diff options
Diffstat (limited to 'src/southbridge/intel/i82801bx/i82801bx.h')
| -rw-r--r-- | src/southbridge/intel/i82801bx/i82801bx.h | 102 |
1 files changed, 0 insertions, 102 deletions
diff --git a/src/southbridge/intel/i82801bx/i82801bx.h b/src/southbridge/intel/i82801bx/i82801bx.h deleted file mode 100644 index 7a6497946b..0000000000 --- a/src/southbridge/intel/i82801bx/i82801bx.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SOUTHBRIDGE_INTEL_I82801BX_I82801BX_H -#define SOUTHBRIDGE_INTEL_I82801BX_I82801BX_H - -#if !defined(__PRE_RAM__) -#include "chip.h" -extern void i82801bx_enable(struct device *dev); -#endif - -#if defined(__PRE_RAM__) -void enable_smbus(void); -int smbus_read_byte(u8 device, u8 address); -#endif - -#define SMBUS_IO_BASE 0x0f00 -#define PMBASE_ADDR 0x0400 -#define GPIO_BASE_ADDR 0x0500 - -#define SECSTS 0x1e - -#define PCI_DMA_CFG 0x90 -#define SERIRQ_CNTL 0x64 -#define GEN_CNTL 0xd0 -#define GEN_STS 0xd4 -#define RTC_CONF 0xd8 -#define GEN_PMCON_3 0xa4 - -#define PMBASE 0x40 -#define ACPI_CNTL 0x44 -#define ACPI_EN (1 << 4) -#define BIOS_CNTL 0x4E -#define GPIO_BASE 0x58 /* GPIO Base Address Register */ -#define GPIO_CNTL 0x5C /* GPIO Control Register */ -#define GPIO_EN (1 << 4) - -#define PIRQA_ROUT 0x60 -#define PIRQB_ROUT 0x61 -#define PIRQC_ROUT 0x62 -#define PIRQD_ROUT 0x63 -#define PIRQE_ROUT 0x68 -#define PIRQF_ROUT 0x69 -#define PIRQG_ROUT 0x6A -#define PIRQH_ROUT 0x6B - -#define FUNC_DIS 0xF2 - -#define COM_DEC 0xE0 /* LPC I/F Comm. Port Decode Ranges */ -#define LPC_EN 0xE6 /* LPC IF Enables Register */ - -// TODO: FDC_DEC etc - -#define SBUS_NUM 0x19 -#define SUB_BUS_NUM 0x1A -#define SMLT 0x1B -#define IOBASE 0x1C -#define IOLIM 0x1D -#define MEMBASE 0x20 -#define MEMLIM 0x22 -#define CNF 0x50 -#define MTT 0x70 -#define PCI_MAST_STS 0x82 - -#define TCOBASE 0x60 /* TCO Base Address Register */ -#define TCO1_CNT 0x08 /* TCO1 Control Register */ - -/* GEN_PMCON_3 bits */ -#define RTC_BATTERY_DEAD (1 << 2) -#define RTC_POWER_FAILED (1 << 1) -#define SLEEP_AFTER_POWER_FAIL (1 << 0) - -/* IDE Timing registers (IDE_TIM) */ -#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ -#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ - -/* IDE_TIM bits */ -#define IDE_DECODE_ENABLE (1 << 15) - -/* SMbus */ -#define SMB_BASE 0x20 -#define HOSTC 0x40 - -/* HOSTC bits */ -#define I2C_EN (1 << 2) -#define SMB_SMI_EN (1 << 1) -#define HST_EN (1 << 0) - -#endif /* SOUTHBRIDGE_INTEL_I82801BX_I82801BX_H */ |