diff options
Diffstat (limited to 'src/southbridge/intel/i82801ax/i82801ax_smbus.h')
-rw-r--r-- | src/southbridge/intel/i82801ax/i82801ax_smbus.h | 115 |
1 files changed, 19 insertions, 96 deletions
diff --git a/src/southbridge/intel/i82801ax/i82801ax_smbus.h b/src/southbridge/intel/i82801ax/i82801ax_smbus.h index d3f49f9a71..312d0b7812 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_smbus.h +++ b/src/southbridge/intel/i82801ax/i82801ax_smbus.h @@ -25,7 +25,7 @@ static void smbus_delay(void) inb(0x80); } -static int smbus_wait_until_ready(void) +static int smbus_wait_until_ready(u16 smbus_io_base) { unsigned loops = SMBUS_TIMEOUT; unsigned char byte; @@ -33,12 +33,12 @@ static int smbus_wait_until_ready(void) smbus_delay(); if (--loops == 0) break; - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); + byte = inb(smbus_io_base + SMBHSTSTAT); } while (byte & 1); return loops ? 0 : -1; } -static int smbus_wait_until_done(void) +static int smbus_wait_until_done(u16 smbus_io_base) { unsigned loops = SMBUS_TIMEOUT; unsigned char byte; @@ -46,131 +46,54 @@ static int smbus_wait_until_done(void) smbus_delay(); if (--loops == 0) break; - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); + byte = inb(smbus_io_base + SMBHSTSTAT); } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0); return loops ? 0 : -1; } -static int smbus_wait_until_blk_done(void) -{ - unsigned loops = SMBUS_TIMEOUT; - unsigned char byte; - do { - smbus_delay(); - if (--loops == 0) - break; - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); - } while ((byte & (1 << 7)) == 0); - return loops ? 0 : -1; -} - -static int do_smbus_read_byte(unsigned device, unsigned address) +static int do_smbus_read_byte(u16 smbus_io_base, unsigned device, + unsigned address) { unsigned char global_status_register; unsigned char byte; - if (smbus_wait_until_ready() < 0) { + if (smbus_wait_until_ready(smbus_io_base) < 0) { return SMBUS_WAIT_UNTIL_READY_TIMEOUT; } /* Setup transaction */ /* Disable interrupts */ - outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); + outb(inb(smbus_io_base + SMBHSTCTL) & (~1), smbus_io_base + SMBHSTCTL); /* Set the device I'm talking too */ - outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD); + outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBXMITADD); /* Set the command/address... */ - outb(address & 0xff, SMBUS_IO_BASE + SMBHSTCMD); + outb(address & 0xff, smbus_io_base + SMBHSTCMD); /* Set up for a byte data read */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x2 << 2), - (SMBUS_IO_BASE + SMBHSTCTL)); + outb((inb(smbus_io_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (smbus_io_base + SMBHSTCTL)); /* Clear any lingering errors, so the transaction will run */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + outb(inb(smbus_io_base + SMBHSTSTAT), smbus_io_base + SMBHSTSTAT); /* Clear the data byte... */ - outb(0, SMBUS_IO_BASE + SMBHSTDAT0); + outb(0, smbus_io_base + SMBHSTDAT0); /* Start the command */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), - SMBUS_IO_BASE + SMBHSTCTL); + outb((inb(smbus_io_base + SMBHSTCTL) | 0x40), + smbus_io_base + SMBHSTCTL); /* Poll for transaction completion */ - if (smbus_wait_until_done() < 0) { + if (smbus_wait_until_done(smbus_io_base) < 0) { return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; } - global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT); + global_status_register = inb(smbus_io_base + SMBHSTSTAT); /* Ignore the "In Use" status... */ global_status_register &= ~(3 << 5); /* Read results of transaction */ - byte = inb(SMBUS_IO_BASE + SMBHSTDAT0); + byte = inb(smbus_io_base + SMBHSTDAT0); if (global_status_register != (1 << 1)) { return SMBUS_ERROR; } return byte; } - -static int do_smbus_write_block(unsigned device, unsigned length, unsigned cmd, - unsigned data1, unsigned data2) -{ - unsigned char byte; - unsigned char stat; - int i; - - print_err("Untested smbus_write_block called\n"); - - /* Clear the PM timeout flags, SECOND_TO_STS */ - outw(inw(PMBASE_ADDR + 0x66), PMBASE_ADDR + 0x66); - - if (smbus_wait_until_ready() < 0) { - return -2; - } - - /* Setup transaction */ - /* Obtain ownership */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - for (stat = 0; (stat & 0x40) == 0;) { - stat = inb(SMBUS_IO_BASE + SMBHSTSTAT); - } - /* Clear the done bit */ - outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT); - /* Disable interrupts */ - outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); - - /* Set the device I'm talking too */ - outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD); - - /* Set the command address */ - outb(cmd & 0xff, SMBUS_IO_BASE + SMBHSTCMD); - - /* Set the block length */ - outb(length & 0xff, SMBUS_IO_BASE + SMBHSTDAT0); - - /* Try sending out the first byte of data here */ - byte = (data1 >> (0)) & 0x0ff; - outb(byte, SMBUS_IO_BASE + SMBBLKDAT); - /* Issue a block write command */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x5 << 2) | 0x40, - SMBUS_IO_BASE + SMBHSTCTL); - - for (i = 0; i < length; i++) { - /* Poll for transaction completion */ - if (smbus_wait_until_blk_done() < 0) { - return -3; - } - - /* Load the next byte */ - if (i > 3) - byte = (data2 >> (i % 4)) & 0x0ff; - else - byte = (data1 >> (i)) & 0x0ff; - outb(byte, SMBUS_IO_BASE + SMBBLKDAT); - - /* Clear the done bit */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), - SMBUS_IO_BASE + SMBHSTSTAT); - } - - print_debug("SMBUS Block complete\n"); - return 0; -} |