1 files changed, 0 insertions, 77 deletions
diff --git a/src/southbridge/intel/i82801er/i82801er.h b/src/southbridge/intel/i82801er/i82801er.h
deleted file mode 100644
index 56ba634cc5..0000000000
--- a/src/southbridge/intel/i82801er/i82801er.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef I82801ER_H
-#define I82801ER_H
-
-#include "chip.h"
-
-extern void i82801er_enable(device_t dev);
-
-/*
-000 = Non-combined. P0 is primary master. P1 is secondary master.
-001 = Non-combined. P0 is secondary master. P1 is primary master.
-100 = Combined. P0 is primary master. P1 is primary slave. IDE is secondary; Primary IDE channel
-disabled.
-101 = Combined. P0 is primary slave. P1 is primary master. IDE is secondary.
-110 = Combined. IDE is primary. P0 is secondary master. P1 is secondary slave; Secondary IDE
-channel disabled.
-111 = Combined. IDE is primary. P0 is secondary slave. P1 is secondary master.
-*/
-
-#define ICH5_SATA_ADDRESS_MAP 0
-
-
-#define PCI_DMA_CFG     0x90
-#define SERIRQ_CNTL     0x64
-#define GEN_CNTL        0xd0
-#define GEN_STS         0xd4
-#define RTC_CONF        0xd8
-#define GEN_PMCON_3     0xa4
-
-#define PCICMD          0x04
-#define PMBASE          0x40
-#define ACPI_CNTL       0x44
-#define BIOS_CNTL       0x4E
-#define GPIO_BASE       0x58
-#define GPIO_CNTL       0x5C
-#define PIRQA_ROUT      0x60
-#define PIRQE_ROUT      0x68
-#define COM_DEC         0xE0
-#define LPC_EN          0xE6
-#define FUNC_DIS        0xF2
-
-/* 1e f0 244e */
-
-#define CMD             0x04
-#define SBUS_NUM        0x19
-#define SUB_BUS_NUM     0x1A
-#define SMLT            0x1B
-#define IOBASE          0x1C
-#define IOLIM           0x1D
-#define MEMBASE         0x20
-#define MEMLIM          0x22
-#define CNF             0x50
-#define MTT             0x70
-#define PCI_MAST_STS    0x82
-
-#define RTC_FAILED      (1 <<2)
-
-
-#define SMBUS_IO_BASE 0x1000
-
-#define SMBHSTSTAT 0x0
-#define SMBHSTCTL  0x2
-#define SMBHSTCMD  0x3
-#define SMBXMITADD 0x4
-#define SMBHSTDAT0 0x5
-#define SMBHSTDAT1 0x6
-#define SMBBLKDAT  0x7
-#define SMBTRNSADD 0x9
-#define SMBSLVDATA 0xa
-#define SMLINK_PIN_CTL 0xe
-#define SMBUS_PIN_CTL  0xf 
-
-/* Between 1-10 seconds, We should never timeout normally 
- * Longer than this is just painful when a timeout condition occurs.
- */
-#define SMBUS_TIMEOUT (100*1000)
-
-#endif /* I82801ER_H */