this action. */
set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
@@ -1530,7 +1530,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port)
1 << 0 | 0x1F << 1 | 0x1F << 6,
1 << 0 | 0x04 << 1 | 0x04 << 6);
- /* Single-port/Dual-port configureation. */
+ /* Single-port/Dual-port configuration. */
switch (cfg->gfx_dual_slot) {
case 0:
/* step 1, lane reversal (only need if build config option is enabled) */
diff --git a/src/southbridge/amd/rs780/pcie.c b/src/southbridge/amd/rs780/pcie.c
index fcf3d9427a..060838ca9c 100644
--- a/src/southbridge/amd/rs780/pcie.c
+++ b/src/southbridge/amd/rs780/pcie.c
@@ -149,12 +149,12 @@ static void switching_gppsb_configurations(device_t nb_dev, device_t sb_dev)
reg &= ~(1 << 31);
nbmisc_write_index(nb_dev, 0x66, reg);
- /* 5.5.7.5-6. read bit14 and write back its inverst value */
+ /* 5.5.7.5-6. read bit14 and write back its inverted value */
reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
reg ^= RECONFIG_GPPSB_GPPSB;
nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
#else
- /* 5.5.7.5-6. read bit14 and write back its inverst value */
+ /* 5.5.7.5-6. read bit14 and write back its inverted value */
reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
reg ^= RECONFIG_GPPSB_GPPSB;
nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
@@ -300,7 +300,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
set_nbmisc_enable_bits(nb_dev, 0x24, 3 << 16, 2 << 16);
/* 5.10.8.22. Disable GEN2 */
- /* TODO: should be 2 seperated cases. */
+ /* TODO: should be 2 separated cases. */
set_nbmisc_enable_bits(nb_dev, 0x39, 1 << 31, 0 << 31);
set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 5, 0 << 5);
set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 31, 0 << 31);
@@ -351,7 +351,7 @@ void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
case 10:
/* 5.10.8.5. Blocks DMA traffic during C3 state */
set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
- /* Enabels TLP flushing */
+ /* Enables TLP flushing */
set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
/* check port enable */
diff --git a/src/southbridge/amd/rs780/rs780.h b/src/southbridge/amd/rs780/rs780.h
index c44a81347b..f84604df58 100644
--- a/src/southbridge/amd/rs780/rs780.h
+++ b/src/southbridge/amd/rs780/rs780.h
@@ -78,7 +78,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
ULONG ulSystemConfig;
//[0]=1: PowerExpress mode
// =0 Non-PowerExpress mode;
-//[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will disable other power state in VBIOS table.
+//[1]=1: system boots up at AMD overdriven state or user customized mode. In this case, driver will disable other power state in VBIOS table.
// =0: system boots up at driver control state. Power state depends on VBIOS PP table.
//[2]=1: PWM method is used on NB voltage control.
// =0: GPIO method is used.
@@ -90,7 +90,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
// =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
//[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and VBIOS PP table voltage drop/throttling request will be ignored.
// =0: Voltage settings is determined by VBIOS PP table.
-//[7]=1: Enable CLMC Hybird Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
+//[7]=1: Enable CLMC Hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
// =0: Enable regular CLMC mode, CDLD and CILR will be enabled.
//[8]=1: CDLF is supported and enabled by fuse //CHP 914
// =0: CDLF is not supported and not enabled by fuses
@@ -174,7 +174,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
* ------------------------------------------------- */
extern PCIE_CFG AtiPcieCfg;
-/* ----------------- export funtions ----------------- */
+/* ----------------- export functions ----------------- */
u32 nbmisc_read_index(device_t nb_dev, u32 index);
void nbmisc_write_index(device_t nb_dev, u32 index, u32 data);
u32 nbpcie_p_read_index(device_t dev, u32 index);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 00:19:35 +0000