summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/ibexpeak/smbus.h
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/ibexpeak/smbus.h')
-rw-r--r--src/southbridge/intel/ibexpeak/smbus.h244
1 files changed, 244 insertions, 0 deletions
diff --git a/src/southbridge/intel/ibexpeak/smbus.h b/src/southbridge/intel/ibexpeak/smbus.h
new file mode 100644
index 0000000000..d6e4ce50a6
--- /dev/null
+++ b/src/southbridge/intel/ibexpeak/smbus.h
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/smbus_def.h>
+#include "pch.h"
+
+static void smbus_delay(void)
+{
+ inb(0x80);
+}
+
+static int smbus_wait_until_ready(u16 smbus_base)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_base + SMBHSTSTAT);
+ } while (byte & 1);
+ return loops ? 0 : -1;
+}
+
+static int smbus_wait_until_done(u16 smbus_base)
+{
+ unsigned loops = SMBUS_TIMEOUT;
+ unsigned char byte;
+ do {
+ smbus_delay();
+ if (--loops == 0)
+ break;
+ byte = inb(smbus_base + SMBHSTSTAT);
+ } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
+ return loops ? 0 : -1;
+}
+
+static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
+{
+ unsigned char global_status_register;
+ unsigned char byte;
+
+ if (smbus_wait_until_ready(smbus_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+ /* Setup transaction */
+ /* Disable interrupts */
+ outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
+ /* Set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
+ /* Set the command/address... */
+ outb(address & 0xff, smbus_base + SMBHSTCMD);
+ /* Set up for a byte data read */
+ outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
+ (smbus_base + SMBHSTCTL));
+ /* Clear any lingering errors, so the transaction will run */
+ outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
+
+ /* Clear the data byte... */
+ outb(0, smbus_base + SMBHSTDAT0);
+
+ /* Start the command */
+ outb((inb(smbus_base + SMBHSTCTL) | 0x40),
+ smbus_base + SMBHSTCTL);
+
+ /* Poll for transaction completion */
+ if (smbus_wait_until_done(smbus_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+
+ global_status_register = inb(smbus_base + SMBHSTSTAT);
+
+ /* Ignore the "In Use" status... */
+ global_status_register &= ~(3 << 5);
+
+ /* Read results of transaction */
+ byte = inb(smbus_base + SMBHSTDAT0);
+ if (global_status_register != (1 << 1)) {
+ return SMBUS_ERROR;
+ }
+ return byte;
+}
+
+#ifdef __PRE_RAM__
+
+static int do_smbus_write_byte(unsigned smbus_base, unsigned device, unsigned address, unsigned data)
+{
+ unsigned char global_status_register;
+
+ if (smbus_wait_until_ready(smbus_base) < 0)
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+
+ /* Setup transaction */
+ /* Disable interrupts */
+ outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
+ /* Set the device I'm talking too */
+ outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
+ /* Set the command/address... */
+ outb(address & 0xff, smbus_base + SMBHSTCMD);
+ /* Set up for a byte data read */
+ outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
+ (smbus_base + SMBHSTCTL));
+ /* Clear any lingering errors, so the transaction will run */
+ outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
+
+ /* Clear the data byte... */
+ outb(data, smbus_base + SMBHSTDAT0);
+
+ /* Start the command */
+ outb((inb(smbus_base + SMBHSTCTL) | 0x40),
+ smbus_base + SMBHSTCTL);
+
+ /* Poll for transaction completion */
+ if (smbus_wait_until_done(smbus_base) < 0)
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+
+ global_status_register = inb(smbus_base + SMBHSTSTAT);
+
+ /* Ignore the "In Use" status... */
+ global_status_register &= ~(3 << 5);
+
+ /* Read results of transaction */
+ if (global_status_register != (1 << 1))
+ return SMBUS_ERROR;
+
+ return 0;
+}
+
+static int do_smbus_block_write(unsigned smbus_base, unsigned device,
+ unsigned cmd, unsigned bytes, const u8 *buf)
+{
+ u8 status;
+
+ if (smbus_wait_until_ready(smbus_base) < 0)
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+
+ /* Setup transaction */
+ /* Disable interrupts */
+ outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
+ /* Set the device I'm talking too */
+ outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
+ /* Set the command/address... */
+ outb(cmd & 0xff, smbus_base + SMBHSTCMD);
+ /* Set up for a block data write */
+ outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
+ (smbus_base + SMBHSTCTL));
+ /* Clear any lingering errors, so the transaction will run */
+ outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
+
+ /* set number of bytes to transfer */
+ outb(bytes, smbus_base + SMBHSTDAT0);
+
+ outb(*buf++, smbus_base + SMBBLKDAT);
+ bytes--;
+
+ /* Start the command */
+ outb((inb(smbus_base + SMBHSTCTL) | 0x40),
+ smbus_base + SMBHSTCTL);
+
+ while(!(inb(smbus_base + SMBHSTSTAT) & 1));
+ /* Poll for transaction completion */
+ do {
+ status = inb(smbus_base + SMBHSTSTAT);
+ if (status & ((1 << 4) | /* FAILED */
+ (1 << 3) | /* BUS ERR */
+ (1 << 2))) /* DEV ERR */
+ return SMBUS_ERROR;
+
+ if (status & 0x80) { /* Byte done */
+ outb(*buf++, smbus_base + SMBBLKDAT);
+ outb(status, smbus_base + SMBHSTSTAT);
+ }
+ } while(status & 0x01);
+
+ return 0;
+}
+
+static int do_smbus_block_read(unsigned smbus_base, unsigned device,
+ unsigned cmd, unsigned bytes, u8 *buf)
+{
+ u8 status;
+ int bytes_read = 0;
+ if (smbus_wait_until_ready(smbus_base) < 0)
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+
+ /* Setup transaction */
+ /* Disable interrupts */
+ outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
+ /* Set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
+ /* Set the command/address... */
+ outb(cmd & 0xff, smbus_base + SMBHSTCMD);
+ /* Set up for a block data read */
+ outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
+ (smbus_base + SMBHSTCTL));
+ /* Clear any lingering errors, so the transaction will run */
+ outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
+
+ /* Start the command */
+ outb((inb(smbus_base + SMBHSTCTL) | 0x40),
+ smbus_base + SMBHSTCTL);
+
+ while(!(inb(smbus_base + SMBHSTSTAT) & 1));
+ /* Poll for transaction completion */
+ do {
+ status = inb(smbus_base + SMBHSTSTAT);
+ if (status & ((1 << 4) | /* FAILED */
+ (1 << 3) | /* BUS ERR */
+ (1 << 2))) /* DEV ERR */
+ return SMBUS_ERROR;
+
+ if (status & 0x80) { /* Byte done */
+ *buf = inb(smbus_base + SMBBLKDAT);
+ buf++;
+ bytes_read++;
+ outb(status, smbus_base + SMBHSTSTAT);
+ if (--bytes == 1) {
+ /* indicate that next byte is the last one */
+ outb(inb(smbus_base + SMBHSTCTL) | 0x20,
+ smbus_base + SMBHSTCTL);
+ }
+ }
+ } while(status & 0x01);
+
+ return bytes_read;
+}
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 08:54:36 +0000