diff options
Diffstat (limited to 'src/southbridge')
-rw-r--r-- | src/southbridge/amd/rs780/rs780.c | 53 | ||||
-rw-r--r-- | src/southbridge/amd/rs780/rs780.h | 5 | ||||
-rw-r--r-- | src/southbridge/amd/rs780/rs780_cmn.c | 40 | ||||
-rw-r--r-- | src/southbridge/amd/rs780/rs780_early_setup.c | 8 | ||||
-rw-r--r-- | src/southbridge/amd/rs780/rs780_gfx.c | 260 | ||||
-rw-r--r-- | src/southbridge/amd/rs780/rs780_pcie.c | 1 |
6 files changed, 255 insertions, 112 deletions
diff --git a/src/southbridge/amd/rs780/rs780.c b/src/southbridge/amd/rs780/rs780.c index 3d23a453cd..d8f1be3dbe 100644 --- a/src/southbridge/amd/rs780/rs780.c +++ b/src/southbridge/amd/rs780/rs780.c @@ -133,11 +133,6 @@ static void rs780_nb_pci_table(device_t nb_dev) temp32 = pci_read_config32(nb_dev, 0x4c); printk(BIOS_DEBUG, "NB_PCI_REG4C = %x.\n", temp32); - /* disable GFX debug. */ - temp8 = pci_read_config8(nb_dev, 0x8d); - temp8 &= ~(1<<1); - pci_write_config8(nb_dev, 0x8d, temp8); - /* set temporary NB TOM to 0x40000000. */ rs780_set_tom(nb_dev); @@ -194,14 +189,24 @@ static void rs780_nb_pci_table(device_t nb_dev) static void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) { /* NB_InitGFXStraps */ - u32 MMIOBase, apc04, apc18, apc24; + u32 MMIOBase, apc04, apc18, apc24, romstrap2; + msr_t pcie_mmio_save; volatile u32 * strap; + // disable processor pcie mmio, if enabled + if (is_family10h()) { + msr_t temp; + pcie_mmio_save = temp = rdmsr (0xc0010058); + temp.lo &= ~1; + wrmsr (0xc0010058, temp); + } + /* Get PCIe configuration space. */ MMIOBase = pci_read_config32(nb_dev, 0x1c) & 0xfffffff0; /* Temporarily disable PCIe configuration space. */ set_htiu_enable_bits(nb_dev, 0x32, 1<<28, 0); + // 1E: NB_BIF_SPARE set_nbmisc_enable_bits(nb_dev, 0x1e, 0xffffffff, 1<<1 | 1<<4 | 1<<6 | 1<<7); /* Set a temporary Bus number. */ apc18 = pci_read_config32(dev, 0x18); @@ -214,18 +219,27 @@ static void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) pci_write_config8(dev, 0x04, 0x02); /* Program Straps. */ - strap = (volatile u32 *)(MMIOBase + 0x15020); + romstrap2 = 1 << 26; // enables audio function #if (CONFIG_GFXUMA == 1) - *strap = 1<<7; /* the format of BIF_MEM_AP_SIZE. 001->256MB? */ -#else - *strap = 0; /* 128M SP memory, 000 -> 128MB */ + extern uint64_t uma_memory_size; + // bits 7-9: aperture size + // 0-7: 128mb, 256mb, 64mb, 32mb, 512mb, 1g, 2g, 4g + if (uma_memory_size == 0x02000000) romstrap2 |= 3 << 7; + if (uma_memory_size == 0x04000000) romstrap2 |= 2 << 7; + if (uma_memory_size == 0x08000000) romstrap2 |= 0 << 7; + if (uma_memory_size == 0x10000000) romstrap2 |= 1 << 7; + if (uma_memory_size == 0x20000000) romstrap2 |= 4 << 7; + if (uma_memory_size == 0x40000000) romstrap2 |= 5 << 7; + if (uma_memory_size == 0x80000000) romstrap2 |= 6 << 7; #endif + strap = (volatile u32 *)(MMIOBase + 0x15020); + *strap = romstrap2; strap = (volatile u32 *)(MMIOBase + 0x15000); *strap = 0x2c006300; strap = (volatile u32 *)(MMIOBase + 0x15010); *strap = 0x03015330; - //strap = (volatile u32 *)(MMIOBase + 0x15020); - //*strap |= 0x00000040; /* Disable HDA device. */ + strap = (volatile u32 *)(MMIOBase + 0x15020); + *strap = romstrap2 | 0x00000040; strap = (volatile u32 *)(MMIOBase + 0x15030); *strap = 0x00001002; strap = (volatile u32 *)(MMIOBase + 0x15040); @@ -240,8 +254,9 @@ static void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) /* BIF switches into normal functional mode. */ set_nbmisc_enable_bits(nb_dev, 0x1e, 1<<4 | 1<<5, 1<<5); - /* NB Revision is A12. */ - set_nbmisc_enable_bits(nb_dev, 0x1e, 1<<9, 1<<9); + /* NB Revision is A12 or newer */ + if (get_nb_rev(nb_dev) >= REV_RS780_A12) + set_nbmisc_enable_bits(nb_dev, 0x1e, 1<<9, 1<<9); /* Restore APC04, APC18, APC24. */ pci_write_config32(dev, 0x04, apc04); @@ -250,6 +265,11 @@ static void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) /* Enable PCIe configuration space. */ set_htiu_enable_bits(nb_dev, 0x32, 0, 1<<28); + + // restore processor pcie mmio + if (is_family10h()) + wrmsr (0xc0010058, pcie_mmio_save); + printk(BIOS_INFO, "GC is accessible from now on.\n"); } @@ -332,18 +352,17 @@ void rs780_enable(device_t dev) (dev->enabled ? 1 : 0) << 6); if (dev->enabled) rs780_gpp_sb_init(nb_dev, dev, dev_ind); - disable_pcie_bar3(nb_dev); break; case 9: /* bus 0, dev 9,10, GPP */ case 10: printk(BIOS_INFO, "Bus-0, Dev-9, 10, Fun-0. enable=%d\n", dev->enabled); - enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind), (dev->enabled ? 0 : 1) << (7 + dev_ind)); if (dev->enabled) rs780_gpp_sb_init(nb_dev, dev, dev_ind); - /* Dont call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */ + + if (dev_ind == 10) disable_pcie_bar3(nb_dev); break; default: printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev)); diff --git a/src/southbridge/amd/rs780/rs780.h b/src/southbridge/amd/rs780/rs780.h index 7939303fe1..c91a4b3022 100644 --- a/src/southbridge/amd/rs780/rs780.h +++ b/src/southbridge/amd/rs780/rs780.h @@ -208,4 +208,9 @@ void avoid_lpc_dma_deadlock(device_t nb_dev, device_t sb_dev); void config_gpp_core(device_t nb_dev, device_t sb_dev); void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port); u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port); +u32 extractbit(u32 data, int bit_number); +u32 extractbits(u32 source, int lsb, int msb); +int cpuidFamily(void); +int is_family0Fh(void); +int is_family10h(void); #endif /* RS780_H */ diff --git a/src/southbridge/amd/rs780/rs780_cmn.c b/src/southbridge/amd/rs780/rs780_cmn.c index 8d80a06118..4bd870bbf2 100644 --- a/src/southbridge/amd/rs780/rs780_cmn.c +++ b/src/southbridge/amd/rs780/rs780_cmn.c @@ -29,6 +29,7 @@ #include <cpu/amd/mtrr.h> #include <boot/coreboot_tables.h> #include <delay.h> +#include <cpu/cpu.h> #include "rs780.h" static u32 nb_read_index(device_t dev, u32 index_reg, u32 index) @@ -361,3 +362,42 @@ void rs780_set_tom(device_t nb_dev) pci_write_config32(nb_dev, 0x90, uma_memory_base); //nbmc_write_index(nb_dev, 0x1e, uma_memory_base); } + +// extract single bit +u32 extractbit(u32 data, int bit_number) +{ + return (data >> bit_number) & 1; +} + +// extract bit field +u32 extractbits(u32 source, int lsb, int msb) +{ + int field_width = msb - lsb + 1; + u32 mask = 0xFFFFFFFF >> (32 - field_width); + return (source >> lsb) & mask; +} + +// return AMD cpuid family +int cpuidFamily(void) +{ + u32 baseFamily, extendedFamily, fms; + + fms = cpuid_eax (1); + baseFamily = extractbits (fms, 8, 11); + extendedFamily = extractbits (fms, 20, 27); + return baseFamily + extendedFamily; +} + + +// return non-zero for AMD family 0Fh processor found +int is_family0Fh(void) +{ + return cpuidFamily() == 0x0F; +} + + +// return non-zero for AMD family 10h processor found +int is_family10h(void) +{ + return cpuidFamily() == 0x10; +} diff --git a/src/southbridge/amd/rs780/rs780_early_setup.c b/src/southbridge/amd/rs780/rs780_early_setup.c index 236d95fef9..57a7b62427 100644 --- a/src/southbridge/amd/rs780/rs780_early_setup.c +++ b/src/southbridge/amd/rs780/rs780_early_setup.c @@ -483,9 +483,11 @@ static void rs780_por_pcicfg_init(device_t nb_dev) /* Reg94h[31:29] = 0x7 Enables HT transmitter de-emphasis */ set_nbcfg_enable_bits_8(nb_dev, 0x97, (u8)(~0x1F), 0xE0); - /*Reg8Ch[10:9] = 0x3 Enables Gfx Debug BAR, - * force this BAR as mem type in rs780_gfx.c */ - set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x03); + /* Reg8Ch[9] enables Gfx Debug BAR programming + * Reg8Ch[10] enables Gfx Debug BAR operation + * Enable programming of the debug bar now, but enable + * operation only after it has been programmed */ + set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x02); } static void rs780_por_mc_index_init(device_t nb_dev) diff --git a/src/southbridge/amd/rs780/rs780_gfx.c b/src/southbridge/amd/rs780/rs780_gfx.c index a9801a17cd..c2a220cf19 100644 --- a/src/southbridge/amd/rs780/rs780_gfx.c +++ b/src/southbridge/amd/rs780/rs780_gfx.c @@ -39,6 +39,8 @@ extern int is_dev3_present(void); void set_pcie_reset(void); void set_pcie_dereset(void); +extern uint64_t uma_memory_base, uma_memory_size; + /* Trust the original resource allocation. Don't do it again. */ #undef DONT_TRUST_RESOURCE_ALLOCATION //#define DONT_TRUST_RESOURCE_ALLOCATION @@ -304,11 +306,15 @@ static void internal_gfx_pci_dev_init(struct device *dev) volatile u32 * pointer; int i; u16 command; - u32 value, sblk; + u32 value; u16 deviceid, vendorid; device_t nb_dev = dev_find_slot(0, 0); device_t k8_f2 = dev_find_slot(0, PCI_DEVFN(0x18, 2)); device_t k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0)); + static const u8 ht_freq_lookup [] = {2, 0, 4, 0, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 0, 0, 28, 30, 32}; + static const u8 ht_width_lookup [] = {8, 16, 0, 0, 2, 4, 0, 0}; + static const u16 memclk_lookup_fam0F [] = {100, 0, 133, 0, 0, 166, 0, 200}; + static const u16 memclk_lookup_fam10 [] = {200, 266, 333, 400, 533, 667, 800, 800}; /* We definetely will use this in future. Just leave it here. */ /*struct southbridge_amd_rs780_config *cfg = @@ -339,6 +345,8 @@ static void internal_gfx_pci_dev_init(struct device *dev) *(GpuF0MMReg + 0x2180/4) = ((value&0xff00)>>8)|((value&0xff000000)>>8); *(GpuF0MMReg + 0x2c04/4) = ((value&0xff00)<<8); *(GpuF0MMReg + 0x5428/4) = ((value&0xffff0000)+0x10000)-((value&0xffff)<<16); + *(GpuF0MMReg + 0xF774/4) = 0xffffffff; + *(GpuF0MMReg + 0xF770/4) = 0x00000001; *(GpuF0MMReg + 0x2000/4) = 0x00000011; *(GpuF0MMReg + 0x200c/4) = 0x00000020; *(GpuF0MMReg + 0x2010/4) = 0x10204810; @@ -352,21 +360,28 @@ static void internal_gfx_pci_dev_init(struct device *dev) *(GpuF0MMReg + 0x7de4/4) |= (1<<3) | (1<<4); /* Force allow LDT_STOP Cool'n'Quiet workaround. */ *(GpuF0MMReg + 0x655c/4) |= 1<<4; + + // disable write combining, needed for stability
+ // reference bios does this only for RS780 rev A11
+ // need to figure out why we need it for all revs + *(GpuF0MMReg + 0x2000/4) = 0x00000010; + *(GpuF0MMReg + 0x2408/4) = 1 << 9; + *(GpuF0MMReg + 0x2000/4) = 0x00000011; + /* GFX_InitFBAccess finished. */ - /* GFX_StartMC. */ #if (CONFIG_GFXUMA == 1) /* for UMA mode. */ - /* MC_INIT_COMPLETE. */ - set_nbmc_enable_bits(nb_dev, 0x2, 0, 1<<31); - /* MC_STARTUP, MC_POWERED_UP and MC_VMODE.*/ - set_nbmc_enable_bits(nb_dev, 0x1, 1<<18, 1|1<<2); - - set_nbmc_enable_bits(nb_dev, 0xb1, 0, 1<<6); - set_nbmc_enable_bits(nb_dev, 0xc3, 0, 1); - nbmc_write_index(nb_dev, 0x07, 0x18); - nbmc_write_index(nb_dev, 0x06, 0x00000102); - nbmc_write_index(nb_dev, 0x09, 0x40000008); - set_nbmc_enable_bits(nb_dev, 0x6, 0, 1<<31); + /* GFX_StartMC. */ + set_nbmc_enable_bits(nb_dev, 0x02, 0x00000000, 0x80000000); + set_nbmc_enable_bits(nb_dev, 0x01, 0x00000000, 0x00000001); + set_nbmc_enable_bits(nb_dev, 0x01, 0x00000000, 0x00000004); + set_nbmc_enable_bits(nb_dev, 0x01, 0x00040000, 0x00000000); + set_nbmc_enable_bits(nb_dev, 0xB1, 0xFFFF0000, 0x00000040); + set_nbmc_enable_bits(nb_dev, 0xC3, 0x00000000, 0x00000001); + set_nbmc_enable_bits(nb_dev, 0x07, 0xFFFFFFFF, 0x00000018); + set_nbmc_enable_bits(nb_dev, 0x06, 0xFFFFFFFF, 0x00000102); + set_nbmc_enable_bits(nb_dev, 0x09, 0xFFFFFFFF, 0x40000008); + set_nbmc_enable_bits(nb_dev, 0x06, 0x00000000, 0x80000000); /* GFX_StartMC finished. */ #else /* for SP mode. */ @@ -418,77 +433,110 @@ static void internal_gfx_pci_dev_init(struct device *dev) vgainfo.sHeader.ucTableContentRevision = 2; #if (CONFIG_GFXUMA == 0) /* SP mode. */ + // Side port support is incomplete, do not use it + // These parameters must match the motherboard vgainfo.ulBootUpSidePortClock = 667*100; - vgainfo.ucMemoryType = 3; + vgainfo.ucMemoryType = 3; // 3=ddr3 sp mem, 2=ddr2 sp mem vgainfo.ulMinSidePortClock = 333*100; #endif - vgainfo.ulBootUpEngineClock = 500 * 100; /* set boot up GFX engine clock. */ - vgainfo.ulReserved1[0] = 0; vgainfo.ulReserved1[1] = 0; - value = pci_read_config32(k8_f2, 0x94); - printk(BIOS_DEBUG, "MEMCLK = %x\n", value&0x7); - vgainfo.ulBootUpUMAClock = 333 * 100; /* set boot up UMA memory clock. */ - vgainfo.ulBootUpSidePortClock = 0; /* disable SP. */ - vgainfo.ulMinSidePortClock = 0; /* disable SP. */ - for(i=0; i<6; i++) - vgainfo.ulReserved2[i] = 0; - vgainfo.ulSystemConfig = 0; - //vgainfo.ulSystemConfig |= 1<<1 | 1<<3 | 1<<4 | 1<<5 | 1<<6 | 1<<7 | 1; - vgainfo.ulBootUpReqDisplayVector = 0; //? - vgainfo.ulOtherDisplayMisc = 0; //? - vgainfo.ulDDISlot1Config = 0x000c0011; //0; //VGA - //vgainfo.ulDDISlot1Config = 0x000c00FF; //0; //HDMI - vgainfo.ulDDISlot2Config = 0x00130022; //0; //? - vgainfo.ucMemoryType = 2; + vgainfo.ulBootUpEngineClock = 500 * 100; // setup option on reference BIOS, 500 is default + + // find the DDR memory frequency + if (is_family10h()) { + value = pci_read_config32(k8_f2, 0x94); // read channel 0 DRAM Configuration High Register + if (extractbit(value, 14)) // if channel 0 disabled, channel 1 must have memory + value = pci_read_config32(k8_f2, 0x194);// read channel 1 DRAM Configuration High Register + vgainfo.ulBootUpUMAClock = memclk_lookup_fam10 [extractbits (value, 0, 2)] * 100; + } + if (is_family0Fh()) { + value = pci_read_config32(k8_f2, 0x94); + vgainfo.ulBootUpUMAClock = memclk_lookup_fam0F [extractbits (value, 20, 22)] * 100; + } + /* UMA Channel Number: 1 or 2. */ - vgainfo.ucUMAChannelNumber = 2; - vgainfo.ucDockingPinBit = 0; //? - vgainfo.ucDockingPinPolarity = 0; //? - vgainfo.ulDockingPinCFGInfo = 0; //? - vgainfo.ulCPUCapInfo = 3; /* K8. */ - - /* page 5-19 on BDG. */ - vgainfo.usNumberOfCyclesInPeriod = 0x8019; - vgainfo.usMaxNBVoltage = 0x1a; - vgainfo.usMinNBVoltage = 0; - vgainfo.usBootUpNBVoltage = 0x1a; - - /* Get SBLink value (HyperTransport I/O Hub Link ID). */ - value = pci_read_config32(k8_f0, 0x64); - sblk = (value >> 8) & 0x3; - printk(BIOS_DEBUG, "SBLINK = %d.\n", sblk); + vgainfo.ucUMAChannelNumber = 1; + if (is_family0Fh()) { + value = pci_read_config32(k8_f2, 0x90); + if (extractbit(value, 11)) // 128-bit mode + vgainfo.ucUMAChannelNumber = 2; + } + if (is_family10h()) { + u32 dch0 = pci_read_config32(k8_f2, 0x94); + u32 dch1 = pci_read_config32(k8_f2, 0x194); + if (extractbit(dch0, 14) == 0 && extractbit(dch1, 14) == 0) { // both channels enabled + value = pci_read_config32(k8_f2, 0x110); + if (extractbit(value, 4)) // ganged mode + vgainfo.ucUMAChannelNumber = 2; + } + } + + // processor type + if (is_family0Fh()) + vgainfo.ulCPUCapInfo = 3; + if (is_family10h()) + vgainfo.ulCPUCapInfo = 2; /* HT speed */ - value = pci_read_config32(nb_dev, 0xd0); - printk(BIOS_DEBUG, "NB HT speed = %x.\n", value); - value = pci_read_config32(k8_f0, 0x88 + (sblk * 0x20)); - printk(BIOS_DEBUG, "CPU HT speed = %x.\n", value); - vgainfo.ulHTLinkFreq = 100 * 100; /* set HT speed. */ + value = pci_read_config8(nb_dev, 0xd1); + value = ht_freq_lookup [value] * 100; // HT link frequency in MHz + vgainfo.ulHTLinkFreq = value * 100; // HT frequency in units of 100 MHz + vgainfo.ulHighVoltageHTLinkFreq = vgainfo.ulHTLinkFreq; + vgainfo.ulLowVoltageHTLinkFreq = vgainfo.ulHTLinkFreq; + + if (value <= 1800) + vgainfo.ulLowVoltageHTLinkFreq = vgainfo.ulHTLinkFreq; + else { + int sblink, cpuLnkFreqCap, nbLnkFreqCap; + value = pci_read_config32(k8_f0, 0x64); + sblink = extractbits(value, 8, 10); + cpuLnkFreqCap = pci_read_config16(k8_f0, 0x8a + sblink * 0x20); + nbLnkFreqCap = pci_read_config16(nb_dev, 0xd2); + if (cpuLnkFreqCap & nbLnkFreqCap & (1 << 10)) // if both 1800 MHz capable + vgainfo.ulLowVoltageHTLinkFreq = 1800*100; + } /* HT width. */ - value = pci_read_config32(nb_dev, 0xc8); - printk(BIOS_DEBUG, "HT width = %x.\n", value); - vgainfo.usMinHTLinkWidth = 16; - vgainfo.usMaxHTLinkWidth = 16; - vgainfo.usUMASyncStartDelay = 322; - vgainfo.usUMADataReturnTime = 86; - vgainfo.usLinkStatusZeroTime = 0x00c8; //0; //? - vgainfo.usReserved = 0; - vgainfo.ulHighVoltageHTLinkFreq = 100 * 100; - vgainfo.ulLowVoltageHTLinkFreq = 100 * 100; - vgainfo.usMaxUpStreamHTLinkWidth = 16; - vgainfo.usMaxDownStreamHTLinkWidth = 16; - vgainfo.usMinUpStreamHTLinkWidth = 16; - vgainfo.usMinDownStreamHTLinkWidth = 16; - for(i=0; i<97; i++) - vgainfo.ulReserved3[i] = 0; + value = pci_read_config8(nb_dev, 0xcb); + vgainfo.usMinDownStreamHTLinkWidth = + vgainfo.usMaxDownStreamHTLinkWidth = + vgainfo.usMinUpStreamHTLinkWidth = + vgainfo.usMaxUpStreamHTLinkWidth = + vgainfo.usMinHTLinkWidth = + vgainfo.usMaxHTLinkWidth = ht_width_lookup [extractbits(value, 0, 2)]; + + if (is_family0Fh()) { + vgainfo.usUMASyncStartDelay = 322; + vgainfo.usUMADataReturnTime = 286; + } + + if (is_family10h()) { + static u16 t0mult_lookup [] = {10, 50, 200, 2000}; + int t0time, t0scale; + value = pci_read_config32(k8_f0, 0x16c); + t0time = extractbits(value, 0, 3); + t0scale = extractbits(value, 4, 5); + vgainfo.usLinkStatusZeroTime = t0mult_lookup [t0scale] * t0time; + vgainfo.usUMASyncStartDelay = 100; + if (vgainfo.ulHTLinkFreq < 1000 * 100) { // less than 1000 MHz + vgainfo.usUMADataReturnTime = 300; + vgainfo.usLinkStatusZeroTime = 6 * 100; // 6us for GH in HT1 mode + } + else { + int lssel; + value = pci_read_config32(nb_dev, 0xac); + lssel = extractbits (value, 7, 8); + vgainfo.usUMADataReturnTime = 1300; + if (lssel == 0) vgainfo.usUMADataReturnTime = 150; + } + } /* Transfer the Table to VBIOS. */ pointer = (u32 *)&vgainfo; for(i=0; i<sizeof(ATOM_INTEGRATED_SYSTEM_INFO_V2); i+=4) { #if (CONFIG_GFXUMA == 1) - *GpuF0MMReg = 0x80000000 + 0x10000000 - 512 + i; + *GpuF0MMReg = 0x80000000 + uma_memory_size - 512 + i; #else *GpuF0MMReg = 0x80000000 + 0x8000000 - 512 + i; #endif @@ -497,11 +545,22 @@ static void internal_gfx_pci_dev_init(struct device *dev) /* GFX_InitLate. */ { - u8 temp8; - temp8 = pci_read_config8(dev, 0x4); - //temp8 &= ~1; /* CIM clears this bit. Strangely, I can'd. */ - temp8 |= 1<<1|1<<2; - pci_write_config8(dev, 0x4, temp8); + u32 temp; + temp = pci_read_config8(dev, 0x4); + //temp &= ~1; /* CIM clears this bit. Strangely, I can'd. */ + temp |= 1<<1|1<<2; + pci_write_config8(dev, 0x4, temp); + + // if the GFX debug bar is writable, then it has + // been programmed and can be safely enabled now + temp = pci_read_config32(nb_dev, 0x8c); + + // if bits 1 (intgfx_enable) and 9 (gfx_debug_bar_enable) + // then enable gfx debug bar (set gxf_debug_decode_enable) + if (temp & 0x202) + temp |= (1 << 10); + pci_write_config32(nb_dev, 0x8c, temp); + } #ifdef DONT_TRUST_RESOURCE_ALLOCATION @@ -584,7 +643,6 @@ static void internal_gfx_pci_dev_init(struct device *dev) * Set registers in RS780 and CPU to enable the internal GFX. * Please refer to CIM source code and BKDG. */ -extern uint64_t uma_memory_base, uma_memory_size; static void rs780_internal_gfx_enable(device_t dev) { @@ -637,7 +695,9 @@ static void rs780_internal_gfx_enable(device_t dev) #if (CONFIG_GFXUMA == 1) /* GFX_InitUMA. */ /* Copy CPU DDR Controller to NB MC. */ + device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18, 1)); device_t k8_f2 = dev_find_slot(0, PCI_DEVFN(0x18, 2)); + device_t k8_f4 = dev_find_slot(0, PCI_DEVFN(0x18, 4)); for (i = 0; i < 12; i++) { l_dword = pci_read_config32(k8_f2, 0x40 + i * 4); @@ -646,23 +706,39 @@ static void rs780_internal_gfx_enable(device_t dev) l_dword = pci_read_config32(k8_f2, 0x80); nbmc_write_index(nb_dev, 0x3c, l_dword); - l_dword = pci_read_config32(k8_f2, 0x94); - if(l_dword & (1<<22)) - set_nbmc_enable_bits(nb_dev, 0x3c, 0, 1<<16); - else - set_nbmc_enable_bits(nb_dev, 0x3c, 1<<16, 0); - - if(l_dword & (1<<8)) - set_nbmc_enable_bits(nb_dev, 0x3c, 0, 1<<17); - else - set_nbmc_enable_bits(nb_dev, 0x3c, 1<<17, 0); - + set_nbmc_enable_bits(nb_dev, 0x3c, 0, !!(l_dword & (1<<22))<<16); + set_nbmc_enable_bits(nb_dev, 0x3c, 0, !!(l_dword & (1<< 8))<<17); l_dword = pci_read_config32(k8_f2, 0x90); - if(l_dword & (1<<10)) - set_nbmc_enable_bits(nb_dev, 0x3c, 0, 1<<18); - else - set_nbmc_enable_bits(nb_dev, 0x3c, 1<<18, 0); + set_nbmc_enable_bits(nb_dev, 0x3c, 0, !!(l_dword & (1<<10))<<18); + if (is_family10h()) + { + for (i = 0; i < 12; i++) + { + l_dword = pci_read_config32(k8_f2, 0x140 + i * 4); + nbmc_write_index(nb_dev, 0x3d + i, l_dword); + } + + l_dword = pci_read_config32(k8_f2, 0x180); + nbmc_write_index(nb_dev, 0x49, l_dword); + l_dword = pci_read_config32(k8_f2, 0x194); + set_nbmc_enable_bits(nb_dev, 0x49, 0, !!(l_dword & (1<<22))<<16); + set_nbmc_enable_bits(nb_dev, 0x49, 0, !!(l_dword & (1<< 8))<<17); + l_dword = pci_read_config32(k8_f2, 0x190); + set_nbmc_enable_bits(nb_dev, 0x49, 0, !!(l_dword & (1<<10))<<18); + + l_dword = pci_read_config32(k8_f2, 0x110); + nbmc_write_index(nb_dev, 0x4a, l_dword); + l_dword = pci_read_config32(k8_f2, 0x114); + nbmc_write_index(nb_dev, 0x4b, l_dword); + l_dword = pci_read_config32(k8_f4, 0x44); + set_nbmc_enable_bits(nb_dev, 0x4a, 0, !!(l_dword & (1<<22))<<24); + l_dword = pci_read_config32(k8_f1, 0x40); + nbmc_write_index(nb_dev, 0x4c, l_dword); + l_dword = pci_read_config32(k8_f1, 0xf0); + nbmc_write_index(nb_dev, 0x4d, l_dword); + } + /* Set UMA in the 780 side. */ /* UMA start address, size. */ @@ -672,7 +748,7 @@ static void rs780_internal_gfx_enable(device_t dev) nbmc_write_index(nb_dev, 0x10, ((uma_memory_size - 1 + 0xC0000000) & (~0xffff)) | 0xc000); nbmc_write_index(nb_dev, 0x11, uma_memory_base); nbmc_write_index(nb_dev, 0x12, 0); - nbmc_write_index(nb_dev, 0xf0, 256); + nbmc_write_index(nb_dev, 0xf0, uma_memory_size >> 20); /* GFX_InitUMA finished. */ #else /* GFX_InitSP. */ @@ -1016,7 +1092,7 @@ void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) /* 5.9.1.1. Disables the GFX REFCLK transmitter so that the GFX * REFCLK PAD can be driven by an external source. */ /* 5.9.1.2. Enables GFX REFCLK receiver to receive the REFCLK from an external source. */ - set_nbmisc_enable_bits(nb_dev, 0x38, 1 << 29 | 1 << 28, 0 << 29 | 1 << 28); + set_nbmisc_enable_bits(nb_dev, 0x38, 1 << 29 | 1 << 28 | 1 << 26, 1 << 28); /* 5.9.1.3 Selects the GFX REFCLK to be the source for PLL A. */ /* 5.9.1.4 Selects the GFX REFCLK to be the source for PLL B. */ diff --git a/src/southbridge/amd/rs780/rs780_pcie.c b/src/southbridge/amd/rs780/rs780_pcie.c index c705614bf0..9cbd832661 100644 --- a/src/southbridge/amd/rs780/rs780_pcie.c +++ b/src/southbridge/amd/rs780/rs780_pcie.c @@ -221,6 +221,7 @@ void disable_pcie_bar3(device_t nb_dev) printk(BIOS_DEBUG, "disable_pcie_bar3()\n"); pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */ + set_htiu_enable_bits(nb_dev, 0x32, 1 << 28, 0); /* disable bar3 decode */ ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS); } |