diff options
Diffstat (limited to 'src/southbridge/intel/i82801ca/i82801ca_early_smbus.c')
-rw-r--r-- | src/southbridge/intel/i82801ca/i82801ca_early_smbus.c | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/src/southbridge/intel/i82801ca/i82801ca_early_smbus.c b/src/southbridge/intel/i82801ca/i82801ca_early_smbus.c new file mode 100644 index 0000000000..054af75089 --- /dev/null +++ b/src/southbridge/intel/i82801ca/i82801ca_early_smbus.c @@ -0,0 +1,138 @@ +#include <device/pci_ids.h> +#include "i82801ca.h"
+ +static void enable_smbus(void) +{ + device_t dev; + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_SMB), 0); + if (dev == PCI_DEV_INVALID) { + die("SMBUS controller not found\r\n"); + } + + print_debug("SMBus controller enabled\r\n"); + /* set smbus iobase */ + pci_write_config32(dev, SMB_BASE, SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); + /* Set smbus enable */ + pci_write_config8(dev, HOSTC, HST_EN); + /* Set smbus iospace enable */ + pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); + /* Disable interrupt generation */ + outb(0, SMBUS_IO_BASE + SMBHSTCTL); + /* clear any lingering errors, so the transaction will run */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); +} + + +static inline void smbus_delay(void) +{ + outb(0x80, 0x80); +} + +// See http://openbios.org/pipermail/linuxbios/2004-September/009077.html +// for a description of this function. +static int smbus_wait_until_active(void) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned char val; + smbus_delay(); + val = inb(SMBUS_IO_BASE + SMBHSTSTAT); + if ((val & 1)) { + break; + } + } while (--loops); + return loops ? 0 : -4; +} + +static int smbus_wait_until_ready(void) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned char val; + smbus_delay(); + val = inb(SMBUS_IO_BASE + SMBHSTSTAT); + // !HOST_BUSY? + if ((val & 1) == 0) { + break; + } + if(loops == (SMBUS_TIMEOUT / 2)) { + // Clear status flags + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), + SMBUS_IO_BASE + SMBHSTSTAT); + } + } while(--loops); + return loops?0:-2; +} + +static int smbus_wait_until_done(void) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned char val; + smbus_delay(); + + val = inb(SMBUS_IO_BASE + SMBHSTSTAT); + // !HOST_BUSY? + if ( (val & 1) == 0) { + break; + } + // BYTE_DONE or SUCCESS or error? + if ((val & ~((1<<6)|(1<<0)) ) != 0 ) { + break; + } + } while(--loops); + return loops?0:-3; +} + +static int smbus_read_byte(unsigned device, unsigned address) +{ + unsigned char global_control_register; + unsigned char global_status_register; + unsigned char byte; + + if (smbus_wait_until_ready() < 0) { + return -2; + } + + /* setup transaction */ + /* disable interrupts */ + outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xfe, SMBUS_IO_BASE + SMBHSTCTL); + /* set to read from the specified device */ + outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD); + /* set the command/address... */ + outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD); + /* set up for a byte data read */ + outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x2<<2), SMBUS_IO_BASE + SMBHSTCTL); + + /* clear any lingering errors, so the transaction will run */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + + /* clear the data byte...*/ + outb(0, SMBUS_IO_BASE + SMBHSTDAT0); + + /* start a byte read, with interrupts disabled */ + outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL); + /* poll for it to start */ + if (smbus_wait_until_active() < 0) { + return -4; + } + + /* poll for transaction completion */ + if (smbus_wait_until_done() < 0) { + return -3; + } + + global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT) & ~(1<<6); /* Ignore the In Use Status... */ + + /* read results of transaction */ + byte = inb(SMBUS_IO_BASE + SMBHSTDAT0); + + // SUCCESS? + if (global_status_register != 2) { + return -1; + } + return byte; +} |