diff options
Diffstat (limited to 'src/southbridge/via/k8t890/dram.c')
| -rw-r--r-- | src/southbridge/via/k8t890/dram.c | 197 |
1 files changed, 0 insertions, 197 deletions
diff --git a/src/southbridge/via/k8t890/dram.c b/src/southbridge/via/k8t890/dram.c deleted file mode 100644 index 1f126ccaab..0000000000 --- a/src/southbridge/via/k8t890/dram.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> - * Copyright (C) 2011 Alexandru Gagniuc <mr.nuke.me@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <console/console.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <pc80/mc146818rtc.h> -#include <lib.h> -#include "k8x8xx.h" - -static void dram_enable(struct device *dev) -{ - u16 reg; - struct k8x8xx_vt8237_mirrored_regs mregs; - - k8x8xx_vt8237_mirrored_regs_fill(&mregs); - /* - * Enable Lowest Interrupt arbitration for APIC, enable NB APIC - * decoding, MSI support, no SMRAM, compatible SMM. - */ - pci_write_config8(dev, 0x86, mregs.smm_apic_decoding); - - /* - * We want to use the 0xC0000-0xEFFFF as RAM mark area as RW, even if - * memory is doing K8 the DMA from SB will fail if we have it wrong, - * AND even we have it here, we must later copy it to SB to make it work :/ - */ - - /* For CC000-CFFFF, bits 7:6 (10 = REn, 01 = WEn) bits 1:0 for - * C0000-C3FFF etc. - */ - pci_write_config8(dev, 0x80, mregs.rom_shadow_ctrl_pg_c); - /* For page D0000-DFFFF */ - pci_write_config8(dev, 0x81, mregs.rom_shadow_ctrl_pg_d); - /* For page E0000-EFFFF */ - pci_write_config8(dev, 0x82, mregs.rom_shadow_ctrl_pg_e_memhole_smi_decoding); - pci_write_config8(dev, 0x83, mregs.rom_shadow_ctrl_pg_f_memhole); - - reg = pci_read_config16(dev, 0x84); - reg &= 0xf; - pci_write_config16(dev, 0x84, mregs.low_top_address | reg); - - reg = pci_read_config16(dev, 0x88); - reg &= 0xf800; - - /* The Address Next to the Last Valid DRAM Address */ - pci_write_config16(dev, 0x88, reg | mregs.shadow_mem_ctrl); - - printk(BIOS_DEBUG, " VIA_X_3 device dump:\n"); - dump_south(dev); - -} - -static void dram_enable_k8m890(struct device *dev) -{ -#if IS_ENABLED(CONFIG_GFXUMA) - msr_t msr; - int ret; - unsigned int fbbits; - - /* use CMOS */ - if (CONFIG_VIDEO_MB == -1) { - ret = get_option(&fbbits, "videoram_size"); - if (ret) { - printk(BIOS_WARNING, "Failed to get videoram size (error %d), using default.\n", ret); - fbbits = 5; - } - - if ((fbbits < 1) || (fbbits > 7)) { - printk(BIOS_WARNING, "Invalid videoram size (%d), using default.\n", - 4 << fbbits); - fbbits = 5; - } - uma_memory_size = 4 << (fbbits + 20); - } else { - uma_memory_size = (CONFIG_VIDEO_MB << 20); - } - - msr = rdmsr(TOP_MEM); - uma_memory_base = msr.lo - uma_memory_size; - printk(BIOS_INFO, "K8M890: UMA base is %llx size is %u (MB)\n", uma_memory_base, - (u32) (uma_memory_size / 1024 / 1024)); - /* enable VGA, so the bridges gets VGA_EN and resources are set */ - pci_write_config8(dev, 0xa1, 0x80); -#endif - dram_enable(dev); -} - -int -k8m890_host_fb_size_get(void) -{ - struct device *dev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_K8M800_DRAM, 0); - if (!dev) dev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_K8M890CE_3, 0); - unsigned char tmp; - - tmp = pci_read_config8(dev, 0xA1); - tmp >>= 4; - if (tmp & 0x08) - return 4 << (tmp & 7); - else - return 0; -} - -static void dram_init_fb(struct device *dev) -{ -#if IS_ENABLED(CONFIG_GFXUMA) - /* Important bits: - * Enable the internal GFX bit 7 of reg 0xa1 plus in same reg: - * bits 6:4 X fbuffer size will be 2^(X+2) or 100 = 64MB, 101 = 128MB - * bits 3:0 BASE [31:28] - * reg 0xa0 bits 7:1 BASE [27:21] bit0 enable CPU access - */ - unsigned int fbbits = 0; - u8 tmp; - - fbbits = ((log2(uma_memory_size >> 20) - 2) << 4); - printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", (unsigned int) (uma_memory_size >> 20)); - - /* Step 1: enable UMA but no FB */ - pci_write_config8(dev, 0xa1, 0x80); - - /* Step 2: enough is just the FB size, the CPU accessible address is not needed */ - tmp = fbbits | 0x80; - pci_write_config8(dev, 0xa1, tmp); - - /* TODO K8 needs some UMA fine tuning too maybe call some generic routine here? */ -#endif -} - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static const struct device_operations dram_ops_t = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .enable = dram_enable, - .ops_pci = &lops_pci, -}; - -static const struct device_operations dram_ops_m = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .enable = dram_enable_k8m890, - .init = dram_init_fb, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver northbridge_driver_t800 __pci_driver = { - .ops = &dram_ops_t, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_K8T800_DRAM, -}; - -static const struct pci_driver northbridge_driver_m800 __pci_driver = { - .ops = &dram_ops_m, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_K8M800_DRAM, -}; - -static const struct pci_driver northbridge_driver_t890 __pci_driver = { - .ops = &dram_ops_t, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_K8T890CE_3, -}; - -static const struct pci_driver northbridge_driver_t890cf __pci_driver = { - .ops = &dram_ops_t, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_K8T890CF_3, -}; - -static const struct pci_driver northbridge_driver_m890 __pci_driver = { - .ops = &dram_ops_m, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_K8M890CE_3, -}; |