1 files changed, 43 insertions, 0 deletions
diff --git a/src/southbridge/intel/i3100/smbus.h b/src/southbridge/intel/i3100/smbus.h
index 7023a5b751..478974eff7 100644
--- a/src/southbridge/intel/i3100/smbus.h
+++ b/src/southbridge/intel/i3100/smbus.h
@@ -110,3 +110,46 @@ static int do_smbus_read_byte(u32 smbus_io_base, u16 device, u8 address)
 	}
 	return byte;
 }
+
+static  int do_smbus_write_byte(unsigned smbus_base, unsigned device, unsigned address, unsigned data)
+{
+	unsigned char global_status_register;
+
+	if (smbus_wait_until_ready(smbus_base) < 0)
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+
+	/* Setup transaction */
+	/* Disable interrupts */
+	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
+	/* Set the device I'm talking too */
+	outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
+	/* Set the command/address... */
+	outb(address & 0xff, smbus_base + SMBHSTCMD);
+	/* Set up for a byte data read */
+	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
+	     (smbus_base + SMBHSTCTL));
+	/* Clear any lingering errors, so the transaction will run */
+	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
+
+	/* Clear the data byte... */
+	outb(data, smbus_base + SMBHSTDAT0);
+
+	/* Start the command */
+	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
+	     smbus_base + SMBHSTCTL);
+
+	/* Poll for transaction completion */
+	if (smbus_wait_until_done(smbus_base) < 0)
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+
+	global_status_register = inb(smbus_base + SMBHSTSTAT);
+
+	/* Ignore the "In Use" status... */
+	global_status_register &= ~(3 << 5);
+
+	/* Read results of transaction */
+	if (global_status_register != (1 << 1))
+		return SMBUS_ERROR;
+
+	return 0;
+}