diff options
Diffstat (limited to 'src/southbridge/intel/i82801gx/smi.c')
| -rw-r--r-- | src/southbridge/intel/i82801gx/smi.c | 185 |
1 files changed, 0 insertions, 185 deletions
diff --git a/src/southbridge/intel/i82801gx/smi.c b/src/southbridge/intel/i82801gx/smi.c deleted file mode 100644 index 5618db7840..0000000000 --- a/src/southbridge/intel/i82801gx/smi.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#include <device/device.h> -#include <device/pci.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/acpi.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/smm.h> -#include <string.h> -#include <southbridge/intel/common/pmutil.h> -#include "i82801gx.h" - -/* I945 */ -#define SMRAM 0x9d -#define D_OPEN (1 << 6) -#define D_CLS (1 << 5) -#define D_LCK (1 << 4) -#define G_SMRAME (1 << 3) -#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) - -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = DEFAULT_PMBASE; - -extern uint8_t smm_relocation_start, smm_relocation_end; -static void *default_smm_area = NULL; - -static void smm_relocate(void) -{ - u32 smi_en; - u16 pm1_en; - - printk(BIOS_DEBUG, "Initializing SMM handler..."); - - pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc; - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); - - smi_en = inl(pmbase + SMI_EN); - if (smi_en & APMC_EN) { - printk(BIOS_INFO, "SMI# handler already enabled?\n"); - return; - } - - default_smm_area = backup_default_smm_area(); - - /* copy the SMM relocation code */ - memcpy((void *)0x38000, &smm_relocation_start, - &smm_relocation_end - &smm_relocation_start); - wbinvd(); - - printk(BIOS_DEBUG, "\n"); - dump_smi_status(reset_smi_status()); - dump_pm1_status(reset_pm1_status()); - dump_gpe0_status(reset_gpe0_status()); - dump_alt_gp_smi_status(reset_alt_gp_smi_status()); - dump_tco_status(reset_tco_status()); - - /* Enable SMI generation: - * - on TCO events - * - on APMC writes (io 0xb2) - * - on writes to SLP_EN (sleep states) - * - on writes to GBL_RLS (bios commands) - * No SMIs: - * - on microcontroller writes (io 0x62/0x66) - */ - - smi_en = 0; /* reset SMI enables */ - -#if 0 - smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN; -#endif - smi_en |= TCO_EN; - smi_en |= APMC_EN; -#if DEBUG_PERIODIC_SMIS - /* Set DEBUG_PERIODIC_SMIS in i82801gx.h to debug using - * periodic SMIs. - */ - smi_en |= PERIODIC_EN; -#endif - smi_en |= SLP_SMI_EN; - smi_en |= BIOS_EN; - - /* The following need to be on for SMIs to happen */ - smi_en |= EOS | GBL_SMI_EN; - - outl(smi_en, pmbase + SMI_EN); - - pm1_en = 0; - pm1_en |= PWRBTN_EN; - pm1_en |= GBL_EN; - outw(pm1_en, pmbase + PM1_EN); - - /** - * There are several methods of raising a controlled SMI# via - * software, among them: - * - Writes to io 0xb2 (APMC) - * - Writes to the Local Apic ICR with Delivery mode SMI. - * - * Using the local apic is a bit more tricky. According to - * AMD Family 11 Processor BKDG no destination shorthand must be - * used. - * The whole SMM initialization is quite a bit hardware specific, so - * I'm not too worried about the better of the methods at the moment - */ - - /* raise an SMI interrupt */ - printk(BIOS_SPEW, " ... raise SMI#\n"); - outb(0x00, 0xb2); -} - -static int smm_handler_copied = 0; - -static void smm_install(void) -{ - /* The first CPU running this gets to copy the SMM handler. But not all - * of them. - */ - if (smm_handler_copied) - return; - smm_handler_copied = 1; - - - /* if we're resuming from S3, the SMM code is already in place, - * so don't copy it again to keep the current SMM state */ - - if (!acpi_is_wakeup_s3()) { - /* enable the SMM memory window */ - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, - D_OPEN | G_SMRAME | C_BASE_SEG); - - /* copy the real SMM handler */ - memcpy((void *)0xa0000, _binary_smm_start, - _binary_smm_end - _binary_smm_start); - wbinvd(); - } - - /* close the SMM memory window and enable normal SMM */ - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, - G_SMRAME | C_BASE_SEG); -} - -void smm_init(void) -{ - /* Put SMM code to 0xa0000 */ - smm_install(); - - /* Put relocation code to 0x38000 and relocate SMBASE */ - smm_relocate(); - - /* We're done. Make sure SMIs can happen! */ - smi_set_eos(); -} - -void smm_init_completion(void) -{ - restore_default_smm_area(default_smm_area); -} - -void smm_lock(void) -{ - /* LOCK the SMM memory window and enable normal SMM. - * After running this function, only a full reset can - * make the SMM registers writable again. - */ - printk(BIOS_DEBUG, "Locking SMM.\n"); - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, - D_LCK | G_SMRAME | C_BASE_SEG); -} |