diff options
Diffstat (limited to 'src/southbridge/intel/i82801ex/lpc.c')
| -rw-r--r-- | src/southbridge/intel/i82801ex/lpc.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/src/southbridge/intel/i82801ex/lpc.c b/src/southbridge/intel/i82801ex/lpc.c index 630484a6de..7d01dbc4ba 100644 --- a/src/southbridge/intel/i82801ex/lpc.c +++ b/src/southbridge/intel/i82801ex/lpc.c @@ -78,8 +78,8 @@ static void i82801ex_pci_dma_cfg(device_t dev) #define LPC_EN 0xe6 static void i82801ex_enable_lpc(device_t dev) { - /* lpc i/f enable */ - pci_write_config8(dev, LPC_EN, 0x0d); + /* lpc i/f enable */ + pci_write_config8(dev, LPC_EN, 0x0d); } typedef struct southbridge_intel_i82801ex_config config_t; @@ -92,7 +92,7 @@ static void set_i82801ex_gpio_use_sel( gpio_use_sel = 0x1A003180; gpio_use_sel2 = 0x00000007; - for(i = 0; i < 64; i++) { + for (i = 0; i < 64; i++) { int val; switch(config->gpio[i] & ICH5R_GPIO_USE_MASK) { case ICH5R_GPIO_USE_AS_NATIVE: val = 0; break; @@ -121,7 +121,7 @@ static void set_i82801ex_gpio_direction( gpio_io_sel = 0x0000ffff; gpio_io_sel2 = 0x00000300; - for(i = 0; i < 64; i++) { + for (i = 0; i < 64; i++) { int val; switch(config->gpio[i] & ICH5R_GPIO_SEL_MASK) { case ICH5R_GPIO_SEL_OUTPUT: val = 0; break; @@ -152,7 +152,7 @@ static void set_i82801ex_gpio_level( gpio_lvl = 0x1b3f0000; gpio_blink = 0x00040000; gpio_lvl2 = 0x00030207; - for(i = 0; i < 64; i++) { + for (i = 0; i < 64; i++) { int val, blink; switch(config->gpio[i] & ICH5R_GPIO_LVL_MASK) { case ICH5R_GPIO_LVL_LOW: val = 0; blink = 0; break; @@ -184,7 +184,7 @@ static void set_i82801ex_gpio_inv( int i; gpio_inv = 0x00000000; - for(i = 0; i < 32; i++) { + for (i = 0; i < 32; i++) { int val; switch(config->gpio[i] & ICH5R_GPIO_INV_MASK) { case ICH5R_GPIO_INV_OFF: val = 0; break; @@ -205,10 +205,10 @@ static void i82801ex_pirq_init(device_t dev) /* Get the chip configuration */ config = dev->chip_info; - if(config->pirq_a_d) { + if (config->pirq_a_d) { pci_write_config32(dev, 0x60, config->pirq_a_d); } - if(config->pirq_e_h) { + if (config->pirq_e_h) { pci_write_config32(dev, 0x68, config->pirq_e_h); } } @@ -292,7 +292,7 @@ static void lpc_init(struct device *dev) /* Clear SATA to non raid */ pci_write_config8(dev, 0xae, 0x00); - get_option(&pwr_on, "power_on_after_fail"); + get_option(&pwr_on, "power_on_after_fail"); byte = pci_read_config8(dev, 0xa4); byte &= 0xfe; if (!pwr_on) { |