1 files changed, 81 insertions, 0 deletions
diff --git a/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c
new file mode 100644
index 0000000000..b8ec9b7528
--- /dev/null
+++ b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c
@@ -0,0 +1,81 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2005 Tyan Computer
+ * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer)
+ * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/pci_ids.h>
+#include "i82801bx.h"
+#include "i82801bx_smbus.h"
+
+static void enable_smbus(void)
+{
+	device_t dev;
+	uint16_t device_id;
+
+	/* Set the SMBus device statically. */
+	dev = PCI_DEV(0x0, 0x1f, 0x3);
+
+	/* Check to make sure we've got the right device. */
+	device_id = pci_read_config16(dev, 0x2);
+
+	/* Clear bits 7-4 (the only bits that vary between models). */
+	device_id &= 0xff0f;
+
+	if (device_id != 0x2403) {
+		die("Device not found, Corey probably screwed up!");
+	}
+
+	/* Set SMBus I/O base. */
+	pci_write_config32(dev, SMB_BASE,
+			   SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+
+	/* Set SMBus enable. */
+	pci_write_config8(dev, HOSTC, HST_EN);
+
+	/* Set SMBus I/O space enable. */
+	pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+	/* Disable interrupt generation. */
+	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+	/* Clear any lingering errors, so transactions can run. */
+	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+
+	print_debug("SMBus controller enabled\r\n");
+}
+
+static inline int smbus_read_byte(unsigned device, unsigned address)
+{
+	return do_smbus_read_byte(device, address);
+}
+
+static void smbus_write_byte(unsigned device, unsigned address,
+			     unsigned char val)
+{
+	print_err("Unimplemented smbus_write_byte() called\r\n");
+	return;
+}
+
+static inline int smbus_write_block(unsigned device, unsigned length,
+				    unsigned cmd, unsigned data1,
+				    unsigned data2)
+{
+	return do_smbus_write_block(device, length, cmd, data1, data2);
+}