diff options
Diffstat (limited to 'src/southbridge/intel')
-rw-r--r-- | src/southbridge/intel/bd82x6x/Kconfig | 1 | ||||
-rw-r--r-- | src/southbridge/intel/bd82x6x/azalia.c | 31 | ||||
-rw-r--r-- | src/southbridge/intel/i82801gx/Kconfig | 1 | ||||
-rw-r--r-- | src/southbridge/intel/i82801gx/azalia.c | 33 | ||||
-rw-r--r-- | src/southbridge/intel/i82801ix/Kconfig | 1 | ||||
-rw-r--r-- | src/southbridge/intel/i82801ix/azalia.c | 33 | ||||
-rw-r--r-- | src/southbridge/intel/i82801jx/Kconfig | 1 | ||||
-rw-r--r-- | src/southbridge/intel/i82801jx/azalia.c | 33 | ||||
-rw-r--r-- | src/southbridge/intel/ibexpeak/Kconfig | 1 | ||||
-rw-r--r-- | src/southbridge/intel/ibexpeak/azalia.c | 31 | ||||
-rw-r--r-- | src/southbridge/intel/lynxpoint/Kconfig | 1 | ||||
-rw-r--r-- | src/southbridge/intel/lynxpoint/hda_verb.c | 31 |
12 files changed, 21 insertions, 177 deletions
diff --git a/src/southbridge/intel/bd82x6x/Kconfig b/src/southbridge/intel/bd82x6x/Kconfig index 7852ace972..3b05a3e678 100644 --- a/src/southbridge/intel/bd82x6x/Kconfig +++ b/src/southbridge/intel/bd82x6x/Kconfig @@ -11,6 +11,7 @@ if SOUTHBRIDGE_INTEL_BD82X6X || SOUTHBRIDGE_INTEL_C216 config SOUTH_BRIDGE_OPTIONS # dummy def_bool y select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select AZALIA_PLUGIN_SUPPORT select SOUTHBRIDGE_INTEL_COMMON_FINALIZE select SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ select SOUTHBRIDGE_INTEL_COMMON_SMBUS diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c index 972b2531e2..5e810c4cc0 100644 --- a/src/southbridge/intel/bd82x6x/azalia.c +++ b/src/southbridge/intel/bd82x6x/azalia.c @@ -14,39 +14,12 @@ typedef struct southbridge_intel_bd82x6x_config config_t; -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to match what was just written to it */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - static int codec_detect(u8 *base) { u8 reg8; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) goto no_codec; /* Write back the value once reset bit is set. */ @@ -63,7 +36,7 @@ static int codec_detect(u8 *base) no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + HDA_GCTL_REG, 1, 0); + azalia_set_bits(base + HDA_GCTL_REG, 1, 0); printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } diff --git a/src/southbridge/intel/i82801gx/Kconfig b/src/southbridge/intel/i82801gx/Kconfig index 50f7c6093c..2d3bf24b3e 100644 --- a/src/southbridge/intel/i82801gx/Kconfig +++ b/src/southbridge/intel/i82801gx/Kconfig @@ -3,6 +3,7 @@ config SOUTHBRIDGE_INTEL_I82801GX bool select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select AZALIA_PLUGIN_SUPPORT select IOAPIC select USE_WATCHDOG_ON_BOOT select HAVE_SMI_HANDLER diff --git a/src/southbridge/intel/i82801gx/azalia.c b/src/southbridge/intel/i82801gx/azalia.c index 1927adc749..a511468171 100644 --- a/src/southbridge/intel/i82801gx/azalia.c +++ b/src/southbridge/intel/i82801gx/azalia.c @@ -11,43 +11,16 @@ #include "chip.h" #include "i82801gx.h" -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to match what was just written to it */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - static int codec_detect(u8 *base) { u32 reg32; /* Set Bit 0 to 0 to enter reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0) < 0) goto no_codec; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) goto no_codec; /* Read in Codec location (BAR + 0xe)[2..0] */ @@ -61,7 +34,7 @@ static int codec_detect(u8 *base) no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + HDA_GCTL_REG, 1, 0); + azalia_set_bits(base + HDA_GCTL_REG, 1, 0); printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } diff --git a/src/southbridge/intel/i82801ix/Kconfig b/src/southbridge/intel/i82801ix/Kconfig index 11a6d39938..be640db0c3 100644 --- a/src/southbridge/intel/i82801ix/Kconfig +++ b/src/southbridge/intel/i82801ix/Kconfig @@ -3,6 +3,7 @@ config SOUTHBRIDGE_INTEL_I82801IX bool select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select AZALIA_PLUGIN_SUPPORT select HAVE_SMI_HANDLER if !NO_SMM select HAVE_USBDEBUG_OPTIONS select INTEL_DESCRIPTOR_MODE_CAPABLE diff --git a/src/southbridge/intel/i82801ix/azalia.c b/src/southbridge/intel/i82801ix/azalia.c index d6c75339a8..7078e6798b 100644 --- a/src/southbridge/intel/i82801ix/azalia.c +++ b/src/southbridge/intel/i82801ix/azalia.c @@ -11,43 +11,16 @@ #include "chip.h" #include "i82801ix.h" -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to match what was just written to it */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - static int codec_detect(u8 *base) { u32 reg32; /* Set Bit 0 to 0 to enter reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0) < 0) goto no_codec; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) goto no_codec; /* Read in Codec location (BAR + 0xe)[2..0] */ @@ -61,7 +34,7 @@ static int codec_detect(u8 *base) no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + HDA_GCTL_REG, 1, 0); + azalia_set_bits(base + HDA_GCTL_REG, 1, 0); printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } diff --git a/src/southbridge/intel/i82801jx/Kconfig b/src/southbridge/intel/i82801jx/Kconfig index 6abeac1f49..687cb45924 100644 --- a/src/southbridge/intel/i82801jx/Kconfig +++ b/src/southbridge/intel/i82801jx/Kconfig @@ -3,6 +3,7 @@ config SOUTHBRIDGE_INTEL_I82801JX bool select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select AZALIA_PLUGIN_SUPPORT select HAVE_POWER_STATE_AFTER_FAILURE select HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE select HAVE_SMI_HANDLER diff --git a/src/southbridge/intel/i82801jx/azalia.c b/src/southbridge/intel/i82801jx/azalia.c index bf41490a00..982efb7412 100644 --- a/src/southbridge/intel/i82801jx/azalia.c +++ b/src/southbridge/intel/i82801jx/azalia.c @@ -11,43 +11,16 @@ #include "chip.h" #include "i82801jx.h" -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to match what was just written to it */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - static int codec_detect(u8 *base) { u32 reg32; /* Set Bit 0 to 0 to enter reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0) < 0) goto no_codec; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) goto no_codec; /* Read in Codec location (BAR + 0xe)[2..0] */ @@ -61,7 +34,7 @@ static int codec_detect(u8 *base) no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + HDA_GCTL_REG, 1, 0); + azalia_set_bits(base + HDA_GCTL_REG, 1, 0); printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } diff --git a/src/southbridge/intel/ibexpeak/Kconfig b/src/southbridge/intel/ibexpeak/Kconfig index 07f9b6b110..c54c7e4d6c 100644 --- a/src/southbridge/intel/ibexpeak/Kconfig +++ b/src/southbridge/intel/ibexpeak/Kconfig @@ -8,6 +8,7 @@ if SOUTHBRIDGE_INTEL_IBEXPEAK config SOUTH_BRIDGE_OPTIONS # dummy def_bool y select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select AZALIA_PLUGIN_SUPPORT select IOAPIC select HAVE_SMI_HANDLER select USE_WATCHDOG_ON_BOOT diff --git a/src/southbridge/intel/ibexpeak/azalia.c b/src/southbridge/intel/ibexpeak/azalia.c index 97e705e287..0c19598aa3 100644 --- a/src/southbridge/intel/ibexpeak/azalia.c +++ b/src/southbridge/intel/ibexpeak/azalia.c @@ -10,39 +10,12 @@ #include <device/azalia_device.h> #include "pch.h" -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to match what was just written to it */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - static int codec_detect(u8 *base) { u8 reg8; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) goto no_codec; /* Write back the value once reset bit is set. */ @@ -59,7 +32,7 @@ static int codec_detect(u8 *base) no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + HDA_GCTL_REG, 1, 0); + azalia_set_bits(base + HDA_GCTL_REG, 1, 0); printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } diff --git a/src/southbridge/intel/lynxpoint/Kconfig b/src/southbridge/intel/lynxpoint/Kconfig index 7ba86b8fcc..a88a9a8bc2 100644 --- a/src/southbridge/intel/lynxpoint/Kconfig +++ b/src/southbridge/intel/lynxpoint/Kconfig @@ -8,6 +8,7 @@ if SOUTHBRIDGE_INTEL_LYNXPOINT config SOUTH_BRIDGE_OPTIONS # dummy def_bool y select ACPI_INTEL_HARDWARE_SLEEP_VALUES + select AZALIA_PLUGIN_SUPPORT select SOUTHBRIDGE_INTEL_COMMON_SMBUS select SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS select SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9 diff --git a/src/southbridge/intel/lynxpoint/hda_verb.c b/src/southbridge/intel/lynxpoint/hda_verb.c index 24897cab91..7c6537d003 100644 --- a/src/southbridge/intel/lynxpoint/hda_verb.c +++ b/src/southbridge/intel/lynxpoint/hda_verb.c @@ -8,39 +8,12 @@ #include "pch.h" #include "hda_verb.h" -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to match what was just written to it */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - int hda_codec_detect(u8 *base) { u8 reg8; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) + if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) goto no_codec; /* Write back the value once reset bit is set. */ @@ -57,7 +30,7 @@ int hda_codec_detect(u8 *base) no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0); + azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0); printk(BIOS_DEBUG, "HDA: No codec!\n"); return 0; } |