1 files changed, 0 insertions, 112 deletions
diff --git a/src/southbridge/intel/i82371eb/smbus.h b/src/southbridge/intel/i82371eb/smbus.h
deleted file mode 100644
index de34504aff..0000000000
--- a/src/southbridge/intel/i82371eb/smbus.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#include <device/smbus_def.h>
-#include "i82371eb.h"
-
-#define SMBHST_STATUS 	0x0
-#define SMBHST_CTL    	0x2
-#define SMBHST_CMD  	0x3
-#define SMBHST_ADDR 	0x4
-#define SMBHST_DAT  	0x5
-
-#define SMBUS_TIMEOUT (100*1000*10)
-#define SMBUS_STATUS_MASK 0x1e
-#define SMBUS_ERROR_FLAG (1<<2)
-
-int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address);
-
-static inline void smbus_delay(void)
-{
-	outb(0x80, 0x80);
-	outb(0x80, 0x80);
-	outb(0x80, 0x80);
-	outb(0x80, 0x80);
-	outb(0x80, 0x80);
-	outb(0x80, 0x80);
-}
-
-static int smbus_wait_until_ready(unsigned smbus_io_base)
-{
-	unsigned long loops;
-	loops = SMBUS_TIMEOUT;
-	do {
-		unsigned char val;
-		smbus_delay();
-		val = inb(smbus_io_base + SMBHST_STATUS);
-		if ((val & 0x1) == 0) {
-			break;
-		}
-#if 0
-		if (loops == (SMBUS_TIMEOUT / 2)) {
-			outw(inw(smbus_io_base + SMBHST_STATUS),
-				smbus_io_base + SMBHST_STATUS);
-		}
-#endif
-	} while (--loops);
-	return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-}
-
-static int smbus_wait_until_done(unsigned smbus_io_base)
-{
-	unsigned long loops;
-	loops = SMBUS_TIMEOUT;
-	do {
-		unsigned short val;
-		smbus_delay();
-
-		val = inb(smbus_io_base + SMBHST_STATUS);
-		// Make sure the command is done
-		if ((val & 0x1) != 0) {
-			continue;
-		}
-		// Don't break out until one of the interrupt
-		// flags is set.
-		if (val & 0xfe) {
-			break;
-		}
-	} while (--loops);
-	return loops?0:SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
-}
-
-int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
-{
-	unsigned status_register;
-	unsigned byte;
-
-	if (smbus_wait_until_ready(smbus_io_base) < 0) {
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-	}
-
-	/* setup transaction */
-
-	/* clear any lingering errors, so the transaction will run */
-	outb(0x1e, smbus_io_base + SMBHST_STATUS);
-
-	/* set the device I'm talking too */
-	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHST_ADDR);
-
-	/* set the command/address... */
-	outb(address & 0xff, smbus_io_base + SMBHST_CMD);
-
-	/* clear the data word...*/
-	outb(0, smbus_io_base + SMBHST_DAT);
-
-	/* start a byte read with interrupts disabled */
-	outb( (0x02 << 2)|(1<<6), smbus_io_base + SMBHST_CTL);
-
-	/* poll for transaction completion */
-	if (smbus_wait_until_done(smbus_io_base) < 0) {
-		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
-	}
-
-	status_register = inw(smbus_io_base + SMBHST_STATUS);
-
-	/* read results of transaction */
-	byte = inw(smbus_io_base + SMBHST_DAT) & 0xff;
-
-	if (status_register & 0x04) {
-#if 0
- 		printk(BIOS_DEBUG, "Read fail %04x\n", status_register);
-#endif
-		return SMBUS_ERROR;
-	}
-	return byte;
-}