aboutsummaryrefslogtreecommitdiff
path: root/src/southbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge')
-rw-r--r--src/southbridge/intel/lynxpoint/lpc.c48
-rw-r--r--src/southbridge/intel/lynxpoint/pch.h1
2 files changed, 18 insertions, 31 deletions
diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c
index 40e04683ae..be685492e4 100644
--- a/src/southbridge/intel/lynxpoint/lpc.c
+++ b/src/southbridge/intel/lynxpoint/lpc.c
@@ -43,43 +43,29 @@
typedef struct southbridge_intel_lynxpoint_config config_t;
-static void pch_enable_apic(struct device *dev)
+/**
+ * Set miscellanous static southbridge features.
+ *
+ * @param dev PCI device with I/O APIC control registers
+ */
+static void pch_enable_ioapic(struct device *dev)
{
- int i;
u32 reg32;
- volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR);
- volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
- /* Enable ACPI I/O and power management.
- * Set SCI IRQ to IRQ9
- */
- pci_write_config8(dev, ACPI_CNTL, 0x80);
+ /* Enable ACPI I/O range decode */
+ pci_write_config8(dev, ACPI_CNTL, ACPI_EN);
- *ioapic_index = 0;
- *ioapic_data = (2 << 24);
+ set_ioapic_id(IO_APIC_ADDR, 0x02);
/* affirm full set of redirection table entries ("write once") */
- *ioapic_index = 1;
- reg32 = *ioapic_data;
- *ioapic_index = 1;
- *ioapic_data = reg32;
-
- *ioapic_index = 0;
- reg32 = *ioapic_data;
- printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
- if (reg32 != (1 << 25))
- die("APIC Error\n");
-
- printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
- for (i=0; i<3; i++) {
- *ioapic_index = i;
- printk(BIOS_SPEW, " reg 0x%04x:", i);
- reg32 = *ioapic_data;
- printk(BIOS_SPEW, " 0x%08x\n", reg32);
- }
+ reg32 = io_apic_read(IO_APIC_ADDR, 0x01);
+ io_apic_write(IO_APIC_ADDR, 0x01, reg32);
- *ioapic_index = 3; /* Select Boot Configuration register. */
- *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
+ /*
+ * Select Boot Configuration register (0x03) and
+ * use Processor System Bus (0x01) to deliver interrupts.
+ */
+ io_apic_write(IO_APIC_ADDR, 0x03, 0x01);
}
static void pch_enable_serial_irqs(struct device *dev)
@@ -547,7 +533,7 @@ static void lpc_init(struct device *dev)
pci_write_config16(dev, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */
- pch_enable_apic(dev);
+ pch_enable_ioapic(dev);
pch_enable_serial_irqs(dev);
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h
index 21933b4660..c04957308f 100644
--- a/src/southbridge/intel/lynxpoint/pch.h
+++ b/src/southbridge/intel/lynxpoint/pch.h
@@ -236,6 +236,7 @@ unsigned get_gpios(const int *gpio_num_array);
#define PMBASE 0x40
#define ACPI_CNTL 0x44
+#define ACPI_EN (1 << 7)
#define BIOS_CNTL 0xDC
#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */
#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */