diff options
Diffstat (limited to 'src/southbridge/intel/lynxpoint/pch.h')
| -rw-r--r-- | src/southbridge/intel/lynxpoint/pch.h | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index 283335605d..9c6a668214 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -205,7 +205,7 @@ void mainboard_config_rcba(void); #define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ #define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[2:0] */ #define LPC_IBDF 0x6C /* I/O APIC bus/dev/fn */ -#define LPC_HnBDF(n) (0x70 + n * 2) /* HPET n bus/dev/fn */ +#define LPC_HnBDF(n) (0x70 + (n) * 2) /* HPET n bus/dev/fn */ #define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */ #define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */ #define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ @@ -249,7 +249,7 @@ void mainboard_config_rcba(void); #define EHCI_USB_CMD_RUN (1 << 0) #define EHCI_USB_CMD_PSE (1 << 4) #define EHCI_USB_CMD_ASE (1 << 5) -#define EHCI_PORTSC(port) (0x64 + (port * 4)) +#define EHCI_PORTSC(port) (0x64 + (port) * 4) #define EHCI_PORTSC_ENABLED (1 << 2) #define EHCI_PORTSC_SUSPEND (1 << 7) @@ -267,7 +267,7 @@ void mainboard_config_rcba(void); #define XHCI_USB3PDO 0xe8 /* XHCI Memory Registers */ -#define XHCI_USB3_PORTSC(port) ((pch_is_lp() ? 0x510 : 0x570) + (port * 0x10)) +#define XHCI_USB3_PORTSC(port) ((pch_is_lp() ? 0x510 : 0x570) + ((port) * 0x10)) #define XHCI_USB3_PORTSC_CHST (0x7f << 17) #define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */ #define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */ @@ -335,7 +335,7 @@ void mainboard_config_rcba(void); #define SIO_REG_PPR_GEN 0x808 #define SIO_REG_PPR_GEN_LTR_MODE_MASK (1 << 2) #define SIO_REG_PPR_GEN_VOLTAGE_MASK (1 << 3) -#define SIO_REG_PPR_GEN_VOLTAGE(x) ((x & 1) << 3) +#define SIO_REG_PPR_GEN_VOLTAGE(x) (((x) & 1) << 3) #define SIO_REG_AUTO_LTR 0x814 #define SIO_REG_SDIO_PPR_GEN 0x1008 @@ -492,7 +492,7 @@ void mainboard_config_rcba(void); #define PCH_DISABLE_EHCI2 (1 << 13) #define PCH_DISABLE_LPC (1 << 14) #define PCH_DISABLE_EHCI1 (1 << 15) -#define PCH_DISABLE_PCIE(x) (1 << (16 + x)) +#define PCH_DISABLE_PCIE(x) (1 << (16 + (x))) #define PCH_DISABLE_THERMAL (1 << 24) #define PCH_DISABLE_SATA2 (1 << 25) #define PCH_DISABLE_XHCI (1 << 27) @@ -594,9 +594,9 @@ void mainboard_config_rcba(void); */ #define SPIBAR_OFFSET 0x3800 -#define SPIBAR8(x) RCBA8(x + SPIBAR_OFFSET) -#define SPIBAR16(x) RCBA16(x + SPIBAR_OFFSET) -#define SPIBAR32(x) RCBA32(x + SPIBAR_OFFSET) +#define SPIBAR8(x) RCBA8((x) + SPIBAR_OFFSET) +#define SPIBAR16(x) RCBA16((x) + SPIBAR_OFFSET) +#define SPIBAR32(x) RCBA32((x) + SPIBAR_OFFSET) /* Reigsters within the SPIBAR */ #define SSFC 0x91 @@ -609,13 +609,13 @@ void mainboard_config_rcba(void); #define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ #define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ #define SPIBAR_HSFC 0x3806 /* SPI hardware sequence control */ -#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) +#define SPIBAR_HSFC_BYTE_COUNT(c) ((((c) - 1) & 0x3f) << 8) #define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ #define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ #define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ #define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ #define SPIBAR_FADDR 0x3808 /* SPI flash address */ -#define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */ +#define SPIBAR_FDATA(n) (0x3810 + (4 * (n))) /* SPI flash data */ #endif /* __ACPI__ */ #endif /* SOUTHBRIDGE_INTEL_LYNXPOINT_PCH_H */ |