summaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801gx
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/i82801gx')
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_ac97.c8
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_azalia.c18
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_ide.c10
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_lpc.c42
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_pci.c8
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_pcie.c10
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_sata.c10
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smbus.c6
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smi.c146
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_smihandler.c186
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb.c4
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb_debug.c2
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c4
-rw-r--r--src/southbridge/intel/i82801gx/i82801gx_watchdog.c2
14 files changed, 228 insertions, 228 deletions
diff --git a/src/southbridge/intel/i82801gx/i82801gx_ac97.c b/src/southbridge/intel/i82801gx/i82801gx_ac97.c
index f1e410715b..602014bb2e 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_ac97.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_ac97.c
@@ -101,7 +101,7 @@ static int ac97_semaphore(void)
timeout--;
} while ((reg8 & 1) && timeout);
if (! timeout) {
- printk_debug("Timeout!\n");
+ printk(BIOS_DEBUG, "Timeout!\n");
}
return (!timeout);
@@ -123,7 +123,7 @@ static void ac97_audio_init(struct device *dev)
u32 reg32;
int i;
- printk_debug("Initializing AC'97 Audio.\n");
+ printk(BIOS_DEBUG, "Initializing AC'97 Audio.\n");
/* top 16 bits are zero, so don't read them */
nabmbar = pci_read_config16(dev, NABMBAR) & 0xfffe;
@@ -142,7 +142,7 @@ static void ac97_audio_init(struct device *dev)
reg32 = inl(nabmbar + GLOB_STA);
if ((reg32 & ((1 << 28) | (1 << 9) | (1 << 8))) == 0) {
/* Primary Codec not found */
- printk_debug("No primary codec. Disabling AC'97 Audio.\n");
+ printk(BIOS_DEBUG, "No primary codec. Disabling AC'97 Audio.\n");
return;
}
@@ -152,7 +152,7 @@ static void ac97_audio_init(struct device *dev)
outw(0x8000, nambar + MASTER_VOL);
ac97_semaphore();
if (inw(nambar + MASTER_VOL) != 0x8000) {
- printk_debug("Codec not programmable. Disabling AC'97 Audio.\n");
+ printk(BIOS_DEBUG, "Codec not programmable. Disabling AC'97 Audio.\n");
return;
}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_azalia.c b/src/southbridge/intel/i82801gx/i82801gx_azalia.c
index 60b7334c2c..a4cf14c4f9 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_azalia.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_azalia.c
@@ -86,7 +86,7 @@ no_codec:
/* Codec Not found */
/* Put HDA back in reset (BAR + 0x8) [0] */
set_bits(base + 0x08, 1, 0);
- printk_debug("Azalia: No codec!\n");
+ printk(BIOS_DEBUG, "Azalia: No codec!\n");
return 0;
}
@@ -170,7 +170,7 @@ static void codec_init(struct device *dev, u32 base, int addr)
u32 verb_size;
int i;
- printk_debug("Azalia: Initializing codec #%d\n", addr);
+ printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);
/* 1 */
if (wait_for_ready(base) == -1)
@@ -185,14 +185,14 @@ static void codec_init(struct device *dev, u32 base, int addr)
reg32 = read32(base + 0x64);
/* 2 */
- printk_debug("Azalia: codec viddid: %08x\n", reg32);
+ printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
verb_size = find_verb(dev, reg32, &verb);
if (!verb_size) {
- printk_debug("Azalia: No verb!\n");
+ printk(BIOS_DEBUG, "Azalia: No verb!\n");
return;
}
- printk_debug("Azalia: verb_size: %d\n", verb_size);
+ printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);
/* 3 */
for (i = 0; i < verb_size; i++) {
@@ -204,7 +204,7 @@ static void codec_init(struct device *dev, u32 base, int addr)
if (wait_for_valid(base) == -1)
return;
}
- printk_debug("Azalia: verb loaded.\n");
+ printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
}
static void codecs_init(struct device *dev, u32 base, u32 codec_mask)
@@ -275,7 +275,7 @@ static void azalia_init(struct device *dev)
pci_write_config8(dev, 0x40, reg8);
mdelay(1);
reg8 = pci_read_config8(dev, 0x40);
- printk_debug("Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97");
+ printk(BIOS_DEBUG, "Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97");
//
reg8 = pci_read_config8(dev, 0x40); // Audio Control
@@ -304,11 +304,11 @@ static void azalia_init(struct device *dev)
// NOTE this will break as soon as the Azalia get's a bar above
// 4G. Is there anything we can do about it?
base = (u32)res->base;
- printk_debug("Azalia: base = %08x\n", (u32)base);
+ printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);
codec_mask = codec_detect(base);
if (codec_mask) {
- printk_debug("Azalia: codec_mask = %02x\n", codec_mask);
+ printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
codecs_init(dev, base, codec_mask);
}
}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_ide.c b/src/southbridge/intel/i82801gx/i82801gx_ide.c
index 28a1c055ea..84b50d6535 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_ide.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_ide.c
@@ -35,9 +35,9 @@ static void ide_init(struct device *dev)
/* Get the chip configuration */
config_t *config = dev->chip_info;
- printk_debug("i82801gx_ide: initializing... ");
+ printk(BIOS_DEBUG, "i82801gx_ide: initializing... ");
if (config == NULL) {
- printk_err("\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n");
+ printk(BIOS_ERR, "\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n");
// Trying to set somewhat safe defaults instead of bailing out.
enable_primary = enable_secondary = 1;
} else {
@@ -61,7 +61,7 @@ static void ide_init(struct device *dev)
ideTimingConfig |= (3 << 8); // RCT = 1 clock
ideTimingConfig |= (1 << 1); // IE0
ideTimingConfig |= (1 << 0); // TIME0
- printk_debug("IDE0 ");
+ printk(BIOS_DEBUG, "IDE0 ");
}
pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig);
@@ -75,7 +75,7 @@ static void ide_init(struct device *dev)
ideTimingConfig |= (3 << 8); // RCT = 1 clock
ideTimingConfig |= (1 << 1); // IE0
ideTimingConfig |= (1 << 0); // TIME0
- printk_debug("IDE1 ");
+ printk(BIOS_DEBUG, "IDE1 ");
}
pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig);
@@ -92,7 +92,7 @@ static void ide_init(struct device *dev)
/* Interrupt Pin is set by D31IP.PIP */
pci_write_config32(dev, INTR_LN, 0xff); /* Int 15 */
- printk_debug("\n");
+ printk(BIOS_DEBUG, "\n");
}
static void ide_set_subsystem(device_t dev, unsigned vendor, unsigned device)
diff --git a/src/southbridge/intel/i82801gx/i82801gx_lpc.c b/src/southbridge/intel/i82801gx/i82801gx_lpc.c
index ccab5482c9..f0e48ec29e 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_lpc.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_lpc.c
@@ -52,16 +52,16 @@ static void i82801gx_enable_apic(struct device *dev)
*ioapic_index = 0;
reg32 = *ioapic_data;
- printk_debug("Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
+ printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f);
if (reg32 != (1 << 25))
die("APIC Error\n");
- printk_spew("Dumping IOAPIC registers\n");
+ printk(BIOS_SPEW, "Dumping IOAPIC registers\n");
for (i=0; i<3; i++) {
*ioapic_index = i;
- printk_spew(" reg 0x%04x:", i);
+ printk(BIOS_SPEW, " reg 0x%04x:", i);
reg32 = *ioapic_data;
- printk_spew(" 0x%08x\n", reg32);
+ printk(BIOS_SPEW, " 0x%08x\n", reg32);
}
*ioapic_index = 3; /* Select Boot Configuration register. */
@@ -213,7 +213,7 @@ static void i82801gx_power_options(device_t dev)
reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */
pci_write_config8(dev, GEN_PMCON_3, reg8);
- printk_info("Set power %s after power failure.\n", state);
+ printk(BIOS_INFO, "Set power %s after power failure.\n", state);
/* Set up NMI on errors. */
reg8 = inb(0x61);
@@ -227,10 +227,10 @@ static void i82801gx_power_options(device_t dev)
nmi_option = NMI_OFF;
get_option(&nmi_option, "nmi");
if (nmi_option) {
- printk_info ("NMI sources enabled.\n");
+ printk(BIOS_INFO, "NMI sources enabled.\n");
reg8 &= ~(1 << 7); /* Set NMI. */
} else {
- printk_info ("NMI sources disabled.\n");
+ printk(BIOS_INFO, "NMI sources disabled.\n");
reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */
}
outb(reg8, 0x70);
@@ -296,7 +296,7 @@ static void i82801gx_rtc_init(struct device *dev)
reg8 &= ~RTC_BATTERY_DEAD;
pci_write_config8(dev, GEN_PMCON_3, reg8);
}
- printk_debug("rtc_failed = 0x%x\n", rtc_failed);
+ printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed);
rtc_init(rtc_failed);
}
@@ -340,13 +340,13 @@ static void i82801gx_lock_smm(struct device *dev)
#endif
#if ENABLE_ACPI_MODE_IN_COREBOOT
- printk_debug("Enabling ACPI via APMC:\n");
+ printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n");
outb(0xe1, 0xb2); // Enable ACPI mode
- printk_debug("done.\n");
+ printk(BIOS_DEBUG, "done.\n");
#else
- printk_debug("Disabling ACPI via APMC:\n");
+ printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n");
outb(0x1e, 0xb2); // Disable ACPI mode
- printk_debug("done.\n");
+ printk(BIOS_DEBUG, "done.\n");
#endif
/* Don't allow evil boot loaders, kernels, or
* userspace applications to deceive us:
@@ -355,29 +355,29 @@ static void i82801gx_lock_smm(struct device *dev)
#if TEST_SMM_FLASH_LOCKDOWN
/* Now try this: */
- printk_debug("Locking BIOS to RO... ");
+ printk(BIOS_DEBUG, "Locking BIOS to RO... ");
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
- printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
(reg8&1)?"rw":"ro");
reg8 &= ~(1 << 0); /* clear BIOSWE */
pci_write_config8(dev, 0xdc, reg8);
reg8 |= (1 << 1); /* set BLE */
pci_write_config8(dev, 0xdc, reg8);
- printk_debug("ok.\n");
+ printk(BIOS_DEBUG, "ok.\n");
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
- printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
(reg8&1)?"rw":"ro");
- printk_debug("Writing:\n");
+ printk(BIOS_DEBUG, "Writing:\n");
*(volatile u8 *)0xfff00000 = 0x00;
- printk_debug("Testing:\n");
+ printk(BIOS_DEBUG, "Testing:\n");
reg8 |= (1 << 0); /* set BIOSWE */
pci_write_config8(dev, 0xdc, reg8);
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
- printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
+ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
(reg8&1)?"rw":"ro");
- printk_debug("Done.\n");
+ printk(BIOS_DEBUG, "Done.\n");
#endif
}
#endif
@@ -406,7 +406,7 @@ static void i82801gx_fixups(struct device *dev)
static void lpc_init(struct device *dev)
{
- printk_debug("i82801gx: lpc_init\n");
+ printk(BIOS_DEBUG, "i82801gx: lpc_init\n");
/* Set the value for PCI command register. */
pci_write_config16(dev, PCI_COMMAND, 0x000f);
diff --git a/src/southbridge/intel/i82801gx/i82801gx_pci.c b/src/southbridge/intel/i82801gx/i82801gx_pci.c
index d9057cb295..c4c22f0ae8 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_pci.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_pci.c
@@ -71,7 +71,7 @@ static void ich_pci_dev_enable_resources(struct device *dev)
/* Set the subsystem vendor and device id for mainboard devices */
ops = ops_pci(dev);
if (dev->on_mainboard && ops && ops->set_subsystem) {
- printk_debug("%s subsystem <- %02x/%02x\n",
+ printk(BIOS_DEBUG, "%s subsystem <- %02x/%02x\n",
dev_path(dev),
CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
@@ -87,10 +87,10 @@ static void ich_pci_dev_enable_resources(struct device *dev)
* this will cause the ROM and APICs not being visible
* anymore.
*/
- printk_debug("%s cmd <- %02x\n", dev_path(dev), command);
+ printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command);
pci_write_config16(dev, PCI_COMMAND, command);
#else
- printk_debug("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
+ printk(BIOS_DEBUG, "%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
#endif
}
@@ -105,7 +105,7 @@ static void ich_pci_bus_enable_resources(struct device *dev)
ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
ctrl |= dev->link[0].bridge_ctrl;
ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* error check */
- printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
+ printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
/* This is the reason we need our own pci_bus_enable_resources */
diff --git a/src/southbridge/intel/i82801gx/i82801gx_pcie.c b/src/southbridge/intel/i82801gx/i82801gx_pcie.c
index b66a887063..d69bc6d07d 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_pcie.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_pcie.c
@@ -28,7 +28,7 @@ static void pci_init(struct device *dev)
u16 reg16;
u32 reg32;
- printk_debug("Initializing ICH7 PCIe bridge.\n");
+ printk(BIOS_DEBUG, "Initializing ICH7 PCIe bridge.\n");
/* Enable Bus Master */
reg32 = pci_read_config32(dev, PCI_COMMAND);
@@ -77,13 +77,13 @@ static void pci_init(struct device *dev)
#ifdef EVEN_MORE_DEBUG
reg32 = pci_read_config32(dev, 0x20);
- printk_spew(" MBL = 0x%08x\n", reg32);
+ printk(BIOS_SPEW, " MBL = 0x%08x\n", reg32);
reg32 = pci_read_config32(dev, 0x24);
- printk_spew(" PMBL = 0x%08x\n", reg32);
+ printk(BIOS_SPEW, " PMBL = 0x%08x\n", reg32);
reg32 = pci_read_config32(dev, 0x28);
- printk_spew(" PMBU32 = 0x%08x\n", reg32);
+ printk(BIOS_SPEW, " PMBU32 = 0x%08x\n", reg32);
reg32 = pci_read_config32(dev, 0x2c);
- printk_spew(" PMLU32 = 0x%08x\n", reg32);
+ printk(BIOS_SPEW, " PMLU32 = 0x%08x\n", reg32);
#endif
/* Clear errors in status registers */
diff --git a/src/southbridge/intel/i82801gx/i82801gx_sata.c b/src/southbridge/intel/i82801gx/i82801gx_sata.c
index ec477e1696..50cdb48131 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_sata.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_sata.c
@@ -33,10 +33,10 @@ static void sata_init(struct device *dev)
/* Get the chip configuration */
config_t *config = dev->chip_info;
- printk_debug("i82801gx_sata: initializing...\n");
+ printk(BIOS_DEBUG, "i82801gx_sata: initializing...\n");
if (config == NULL) {
- printk_err("i82801gx_sata: error: device not in Config.lb!\n");
+ printk(BIOS_ERR, "i82801gx_sata: error: device not in Config.lb!\n");
return;
}
@@ -46,7 +46,7 @@ static void sata_init(struct device *dev)
pci_write_config16(dev, PCI_COMMAND, 0x0007);
if (config->ide_legacy_combined) {
- printk_debug("SATA controller in combined mode.\n");
+ printk(BIOS_DEBUG, "SATA controller in combined mode.\n");
/* No AHCI: clear AHCI base */
pci_write_config32(dev, 0x24, 0x00000000);
/* And without AHCI BAR no memory decoding */
@@ -80,7 +80,7 @@ static void sata_init(struct device *dev)
/* SATA Initialization register */
pci_write_config32(dev, 0x94, 0x5a000180);
} else if(config->sata_ahci) {
- printk_debug("SATA controller in AHCI mode.\n");
+ printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n");
/* Allow both Legacy and Native mode */
pci_write_config8(dev, 0x09, 0x8f);
@@ -112,7 +112,7 @@ static void sata_init(struct device *dev)
/* SATA Initialization register */
pci_write_config32(dev, 0x94, 0x1a000180);
} else {
- printk_debug("SATA controller in plain mode.\n");
+ printk(BIOS_DEBUG, "SATA controller in plain mode.\n");
/* Set Sata Controller Mode. No Mapping(?) */
pci_write_config8(dev, 0x90, 0x00);
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smbus.c b/src/southbridge/intel/i82801gx/i82801gx_smbus.c
index 4306055d37..50c6d0f342 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_smbus.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_smbus.c
@@ -35,11 +35,11 @@ static void smbus_init(struct device *dev)
u32 smb_base;
smb_base = pci_read_config32(dev, SMB_BASE);
- printk_debug("Initializing SMBus device:\n");
- printk_debug(" Old SMBUS Base Address: 0x%04x\n", smb_base);
+ printk(BIOS_DEBUG, "Initializing SMBus device:\n");
+ printk(BIOS_DEBUG, " Old SMBUS Base Address: 0x%04x\n", smb_base);
pci_write_config32(dev, SMB_BASE, 0x00000401);
smb_base = pci_read_config32(dev, SMB_BASE);
- printk_debug(" New SMBUS Base Address: 0x%04x\n", smb_base);
+ printk(BIOS_DEBUG, " New SMBUS Base Address: 0x%04x\n", smb_base);
}
static int lsmbus_read_byte(device_t dev, u8 address)
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smi.c b/src/southbridge/intel/i82801gx/i82801gx_smi.c
index 0c70812412..3ba21b0dd1 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_smi.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_smi.c
@@ -63,16 +63,16 @@ static u16 reset_pm1_status(void)
static void dump_pm1_status(u16 pm1_sts)
{
- printk_debug("PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk_debug("WAK ");
- if (pm1_sts & (1 << 14)) printk_debug("PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk_debug("PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk_debug("RTC ");
- if (pm1_sts & (1 << 8)) printk_debug("PWRBTN ");
- if (pm1_sts & (1 << 5)) printk_debug("GBL ");
- if (pm1_sts & (1 << 4)) printk_debug("BM ");
- if (pm1_sts & (1 << 0)) printk_debug("TMROF ");
- printk_debug("\n");
+ printk(BIOS_DEBUG, "PM1_STS: ");
+ if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
+ if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
+ if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
+ if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
+ if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
+ if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
+ if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
+ if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
+ printk(BIOS_DEBUG, "\n");
}
/**
@@ -92,28 +92,28 @@ static u32 reset_smi_status(void)
static void dump_smi_status(u32 smi_sts)
{
- printk_debug("SMI_STS: ");
- if (smi_sts & (1 << 26)) printk_debug("SPI ");
- if (smi_sts & (1 << 25)) printk_debug("EL_SMI ");
- if (smi_sts & (1 << 21)) printk_debug("MONITOR ");
- if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk_debug("PERIODIC ");
- if (smi_sts & (1 << 13)) printk_debug("TCO ");
- if (smi_sts & (1 << 12)) printk_debug("DEVMON ");
- if (smi_sts & (1 << 11)) printk_debug("MCSMI ");
- if (smi_sts & (1 << 10)) printk_debug("GPI ");
- if (smi_sts & (1 << 9)) printk_debug("GPE0 ");
- if (smi_sts & (1 << 8)) printk_debug("PM1 ");
- if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk_debug("APM ");
- if (smi_sts & (1 << 4)) printk_debug("SLP_SMI ");
- if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk_debug("BIOS ");
- printk_debug("\n");
+ printk(BIOS_DEBUG, "SMI_STS: ");
+ if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+ if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
+ if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+ if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+ if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+ if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+ if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+ if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+ if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+ if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+ if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+ if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+ if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+ if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
+ if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
+ if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+ if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
+ if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
+ if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+ if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
+ printk(BIOS_DEBUG, "\n");
}
@@ -135,25 +135,25 @@ static u32 reset_gpe0_status(void)
static void dump_gpe0_status(u32 gpe0_sts)
{
int i;
- printk_debug("GPE0_STS: ");
+ printk(BIOS_DEBUG, "GPE0_STS: ");
for (i=31; i<= 16; i--) {
- if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16));
+ if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
}
- if (gpe0_sts & (1 << 14)) printk_debug("USB4 ");
- if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk_debug("USB3 ");
- if (gpe0_sts & (1 << 11)) printk_debug("PME ");
- if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW ");
- if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk_debug("RI ");
- if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk_debug("AC97 ");
- if (gpe0_sts & (1 << 4)) printk_debug("USB2 ");
- if (gpe0_sts & (1 << 3)) printk_debug("USB1 ");
- if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG ");
- if (gpe0_sts & (1 << 0)) printk_debug("THRM ");
- printk_debug("\n");
+ if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+ if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+ if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+ if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+ if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
+ if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
+ if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
+ if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
+ if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
+ if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
+ if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
+ if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
+ if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG ");
+ if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
+ printk(BIOS_DEBUG, "\n");
}
@@ -175,11 +175,11 @@ static u16 reset_alt_gp_smi_status(void)
static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts)
{
int i;
- printk_debug("ALT_GP_SMI_STS: ");
+ printk(BIOS_DEBUG, "ALT_GP_SMI_STS: ");
for (i=15; i<= 0; i--) {
- if (alt_gp_smi_sts & (1 << i)) printk_debug("GPI%d ", (i-16));
+ if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16));
}
- printk_debug("\n");
+ printk(BIOS_DEBUG, "\n");
}
@@ -205,21 +205,21 @@ static u32 reset_tco_status(void)
static void dump_tco_status(u32 tco_sts)
{
- printk_debug("TCO_STS: ");
- if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk_debug("BOOT ");
- if (tco_sts & (1 << 17)) printk_debug("SECOND_TO ");
- if (tco_sts & (1 << 16)) printk_debug("INTRD_DET ");
- if (tco_sts & (1 << 12)) printk_debug("DMISERR ");
- if (tco_sts & (1 << 10)) printk_debug("DMISMI ");
- if (tco_sts & (1 << 9)) printk_debug("DMISCI ");
- if (tco_sts & (1 << 8)) printk_debug("BIOSWR ");
- if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk_debug("TIMEOUT ");
- if (tco_sts & (1 << 2)) printk_debug("TCO_INT ");
- if (tco_sts & (1 << 1)) printk_debug("SW_TCO ");
- if (tco_sts & (1 << 0)) printk_debug("NMI2SMI ");
- printk_debug("\n");
+ printk(BIOS_DEBUG, "TCO_STS: ");
+ if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+ if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+ if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+ if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+ if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+ if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+ if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
+ if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
+ if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+ if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
+ if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
+ if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
+ if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
+ printk(BIOS_DEBUG, "\n");
}
@@ -243,14 +243,14 @@ static void smm_relocate(void)
u32 smi_en;
u16 pm1_en;
- printk_debug("Initializing SMM handler...");
+ printk(BIOS_DEBUG, "Initializing SMM handler...");
pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc;
- printk_spew(" ... pmbase = 0x%04x\n", pmbase);
+ printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
smi_en = inl(pmbase + SMI_EN);
if (smi_en & APMC_EN) {
- printk_info("SMI# handler already enabled?\n");
+ printk(BIOS_INFO, "SMI# handler already enabled?\n");
return;
}
@@ -258,7 +258,7 @@ static void smm_relocate(void)
memcpy((void *)0x38000, &smm_relocation_start,
&smm_relocation_end - &smm_relocation_start);
- printk_debug("\n");
+ printk(BIOS_DEBUG, "\n");
dump_smi_status(reset_smi_status());
dump_pm1_status(reset_pm1_status());
dump_gpe0_status(reset_gpe0_status());
@@ -314,7 +314,7 @@ static void smm_relocate(void)
*/
/* raise an SMI interrupt */
- printk_spew(" ... raise SMI#\n");
+ printk(BIOS_SPEW, " ... raise SMI#\n");
outb(0x00, 0xb2);
}
@@ -349,7 +349,7 @@ void smm_lock(void)
* After running this function, only a full reset can
* make the SMM registers writable again.
*/
- printk_debug("Locking SMM.\n");
+ printk(BIOS_DEBUG, "Locking SMM.\n");
pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
D_LCK | G_SMRAME | C_BASE_SEG);
}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_smihandler.c b/src/southbridge/intel/i82801gx/i82801gx_smihandler.c
index 9cd0370cdc..b478dbaa90 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_smihandler.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_smihandler.c
@@ -76,18 +76,18 @@ static u16 reset_pm1_status(void)
static void dump_pm1_status(u16 pm1_sts)
{
- printk_spew("PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk_spew("WAK ");
- if (pm1_sts & (1 << 14)) printk_spew("PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk_spew("PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk_spew("RTC ");
- if (pm1_sts & (1 << 8)) printk_spew("PWRBTN ");
- if (pm1_sts & (1 << 5)) printk_spew("GBL ");
- if (pm1_sts & (1 << 4)) printk_spew("BM ");
- if (pm1_sts & (1 << 0)) printk_spew("TMROF ");
- printk_spew("\n");
+ printk(BIOS_SPEW, "PM1_STS: ");
+ if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK ");
+ if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK ");
+ if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR ");
+ if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC ");
+ if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN ");
+ if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL ");
+ if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM ");
+ if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF ");
+ printk(BIOS_SPEW, "\n");
int reg16 = inw(pmbase + PM1_EN);
- printk_spew("PM1_EN: %x\n", reg16);
+ printk(BIOS_SPEW, "PM1_EN: %x\n", reg16);
}
/**
@@ -107,28 +107,28 @@ static u32 reset_smi_status(void)
static void dump_smi_status(u32 smi_sts)
{
- printk_debug("SMI_STS: ");
- if (smi_sts & (1 << 26)) printk_debug("SPI ");
- if (smi_sts & (1 << 25)) printk_debug("EL_SMI ");
- if (smi_sts & (1 << 21)) printk_debug("MONITOR ");
- if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk_debug("PERIODIC ");
- if (smi_sts & (1 << 13)) printk_debug("TCO ");
- if (smi_sts & (1 << 12)) printk_debug("DEVMON ");
- if (smi_sts & (1 << 11)) printk_debug("MCSMI ");
- if (smi_sts & (1 << 10)) printk_debug("GPI ");
- if (smi_sts & (1 << 9)) printk_debug("GPE0 ");
- if (smi_sts & (1 << 8)) printk_debug("PM1 ");
- if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk_debug("APM ");
- if (smi_sts & (1 << 4)) printk_debug("SLP_SMI ");
- if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk_debug("BIOS ");
- printk_debug("\n");
+ printk(BIOS_DEBUG, "SMI_STS: ");
+ if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+ if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
+ if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+ if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+ if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+ if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+ if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+ if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+ if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+ if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+ if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+ if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+ if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+ if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
+ if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
+ if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+ if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
+ if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
+ if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+ if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
+ printk(BIOS_DEBUG, "\n");
}
@@ -150,25 +150,25 @@ static u32 reset_gpe0_status(void)
static void dump_gpe0_status(u32 gpe0_sts)
{
int i;
- printk_debug("GPE0_STS: ");
+ printk(BIOS_DEBUG, "GPE0_STS: ");
for (i=31; i<= 16; i--) {
- if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16));
+ if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
}
- if (gpe0_sts & (1 << 14)) printk_debug("USB4 ");
- if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk_debug("USB3 ");
- if (gpe0_sts & (1 << 11)) printk_debug("PME ");
- if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW ");
- if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk_debug("RI ");
- if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk_debug("AC97 ");
- if (gpe0_sts & (1 << 4)) printk_debug("USB2 ");
- if (gpe0_sts & (1 << 3)) printk_debug("USB1 ");
- if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG ");
- if (gpe0_sts & (1 << 0)) printk_debug("THRM ");
- printk_debug("\n");
+ if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+ if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+ if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+ if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+ if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
+ if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
+ if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
+ if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
+ if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
+ if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
+ if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
+ if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
+ if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG ");
+ if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
+ printk(BIOS_DEBUG, "\n");
}
@@ -193,21 +193,21 @@ static u32 reset_tco_status(void)
static void dump_tco_status(u32 tco_sts)
{
- printk_debug("TCO_STS: ");
- if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk_debug("BOOT ");
- if (tco_sts & (1 << 17)) printk_debug("SECOND_TO ");
- if (tco_sts & (1 << 16)) printk_debug("INTRD_DET ");
- if (tco_sts & (1 << 12)) printk_debug("DMISERR ");
- if (tco_sts & (1 << 10)) printk_debug("DMISMI ");
- if (tco_sts & (1 << 9)) printk_debug("DMISCI ");
- if (tco_sts & (1 << 8)) printk_debug("BIOSWR ");
- if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk_debug("TIMEOUT ");
- if (tco_sts & (1 << 2)) printk_debug("TCO_INT ");
- if (tco_sts & (1 << 1)) printk_debug("SW_TCO ");
- if (tco_sts & (1 << 0)) printk_debug("NMI2SMI ");
- printk_debug("\n");
+ printk(BIOS_DEBUG, "TCO_STS: ");
+ if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+ if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+ if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+ if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+ if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+ if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+ if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
+ if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
+ if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+ if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
+ if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
+ if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
+ if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
+ printk(BIOS_DEBUG, "\n");
}
/* We are using PCIe accesses for now
@@ -220,7 +220,7 @@ int southbridge_io_trap_handler(int smif)
{
switch (smif) {
case 0x32:
- printk_debug("OS Init\n");
+ printk(BIOS_DEBUG, "OS Init\n");
/* gnvs->smif:
* On success, the IO Trap Handler returns 0
* On failure, the IO Trap Handler returns a value != 0
@@ -299,23 +299,23 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat
/* Figure out SLP_TYP */
reg32 = inl(pmbase + PM1_CNT);
- printk_spew("SMI#: SLP = 0x%08x\n", reg32);
+ printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
slp_typ = (reg32 >> 10) & 7;
/* Next, do the deed.
*/
switch (slp_typ) {
- case 0: printk_debug("SMI#: Entering S0 (On)\n"); break;
- case 1: printk_debug("SMI#: Entering S1 (Assert STPCLK#)\n"); break;
+ case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break;
+ case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break;
case 5:
- printk_debug("SMI#: Entering S3 (Suspend-To-RAM)\n");
+ printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
/* Invalidate the cache before going to S3 */
wbinvd();
break;
- case 6: printk_debug("SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
+ case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
case 7:
- printk_debug("SMI#: Entering S5 (Soft Power off)\n");
+ printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
outl(0, pmbase + GPE0_EN);
@@ -333,7 +333,7 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat
/* also iterates over all bridges on bus 0 */
busmaster_disable_on_bus(0);
break;
- default: printk_debug("SMI#: ERROR: SLP_TYP reserved\n"); break;
+ default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break;
}
/* Write back to the SLP register to cause the originally intended
@@ -368,40 +368,40 @@ static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state
* some kind of race condition in Linux
* and causes a kernel oops
*/
- printk_debug("C-state control\n");
+ printk(BIOS_DEBUG, "C-state control\n");
break;
case PST_CONTROL:
/* Calling this function seems to cause
* some kind of race condition in Linux
* and causes a kernel oops
*/
- printk_debug("P-state control\n");
+ printk(BIOS_DEBUG, "P-state control\n");
break;
case ACPI_DISABLE:
pmctrl = inl(pmbase + PM1_CNT);
pmctrl &= ~SCI_EN;
outl(pmctrl, pmbase + PM1_CNT);
- printk_debug("SMI#: ACPI disabled.\n");
+ printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
break;
case ACPI_ENABLE:
pmctrl = inl(pmbase + PM1_CNT);
pmctrl |= SCI_EN;
outl(pmctrl, pmbase + PM1_CNT);
- printk_debug("SMI#: ACPI enabled.\n");
+ printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
break;
case GNVS_UPDATE:
if (smm_initialized) {
- printk_debug("SMI#: SMM structures already initialized!\n");
+ printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n");
return;
}
gnvs = *(global_nvs_t **)0x500;
tcg = *(void **)0x504;
smi1 = *(void **)0x508;
smm_initialized = 1;
- printk_debug("SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1);
+ printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1);
break;
default:
- printk_debug("SMI#: Unknown function APM_CNT=%02x\n", reg8);
+ printk(BIOS_DEBUG, "SMI#: Unknown function APM_CNT=%02x\n", reg8);
}
}
@@ -445,7 +445,7 @@ static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_
mainboard_smi_gpi(reg16);
} else {
if (reg16)
- printk_debug("GPI (mask %04x)\n",reg16);
+ printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16);
}
}
@@ -459,7 +459,7 @@ static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_s
if ((reg32 & MCSMI_EN) == 0)
return;
- printk_debug("Microcontroller SMI.\n");
+ printk(BIOS_DEBUG, "Microcontroller SMI.\n");
}
@@ -490,12 +490,12 @@ static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_
* resolute answer would be to power down the
* box.
*/
- printk_debug("Switching back to RO\n");
+ printk(BIOS_DEBUG, "Switching back to RO\n");
pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
} /* No else for now? */
} else if (tco_sts & (1 << 3)) { /* TIMEOUT */
/* Handle TCO timeout */
- printk_debug("TCO Timeout.\n");
+ printk(BIOS_DEBUG, "TCO Timeout.\n");
} else if (!tco_sts) {
dump_tco_status(tco_sts);
}
@@ -511,7 +511,7 @@ static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *s
if ((reg32 & PERIODIC_EN) == 0)
return;
- printk_debug("Periodic SMI.\n");
+ printk(BIOS_DEBUG, "Periodic SMI.\n");
}
static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save)
@@ -544,7 +544,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st
/* IOTRAP(0) SMIC */
if (IOTRAP(0)) {
if (!(trap_cycle & (1 << 24))) { // It's a write
- printk_debug("SMI1 command\n");
+ printk(BIOS_DEBUG, "SMI1 command\n");
data = RCBA32(0x1e18);
data &= mask;
// if (smi1)
@@ -554,16 +554,16 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st
// Fall through to debug
}
- printk_debug(" trapped io address = 0x%x\n", trap_cycle & 0xfffc);
- for (i=0; i < 4; i++) if(IOTRAP(i)) printk_debug(" TRAP = %d\n", i);
- printk_debug(" AHBE = %x\n", (trap_cycle >> 16) & 0xf);
- printk_debug(" MASK = 0x%08x\n", mask);
- printk_debug(" read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
+ printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc);
+ for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i);
+ printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf);
+ printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask);
+ printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
if (!(trap_cycle & (1 << 24))) {
/* Write Cycle */
data = RCBA32(0x1e18);
- printk_debug(" iotrap written data = 0x%08x\n", data);
+ printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data);
}
#undef IOTRAP
}
@@ -635,7 +635,7 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav
if (southbridge_smi[i])
southbridge_smi[i](node, state_save);
else {
- printk_debug("SMI_STS[%d] occured, but no "
+ printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
"handler available.\n", i);
dump = 1;
}
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb.c b/src/southbridge/intel/i82801gx/i82801gx_usb.c
index 2803f9cdef..00fddf7c65 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_usb.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb.c
@@ -30,7 +30,7 @@ static void usb_init(struct device *dev)
u8 reg8;
/* USB Specification says the device must be Bus Master */
- printk_debug("UHCI: Setting up controller.. ");
+ printk(BIOS_DEBUG, "UHCI: Setting up controller.. ");
reg32 = pci_read_config32(dev, PCI_COMMAND);
pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
@@ -43,7 +43,7 @@ static void usb_init(struct device *dev)
reg8 |= (1 << 0);
pci_write_config8(dev, 0xca, reg8);
- printk_debug("done.\n");
+ printk(BIOS_DEBUG, "done.\n");
}
static void usb_set_subsystem(device_t dev, unsigned vendor, unsigned device)
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c
index 829ae6b819..ead7bdca7f 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c
@@ -30,7 +30,7 @@ void set_debug_port(unsigned port)
{
u32 dbgctl;
- printk_debug("Enabling OWNER_CNT\n");
+ printk(BIOS_DEBUG, "Enabling OWNER_CNT\n");
dbgctl = read32(EHCI_BAR + EHCI_DEBUG_OFFSET);
dbgctl |= (1 << 30);
write32(EHCI_BAR + EHCI_DEBUG_OFFSET, dbgctl);
diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
index 3d61cae9b6..1bc5fcaecb 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c
@@ -35,7 +35,7 @@ static void usb_ehci_init(struct device *dev)
u32 reg32;
u8 reg8;
- printk_debug("EHCI: Setting up controller.. ");
+ printk(BIOS_DEBUG, "EHCI: Setting up controller.. ");
reg32 = pci_read_config32(dev, PCI_COMMAND);
reg32 |= PCI_COMMAND_MASTER;
reg32 |= PCI_COMMAND_SERR;
@@ -61,7 +61,7 @@ static void usb_ehci_init(struct device *dev)
reg8 |= (1 << 4);
pci_write_config8(dev, 0x84, reg8);
- printk_debug("done.\n");
+ printk(BIOS_DEBUG, "done.\n");
}
static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
diff --git a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
index 38350d7ef2..436a9227cd 100644
--- a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
+++ b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c
@@ -49,5 +49,5 @@ void watchdog_off(void)
outw(0x0008, base + 0x04);
outw(0x0002, base + 0x06);
- printk_debug("ICH7 watchdog disabled\r\n");
+ printk(BIOS_DEBUG, "ICH7 watchdog disabled\r\n");
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 04:10:43 +0000