diff options
Diffstat (limited to 'src/southbridge/intel/fsp_rangeley')
36 files changed, 0 insertions, 5660 deletions
diff --git a/src/southbridge/intel/fsp_rangeley/Kconfig b/src/southbridge/intel/fsp_rangeley/Kconfig deleted file mode 100644 index 2c8ceacd9a..0000000000 --- a/src/southbridge/intel/fsp_rangeley/Kconfig +++ /dev/null @@ -1,63 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 Google Inc. -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - -config SOUTHBRIDGE_INTEL_FSP_RANGELEY - bool - -if SOUTHBRIDGE_INTEL_FSP_RANGELEY - -config SOUTH_BRIDGE_OPTIONS # dummy - def_bool y - select IOAPIC - select HAVE_HARD_RESET - select HAVE_USBDEBUG - select USE_WATCHDOG_ON_BOOT - select PCIEXP_ASPM - select PCIEXP_COMMON_CLOCK - select SPI_FLASH - select HAVE_INTEL_FIRMWARE - -config EHCI_BAR - hex - default 0xfef00000 - -config EHCI_DEBUG_OFFSET - hex - default 0xa0 - -config SERIRQ_CONTINUOUS_MODE - bool - default n - help - If you set this option to y, the serial IRQ machine will be - operated in continuous mode. - -config HPET_MIN_TICKS - hex - default 0x80 - -config IFD_BIN_PATH - string - depends on HAVE_IFD_BIN - default "../intel/mainboard/intel/rangeley" - help - The path and filename to the descriptor.bin file. - -endif diff --git a/src/southbridge/intel/fsp_rangeley/Makefile.inc b/src/southbridge/intel/fsp_rangeley/Makefile.inc deleted file mode 100644 index 2a66b90ec8..0000000000 --- a/src/southbridge/intel/fsp_rangeley/Makefile.inc +++ /dev/null @@ -1,38 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Google Inc. -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - -ifeq ($(CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY),y) - -ramstage-y += soc.c -ramstage-y += lpc.c -ramstage-y += sata.c -ramstage-y += reset.c -ramstage-y += watchdog.c -ramstage-y += spi.c -ramstage-y += smbus.c -ramstage-y += acpi.c - -romstage-y += early_usb.c early_smbus.c gpio.c reset.c early_spi.c early_init.c -romstage-y += romstage.c - -romstage-$(CONFIG_USBDEBUG) += usb_debug.c -ramstage-$(CONFIG_USBDEBUG) += usb_debug.c - -endif diff --git a/src/southbridge/intel/fsp_rangeley/acpi.c b/src/southbridge/intel/fsp_rangeley/acpi.c deleted file mode 100644 index 18e5a8a3b9..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <string.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <southbridge/intel/fsp_rangeley/soc.h> -#include <arch/io.h> - -#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) -#include <cpu/x86/smm.h> -#endif - -/** - * Fill in the FADT with generic values that can be overridden later. - */ - -typedef struct southbridge_intel_fsp_rangeley_config config_t; - -void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - struct device *lpcdev = dev_find_slot(SOC_LPC_DEVFN); - u16 pmbase = pci_read_config16(lpcdev, ABASE) & 0xfff0; - config_t *config = lpcdev->chip_info; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - - /* - * Reference section 5.2.9 Fixed ACPI Description Table (FADT) - * in the ACPI 3.0b specification. - */ - - /* FADT Header Structure */ - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = ACPI_FADT_REV_ACPI_3_0; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 1; - - /* ACPI Pointers */ - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - - fadt->model = 0; /* reserved, should be 0 ACPI 3.0 */ - fadt->preferred_pm_profile = config->fadt_pm_profile; /* unknown is default */ - - /* System Management */ - fadt->sci_int = 0x09; - fadt->smi_cmd = 0x00; /* disable SMM */ - fadt->acpi_enable = 0x00; /* unused if SMI_CMD = 0 */ - fadt->acpi_disable = 0x00; /* unused if SMI_CMD = 0 */ - - /* Enable ACPI */ - outl(inl(pmbase + PM1_CNT) | SCI_EN, pmbase + PM1_CNT); - - /* Power Control */ - fadt->s4bios_req = 0x00; - fadt->pstate_cnt = 0x00; - - /* Control Registers - Base Address */ - fadt->pm1a_evt_blk = pmbase + PM1_STS; - fadt->pm1b_evt_blk = 0x00; /* Not Used */ - fadt->pm1a_cnt_blk = pmbase + PM1_CNT; - fadt->pm1b_cnt_blk = 0x00; /* Not Used */ - fadt->pm2_cnt_blk = pmbase + PM2A_CNT_BLK; - fadt->pm_tmr_blk = pmbase + PM1_TMR; - fadt->gpe0_blk = pmbase + GPE0_STS; - fadt->gpe1_blk = 0x00; /* Not Used */ - - /* Control Registers - Length */ - fadt->pm1_evt_len = 4; /* 32 bits */ - fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */ - fadt->pm2_cnt_len = 1; /* 8 bits */ - fadt->pm_tmr_len = 4; /* 32 bits */ - fadt->gpe0_blk_len = 8; /* 64 bits */ - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED; - fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED; - fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */ - fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */ - fadt->duty_offset = 1; - fadt->duty_width = 0; - - /* RTC Registers */ - fadt->day_alrm = 0x0D; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = config->fadt_boot_arch; /* legacy free default */ - - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | ACPI_FADT_SLEEP_TYPE | - ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - - /* Reset Register */ - fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; - fadt->reset_reg.addrl = 0xCF9; - fadt->reset_reg.addrh = 0x00; - fadt->reset_value = 6; - - /* Reserved Bits */ - fadt->res3 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ - fadt->res4 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ - fadt->res5 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ - - /* Extended ACPI Pointers */ - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0x00; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0x00; - - /* PM1 Status & PM1 Enable */ - fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_pm1a_evt_blk.addrl = fadt->pm1a_evt_blk; - fadt->x_pm1a_evt_blk.addrh = 0x00; - - fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.access_size = 0; - fadt->x_pm1b_evt_blk.addrl = fadt->pm1b_evt_blk; - fadt->x_pm1b_evt_blk.addrh = 0x00; - - /* PM1 Control Registers */ - fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; - fadt->x_pm1a_cnt_blk.addrl = fadt->pm1a_cnt_blk; - fadt->x_pm1a_cnt_blk.addrh = 0x00; - - fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.access_size = 0; - fadt->x_pm1b_cnt_blk.addrl = fadt->pm1b_cnt_blk; - fadt->x_pm1b_cnt_blk.addrh = 0x00; - - /* PM2 Control Registers */ - fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; - fadt->x_pm2_cnt_blk.addrl = fadt->pm2_cnt_blk; - fadt->x_pm2_cnt_blk.addrh = 0x00; - - /* PM1 Timer Register */ - fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk; - fadt->x_pm_tmr_blk.addrh = 0x00; - - /* General-Purpose Event Registers */ - fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + EventEnable */ - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_gpe0_blk.addrl = fadt->gpe0_blk; - fadt->x_gpe0_blk.addrh = 0x00; - - fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.access_size = 0; - fadt->x_gpe1_blk.addrl = fadt->gpe1_blk; - fadt->x_gpe1_blk.addrh = 0x00; - - header->checksum = - acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl b/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl deleted file mode 100644 index 1cb12cfae1..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/globalnvs.asl +++ /dev/null @@ -1,185 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Global Variables */ - -Name(\PICM, 0) // IOAPIC/8259 -Name(\DSEN, 1) // Display Output Switching Enable - -/* Global ACPI memory region. This region is used for passing information - * between coreboot (aka "the system bios"), ACPI, and the SMI handler. - * Since we don't know where this will end up in memory at ACPI compile time, - * we have to fix it up in coreboot's ACPI creation phase. - */ - - -External(NVSA) -OperationRegion (GNVS, SystemMemory, NVSA, 0xf00) -Field (GNVS, ByteAcc, NoLock, Preserve) -{ - /* Miscellaneous */ - Offset (0x00), - OSYS, 16, // 0x00 - Operating System - SMIF, 8, // 0x02 - SMI function - PRM0, 8, // 0x03 - SMI function parameter - PRM1, 8, // 0x04 - SMI function parameter - SCIF, 8, // 0x05 - SCI function - PRM2, 8, // 0x06 - SCI function parameter - PRM3, 8, // 0x07 - SCI function parameter - LCKF, 8, // 0x08 - Global Lock function for EC - PRM4, 8, // 0x09 - Lock function parameter - PRM5, 8, // 0x0a - Lock function parameter - P80D, 32, // 0x0b - Debug port (IO 0x80) value - LIDS, 8, // 0x0f - LID state (open = 1) - PWRS, 8, // 0x10 - Power State (AC = 1) - /* Processor Identification */ - Offset (0x28), - APIC, 8, // 0x28 - APIC Enabled by coreboot - MPEN, 8, // 0x29 - Multi Processor Enable - PCP0, 8, // 0x2a - PDC CPU/CORE 0 - PCP1, 8, // 0x2b - PDC CPU/CORE 1 - PPCM, 8, // 0x2c - Max. PPC state - PCNT, 8, // 0x2d - Processor count - /* Super I/O & CMOS config */ - Offset (0x32), - NATP, 8, // 0x32 - - S5U0, 8, // 0x33 - Enable USB0 in S5 - S5U1, 8, // 0x34 - Enable USB1 in S5 - S3U0, 8, // 0x35 - Enable USB0 in S3 - S3U1, 8, // 0x36 - Enable USB1 in S3 - S33G, 8, // 0x37 - Enable 3G in S3 - CMEM, 32, // 0x38 - CBMEM TOC - /* Integrated Graphics Device */ - Offset (0x3c), - IGDS, 8, // 0x3c - IGD state (primary = 1) - TLST, 8, // 0x3d - Display Toggle List pointer - CADL, 8, // 0x3e - Currently Attached Devices List - PADL, 8, // 0x3f - Previously Attached Devices List - CSTE, 16, // 0x40 - Current display state - NSTE, 16, // 0x42 - Next display state - SSTE, 16, // 0x44 - Set display state - Offset (0x46), - NDID, 8, // 0x46 - Number of Device IDs - DID1, 32, // 0x47 - Device ID 1 - DID2, 32, // 0x4b - Device ID 2 - DID3, 32, // 0x4f - Device ID 3 - DID4, 32, // 0x53 - Device ID 4 - DID5, 32, // 0x57 - Device ID 5 - /* Backlight Control */ - Offset (0x64), - BLCS, 8, // 0x64 - Backlight control possible? - BRTL, 8, // 0x65 - Brightness Level - ODDS, 8, // 0x66 - /* Ambient Light Sensors */ - Offset (0x6e), - ALSE, 8, // 0x6e - ALS enable - ALAF, 8, // 0x6f - Ambient light adjustment factor - LLOW, 8, // 0x70 - LUX Low - LHIH, 8, // 0x71 - LUX High - /* EMA */ - Offset (0x78), - EMAE, 8, // 0x78 - EMA enable - EMAP, 16, // 0x79 - EMA pointer - EMAL, 16, // 0x7b - EMA length - /* MEF */ - Offset (0x82), - MEFE, 8, // 0x82 - MEF enable - /* TPM support */ - Offset (0x8c), - TPMP, 8, // 0x8c - TPM - TPME, 8, // 0x8d - TPM enable - /* SATA */ - Offset (0x96), - GTF0, 56, // 0x96 - GTF task file buffer for port 0 - GTF1, 56, // 0x9d - GTF task file buffer for port 1 - GTF2, 56, // 0xa4 - GTF task file buffer for port 2 - IDEM, 8, // 0xab - IDE mode (compatible / enhanced) - IDET, 8, // 0xac - IDE - /* IGD OpRegion */ - Offset (0xb4), - ASLB, 32, // 0xb4 - IGD OpRegion Base Address - IBTT, 8, // 0xb8 - IGD boot panel device - IPAT, 8, // 0xb9 - IGD panel type cmos option - ITVF, 8, // 0xba - IGD TV format cmos option - ITVM, 8, // 0xbb - IGD TV minor format option - IPSC, 8, // 0xbc - IGD panel scaling - IBLC, 8, // 0xbd - IGD BLC config - IBIA, 8, // 0xbe - IGD BIA config - ISSC, 8, // 0xbf - IGD SSC config - I409, 8, // 0xc0 - IGD 0409 modified settings - I509, 8, // 0xc1 - IGD 0509 modified settings - I609, 8, // 0xc2 - IGD 0609 modified settings - I709, 8, // 0xc3 - IGD 0709 modified settings - IDMM, 8, // 0xc4 - IGD Power conservation feature - IDMS, 8, // 0xc5 - IGD DVMT memory size - IF1E, 8, // 0xc6 - IGD function 1 enable - HVCO, 8, // 0xc7 - IGD HPLL VCO - NXD1, 32, // 0xc8 - IGD _DGS next DID1 - NXD2, 32, // 0xcc - IGD _DGS next DID2 - NXD3, 32, // 0xd0 - IGD _DGS next DID3 - NXD4, 32, // 0xd4 - IGD _DGS next DID4 - NXD5, 32, // 0xd8 - IGD _DGS next DID5 - NXD6, 32, // 0xdc - IGD _DGS next DID6 - NXD7, 32, // 0xe0 - IGD _DGS next DID7 - NXD8, 32, // 0xe4 - IGD _DGS next DID8 - - ISCI, 8, // 0xe8 - IGD SMI/SCI mode (0: SCI) - PAVP, 8, // 0xe9 - IGD PAVP data - Offset (0xeb), - OSCC, 8, // 0xeb - PCIe OSC control - NPCE, 8, // 0xec - native pcie support - PLFL, 8, // 0xed - platform flavor - BREV, 8, // 0xee - board revision - DPBM, 8, // 0xef - digital port b mode - DPCM, 8, // 0xf0 - digital port c mode - DPDM, 8, // 0xf1 - digital port d mode - ALFP, 8, // 0xf2 - active lfp - IMON, 8, // 0xf3 - current graphics turbo imon value - MMIO, 8, // 0xf4 - 64bit mmio support -} - -/* Set flag to enable USB charging in S3 */ -Method (S3UE) -{ - Store (One, \S3U0) - Store (One, \S3U1) -} - -/* Set flag to disable USB charging in S3 */ -Method (S3UD) -{ - Store (Zero, \S3U0) - Store (Zero, \S3U1) -} - -/* Set flag to enable USB charging in S5 */ -Method (S5UE) -{ - Store (One, \S5U0) - Store (One, \S5U1) -} - -/* Set flag to disable USB charging in S5 */ -Method (S5UD) -{ - Store (Zero, \S5U0) - Store (Zero, \S5U1) -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h b/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h deleted file mode 100644 index bf1f6c0bf2..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/irq_helper.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronics Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* - * This file intentionally gets included multiple times, to set pic and apic - * modes, so should not have guard statements added. - */ - -/* - * This file will use irqroute.asl and mainboard/irqroute.h - * to generate the ACPI IRQ routing for the mainboard being compiled. - * This method uses #defines in irqroute.h along with the macros contained - * in this file to generate an IRQ routing for each PCI device in the system. - */ -#undef PCI_DEV_PIRQ_ROUTES -#undef ACPI_DEV_IRQ -#undef PCI_DEV_PIRQ_ROUTE -#undef PIRQ_PIC_ROUTES -#undef PIRQ_PIC -#undef IRQROUTE_H - -#if defined(PIC_MODE) - -#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \ - Package() { ## dev_ ## ffff, pin_, \_SB.PCI0.LPCB.LNK ## pin_name_, 0 } - -#else /* defined(PIC_MODE) */ - -#define ACPI_DEV_IRQ(dev_, pin_, pin_name_) \ - Package() { ## dev_ ## ffff, pin_, 0, PIRQ ## pin_name_ ## _APIC_IRQ } - -#endif - -#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \ - ACPI_DEV_IRQ(dev_, 0, a_), \ - ACPI_DEV_IRQ(dev_, 1, b_), \ - ACPI_DEV_IRQ(dev_, 2, c_), \ - ACPI_DEV_IRQ(dev_, 3, d_) - -/* Empty PIRQ_PIC definition. */ -#define PIRQ_PIC(pirq_, pic_irq_) - -/* Include the mainboard irq route definition */ -#include "irqroute.h" diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl deleted file mode 100644 index acc03f0ceb..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/irqlinks.asl +++ /dev/null @@ -1,491 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -Device (LNKA) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 1) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTA) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLA, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLA, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTA - ShiftLeft(1, And(PRTA, 0x0f), IRQ0) - - Return (RTLA) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTA) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTA, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKB) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 2) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTB) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLB, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLB, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTB - ShiftLeft(1, And(PRTB, 0x0f), IRQ0) - - Return (RTLB) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTB) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTB, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKC) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 3) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTC) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLC, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLC, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTC - ShiftLeft(1, And(PRTC, 0x0f), IRQ0) - - Return (RTLC) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTC) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTC, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKD) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 4) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTD) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLD, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLD, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTD - ShiftLeft(1, And(PRTD, 0x0f), IRQ0) - - Return (RTLD) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTD) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTD, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKE) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 5) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTE) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLE, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLE, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTE - ShiftLeft(1, And(PRTE, 0x0f), IRQ0) - - Return (RTLE) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTE) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTE, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKF) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 6) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTF) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLF, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLF, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTF - ShiftLeft(1, And(PRTF, 0x0f), IRQ0) - - Return (RTLF) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTF) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTF, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKG) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 7) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTG) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLG, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLG, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTG - ShiftLeft(1, And(PRTG, 0x0f), IRQ0) - - Return (RTLG) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTG) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTG, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKH) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 8) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTH) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLH, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLH, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTH - ShiftLeft(1, And(PRTH, 0x0f), IRQ0) - - Return (RTLH) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTH) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTH, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl deleted file mode 100644 index 75eb76c423..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -// PCI Interrupt Routing -Method(_PRT) -{ - /* - * PICM comes from _PIC, which returns the following: - * 0 – PIC mode - * 1 – APIC mode - * 2 – SAPIC mode - */ - If (PICM) { - Return (Package() { - #undef PIC_MODE - #include "irq_helper.h" - PCI_DEV_PIRQ_ROUTES - }) - } Else { - Return (Package() { - #define PIC_MODE - #include "irq_helper.h" - PCI_DEV_PIRQ_ROUTES - }) - } -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl b/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl deleted file mode 100644 index fce5449744..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/lpc.asl +++ /dev/null @@ -1,230 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -// Intel LPC Bus Device - 0:1f.0 - -Device (LPCB) -{ - Name(_ADR, 0x001f0000) - - OperationRegion(LPC0, PCI_Config, 0x00, 0x100) - Field (LPC0, AnyAcc, NoLock, Preserve) - { - Offset (0x40), - PMBS, 16, // ABASE - Offset (0x60), // Interrupt Routing Registers - PRTA, 8, - PRTB, 8, - PRTC, 8, - PRTD, 8, - Offset (0x68), - PRTE, 8, - PRTF, 8, - PRTG, 8, - PRTH, 8, - - Offset (0x80), // IO Decode Ranges - IOD0, 8, - IOD1, 8, - - Offset (0xb8), // GPIO Routing Control - GR00, 2, - GR01, 2, - GR02, 2, - GR03, 2, - GR04, 2, - GR05, 2, - GR06, 2, - GR07, 2, - GR08, 2, - GR09, 2, - GR10, 2, - GR11, 2, - GR12, 2, - GR13, 2, - GR14, 2, - GR15, 2, - - Offset (0xf0), // RCBA - RCEN, 1, - , 13, - RCBA, 18, - } - - #include "irqlinks.asl" - - #include "acpi/ec.asl" - - Device (DMAC) // DMA Controller - { - Name(_HID, EISAID("PNP0200")) - Name(_CRS, ResourceTemplate() - { - IO (Decode16, 0x00, 0x00, 0x01, 0x20) - IO (Decode16, 0x81, 0x81, 0x01, 0x11) - IO (Decode16, 0x93, 0x93, 0x01, 0x0d) - IO (Decode16, 0xc0, 0xc0, 0x01, 0x20) - DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 } - }) - } - - Device (FWH) // Firmware Hub - { - Name (_HID, EISAID("INT0800")) - Name (_CRS, ResourceTemplate() - { - Memory32Fixed(ReadOnly, 0xff000000, 0x01000000) - }) - } - - Device (HPET) - { - Name (_HID, EISAID("PNP0103")) - Name (_CID, 0x010CD041) - - Name(BUF0, ResourceTemplate() - { - Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0) - }) - - Method (_STA, 0) // Device Status - { - If (HPTE) { - // Note: Ancient versions of Windows don't want - // to see the HPET in order to work right - If (LGreaterEqual(OSYS, 2001)) { - Return (0xf) // Enable and show device - } Else { - Return (0xb) // Enable and don't show device - } - } - - Return (0x0) // Not enabled, don't show. - } - - Method (_CRS, 0, Serialized) // Current resources - { - If (HPTE) { - CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0) - If (Lequal(HPAS, 1)) { - Store(0xfed01000, HPT0) - } - - If (Lequal(HPAS, 2)) { - Store(0xfed02000, HPT0) - } - - If (Lequal(HPAS, 3)) { - Store(0xfed03000, HPT0) - } - } - - Return (BUF0) - } - } - - Device(PIC) // 8259 Interrupt Controller - { - Name(_HID,EISAID("PNP0000")) - Name(_CRS, ResourceTemplate() - { - IO (Decode16, 0x20, 0x20, 0x01, 0x02) - IO (Decode16, 0x24, 0x24, 0x01, 0x02) - IO (Decode16, 0x28, 0x28, 0x01, 0x02) - IO (Decode16, 0x2c, 0x2c, 0x01, 0x02) - IO (Decode16, 0x30, 0x30, 0x01, 0x02) - IO (Decode16, 0x34, 0x34, 0x01, 0x02) - IO (Decode16, 0x38, 0x38, 0x01, 0x02) - IO (Decode16, 0x3c, 0x3c, 0x01, 0x02) - IO (Decode16, 0xa0, 0xa0, 0x01, 0x02) - IO (Decode16, 0xa4, 0xa4, 0x01, 0x02) - IO (Decode16, 0xa8, 0xa8, 0x01, 0x02) - IO (Decode16, 0xac, 0xac, 0x01, 0x02) - IO (Decode16, 0xb0, 0xb0, 0x01, 0x02) - IO (Decode16, 0xb4, 0xb4, 0x01, 0x02) - IO (Decode16, 0xb8, 0xb8, 0x01, 0x02) - IO (Decode16, 0xbc, 0xbc, 0x01, 0x02) - IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02) - IRQNoFlags () { 2 } - }) - } - - Device(MATH) // FPU - { - Name (_HID, EISAID("PNP0C04")) - Name (_CRS, ResourceTemplate() - { - IO (Decode16, 0xf0, 0xf0, 0x01, 0x01) - IRQNoFlags() { 13 } - }) - } - - Device(LDRC) // LPC device: Resource consumption - { - Name (_HID, EISAID("PNP0C02")) - Name (_UID, 2) - - Name (RBUF, ResourceTemplate() - { - IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO - IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO - IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status - IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post - IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI - //IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap - IO (Decode16, DEFAULT_ABASE, DEFAULT_ABASE, 0x1, 0x80) // ICH7-M ACPI - IO (Decode16, DEFAULT_GPIOBASE, DEFAULT_GPIOBASE, 0x1, 0x40) // ICH7-M GPIO - }) - - Method (_CRS, 0, NotSerialized) - { - Return (RBUF) - } - } - - Device (RTC) // Real Time Clock - { - Name (_HID, EISAID("PNP0B00")) - Name (_CRS, ResourceTemplate() - { - IO (Decode16, 0x70, 0x70, 1, 8) -// Disable as Windows doesn't like it, and systems don't seem to use it. -// IRQNoFlags() { 8 } - }) - } - - Device (TIMR) // Intel 8254 timer - { - Name(_HID, EISAID("PNP0100")) - Name(_CRS, ResourceTemplate() - { - IO (Decode16, 0x40, 0x40, 0x01, 0x04) - IO (Decode16, 0x50, 0x50, 0x10, 0x04) - IRQNoFlags() {0} - }) - } - - // Include mainboard's superio.asl file. - #include "acpi/superio.asl" -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl b/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl deleted file mode 100644 index 68f22b8591..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/pcie.asl +++ /dev/null @@ -1,169 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Intel 6/7 Series PCH PCIe support */ - -// PCI Express Ports - -Method (IRQM, 1, Serialized) { - - /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */ - Name (IQAA, Package() { - Package() { 0x0000ffff, 0, 0, 16 }, - Package() { 0x0000ffff, 1, 0, 17 }, - Package() { 0x0000ffff, 2, 0, 18 }, - Package() { 0x0000ffff, 3, 0, 19 } }) - Name (IQAP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } }) - - /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ - Name (IQBA, Package() { - Package() { 0x0000ffff, 0, 0, 17 }, - Package() { 0x0000ffff, 1, 0, 18 }, - Package() { 0x0000ffff, 2, 0, 19 }, - Package() { 0x0000ffff, 3, 0, 16 } }) - Name (IQBP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } }) - - /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ - Name (IQCA, Package() { - Package() { 0x0000ffff, 0, 0, 18 }, - Package() { 0x0000ffff, 1, 0, 19 }, - Package() { 0x0000ffff, 2, 0, 16 }, - Package() { 0x0000ffff, 3, 0, 17 } }) - Name (IQCP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } }) - - /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ - Name (IQDA, Package() { - Package() { 0x0000ffff, 0, 0, 19 }, - Package() { 0x0000ffff, 1, 0, 16 }, - Package() { 0x0000ffff, 2, 0, 17 }, - Package() { 0x0000ffff, 3, 0, 18 } }) - Name (IQDP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } }) - - Switch (ToInteger (Arg0)) { - /* PCIe Root Port 1 */ - Case (Package() { 1 }) { - If (PICM) { - Return (IQAA) - } Else { - Return (IQAP) - } - } - - /* PCIe Root Port 2 */ - Case (Package() { 2 }) { - If (PICM) { - Return (IQBA) - } Else { - Return (IQBP) - } - } - - /* PCIe Root Port 3 */ - Case (Package() { 3 }) { - If (PICM) { - Return (IQCA) - } Else { - Return (IQCP) - } - } - - /* PCIe Root Port 4 */ - Case (Package() { 4 }) { - If (PICM) { - Return (IQDA) - } Else { - Return (IQDP) - } - } - - Default { - If (PICM) { - Return (IQDA) - } Else { - Return (IQDP) - } - } - } -} - -Device (RP01) -{ - Name (_ADR, 0x00010000) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP02) -{ - Name (_ADR, 0x00020000) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP03) -{ - Name (_ADR, 0x00030000) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP04) -{ - Name (_ADR, 0x00040000) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl b/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl deleted file mode 100644 index 276227bb50..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/pcie_port.asl +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Included in each PCIe Root Port device */ - -OperationRegion (RPCS, PCI_Config, 0x00, 0xFF) -Field (RPCS, AnyAcc, NoLock, Preserve) -{ - Offset (0x4c), // Link Capabilities - , 24, - RPPN, 8, // Root Port Number -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/sata.asl b/src/southbridge/intel/fsp_rangeley/acpi/sata.asl deleted file mode 100644 index ec167159e0..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/sata.asl +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -// Intel SATA Controller 0:17.0 - -// Note: Some BIOSes put the S-ATA code into an SSDT to make it easily -// pluggable - -Device (SATA) -{ - Name (_ADR, 0x00170000) - - Device (PRID) - { - Name (_ADR, 0) - - // Get Timing Mode - Method (_GTM) - { - Name(PBUF, Buffer(20) { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00 }) - - CreateDwordField (PBUF, 0, PIO0) - CreateDwordField (PBUF, 4, DMA0) - CreateDwordField (PBUF, 8, PIO1) - CreateDwordField (PBUF, 12, DMA1) - CreateDwordField (PBUF, 16, FLAG) - - // TODO fill return structure - - Return (PBUF) - } - - // Set Timing Mode - Method (_STM, 3) - { - CreateDwordField (Arg0, 0, PIO0) - CreateDwordField (Arg0, 4, DMA0) - CreateDwordField (Arg0, 8, PIO1) - CreateDwordField (Arg0, 12, DMA1) - CreateDwordField (Arg0, 16, FLAG) - - // TODO: Do the deed - } - - Device (DSK0) - { - Name (_ADR, 0) - // TODO: _RMV ? - // TODO: _GTF ? - } - - Device (DSK1) - { - Name (_ADR, 1) - - // TODO: _RMV ? - // TODO: _GTF ? - } - - } -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl b/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl deleted file mode 100644 index aabb397144..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/sleepstates.asl +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -Name(\_S0, Package(){0x0,0x0,0x0,0x0}) - -/* - * S1 and S3 sleep states are not supported - * Name(\_S1, Package(){0x1,0x1,0x0,0x0}) - * Name(\_S3, Package(){0x5,0x5,0x0,0x0}) - */ - -Name(\_S4, Package(){0x6,0x6,0x0,0x0}) -Name(\_S5, Package(){0x7,0x7,0x0,0x0}) diff --git a/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl b/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl deleted file mode 100644 index efd323dea5..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/smbus.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -// Intel SMBus Controller 0:1f.3 - -Device (SBUS) -{ - Name (_ADR, 0x001f0003) - -#ifdef ENABLE_SMBUS_METHODS - OperationRegion (SMBP, PCI_Config, 0x00, 0x100) - Field(SMBP, DWordAcc, NoLock, Preserve) - { - Offset(0x40), - , 2, - I2CE, 1 - } - - OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20) - Field (SMBI, ByteAcc, NoLock, Preserve) - { - HSTS, 8, // Host Status - , 8, - HCNT, 8, // Host Control - HCMD, 8, // Host Command - TXSA, 8, // Transmit Slave Address - DAT0, 8, // Host Data 0 - DAT1, 8, // Host Data 1 - HBDB, 8, // Host Block Data Byte - PECK, 8, // Packet Error Check - RXSA, 8, // Receive Slave Address - RXDA, 16, // Receive Slave Data - AUXS, 8, // Auxiliary Status - AUXC, 8, // Auxiliary Control - SLPC, 8, // SMLink Pin Control - SBPC, 8, // SMBus Pin Control - SSTS, 8, // Slave Status - SCMD, 8, // Slave Command - NADR, 8, // Notify Device Address - NDLB, 8, // Notify Data Low Byte - NDLH, 8, // Notify Data High Byte - } - - // Kill all SMBus communication - Method (KILL, 0, Serialized) - { - Or (HCNT, 0x02, HCNT) // Send Kill - Or (HSTS, 0xff, HSTS) // Clean Status - } - - // Check if last operation completed - // return Failure = 0, Success = 1 - Method (CMPL, 0, Serialized) - { - Store (4000, Local0) // Timeout 200ms in 50us steps - While (Local0) { - If (And(HSTS, 0x02)) { // Completion Status? - Return (1) // Operation Completed - } Else { - Stall (50) - Decrement (Local0) - If (LEqual(Local0, 0)) { - KILL() - } - } - } - - Return (0) // Failure - } - - - // Wait for SMBus to become ready - Method (SRDY, 0, Serialized) - { - Store (200, Local0) // Timeout 200ms - While (Local0) { - If (And(HSTS, 0x40)) { // IN_USE? - Sleep(1) // Wait 1ms - Decrement(Local0) // timeout-- - If (LEqual(Local0, 0)) { - Return (1) - } - } Else { - Store (0, Local0) // We're ready - } - } - - Store (4000, Local0) // Timeout 200ms (50us * 4000) - While (Local0) { - If (And (HSTS, 0x01)) { // Host Busy? - Stall(50) // Wait 50us - Decrement(Local0) // timeout-- - If (LEqual(Local0, 0)) { - KILL() - } - } Else { - Return (0) // Success - } - } - - Return (1) // Failure - } - - // SMBus Send Byte - // Arg0: Address - // Arg1: Data - // Return: 1 = Success, 0=Failure - - Method (SSXB, 2, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0) - } - - // Send Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Arg0, TXSA) // Write Address - Store (Arg1, HCMD) // Write Data - - Store (0x48, HCNT) // Start + Byte Data Protocol - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (1) // Success - } - - Return (0) - } - - - // SMBus Receive Byte - // Arg0: Address - // Return: 0xffff = Failure, Data (8bit) = Success - - Method (SRXB, 2, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0xffff) - } - - // Receive Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Or (Arg0, 1), TXSA) // Write Address - - Store (0x44, HCNT) // Start - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (DAT0) // Success - } - - Return (0xffff) - } - - - // SMBus Write Byte - // Arg0: Address - // Arg1: Command - // Arg2: Data - // Return: 1 = Success, 0=Failure - - Method (SWRB, 3, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0) - } - - // Send Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Arg0, TXSA) // Write Address - Store (Arg1, HCMD) // Write Command - Store (Arg2, DAT0) // Write Data - - Store (0x48, HCNT) // Start + Byte Protocol - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (1) // Success - } - - Return (0) - } - - - // SMBus Read Byte - // Arg0: Address - // Arg1: Command - // Return: 0xffff = Failure, Data (8bit) = Success - - Method (SRDB, 2, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0xffff) - } - - // Receive Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Or (Arg0, 1), TXSA) // Write Address - Store (Arg1, HCMD) // Command - - Store (0x48, HCNT) // Start - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (DAT0) // Success - } - - Return (0xffff) - } -#endif -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/soc.asl b/src/southbridge/intel/fsp_rangeley/acpi/soc.asl deleted file mode 100644 index 77cd7ae488..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/soc.asl +++ /dev/null @@ -1,276 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Intel Rangeley support */ - -#include "../soc.h" - -Scope(\) -{ - // IO-Trap at 0x800. This is the ACPI->SMI communication interface. - - OperationRegion(IO_T, SystemIO, 0x800, 0x10) - Field(IO_T, ByteAcc, NoLock, Preserve) - { - Offset(0x8), - TRP0, 8 // IO-Trap at 0x808 - } - -#if IS_ENABLED(CONFIG_ACPI_INCLUDE_PMIO) - // PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l) - OperationRegion(PMIO, SystemIO, DEFAULT_ABASE, 0x80) - Field(PMIO, ByteAcc, NoLock, Preserve) - { - Offset(0x20), // GPE0_STS - , 16, - GS00, 1, // GPIO00 SCI/Wake Status - GS01, 1, // GPIO01 SCI/Wake Status - GS02, 1, // GPIO02 SCI/Wake Status - GS03, 1, // GPIO03 SCI/Wake Status - GS04, 1, // GPIO04 SCI/Wake Status - GS05, 1, // GPIO05 SCI/Wake Status - GS06, 1, // GPIO06 SCI/Wake Status - GS07, 1, // GPIO07 SCI/Wake Status - GS08, 1, // GPIO08 SCI/Wake Status - GS09, 1, // GPIO09 SCI/Wake Status - GS10, 1, // GPIO10 SCI/Wake Status - GS11, 1, // GPIO11 SCI/Wake Status - GS12, 1, // GPIO12 SCI/Wake Status - GS13, 1, // GPIO13 SCI/Wake Status - GS14, 1, // GPIO14 SCI/Wake Status - GS15, 1, // GPIO15 SCI/Wake Status - Offset(0x28), // GPE0_EN - , 16, - GE00, 1, // GPIO00 SCI/Wake Enable - GE01, 1, // GPIO01 SCI/Wake Enable - GE02, 1, // GPIO02 SCI/Wake Enable - GE03, 1, // GPIO03 SCI/Wake Enable - GE04, 1, // GPIO04 SCI/Wake Enable - GE05, 1, // GPIO05 SCI/Wake Enable - GE06, 1, // GPIO06 SCI/Wake Enable - GE07, 1, // GPIO07 SCI/Wake Enable - GE08, 1, // GPIO08 SCI/Wake Enable - GE09, 1, // GPIO09 SCI/Wake Enable - GE10, 1, // GPIO10 SCI/Wake Enable - GE11, 1, // GPIO11 SCI/Wake Enable - GE12, 1, // GPIO12 SCI/Wake Enable - GE13, 1, // GPIO13 SCI/Wake Enable - GE14, 1, // GPIO14 SCI/Wake Enable - GE15, 1, // GPIO15 SCI/Wake Enable - Offset(0x42), // General Purpose Control - , 1, // skip 1 bit - GPEC, 1, // SWGPE_CTRL - } -#endif - -#if IS_ENABLED(CONFIG_ACPI_INCLUDE_GPIO) - // GPIO IO mapped registers (0x1f.0 reg 0x48.l) - OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x6c) - Field(GPIO, ByteAcc, NoLock, Preserve) - { - Offset(0x00), // GPIO Use Select - GU00, 8, - GU01, 8, - GU02, 8, - GU03, 8, - Offset(0x04), // GPIO IO Select - GIO0, 8, - GIO1, 8, - GIO2, 8, - GIO3, 8, - Offset(0x0c), // GPIO Level - GL00, 1, - GP01, 1, - GP02, 1, - GP0e, 1, - GP04, 1, - GP05, 1, - GP06, 1, - GP07, 1, - GP08, 1, - GP09, 1, - GP10, 1, - GP11, 1, - GP12, 1, - GP13, 1, - GP14, 1, - GP15, 1, - GP16, 1, - GP17, 1, - GP18, 1, - GP19, 1, - GP20, 1, - GP21, 1, - GP22, 1, - GP23, 1, - GP24, 1, - GP25, 1, - GP26, 1, - GP27, 1, - GP28, 1, - GP29, 1, - GP30, 1, - GP31, 1, - Offset(0x18), // GPIO Blink - GB00, 8, - GB01, 8, - GB02, 8, - GB03, 8, - Offset(0x2c), // GPIO Invert - GIV0, 8, - GIV1, 8, - GIV2, 8, - GIV3, 8, - Offset(0x30), // GPIO Use Select 2 - GU04, 8, - GU05, 8, - GU06, 8, - GU07, 8, - Offset(0x34), // GPIO IO Select 2 - GIO4, 8, - GIO5, 8, - GIO6, 8, - GIO7, 8, - Offset(0x38), // GPIO Level 2 - GP32, 1, - GP33, 1, - GP34, 1, - GP35, 1, - GP36, 1, - GP37, 1, - GP38, 1, - GP39, 1, - GP40, 1, - GP41, 1, - GP42, 1, - GP43, 1, - GP44, 1, - GP45, 1, - GP46, 1, - GP47, 1, - GP48, 1, - GP49, 1, - GP50, 1, - GP51, 1, - GP52, 1, - GP53, 1, - GP54, 1, - GP55, 1, - GP56, 1, - GP57, 1, - GP58, 1, - GP59, 1, - GP60, 1, - GP61, 1, - GP62, 1, - GP63, 1, - Offset(0x40), // GPIO Use Select 3 - GU08, 8, - GU09, 4, - Offset(0x44), // GPIO IO Select 3 - GIO8, 8, - GIO9, 4, - Offset(0x48), // GPIO Level 3 - GP64, 1, - GP65, 1, - GP66, 1, - GP67, 1, - GP68, 1, - GP69, 1, - GP70, 1, - GP71, 1, - GP72, 1, - GP73, 1, - GP74, 1, - GP75, 1, - } -#endif - - // ICH7 Root Complex Register Block. Memory Mapped through RCBA) - OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000) - Field(RCRB, DWordAcc, Lock, Preserve) - { - Offset(0x0000), // Backbone - Offset(0x1000), // Chipset - Offset(0x3000), // Legacy Configuration Registers - Offset(0x3404), // High Performance Timer Configuration - HPAS, 2, // Address Select - , 5, - HPTE, 1, // Address Enable - Offset(0x3418), // FD (Function Disable) - , 1, // Reserved - PCID, 1, // PCI bridge disable - SA1D, 1, // SATA1 disable - SMBD, 1, // SMBUS disable - HDAD, 1, // Azalia disable - , 8, // Reserved - EH2D, 1, // EHCI #2 disable - LPBD, 1, // LPC bridge disable - EH1D, 1, // EHCI #1 disable - RP1D, 1, // Root Port 1 disable - RP2D, 1, // Root Port 2 disable - RP3D, 1, // Root Port 3 disable - RP4D, 1, // Root Port 4 disable - TTRD, 1, // Thermal sensor registers disable - SA2D, 1, // SATA2 disable - Offset(0x3428), // FD2 (Function Disable 2) - BDFD, 1, // Display BDF - ME1D, 1, // ME Interface 1 disable - ME2D, 1, // ME Interface 2 disable - IDRD, 1, // IDE redirect disable - KTCT, 1, // Keyboard Text redirect disable - } -} - -// PCI Express Ports 0:[1-4].0 -#include "pcie.asl" - -// USB 0:16.0 -#include "usb.asl" - -// LPC Bridge 0:1f.0 -#include "lpc.asl" - -// SATA 0:17.0 -#include "sata.asl" - -// SMBus 0:1f.3 -#include "smbus.asl" - -// IRQ routing for each PCI device -#include "irqroute.asl" - -Method (_OSC, 4) -{ - /* Check for proper GUID */ - If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) - { - /* Let OS control everything */ - Return (Arg3) - } - Else - { - /* Unrecognized UUID */ - CreateDWordField (Arg3, 0, CDW1) - Or (CDW1, 4, CDW1) - Return (Arg3) - } -} diff --git a/src/southbridge/intel/fsp_rangeley/acpi/usb.asl b/src/southbridge/intel/fsp_rangeley/acpi/usb.asl deleted file mode 100644 index 274a570f80..0000000000 --- a/src/southbridge/intel/fsp_rangeley/acpi/usb.asl +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Intel Rangeley USB support */ - -// EHCI Controller 0:16.0 - -Device (EHC1) -{ - Name(_ADR, 0x00160000) - - Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake - - // Leave USB ports on for to allow Wake from USB - - Method(_S3D,0) // Highest D State in S3 State - { - Return (2) - } - - Method(_S4D,0) // Highest D State in S4 State - { - Return (2) - } - - Device (HUB7) - { - Name (_ADR, 0x00000000) - - Device (PRT1) { Name (_ADR, 1) } // USB Port 0 - Device (PRT2) { Name (_ADR, 2) } // USB Port 1 - Device (PRT3) { Name (_ADR, 3) } // USB Port 2 - Device (PRT4) { Name (_ADR, 4) } // USB Port 3 - } -} diff --git a/src/southbridge/intel/fsp_rangeley/chip.h b/src/southbridge/intel/fsp_rangeley/chip.h deleted file mode 100644 index 790270023a..0000000000 --- a/src/southbridge/intel/fsp_rangeley/chip.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H -#define SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H - -#include <arch/acpi.h> - -struct southbridge_intel_fsp_rangeley_config { - - /** - * GPI Routing configuration - * - * Only the lower two bits have a meaning: - * 00: No effect - * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - * 10: SCI (if corresponding GPIO_EN bit is also set) - * 11: reserved - */ - uint8_t gpi0_routing; - uint8_t gpi1_routing; - uint8_t gpi2_routing; - uint8_t gpi3_routing; - uint8_t gpi4_routing; - uint8_t gpi5_routing; - uint8_t gpi6_routing; - uint8_t gpi7_routing; - uint8_t gpi8_routing; - uint8_t gpi9_routing; - uint8_t gpi10_routing; - uint8_t gpi11_routing; - uint8_t gpi12_routing; - uint8_t gpi13_routing; - uint8_t gpi14_routing; - uint8_t gpi15_routing; - - uint32_t gpe0_en; - uint16_t alt_gp_smi_en; - - /* IDE configuration */ - uint32_t ide_legacy_combined; - uint32_t sata_ahci; - uint8_t sata_port_map; - uint32_t sata_port0_gen3_tx; - uint32_t sata_port1_gen3_tx; - - uint32_t gen1_dec; - uint32_t gen2_dec; - uint32_t gen3_dec; - uint32_t gen4_dec; - - /* Enable linear PCIe Root Port function numbers starting at zero */ - uint8_t pcie_port_coalesce; - - /* Override PCIe ASPM */ - uint8_t pcie_aspm_f0; - uint8_t pcie_aspm_f1; - uint8_t pcie_aspm_f2; - uint8_t pcie_aspm_f3; - uint8_t pcie_aspm_f4; - uint8_t pcie_aspm_f5; - uint8_t pcie_aspm_f6; - uint8_t pcie_aspm_f7; - - /* ACPI configuration */ - uint8_t fadt_pm_profile; - uint16_t fadt_boot_arch; - -}; - -#endif /* SOUTHBRIDGE_INTEL_RANGELEY_CHIP_H */ diff --git a/src/southbridge/intel/fsp_rangeley/early_init.c b/src/southbridge/intel/fsp_rangeley/early_init.c deleted file mode 100644 index 448cbeb410..0000000000 --- a/src/southbridge/intel/fsp_rangeley/early_init.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 Google Inc - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <console/console.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <pc80/mc146818rtc.h> -#include <version.h> -#include <device/pci_def.h> -#include "pci_devs.h" -#include "soc.h" - -static void rangeley_setup_bars(void) -{ - /* Setting up Southbridge. */ - printk(BIOS_DEBUG, "Setting up static southbridge registers..."); - pci_write_config32(LPC_BDF, RCBA, (uintptr_t)DEFAULT_RCBA | RCBA_ENABLE); - pci_write_config32(LPC_BDF, ABASE, DEFAULT_ABASE | SET_BAR_ENABLE); - pci_write_config32(LPC_BDF, PBASE, DEFAULT_PBASE | SET_BAR_ENABLE); - printk(BIOS_DEBUG, " done.\n"); - - printk(BIOS_DEBUG, "Disabling Watchdog timer..."); - /* Disable the watchdog reboot and turn off the watchdog timer */ - write8((void *)(DEFAULT_PBASE + PMC_CFG), - read8((void *)(DEFAULT_PBASE + PMC_CFG)) | NO_REBOOT); // disable reboot on timer trigger - outw(DEFAULT_ABASE + TCO1_CNT, inw(DEFAULT_ABASE + TCO1_CNT) | - TCO_TMR_HALT); // disable watchdog timer - - printk(BIOS_DEBUG, " done.\n"); - -} - -static void reset_rtc(void) -{ - uint32_t pbase = pci_read_config32(LPC_BDF, PBASE) & - 0xfffffff0; - uint32_t gen_pmcon1 = read32((void *)(pbase + GEN_PMCON1)); - int rtc_failed = !!(gen_pmcon1 & RPS); - - if (rtc_failed) { - printk(BIOS_DEBUG, - "RTC Failure detected. Resetting Date to %s\n", - coreboot_dmi_date); - - /* Clear the power failure flag */ - write32((void *)(DEFAULT_PBASE + GEN_PMCON1), - gen_pmcon1 & ~RPS); - } - - cmos_init(rtc_failed); -} - -void rangeley_sb_early_initialization(void) -{ - /* Setup all BARs required for early PCIe and raminit */ - rangeley_setup_bars(); - - reset_rtc(); -} diff --git a/src/southbridge/intel/fsp_rangeley/early_smbus.c b/src/southbridge/intel/fsp_rangeley/early_smbus.c deleted file mode 100644 index f46f5e9812..0000000000 --- a/src/southbridge/intel/fsp_rangeley/early_smbus.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/pci_ids.h> -#include <device/pci_def.h> -#include "soc.h" -#include "smbus.h" - -void enable_smbus(void) -{ - device_t dev; - - /* Set the SMBus device statically. */ - dev = PCI_DEV(0x0, 0x1f, 0x3); - - /* Check to make sure we've got the right device. */ - if (pci_read_config16(dev, 0x0) != 0x8086) { - die("SMBus controller not found!"); - } - - /* Set SMBus I/O base. */ - pci_write_config32(dev, SMB_BASE, - SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); - - /* Set SMBus enable. */ - pci_write_config8(dev, HOSTC, HST_EN); - - /* Set SMBus I/O space enable. */ - pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); - - /* Disable interrupt generation. */ - outb(0, SMBUS_IO_BASE + SMBHSTCTL); - - /* Clear any lingering errors, so transactions can run. */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - printk(BIOS_DEBUG, "SMBus controller enabled.\n"); -} - -int smbus_read_byte(unsigned device, unsigned address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} diff --git a/src/southbridge/intel/fsp_rangeley/early_spi.c b/src/southbridge/intel/fsp_rangeley/early_spi.c deleted file mode 100644 index 26495e0152..0000000000 --- a/src/southbridge/intel/fsp_rangeley/early_spi.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Google Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/pci_ids.h> -#include <device/pci_def.h> -#include <delay.h> -#include "soc.h" - -#define SPI_DELAY 10 /* 10us */ -#define SPI_RETRY 200000 /* 2s */ - -static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) -{ - u32 *ptr32 = (u32*)buffer; - u32 i; - - /* Clear status bits */ - RCBA16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR | - SPIBAR_HSFS_FDONE; - - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { - printk(BIOS_ERR, "SPI ERROR: transaction in progress\n"); - return -1; - } - - /* Set flash address */ - RCBA32(SPIBAR_FADDR) = offset; - - /* Setup read transaction */ - RCBA16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) | - SPIBAR_HSFC_CYCLE_READ; - - /* Start transaction */ - RCBA16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO; - - /* Wait for completion */ - for (i = 0; i < SPI_RETRY; i++) { - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { - /* Cycle in progress, wait 1ms */ - udelay(SPI_DELAY); - continue; - } - - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { - printk(BIOS_ERR, "SPI ERROR: Access Error\n"); - return -1; - - } - - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { - printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n"); - return -1; - } - break; - } - - if (i >= SPI_RETRY) { - printk(BIOS_ERR, "SPI ERROR: Timeout\n"); - return -1; - } - - /* Read the data */ - for (i = 0; i < size; i+=sizeof(u32)) { - if (size-i >= 4) { - /* reading >= dword */ - *ptr32++ = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); - } else { - /* reading < dword */ - u8 j, *ptr8 = (u8*)ptr32; - u32 temp = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); - for (j = 0; j < (size-i); j++) { - *ptr8++ = temp & 0xff; - temp >>= 8; - } - } - } - - return size; -} - -int early_spi_read(u32 offset, u32 size, u8 *buffer) -{ - u32 current = 0; - - while (size > 0) { - u8 count = (size < 64) ? size : 64; - if (early_spi_read_block(offset + current, count, - buffer + current) < 0) - return -1; - size -= count; - current += count; - } - - return 0; -} diff --git a/src/southbridge/intel/fsp_rangeley/early_usb.c b/src/southbridge/intel/fsp_rangeley/early_usb.c deleted file mode 100644 index d5071c9abe..0000000000 --- a/src/southbridge/intel/fsp_rangeley/early_usb.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/pci_ids.h> -#include <device/pci_def.h> -#include "soc.h" - -#define SOC_EHCI1_TEMP_BAR0 0xe8000000 - -/* - * Setup USB controller MMIO BAR to prevent the - * reference code from resetting the controller. - * - * The BAR will be re-assigned during device - * enumeration so these are only temporary. - */ -void enable_usb_bar(void) -{ - device_t usb0 = SOC_EHCI1_DEV; - u32 cmd; - - /* USB Controller 0 */ - pci_write_config32(usb0, PCI_BASE_ADDRESS_0, - SOC_EHCI1_TEMP_BAR0); - cmd = pci_read_config32(usb0, PCI_COMMAND); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(usb0, PCI_COMMAND, cmd); -} diff --git a/src/southbridge/intel/fsp_rangeley/gpio.c b/src/southbridge/intel/fsp_rangeley/gpio.c deleted file mode 100644 index a0f6f0f394..0000000000 --- a/src/southbridge/intel/fsp_rangeley/gpio.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> - -#include "soc.h" -#include "gpio.h" - -#define MAX_GPIO_NUMBER 31 /* zero based */ - -void setup_soc_gpios(const struct soc_gpio_map *gpio) -{ - u16 gpiobase = pci_read_config16(SOC_LPC_DEV, GBASE) & ~0xf; - u32 *cfiobase = (u32 *)(pci_read_config32(SOC_LPC_DEV, IOBASE) & ~0xf); - u32 cfio_cnt = 0; - - - /* GPIO */ - if (gpio->core.level) - outl(*((u32*)gpio->core.level), gpiobase + GPIO_SC_GP_LVL); - if (gpio->core.mode) - outl(*((u32*)gpio->core.mode), gpiobase + GPIO_SC_USE_SEL); - if (gpio->core.direction) - outl(*((u32*)gpio->core.direction), gpiobase + GPIO_SC_IO_SEL); - if (gpio->core.tpe) - outl(*((u32*)gpio->core.tpe), gpiobase + GPIO_SC_TPE); - if (gpio->core.tne) - outl(*((u32*)gpio->core.tne), gpiobase + GPIO_SC_TNE); - if (gpio->core.ts) - outl(*((u32*)gpio->core.ts), gpiobase + GPIO_SC_TS); - - /* GPIO SUS Well Set 1 */ - if (gpio->sus.level) - outl(*((u32*)gpio->sus.level), gpiobase + GPIO_SUS_GP_LVL); - if (gpio->sus.mode) - outl(*((u32*)gpio->sus.mode), gpiobase + GPIO_SUS_USE_SEL); - if (gpio->sus.direction) - outl(*((u32*)gpio->sus.direction), gpiobase + GPIO_SUS_IO_SEL); - if (gpio->sus.tpe) - outl(*((u32*)gpio->sus.tpe), gpiobase + GPIO_SUS_TPE); - if (gpio->sus.tne) - outl(*((u32*)gpio->sus.tne), gpiobase + GPIO_SUS_TNE); - if (gpio->sus.ts) - outl(*((u32*)gpio->sus.ts), gpiobase + GPIO_SUS_TS); - if (gpio->sus.we) - outl(*((u32*)gpio->sus.we), gpiobase + GPIO_SUS_WE); - - /* GPIO PAD Settings */ - /* CFIO Core Well Set 1 */ - if ((gpio->core.cfio_init != NULL) || (gpio->core.cfio_entrynum != 0)) { - write32(cfiobase + (0x0700 / sizeof(u32)), (u32)0x01001002); - for(cfio_cnt = 0; cfio_cnt < gpio->core.cfio_entrynum; cfio_cnt++) { - if (!((u32)gpio->core.cfio_init[cfio_cnt].pad_conf_0)) - continue; - write32(cfiobase + ((CFIO_PAD_CONF0 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_conf_0); - write32(cfiobase + ((CFIO_PAD_CONF1 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_conf_1); - write32(cfiobase + ((CFIO_PAD_VAL + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_val); - write32(cfiobase + ((CFIO_PAD_DFT + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->core.cfio_init[cfio_cnt].pad_dft); - } - write32(cfiobase + (0x0700 / sizeof(u32)), (u32)0x01041002); - } - - /* CFIO SUS Well Set 1 */ - if ((gpio->sus.cfio_init != NULL) || (gpio->sus.cfio_entrynum != 0)) { - write32(cfiobase + (0x1700 / sizeof(u32)), (u32)0x01001002); - for(cfio_cnt = 0; cfio_cnt < gpio->sus.cfio_entrynum; cfio_cnt++) { - if (!((u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_0)) - continue; - write32(cfiobase + ((CFIO_PAD_CONF0 + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_0); - write32(cfiobase + ((CFIO_PAD_CONF1 + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_conf_1); - write32(cfiobase + ((CFIO_PAD_VAL + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_val); - write32(cfiobase + ((CFIO_PAD_DFT + 0x1000 + (16*cfio_cnt))/sizeof(u32)), (u32)gpio->sus.cfio_init[cfio_cnt].pad_dft); - } - write32(cfiobase + (0x1700 / sizeof(u32)), (u32)0x01041002); - } -} - -int get_gpio(int gpio_num) -{ - u16 gpio_base = pci_read_config16(SOC_LPC_DEV, GBASE) & ~0xf; - int bit; - - if (gpio_num > MAX_GPIO_NUMBER) - return 0; /* Ignore wrong GPIO numbers. */ - - bit = gpio_num % 32; - - return (inl(gpio_base + GPIO_SC_USE_SEL) >> bit) & 1; -} diff --git a/src/southbridge/intel/fsp_rangeley/gpio.h b/src/southbridge/intel/fsp_rangeley/gpio.h deleted file mode 100644 index 0ead65cb40..0000000000 --- a/src/southbridge/intel/fsp_rangeley/gpio.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef INTEL_RANGELEY_GPIO_H -#define INTEL_RANGELEY_GPIO_H - -#define GPIO_MODE_NATIVE 0 -#define GPIO_MODE_GPIO 1 -#define GPIO_MODE_NONE 1 - -#define GPIO_DIR_OUTPUT 0 -#define GPIO_DIR_INPUT 1 - -#define GPIO_LEVEL_LOW 0 -#define GPIO_LEVEL_HIGH 1 - -#define GPIO_TPE_DISABLE 0 -#define GPIO_TPE_ENABLE 1 - -#define GPIO_TNE_DISABLE 0 -#define GPIO_TNE_ENABLE 1 - -#define GPIO_TS_DISABLE 0 -#define GPIO_TS_ENABLE 1 - -#define GPIO_WE_DISABLE 0 -#define GPIO_WE_ENABLE 1 - -struct soc_gpio { - u32 gpio0 : 1; - u32 gpio1 : 1; - u32 gpio2 : 1; - u32 gpio3 : 1; - u32 gpio4 : 1; - u32 gpio5 : 1; - u32 gpio6 : 1; - u32 gpio7 : 1; - u32 gpio8 : 1; - u32 gpio9 : 1; - u32 gpio10 : 1; - u32 gpio11 : 1; - u32 gpio12 : 1; - u32 gpio13 : 1; - u32 gpio14 : 1; - u32 gpio15 : 1; - u32 gpio16 : 1; - u32 gpio17 : 1; - u32 gpio18 : 1; - u32 gpio19 : 1; - u32 gpio20 : 1; - u32 gpio21 : 1; - u32 gpio22 : 1; - u32 gpio23 : 1; - u32 gpio24 : 1; - u32 gpio25 : 1; - u32 gpio26 : 1; - u32 gpio27 : 1; - u32 gpio28 : 1; - u32 gpio29 : 1; - u32 gpio30 : 1; - u32 gpio31 : 1; -} __attribute__ ((packed)); - -struct soc_cfio { - u32 pad_conf_0; - u32 pad_conf_1; - u32 pad_val; - u32 pad_dft; -} __attribute__ ((packed)); - -struct soc_gpio_map { - /* GPIO core */ - struct { - const struct soc_gpio *mode; - const struct soc_gpio *direction; - const struct soc_gpio *level; - const struct soc_gpio *tpe; - const struct soc_gpio *tne; - const struct soc_gpio *ts; - const struct soc_cfio *cfio_init; - const u32 cfio_entrynum; - }core; - - /* GPIO SUS */ - struct { - const struct soc_gpio *mode; - const struct soc_gpio *direction; - const struct soc_gpio *level; - const struct soc_gpio *tpe; - const struct soc_gpio *tne; - const struct soc_gpio *ts; - const struct soc_gpio *we; - const struct soc_cfio *cfio_init; - const u32 cfio_entrynum; - }sus; - - -}; - -/* Configure GPIOs with mainboard provided settings */ -void setup_soc_gpios(const struct soc_gpio_map *gpio); - -/* Get GPIO pin value */ -int get_gpio(int gpio_num); -/* - * Get a number comprised of multiple GPIO values. gpio_num_array points to - * the array of GPIO pin numbers to scan, terminated by -1. - */ -unsigned get_gpios(const int *gpio_num_array); - -#endif diff --git a/src/southbridge/intel/fsp_rangeley/irq.h b/src/southbridge/intel/fsp_rangeley/irq.h deleted file mode 100644 index 2028aaa3a9..0000000000 --- a/src/southbridge/intel/fsp_rangeley/irq.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _RANGELEY_IRQ_H_ -#define _RANGELEY_IRQ_H_ - -#define PIRQA_APIC_IRQ 16 -#define PIRQB_APIC_IRQ 17 -#define PIRQC_APIC_IRQ 18 -#define PIRQD_APIC_IRQ 19 -#define PIRQE_APIC_IRQ 20 -#define PIRQF_APIC_IRQ 21 -#define PIRQG_APIC_IRQ 22 -#define PIRQH_APIC_IRQ 23 -/* The below IRQs are for when devices are in ACPI mode. Active low. */ -#define LPE_DMA0_IRQ 24 -#define LPE_DMA1_IRQ 25 -#define LPE_SSP0_IRQ 26 -#define LPE_SSP1_IRQ 27 -#define LPE_SSP2_IRQ 28 -#define LPE_IPC2HOST_IRQ 29 -#define LPSS_I2C1_IRQ 32 -#define LPSS_I2C2_IRQ 33 -#define LPSS_I2C3_IRQ 34 -#define LPSS_I2C4_IRQ 35 -#define LPSS_I2C5_IRQ 36 -#define LPSS_I2C6_IRQ 37 -#define LPSS_I2C7_IRQ 38 -#define LPSS_HSUART1_IRQ 39 -#define LPSS_HSUART2_IRQ 40 -#define LPSS_SPI_IRQ 41 -#define LPSS_DMA1_IRQ 42 -#define LPSS_DMA2_IRQ 43 -#define SCC_EMMC_IRQ 44 -#define SCC_SDIO_IRQ 46 -#define SCC_SD_IRQ 47 -#define GPIO_NC_IRQ 48 -#define GPIO_SC_IRQ 49 -#define GPIO_SUS_IRQ 50 -/* GPIO direct / dedicated IRQs. */ -#define GPIO_S0_DED_IRQ_0 51 -#define GPIO_S0_DED_IRQ_1 52 -#define GPIO_S0_DED_IRQ_2 53 -#define GPIO_S0_DED_IRQ_3 54 -#define GPIO_S0_DED_IRQ_4 55 -#define GPIO_S0_DED_IRQ_5 56 -#define GPIO_S0_DED_IRQ_6 57 -#define GPIO_S0_DED_IRQ_7 58 -#define GPIO_S0_DED_IRQ_8 59 -#define GPIO_S0_DED_IRQ_9 60 -#define GPIO_S0_DED_IRQ_10 61 -#define GPIO_S0_DED_IRQ_11 62 -#define GPIO_S0_DED_IRQ_12 63 -#define GPIO_S0_DED_IRQ_13 64 -#define GPIO_S0_DED_IRQ_14 65 -#define GPIO_S0_DED_IRQ_15 66 -#define GPIO_S5_DED_IRQ_0 67 -#define GPIO_S5_DED_IRQ_1 68 -#define GPIO_S5_DED_IRQ_2 69 -#define GPIO_S5_DED_IRQ_3 70 -#define GPIO_S5_DED_IRQ_4 71 -#define GPIO_S5_DED_IRQ_5 72 -#define GPIO_S5_DED_IRQ_6 73 -#define GPIO_S5_DED_IRQ_7 74 -#define GPIO_S5_DED_IRQ_8 75 -#define GPIO_S5_DED_IRQ_9 76 -#define GPIO_S5_DED_IRQ_10 77 -#define GPIO_S5_DED_IRQ_11 78 -#define GPIO_S5_DED_IRQ_12 79 -#define GPIO_S5_DED_IRQ_13 80 -#define GPIO_S5_DED_IRQ_14 81 -#define GPIO_S5_DED_IRQ_15 82 -/* DIRQs - Two levels of expansion to evaluate to numeric constants for ASL. */ -#define _GPIO_S0_DED_IRQ(slot) GPIO_S0_DED_IRQ_##slot -#define _GPIO_S5_DED_IRQ(slot) GPIO_S5_DED_IRQ_##slot -#define GPIO_S0_DED_IRQ(slot) _GPIO_S0_DED_IRQ(slot) -#define GPIO_S5_DED_IRQ(slot) _GPIO_S5_DED_IRQ(slot) - -/* PIC IRQ settings. */ -#define PIRQ_PIC_IRQ3 0x3 -#define PIRQ_PIC_IRQ4 0x4 -#define PIRQ_PIC_IRQ5 0x5 -#define PIRQ_PIC_IRQ6 0x6 -#define PIRQ_PIC_IRQ7 0x7 -#define PIRQ_PIC_IRQ9 0x9 -#define PIRQ_PIC_IRQ10 0xa -#define PIRQ_PIC_IRQ11 0xb -#define PIRQ_PIC_IRQ12 0xc -#define PIRQ_PIC_IRQ14 0xe -#define PIRQ_PIC_IRQ15 0xf -#define PIRQ_PIC_IRQDISABLE 0x80 -#define PIRQ_PIC_UNKNOWN_UNUSED 0xff - - -/* Overloaded term, but these values determine the per device route. */ -#define PIRQA 0 -#define PIRQB 1 -#define PIRQC 2 -#define PIRQD 3 -#define PIRQE 4 -#define PIRQF 5 -#define PIRQG 6 -#define PIRQH 7 - -/* These registers live behind the ILB_BASE_ADDRESS */ -#define ACTL 0x00 -# define SCIS_MASK 0x07 -# define SCIS_IRQ9 0x00 -# define SCIS_IRQ10 0x01 -# define SCIS_IRQ11 0x02 -# define SCIS_IRQ20 0x04 -# define SCIS_IRQ21 0x05 -# define SCIS_IRQ22 0x06 -# define SCIS_IRQ23 0x07 - -/* In each mainboard directory there should exist a header file irqroute.h that - * defines the PCI_DEV_PIRQ_ROUTES and PIRQ_PIC_ROUTES macros which - * consist of PCI_DEV_PIRQ_ROUTE and PIRQ_PIC entries. */ - -#if !defined(__ASSEMBLER__) && !defined(__ACPI__) -#include <stdint.h> - -#define NUM_OF_PCI_DEVS 32 -#define NUM_PIRQS 8 - -struct rangeley_irq_route { - /* Per device configuration. */ - uint16_t pcidev[NUM_OF_PCI_DEVS]; - /* Route path for each internal PIRQx in PIC mode. */ - uint8_t pic[NUM_PIRQS]; -}; - -extern const struct rangeley_irq_route global_rangeley_irq_route; - -#define DEFINE_IRQ_ROUTES \ - const struct rangeley_irq_route global_rangeley_irq_route = { \ - .pcidev = { PCI_DEV_PIRQ_ROUTES, }, \ - .pic = { PIRQ_PIC_ROUTES, }, \ - } - -#define PCI_DEV_PIRQ_ROUTE(dev_, a_, b_, c_, d_) \ - [dev_] = ((PIRQ ## d_) << 12) | ((PIRQ ## c_) << 8) | \ - ((PIRQ ## b_) << 4) | ((PIRQ ## a_) << 0) - -#define PIRQ_PIC(pirq_, pic_irq_) \ - [PIRQ ## pirq_] = PIRQ_PIC_IRQ ## pic_irq_ - -#endif /* !defined(__ASSEMBLER__) && !defined(__ACPI__) */ - -#endif /* _RANGELEY_IRQ_H_ */ diff --git a/src/southbridge/intel/fsp_rangeley/lpc.c b/src/southbridge/intel/fsp_rangeley/lpc.c deleted file mode 100644 index c04708194c..0000000000 --- a/src/southbridge/intel/fsp_rangeley/lpc.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <pc80/mc146818rtc.h> -#include <pc80/isa-dma.h> -#include <pc80/i8259.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/acpi.h> -#include <cpu/cpu.h> -#include <elog.h> -#include <string.h> -#include <cbmem.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include "soc.h" -#include "irq.h" -#include "nvs.h" - -#define NMI_OFF 0 - -#define ENABLE_ACPI_MODE_IN_COREBOOT 0 -#define TEST_SMM_FLASH_LOCKDOWN 0 - -typedef struct southbridge_intel_fsp_rangeley_config config_t; - -static void soc_enable_apic(struct device *dev) -{ - int i; - u32 reg32; - volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); - volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); - u8 *ilb_base = (u8 *)(pci_read_config32(dev, IBASE) & ~0x0f); - - /* - * Enable ACPI I/O and power management. - * Set SCI IRQ to IRQ9 - */ - write32(ilb_base + ILB_OIC, 0x100); /* AEN */ - reg32 = read32(ilb_base + ILB_OIC); /* Read back per BWG */ - write32(ilb_base + ILB_ACTL, 0); /* ACTL bit 2:0 SCIS IRQ9 */ - - *ioapic_index = 0; - *ioapic_data = (1 << 25); - - /* Affirm full set of redirection table entries ("write once") */ - *ioapic_index = 1; - reg32 = *ioapic_data; - *ioapic_index = 1; - *ioapic_data = reg32; - - *ioapic_index = 0; - reg32 = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); - if (reg32 != (1 << 25)) - die("APIC Error\n"); - - printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); - for (i=0; i<3; i++) { - *ioapic_index = i; - printk(BIOS_SPEW, " reg 0x%04x:", i); - reg32 = *ioapic_data; - printk(BIOS_SPEW, " 0x%08x\n", reg32); - } - - *ioapic_index = 3; /* Select Boot Configuration register. */ - *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ -} - -static void soc_enable_serial_irqs(struct device *dev) -{ - u8 *ibase; - - ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF); - - /* Set packet length and toggle silent mode bit for one frame. */ - write8(ibase + ILB_SERIRQ_CNTL, (1 << 7)); - -#if !CONFIG_SERIRQ_CONTINUOUS_MODE - write8(ibase + ILB_SERIRQ_CNTL, 0); -#endif -} - -/* - * Write PCI config space IRQ assignments. PCI devices have the INT_LINE - * (0x3C) and INT_PIN (0x3D) registers which report interrupt routing - * information to operating systems and drivers. The INT_PIN register is - * generally read only and reports which interrupt pin A - D it uses. The - * INT_LINE register is configurable and reports which IRQ (generally the - * PIC IRQs 1 - 15) it will use. This needs to take interrupt pin swizzling - * on devices that are downstream on a PCI bridge into account. - * - * This function will loop through all enabled PCI devices and program the - * INT_LINE register with the correct PIC IRQ number for the INT_PIN that it - * uses. It then configures each interrupt in the pic to be level triggered. - */ -static void write_pci_config_irqs(void) -{ - device_t irq_dev; - device_t targ_dev; - uint8_t int_line = 0; - uint8_t original_int_pin = 0; - uint8_t new_int_pin = 0; - uint16_t current_bdf = 0; - uint16_t parent_bdf = 0; - uint8_t pirq = 0; - uint8_t device_num = 0; - const struct rangeley_irq_route *ir = &global_rangeley_irq_route; - - if (ir == NULL) { - printk(BIOS_WARNING, "Warning: Can't write PCI IRQ assignments because" - " 'global_rangeley_irq_route' structure does not exist\n"); - return; - } - - /* - * Loop through all enabled devices and program their - * INT_LINE, INT_PIN registers from values taken from - * the Interrupt Route registers in the ILB - */ - printk(BIOS_DEBUG, "PCI_CFG IRQ: Write PCI config space IRQ assignments\n"); - for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - - if ((irq_dev->path.type != DEVICE_PATH_PCI) || - (!irq_dev->enabled)) - continue; - - current_bdf = irq_dev->path.pci.devfn | - irq_dev->bus->secondary << 8; - - /* - * Step 1: Get the INT_PIN and device structure to look for - * in the pirq_data table defined in the mainboard directory. - */ - targ_dev = NULL; - new_int_pin = get_pci_irq_pins(irq_dev, &targ_dev); - if (targ_dev == NULL || new_int_pin < 1) - continue; - - /* Get the original INT_PIN for record keeping */ - original_int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - parent_bdf = targ_dev->path.pci.devfn - | targ_dev->bus->secondary << 8; - device_num = PCI_SLOT(parent_bdf); - - if (ir->pcidev[device_num] == 0) { - printk(BIOS_WARNING, - "Warning: PCI Device %d does not have an IRQ entry, skipping it\n", - device_num); - continue; - } - - /* Find the PIRQ that is attached to the INT_PIN this device uses */ - pirq = (ir->pcidev[device_num] >> ((new_int_pin - 1) * 4)) & 0xF; - - /* Get the INT_LINE this device/function will use */ - int_line = ir->pic[pirq]; - - if (int_line != PIRQ_PIC_IRQDISABLE) { - /* Set this IRQ to level triggered since it is used by a PCI device */ - i8259_configure_irq_trigger(int_line, IRQ_LEVEL_TRIGGERED); - /* Set the Interrupt Line register in PCI config space */ - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } else { - /* Set the Interrupt line register as "unknown or unused" */ - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, - PIRQ_PIC_UNKNOWN_UNUSED); - } - - printk(BIOS_SPEW, "\tINT_PIN\t\t: %d (%s)\n", - original_int_pin, pin_to_str(original_int_pin)); - if (parent_bdf != current_bdf) - printk(BIOS_SPEW, "\tSwizzled to\t: %d (%s)\n", - new_int_pin, pin_to_str(new_int_pin)); - printk(BIOS_SPEW, "\tPIRQ\t\t: %c\n" - "\tINT_LINE\t: 0x%X (IRQ %d)\n", - 'A' + pirq, int_line, int_line); - } - printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n"); -} - -static void soc_pirq_init(device_t dev) -{ - int i, j; - int pirq; - u8 *ibase = (u8 *)(pci_read_config32(dev, IBASE) & ~0xF); - u8 *pr_base = ibase + 0x08; - u16 *ir_base = (u16 *)(ibase + 0x20); - u32 *actl = (u32 *)ibase; - const struct rangeley_irq_route *ir = &global_rangeley_irq_route; - - /* Set up the PIRQ PIC routing based on static config. */ - printk(BIOS_SPEW, "Start writing IRQ assignments\n" - "PIRQ\tA \tB \tC \tD \tE \tF \tG \tH\n" - "IRQ "); - for (i = 0; i < NUM_PIRQS; i++) { - write8(pr_base + i*sizeof(ir->pic[i]), ir->pic[i]); - printk(BIOS_SPEW, "\t%d", ir->pic[i]); - } - printk(BIOS_SPEW, "\n\n"); - - /* Set up the per device PIRQ routing based on static config. */ - printk(BIOS_SPEW, "\t\t\tPIRQ[A-H] routed to each INT_PIN[A-D]\n" - "Dev\tINTA (IRQ)\tINTB (IRQ)\tINTC (IRQ)\tINTD (IRQ)\n"); - for (i = 0; i < NUM_OF_PCI_DEVS; i++) { - write16(ir_base + i, ir->pcidev[i]); - - /* If the entry is more than just 0, print it out */ - if(ir->pcidev[i]) { - printk(BIOS_SPEW, " %d: ", i); - for (j = 0; j < 4; j++) { - pirq = (ir->pcidev[i] >> (j * 4)) & 0xF; - printk(BIOS_SPEW, "\t%-4c (%d)", 'A' + pirq, ir->pic[pirq]); - } - printk(BIOS_SPEW, "\n"); - } - } - - /* Route SCI to IRQ9 */ - write32(actl, (read32(actl) & ~SCIS_MASK) | SCIS_IRQ9); - printk(BIOS_SPEW, "Finished writing IRQ assignments\n"); - - /* Write IRQ assignments to PCI config space */ - write_pci_config_irqs(); -} - -static void soc_power_options(device_t dev) -{ - u8 reg8; - u16 pmbase; - u32 reg32; - - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - int nmi_option; - - /* Set up NMI on errors. */ - reg8 = inb(0x61); - reg8 &= 0x0f; /* Higher Nibble must be 0 */ - reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ - // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ - reg8 |= (1 << 2); /* PCI SERR# Disable for now */ - outb(reg8, 0x61); - - reg8 = inb(0x70); - nmi_option = NMI_OFF; - get_option(&nmi_option, "nmi"); - if (nmi_option) { - printk(BIOS_INFO, "NMI sources enabled.\n"); - reg8 &= ~(1 << 7); /* Set NMI. */ - } else { - printk(BIOS_INFO, "NMI sources disabled.\n"); - reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ - } - outb(reg8, 0x70); - - pmbase = pci_read_config16(dev, ABASE) & ~0xf; - - outl(config->gpe0_en, pmbase + GPE0_EN); - outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); - - /* Set up power management block and determine sleep mode */ - reg32 = inl(pmbase + PM1_CNT); // PM1_CNT - reg32 &= ~(7 << 10); // SLP_TYP - reg32 |= (1 << 0); // SCI_EN - outl(reg32, pmbase + PM1_CNT); -} - -/* Disable the HPET, Clear the counter, and re-enable it. */ -static void enable_hpet(void) -{ - write8((u8 *)HPET_GCFG, 0x00); - write32((u32 *)HPET_MCV, 0x00000000); - write32((u32 *)(HPET_MCV + 0x04), 0x00000000); - write8((u8 *)HPET_GCFG, 0x01); -} - -static void soc_disable_smm_only_flashing(struct device *dev) -{ - u8 reg8; - - printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); - reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - reg8 &= ~(1 << 5); - pci_write_config8(dev, 0xdc, reg8); -} - -static void lpc_init(struct device *dev) -{ - printk(BIOS_DEBUG, "soc: lpc_init\n"); - - /* Set the value for PCI command register. */ - pci_write_config16(dev, PCI_COMMAND, 0x000f); - - /* IO APIC initialization. */ - soc_enable_apic(dev); - - soc_enable_serial_irqs(dev); - - /* Setup the PIRQ. */ - soc_pirq_init(dev); - - /* Setup power options. */ - soc_power_options(dev); - - /* Initialize power management */ - switch (soc_silicon_type()) { - case SOC_TYPE_RANGELEY: - break; - default: - printk(BIOS_DEBUG, "Unknown Chipset: 0x%04x\n", dev->device); - } - - /* Initialize ISA DMA. */ - isa_dma_init(); - - /* Initialize the High Precision Event Timers, if present. */ - enable_hpet(); - - setup_i8259(); - - /* Interrupt 9 should be level triggered (SCI) */ - i8259_configure_irq_trigger(9, 1); - - soc_disable_smm_only_flashing(dev); -} - -static void soc_lpc_read_resources(device_t dev) -{ - struct resource *res; - config_t *config = dev->chip_info; - u8 io_index = 0; - - /* Get the normal PCI resources of this device. */ - pci_dev_read_resources(dev); - - /* Add an extra subtractive resource for both memory and I/O. */ - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = 0; - res->size = 0x1000; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = 0xff800000; - res->size = 0x00800000; /* 8 MB for flash */ - res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - /* Set SOC IO decode ranges if required.*/ - if ((config->gen1_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen1_dec & 0xFFFC; - res->size = (config->gen1_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } - - if ((config->gen2_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen2_dec & 0xFFFC; - res->size = (config->gen2_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } - - if ((config->gen3_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen3_dec & 0xFFFC; - res->size = (config->gen3_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } - - if ((config->gen4_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen4_dec & 0xFFFC; - res->size = (config->gen4_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } -} - -static void soc_lpc_enable_resources(device_t dev) -{ - return pci_dev_enable_resources(dev); -} - -static void soc_lpc_enable(device_t dev) -{ - soc_enable(dev); -} - -static void set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static void southbridge_inject_dsdt(device_t dev) -{ - global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof (*gnvs)); - - if (gnvs) { - memset(gnvs, 0, sizeof(*gnvs)); - acpi_create_gnvs(gnvs); - acpi_save_gnvs((unsigned long)gnvs); -#if CONFIG_HAVE_SMI_HANDLER - /* And tell SMI about it */ - smm_setup_structures(gnvs, NULL, NULL); -#endif - - /* Add it to DSDT. */ - acpigen_write_scope("\\"); - acpigen_write_name_dword("NVSA", (u32) gnvs); - acpigen_pop_len(); - } -} - -static struct pci_operations pci_ops = { - .set_subsystem = set_subsystem, -}; - -static struct device_operations device_ops = { - .read_resources = soc_lpc_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = soc_lpc_enable_resources, - .init = lpc_init, - .write_acpi_tables = acpi_write_hpet, - .acpi_inject_dsdt_generator = southbridge_inject_dsdt, - .enable = soc_lpc_enable, - .scan_bus = scan_lpc_bus, - .ops_pci = &pci_ops, -}; - -/* IDs for LPC device of Intel 89xx Series Chipset */ -static const unsigned short pci_device_ids[] = { 0x1F38, 0x1F39, 0x1F3A, 0x1F3B, - 0 }; - -static const struct pci_driver soc_lpc __pci_driver = { - .ops = &device_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/southbridge/intel/fsp_rangeley/nvs.h b/src/southbridge/intel/fsp_rangeley/nvs.h deleted file mode 100644 index cabbdea941..0000000000 --- a/src/southbridge/intel/fsp_rangeley/nvs.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -typedef struct { - /* Miscellaneous */ - u16 osys; /* 0x00 - Operating System */ - u8 smif; /* 0x02 - SMI function call ("TRAP") */ - u8 prm0; /* 0x03 - SMI function call parameter */ - u8 prm1; /* 0x04 - SMI function call parameter */ - u8 scif; /* 0x05 - SCI function call (via _L00) */ - u8 prm2; /* 0x06 - SCI function call parameter */ - u8 prm3; /* 0x07 - SCI function call parameter */ - u8 lckf; /* 0x08 - Global Lock function for EC */ - u8 prm4; /* 0x09 - Lock function parameter */ - u8 prm5; /* 0x0a - Lock function parameter */ - u32 p80d; /* 0x0b - Debug port (IO 0x80) value */ - u8 lids; /* 0x0f - LID state (open = 1) */ - u8 pwrs; /* 0x10 - Power state (AC = 1) */ - /* Thermal policy */ - u8 tlvl; /* 0x11 - Throttle Level Limit */ - u8 flvl; /* 0x12 - Current FAN Level */ - u8 tcrt; /* 0x13 - Critical Threshold */ - u8 tpsv; /* 0x14 - Passive Threshold */ - u8 tmax; /* 0x15 - CPU Tj_max */ - u8 f0of; /* 0x16 - FAN 0 OFF Threshold */ - u8 f0on; /* 0x17 - FAN 0 ON Threshold */ - u8 f0pw; /* 0x18 - FAN 0 PWM value */ - u8 f1of; /* 0x19 - FAN 1 OFF Threshold */ - u8 f1on; /* 0x1a - FAN 1 ON Threshold */ - u8 f1pw; /* 0x1b - FAN 1 PWM value */ - u8 f2of; /* 0x1c - FAN 2 OFF Threshold */ - u8 f2on; /* 0x1d - FAN 2 ON Threshold */ - u8 f2pw; /* 0x1e - FAN 2 PWM value */ - u8 f3of; /* 0x1f - FAN 3 OFF Threshold */ - u8 f3on; /* 0x20 - FAN 3 ON Threshold */ - u8 f3pw; /* 0x21 - FAN 3 PWM value */ - u8 f4of; /* 0x22 - FAN 4 OFF Threshold */ - u8 f4on; /* 0x23 - FAN 4 ON Threshold */ - u8 f4pw; /* 0x24 - FAN 4 PWM value */ - u8 tmps; /* 0x25 - Temperature Sensor ID */ - u8 rsvd3[2]; - /* Processor Identification */ - u8 apic; /* 0x28 - APIC enabled */ - u8 mpen; /* 0x29 - MP capable/enabled */ - u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */ - u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */ - u8 ppcm; /* 0x2c - Max. PPC state */ - u8 pcnt; /* 0x2d - Processor Count */ - u8 rsvd4[4]; - /* Super I/O & CMOS config */ - u8 natp; /* 0x32 - SIO type */ - u8 s5u0; /* 0x33 - Enable USB0 in S5 */ - u8 s5u1; /* 0x34 - Enable USB1 in S5 */ - u8 s3u0; /* 0x35 - Enable USB0 in S3 */ - u8 s3u1; /* 0x36 - Enable USB1 in S3 */ - u8 s33g; /* 0x37 - Enable S3 in 3G */ - u32 obsolete_cmem; /* 0x38 - CBMEM TOC */ - /* Integrated Graphics Device */ - u8 igds; /* 0x3c - IGD state */ - u8 tlst; /* 0x3d - Display Toggle List Pointer */ - u8 cadl; /* 0x3e - currently attached devices */ - u8 padl; /* 0x3f - previously attached devices */ - u16 cste; /* 0x40 - current display state */ - u16 nste; /* 0x42 - next display state */ - u16 sste; /* 0x44 - set display state */ - u8 ndid; /* 0x46 - number of device ids */ - u32 did[5]; /* 0x47 - 5b device id 1..5 */ - u8 rsvd5[0x9]; - /* Backlight Control */ - u8 blcs; /* 0x64 - Backlight Control possible */ - u8 brtl; - u8 odds; - u8 rsvd6[0x7]; - /* Ambient Light Sensors*/ - u8 alse; /* 0x6e - ALS enable */ - u8 alaf; - u8 llow; - u8 lhih; - u8 rsvd7[0x6]; - /* Extended Mobile Access */ - u8 emae; /* 0x78 - EMA enable */ - u16 emap; /* 0x79 - EMA pointer */ - u16 emal; /* 0x7a - EMA Length */ - u8 rsvd8[0x5]; - /* MEF */ - u8 mefe; /* 0x82 - MEF enable */ - u8 rsvd9[0x9]; - /* TPM support */ - u8 tpmp; /* 0x8c - TPM */ - u8 tpme; - u8 rsvd10[8]; - /* SATA */ - u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */ - u8 gtf1[7]; - u8 gtf2[7]; - u8 idem; - u8 idet; - u8 rsvd11[7]; - /* IGD OpRegion (not implemented yet) */ - u32 aslb; /* 0xb4 - IGD OpRegion Base Address */ - u8 ibtt; /* 0xb8 - IGD boot type */ - u8 ipat; /* 0xb9 - IGD panel type */ - u8 itvf; /* 0xba - IGD TV format */ - u8 itvm; /* 0xbb - IGD TV minor format */ - u8 ipsc; /* 0xbc - IGD Panel Scaling */ - u8 iblc; /* 0xbd - IGD BLC configuration */ - u8 ibia; /* 0xbe - IGD BIA configuration */ - u8 issc; /* 0xbf - IGD SSC configuration */ - u8 i409; /* 0xc0 - IGD 0409 modified settings */ - u8 i509; /* 0xc1 - IGD 0509 modified settings */ - u8 i609; /* 0xc2 - IGD 0609 modified settings */ - u8 i709; /* 0xc3 - IGD 0709 modified settings */ - u8 idmm; /* 0xc4 - IGD Power Conservation */ - u8 idms; /* 0xc5 - IGD DVMT memory size */ - u8 if1e; /* 0xc6 - IGD Function 1 Enable */ - u8 hvco; /* 0xc7 - IGD HPLL VCO */ - u32 nxd[8]; /* 0xc8 - IGD next state DIDx for _DGS */ - u8 isci; /* 0xe8 - IGD SMI/SCI mode (0: SCI) */ - u8 pavp; /* 0xe9 - IGD PAVP data */ - u8 rsvd12; /* 0xea - rsvd */ - u8 oscc; /* 0xeb - PCIe OSC control */ - u8 npce; /* 0xec - native pcie support */ - u8 plfl; /* 0xed - platform flavor */ - u8 brev; /* 0xee - board revision */ - u8 dpbm; /* 0xef - digital port b mode */ - u8 dpcm; /* 0xf0 - digital port c mode */ - u8 dpdm; /* 0xf1 - digital port c mode */ - u8 alfp; /* 0xf2 - active lfp */ - u8 imon; /* 0xf3 - current graphics turbo imon value */ - u8 mmio; /* 0xf4 - 64bit mmio support */ - u8 rsvd13[11]; /* 0xf5 - rsvd */ - -} __attribute__((packed)) global_nvs_t; - -void acpi_create_gnvs(global_nvs_t *gnvs); -#ifdef __SMM__ -/* Used in SMM to find the ACPI GNVS address */ -global_nvs_t *smm_get_gnvs(void); -#endif diff --git a/src/southbridge/intel/fsp_rangeley/pci_devs.h b/src/southbridge/intel/fsp_rangeley/pci_devs.h deleted file mode 100644 index 03b0193f5f..0000000000 --- a/src/southbridge/intel/fsp_rangeley/pci_devs.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _RANGELEY_PCI_DEVS_H_ -#define _RANGELEY_PCI_DEVS_H_ - -#define BUS0 0 - -/* All these devices live on bus 0 with the associated device and function */ -#define DEV_FUNC(x,y) ((x<<3) | y) - -/* Host Bridge */ -#define SOC_DEV 0x0 -#define SOC_FUNC 0 -# define SOC_DEVID 0x1f08 -# define SOC_DEV_FUNC DEV_FUNC(SOC_DEV,SOC_FUNC) - -/* PCIE Port 1 */ -#define PCIE_PORT1_DEV 0x1 -#define PCIE_PORT1_FUNC 0 -# define PCIE_PORT1_DEVID 0x1f10 -# define PCIE_PORT1_DEV_FUNC DEV_FUNC(PCIE_PORT1_DEV,PCIE_PORT1_FUNC) - -/* PCIE Port 2 */ -#define PCIE_PORT2_DEV 0x2 -#define PCIE_PORT2_FUNC 0 -# define PCIE_PORT2_DEVID 0x1f11 -# define PCIE_PORT2_DEV_FUNC DEV_FUNC(PCIE_PORT2_DEV,PCIE_PORT2_FUNC) - -/* PCIE Port 3 */ -#define PCIE_PORT3_DEV 0x3 -#define PCIE_PORT3_FUNC 0 -# define PCIE_PORT3_DEVID 0x1f12 -# define PCIE_PORT3_DEV_FUNC DEV_FUNC(PCIE_PORT3_DEV,PCIE_PORT3_FUNC) - -/* PCIE Port 4 */ -#define PCIE_PORT4_DEV 0x4 -#define PCIE_PORT4_FUNC 0 -# define PCIE_PORT4_DEVID 0x1f13 -# define PCIE_PORT4_DEV_FUNC DEV_FUNC(PCIE_PORT4_DEV,PCIE_PORT4_FUNC) - -/* Host Bridge, Fabric, and RAS Registers */ -#define HOST_BRIDGE_DEV 0xe -#define HOST_BRIDGE_FUNC 0 -# define HOST_BRIDGE_DEVID 0x1f14 -# define HOST_BRIDGE_DEV_FUNC DEV_FUNC(HOST_BRIDGE_DEV,HOST_BRIDGE_FUNC) - -/* Root Complex Event Collector (RCEC) */ -#define RCEC_DEV 0xf -#define RCEC_FUNC 0 -# define RCEC_DEVID 0x1f16 -# define RCEC_DEV_FUNC DEV_FUNC(RCEC_DEV,RCEC_FUNC) - -/* SMBus 2.0 1 */ -#define SMBUS1_DEV 0x13 -#define SMBUS1_FUNC 0 -# define SMBUS1_DEVID 0x1f15 -# define SMBUS1_DEV_FUNC DEV_FUNC(SMBUS1_DEV,SMBUS1_FUNC) - -/* Gigabit Ethernet (GbE) */ -#define GBE_DEV 0x14 -#define GBE_DEVID 0x1f41 -#define GBE1_DEV GBE_DEV -#define GBE1_FUNC 0 -# define GBE1_DEVID GBE_DEVID -# define GBE1_DEV_FUNC DEV_FUNC(GBE1_DEV,GBE1_FUNC) -#define GBE2_DEV GBE_DEV -#define GBE2_FUNC 1 -# define GBE2_DEVID GBE_DEVID -# define GBE2_DEV_FUNC DEV_FUNC(GBE2_DEV,GBE2_FUNC) -#define GBE3_DEV GBE_DEV -#define GBE3_FUNC 2 -# define GBE3_DEVID GBE_DEVID -# define GBE3_DEV_FUNC DEV_FUNC(GBE3_DEV,GBE3_FUNC) -#define GBE4_DEV GBE_DEV -#define GBE4_FUNC 3 -# define GBE4_DEVID GBE_DEVID -# define GBE4_DEV_FUNC DEV_FUNC(GBE4_DEV,GBE4_FUNC) - -/* USB 2.0 */ -#define USB2_DEV 0x16 -#define USB2_FUNC 0 -# define USB2_DEVID 0x1f2c -# define USB2_DEV_FUNC DEV_FUNC(USB2_DEV,USB2_FUNC) - -/* SATA Gen 2 */ -#define SATA2_DEV 0x17 -#define SATA2_FUNC 0 -# define SATA2_DEVID 0x1f22 -# define SATA2_DEV_FUNC DEV_FUNC(SATA2_DEV,SATA2_FUNC) - -/* SATA Gen 3 */ -#define SATA3_DEV 0x18 -#define SATA3_FUNC 0 -# define SATA3_DEVID 0x1f32 -# define SATA3_DEV_FUNC DEV_FUNC(SATA3_DEV,SATA3_FUNC) - -/* Platform Control Unit (PCU) */ -#define PCU_DEV 0x1f - -/* Low Pin Count (LPC/ISA) */ -#define LPC_DEV PCU_DEV -#define LPC_FUNC 0 -# define LPC_DEVID 0x1f38 -# define LPC_DEV_FUNC DEV_FUNC(LPC_DEV,LPC_FUNC) -# define LPC_BDF PCI_DEV(BUS0, LPC_DEV, LPC_FUNC) - -/* SMBus 2.0 0 */ -#define SMBUS0_DEV PCU_DEV -#define SMBUS0_FUNC 3 -# define SMBUS0_DEVID 0x1f3c -# define SMBUS0_DEV_FUNC DEV_FUNC(SMBUS0_DEV,SMBUS0_FUNC) - -/* Intel QuickAssist Integrated Accelerator (IQIA) */ -#define IQAT_DEV 0xb -#define IQAT_FUNC 0 -# define IQAT_DEVID 0x1f18 -# define IQAT_DEV_FUNC DEV_FUNC(IQAT_DEV,IQAT_FUNC) - -#endif /* _RANGELEY_PCI_DEVS_H_ */ diff --git a/src/southbridge/intel/fsp_rangeley/reset.c b/src/southbridge/intel/fsp_rangeley/reset.c deleted file mode 100644 index 8ef890ab56..0000000000 --- a/src/southbridge/intel/fsp_rangeley/reset.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <arch/io.h> -#include <reset.h> - -void soft_reset(void) -{ - hard_reset(); -} - -void hard_reset(void) -{ - outb(0x02, 0xcf9); - outb(0x06, 0xcf9); -} diff --git a/src/southbridge/intel/fsp_rangeley/romstage.c b/src/southbridge/intel/fsp_rangeley/romstage.c deleted file mode 100644 index bc58b487c0..0000000000 --- a/src/southbridge/intel/fsp_rangeley/romstage.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <timestamp.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <cbmem.h> -#include <console/console.h> -#include <drivers/intel/fsp1_0/fsp_util.h> -#include "northbridge/intel/fsp_rangeley/northbridge.h" -#include "southbridge/intel/fsp_rangeley/soc.h" -#include "southbridge/intel/fsp_rangeley/gpio.h" -#include "southbridge/intel/fsp_rangeley/romstage.h" -#include <arch/cpu.h> -#include <arch/stages.h> -#include <cpu/x86/msr.h> -#include "gpio.h" - -void main(FSP_INFO_HEADER *fsp_info_header) -{ - uint32_t fd_mask = 0; - uint32_t *func_dis = (uint32_t *)(DEFAULT_PBASE + PBASE_FUNC_DIS); - - /* - * Do not use the Serial Console before it is setup. - * This causes the I/O to clog and a side effect is - * that the reset button stops functioning. So - * instead just use outb so it doesn't output to the - * console when CONFIG_CONSOLE_POST. - */ - outb(0x40, 0x80); - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - /* Rangeley UART POR state is enabled */ - console_init(); - post_code(0x41); - - /* Enable GPIOs BAR */ - pci_write_config32(SOC_LPC_DEV, GBASE, DEFAULT_GPIOBASE|0x02); - - early_mainboard_romstage_entry(); - - post_code(0x42); - rangeley_sb_early_initialization(); - - post_code(0x46); - /* Program any required function disables */ - get_func_disables(&fd_mask); - - if (fd_mask != 0) { - write32(func_dis, read32(func_dis) | fd_mask); - /* Ensure posted write hits. */ - read32(func_dis); - } - - timestamp_add_now(TS_BEFORE_INITRAM); - - /* - * Call early init to initialize memory and chipset. This function returns - * to the romstage_main_continue function with a pointer to the HOB - * structure. - */ - post_code(0x47); - printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n"); - fsp_early_init(fsp_info_header); - die("Uh Oh! fsp_early_init should not return here.\n"); -} - -/******************************************************************************* - * The FSP early_init function returns to this function. - * Memory is setup and the stack is set by the FSP. - */ -void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr) { - int cbmem_was_initted; - void *cbmem_hob_ptr; - - timestamp_add_now(TS_AFTER_INITRAM); - - post_code(0x48); - printk(BIOS_DEBUG, "%s status: %x hob_list_ptr: %x\n", - __func__, (u32) status, (u32) hob_list_ptr); - -#if IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE) - /* FSP reconfigures USB, so reinit it to have debug */ - usbdebug_init(); -#endif /* IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE) */ - - printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status); - - post_code(0x4b); - late_mainboard_romstage_entry(); - - post_code(0x4c); - - /* Decode E0000 and F0000 segment to DRAM */ - sideband_write(B_UNIT, BMISC, sideband_read(B_UNIT, BMISC) | (1 << 1) | (1 << 0)); - - quick_ram_check(); - post_code(0x4d); - - cbmem_was_initted = !cbmem_recovery(0); - - /* Save the HOB pointer in CBMEM to be used in ramstage*/ - cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*hob_list_ptr)); - *(u32*)cbmem_hob_ptr = (u32)hob_list_ptr; - post_code(0x4e); - - post_code(0x4f); - - /* Load the ramstage. */ - copy_and_run(); - while (1); -} - -uint64_t get_initial_timestamp(void) -{ - return 0; -} diff --git a/src/southbridge/intel/fsp_rangeley/romstage.h b/src/southbridge/intel/fsp_rangeley/romstage.h deleted file mode 100644 index f3b7242d06..0000000000 --- a/src/southbridge/intel/fsp_rangeley/romstage.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _RANGELEY_ROMSTAGE_H_ -#define _RANGELEY_ROMSTAGE_H_ - -#if !defined(__PRE_RAM__) -#error "Don't include romstage.h from a ramstage compilation unit!" -#endif - -#include <stdint.h> -#include <arch/cpu.h> -#include <drivers/intel/fsp1_0/fsp_util.h> - -void main(FSP_INFO_HEADER *fsp_info_header); -void early_mainboard_romstage_entry(void); -void late_mainboard_romstage_entry(void); -void get_func_disables(uint32_t *mask); - -void romstage_main_continue(EFI_STATUS status, void *hob_list_ptr); - -#endif /* _RANGELEY_ROMSTAGE_H_ */ diff --git a/src/southbridge/intel/fsp_rangeley/sata.c b/src/southbridge/intel/fsp_rangeley/sata.c deleted file mode 100644 index f1398c95c0..0000000000 --- a/src/southbridge/intel/fsp_rangeley/sata.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "soc.h" - -typedef struct southbridge_intel_fsp_rangeley_config config_t; - -static void sata_init(struct device *dev) -{ - u32 reg32; - u16 reg16; - u32 *abar; - - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - printk(BIOS_DEBUG, "SATA: Initializing...\n"); - - if (config == NULL) { - printk(BIOS_ERR, "SATA: ERROR: Device not in devicetree.cb!\n"); - return; - } - - /* SATA configuration is handled by the FSP */ - - /* Enable BARs */ - pci_write_config16(dev, PCI_COMMAND, 0x0007); - - if (config->ide_legacy_combined) { - printk(BIOS_DEBUG, "SATA: Controller in combined mode.\n"); - - /* Set the controller mode */ - reg16 = pci_read_config16(dev, SATA_MAP); - reg16 &= ~(3 << 6); - pci_write_config16(dev, SATA_MAP, reg16); - - /* No AHCI: clear AHCI base */ - pci_write_config32(dev, 0x24, 0x00000000); - - /* And without AHCI BAR no memory decoding */ - reg16 = pci_read_config16(dev, PCI_COMMAND); - reg16 &= ~PCI_COMMAND_MEMORY; - pci_write_config16(dev, PCI_COMMAND, reg16); - } else if(config->sata_ahci) { - printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n"); - - /* Set the controller mode */ - reg16 = pci_read_config16(dev, SATA_MAP); - reg16 &= ~(3 << 6); - reg16 |= (1 << 6); - pci_write_config16(dev, SATA_MAP, reg16); - - /* Initialize AHCI memory-mapped space */ - abar = (u32 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5); - printk(BIOS_DEBUG, "ABAR: %p\n", abar); - - /* Enable AHCI Mode */ - reg32 = read32(abar + 0x01); - reg32 |= (1 << 31); - write32(abar + 0x01, reg32); - } else { - printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n"); - } - - /* Spin up the drives as early as possible via the Port Enable */ - reg16 = pci_read_config16(dev, SATA_PSC); - reg16 &= ~0x3f; - pci_write_config16(dev, SATA_PSC, reg16); - reg16 = pci_read_config16(dev, SATA_PSC); - reg16 |= 0x3f; - pci_write_config16(dev, SATA_PSC, reg16); - -} - -static void sata_enable(device_t dev) -{ -} - -static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static struct pci_operations sata_pci_ops = { - .set_subsystem = sata_set_subsystem, -}; - -static struct device_operations sata_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = sata_init, - .enable = sata_enable, - .scan_bus = 0, - .ops_pci = &sata_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { 0x1f20, 0x1f21, 0x1f22, 0x1f23, - 0x1f30, 0x1f31, 0x1f32, 0x1f33, - 0 }; - -static const struct pci_driver soc_sata __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/southbridge/intel/fsp_rangeley/smbus.c b/src/southbridge/intel/fsp_rangeley/smbus.c deleted file mode 100644 index 7864b1e157..0000000000 --- a/src/southbridge/intel/fsp_rangeley/smbus.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/path.h> -#include <device/smbus.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/io.h> -#include "soc.h" -#include "smbus.h" - -static int lsmbus_read_byte(device_t dev, u8 address) -{ - u16 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - res = find_resource(pbus->dev, 0x20); - - return do_smbus_read_byte(res->base, device, address); -} - -static struct smbus_bus_operations lops_smbus_bus = { - .read_byte = lsmbus_read_byte, -}; - -static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static struct pci_operations smbus_pci_ops = { - .set_subsystem = smbus_set_subsystem, -}; - -static void rangeley_smbus_read_resources(device_t dev) -{ - struct resource *res; - - /* - * The SMBus has two BARS. - * BAR0 - MMIO, not used at boot time - * BAR4 - IO, Used to talk to the SMBUS during boot, so we maintain - * the default setting in the resource allocator. - */ - - res = pci_get_resource(dev, PCI_BASE_ADDRESS_0); - - res = new_resource(dev, PCI_BASE_ADDRESS_4); - res->base = SMBUS_IO_BASE; - res->size = 32; - res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - -} - -static struct device_operations smbus_ops = { - .read_resources = rangeley_smbus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = 0, - .scan_bus = scan_smbus, - .ops_smbus_bus = &lops_smbus_bus, - .ops_pci = &smbus_pci_ops, -}; - -static const struct pci_driver rangeley_smbus __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x1F3C, -}; diff --git a/src/southbridge/intel/fsp_rangeley/smbus.h b/src/southbridge/intel/fsp_rangeley/smbus.h deleted file mode 100644 index 6789e051e1..0000000000 --- a/src/southbridge/intel/fsp_rangeley/smbus.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com> - * Copyright (C) 2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <device/smbus_def.h> -#include "soc.h" - -static void smbus_delay(void) -{ - inb(0x80); -} - -static int smbus_wait_until_ready(u16 smbus_base) -{ - unsigned loops = SMBUS_TIMEOUT; - unsigned char byte; - do { - smbus_delay(); - if (--loops == 0) - break; - byte = inb(smbus_base + SMBHSTSTAT); - } while (byte & 1); - return loops ? 0 : -1; -} - -static int smbus_wait_until_done(u16 smbus_base) -{ - unsigned loops = SMBUS_TIMEOUT; - unsigned char byte; - do { - smbus_delay(); - if (--loops == 0) - break; - byte = inb(smbus_base + SMBHSTSTAT); - } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0); - return loops ? 0 : -1; -} - -static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address) -{ - unsigned char global_status_register; - unsigned char byte; - - if (smbus_wait_until_ready(smbus_base) < 0) { - return SMBUS_WAIT_UNTIL_READY_TIMEOUT; - } - /* Setup transaction */ - /* Disable interrupts */ - outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); - /* Set the device I'm talking too */ - outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD); - /* Set the command/address... */ - outb(address & 0xff, smbus_base + SMBHSTCMD); - /* Set up for a byte data read */ - outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), - (smbus_base + SMBHSTCTL)); - /* Clear any lingering errors, so the transaction will run */ - outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); - - /* Clear the data byte... */ - outb(0, smbus_base + SMBHSTDAT0); - - /* Start the command */ - outb((inb(smbus_base + SMBHSTCTL) | 0x40), - smbus_base + SMBHSTCTL); - - /* Poll for transaction completion */ - if (smbus_wait_until_done(smbus_base) < 0) { - return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; - } - - global_status_register = inb(smbus_base + SMBHSTSTAT); - - /* Ignore the "In Use" status... */ - global_status_register &= ~(3 << 5); - - /* Read results of transaction */ - byte = inb(smbus_base + SMBHSTDAT0); - if (global_status_register != (1 << 1)) { - return SMBUS_ERROR; - } - return byte; -} diff --git a/src/southbridge/intel/fsp_rangeley/soc.c b/src/southbridge/intel/fsp_rangeley/soc.c deleted file mode 100644 index bc6a4525aa..0000000000 --- a/src/southbridge/intel/fsp_rangeley/soc.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <console/console.h> -#include <delay.h> -#include <device/device.h> -#include <device/pci.h> -#include "soc.h" - -static int soc_revision_id = -1; -static int soc_type = -1; - -int soc_silicon_revision(void) -{ - if (soc_revision_id < 0) - soc_revision_id = pci_read_config8( - dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PCI_REVISION_ID); - return soc_revision_id; -} - -int soc_silicon_type(void) -{ - if (soc_type < 0) - soc_type = pci_read_config8( - dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PCI_DEVICE_ID + 1); - return soc_type; -} - -int soc_silicon_supported(int type, int rev) -{ - int cur_type = soc_silicon_type(); - int cur_rev = soc_silicon_revision(); - - switch (type) { - case SOC_TYPE_RANGELEY: - if (cur_type == SOC_TYPE_RANGELEY && cur_rev >= rev) - return 1; - } - - return 0; -} - -/* Set bit in Function Disable register to hide this device */ -static void soc_hide_devfn(unsigned devfn) -{ -/* TODO Function Disable. */ -} - - - - -void soc_enable(device_t dev) -{ - u32 reg32; - - if (!dev->enabled) { - printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); - - /* Ensure memory, IO, and bus master are all disabled */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO); - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Hide this device if possible */ - soc_hide_devfn(dev->path.pci.devfn); - } else { - /* Enable SERR */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 |= PCI_COMMAND_SERR; - pci_write_config32(dev, PCI_COMMAND, reg32); - } -} - -struct chip_operations southbridge_intel_fsp_rangeley_ops = { - CHIP_NAME("Intel Rangeley Southbridge") - .enable_dev = soc_enable, -}; diff --git a/src/southbridge/intel/fsp_rangeley/soc.h b/src/southbridge/intel/fsp_rangeley/soc.h deleted file mode 100644 index 61ec266c42..0000000000 --- a/src/southbridge/intel/fsp_rangeley/soc.h +++ /dev/null @@ -1,452 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef SOUTHBRIDGE_INTEL_RANGELEY_SOC_H -#define SOUTHBRIDGE_INTEL_RANGELEY_SOC_H - -/* SOC types */ -#define SOC_TYPE_RANGELEY 0x1F - -/* - * It does not matter where we put the SMBus I/O base, as long as we - * keep it consistent and don't interfere with other devices. Stage2 - * will relocate this anyways. - * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE - * again. But handling static BARs is a generic problem that should be - * solved in the device allocator. - */ - -/* Southbridge internal device IO BARs (Set to match FSP settings) */ -#define SMBUS_IO_BASE 0xefa0 -#define SMBUS_SLAVE_ADDR 0x24 -#define DEFAULT_GPIOBASE 0x0500 -#define DEFAULT_ABASE 0x0400 - -/* Southbridge internal device MEM BARs (Set to match FSP settings) */ -#define DEFAULT_IBASE 0xfed08000 -#define DEFAULT_PBASE 0xfed03000 -#ifndef __ACPI__ -#define DEFAULT_RCBA ((u8 *)0xfed1c000) -#else -#define DEFAULT_RCBA 0xfed1c000 -#endif - -#ifndef __ACPI__ -#define DEBUG_PERIODIC_SMIS 0 - -#if defined (__SMM__) && !defined(__ASSEMBLER__) -void intel_soc_finalize_smm(void); -#endif - -#if !defined(__ASSEMBLER__) && !defined(__ROMCC__) -#if !defined(__PRE_RAM__) && !defined(__SMM__) -#include "chip.h" -int soc_silicon_revision(void); -int soc_silicon_type(void); -int soc_silicon_supported(int type, int rev); -void soc_enable(device_t dev); - -#include <arch/acpi.h> -void acpi_fill_in_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt); - -#if CONFIG_ELOG -void soc_log_state(void); -#endif -#else -void enable_smbus(void); -void enable_usb_bar(void); -int smbus_read_byte(unsigned device, unsigned address); -int early_spi_read(u32 offset, u32 size, u8 *buffer); -void rangeley_sb_early_initialization(void); -#endif -#endif - -#define MAINBOARD_POWER_OFF 0 -#define MAINBOARD_POWER_ON 1 -#define MAINBOARD_POWER_KEEP 2 - -#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON -#endif - -#define SOC_EHCI1_DEV PCI_DEV(0, 0x1d, 0) -#define PCIE_DEV_SLOT0 1 -#define PCIE_DEV_SLOT1 2 -#define PCIE_DEV_SLOT2 3 -#define PCIE_DEV_SLOT3 4 - -/* PCI Configuration Space (D31:F0): LPC */ -#define SOC_LPC_DEV PCI_DEV(0, 0x1f, 0) -#define SOC_LPC_DEVFN 0, PCI_DEVFN(0x1f,0) - - -/* Southbridge IO BARs */ -#define ABASE 0x40 /* IO BAR */ -#define PBASE 0x44 /* MEM BAR */ -#define GBASE 0x48 /* IO BAR */ -#define IOBASE 0x4C /* MEM BAR */ -#define IBASE 0x50 /* MEM BAR */ -#define SBASE 0x54 /* MEM BAR */ -#define MPBASE 0x58 /* MEM BAR */ -#define SET_BAR_ENABLE 0x02 - -/* Rangeley ILB defines */ -#define ILB_ACTL 0 -#define ILB_PIRQA_ROUT 0x8 -#define ILB_PIRQB_ROUT 0x9 -#define ILB_PIRQC_ROUT 0xA -#define ILB_PIRQD_ROUT 0xB -#define ILB_PIRQE_ROUT 0xC -#define ILB_PIRQF_ROUT 0xD -#define ILB_PIRQG_ROUT 0xE -#define ILB_PIRQH_ROUT 0xF -#define ILB_SERIRQ_CNTL 0x10 -#define ILB_IR00 0x20 -#define ILB_IR01 0x22 -#define ILB_IR02 0x24 -#define ILB_IR03 0x26 -#define ILB_IR04 0x28 -#define ILB_IR05 0x2A -#define ILB_IR06 0x2C -#define ILB_IR07 0x2E -#define ILB_IR08 0x30 -#define ILB_IR09 0x32 -#define ILB_IR10 0x34 -#define ILB_IR11 0x36 -#define ILB_IR12 0x38 -#define ILB_IR13 0x3A -#define ILB_IR14 0x3C -#define ILB_IR15 0x3E -#define ILB_IR16 0x40 -#define ILB_IR17 0x42 -#define ILB_IR18 0x44 -#define ILB_IR19 0x46 -#define ILB_IR20 0x48 -#define ILB_IR21 0x4A -#define ILB_IR22 0x4C -#define ILB_IR23 0x4E -#define ILB_IR24 0x50 -#define ILB_IR25 0x52 -#define ILB_IR26 0x54 -#define ILB_IR27 0x56 -#define ILB_IR28 0x58 -#define ILB_IR29 0x5A -#define ILB_IR30 0x5C -#define ILB_IR31 0x5E -#define ILB_OIC 0x60 - -/* PCI Configuration Space (D31:F2/5) */ -#define SOC_SATA_DEV PCI_DEV(0, 0x17, 0) -#define SOC_SATA2_DEV PCI_DEV(0, 0x18, 0) - -#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ -#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ -#define SATA_SP 0xd0 /* Scratchpad */ -#define SATA_MAP 0x90 -#define SATA_PSC 0x92 - -/* SATA IOBP Registers */ -#define SATA_IOBP_SP0G3IR 0xea000151 -#define SATA_IOBP_SP1G3IR 0xea000051 - -/* PCI Configuration Space (D31:F3): SMBus */ -#define SOC_SMBUS_DEV PCI_DEV(0, 0x1f, 3) -#define SMB_BASE 0x20 -#define HOSTC 0x40 -#define SMB_RCV_SLVA 0x09 - -/* HOSTC bits */ -#define I2C_EN (1 << 2) -#define SMB_SMI_EN (1 << 1) -#define HST_EN (1 << 0) - -/* SMBus I/O bits. */ -#define SMBHSTSTAT 0x0 -#define SMBHSTCTL 0x2 -#define SMBHSTCMD 0x3 -#define SMBXMITADD 0x4 -#define SMBHSTDAT0 0x5 -#define SMBHSTDAT1 0x6 -#define SMBBLKDAT 0x7 -#define SMBTRNSADD 0x9 -#define SMBSLVDATA 0xa -#define SMLINK_PIN_CTL 0xe -#define SMBUS_PIN_CTL 0xf - -#define SMBUS_TIMEOUT (10 * 1000 * 100) - -/* Root Complex Register Block */ -#define RCBA 0xf0 -#define RCBA_ENABLE 0x01 - -#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBA + x)) -#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBA + x)) -#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBA + x)) - -#define RCBA_AND_OR(bits, x, and, or) \ - RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or)) -#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or) -#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or) -#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or) -#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or) - -/* Root Port configuration space hide */ -#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) -/* Get the function number assigned to a Root Port */ -#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) -/* Set the function number for a Root Port */ -#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) -/* Root Port function number mask */ -#define RPFN_FNMASK(port) (7 << ((port) * 4)) - - -#define NOINT 0 -#define INTA 1 -#define INTB 2 -#define INTC 3 -#define INTD 4 - -#define DIR_IDR 12 /* Interrupt D Pin Offset */ -#define DIR_ICR 8 /* Interrupt C Pin Offset */ -#define DIR_IBR 4 /* Interrupt B Pin Offset */ -#define DIR_IAR 0 /* Interrupt A Pin Offset */ - -#define PIRQA 0 -#define PIRQB 1 -#define PIRQC 2 -#define PIRQD 3 -#define PIRQE 4 -#define PIRQF 5 -#define PIRQG 6 -#define PIRQH 7 - -/* IO Buffer Programming */ -#define IOBPIRI 0x2330 -#define IOBPD 0x2334 -#define IOBPS 0x2338 -#define IOBPS_RW_BX ((1 << 9)|(1 << 10)) -#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10)) -#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10)) - - - -#define DIR_ROUTE(x,a,b,c,d) \ - RCBA32(x) = (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ - ((b) << DIR_IBR) | ((a) << DIR_IAR)) - -/* PBASE Registers */ -#define PMC_CFG 0x08 -#define SPS (1 << 5) -#define NO_REBOOT (1 << 4) -#define SX_ENT_TO_EN (1 << 3) -#define TIMING_T581 (1 << 0) - -#define GEN_PMCON1 0x20 -# define DISB (1 << 23) -# define MEM_SR (1 << 21) -# define SRS (1 << 20) -# define CTS (1 << 19) -# define MS4V (1 << 18) -# define PWR_FLR (1 << 16) -# define PME_B0_S5_DIS (1 << 15) -# define SUS_PWR_FLR (1 << 14) -# define WOL_EN_OVRD (1 << 13) -# define DIS_SLP_X_STRCH_SUS_UP (1 << 12) -# define GEN_RST_STS (1 << 9) -# define RPS (1 << 2) -# define AFTERG3_EN (1 << 0) - -/* Function Disable PBASE + 0x34 */ -#define PBASE_FUNC_DIS 0x34 -#define PBASE_DISABLE_QUICKASSIST (1 << 0) -#define PBASE_DISABLE_GBE(x) (1 << (12 + x)) -#define PBASE_DISABLE_SATA2 (1 << 22) -#define PBASE_DISABLE_EHCI (1 << 23) -#define PBASE_DISABLE_SATA3 (1 << 23) - -/* GPIOBASE */ -#define GPIO_SC_USE_SEL 0x00 -#define GPIO_SC_IO_SEL 0x04 -#define GPIO_SC_GP_LVL 0x08 -#define GPIO_SC_TPE 0x0c -#define GPIO_SC_TNE 0x10 -#define GPIO_SC_TS 0x14 -#define GPIO_SUS_USE_SEL 0x80 -#define GPIO_SUS_IO_SEL 0x84 -#define GPIO_SUS_GP_LVL 0x88 -#define GPIO_SUS_TPE 0x8c -#define GPIO_SUS_TNE 0x90 -#define GPIO_SUS_TS 0x94 -#define GPIO_SUS_WE 0x98 - -/* IOBASE */ -#define CFIO_PAD_CONF0 0x00 -#define CFIO_PAD_CONF1 0x04 -#define CFIO_PAD_VAL 0x08 -#define CFIO_PAD_DFT 0x0C - -/* ACPI BASE */ -#define PM1_STS 0x00 -#define WAK_STS (1 << 15) -#define PCIEXPWAK_STS (1 << 14) -#define PRBTNOR_STS (1 << 11) -#define RTC_STS (1 << 10) -#define PWRBTN_STS (1 << 8) -#define GBL_STS (1 << 5) -#define BM_STS (1 << 4) -#define TMROF_STS (1 << 0) -#define PM1_EN 0x02 -#define PCIEXPWAK_DIS (1 << 14) -#define RTC_EN (1 << 10) -#define PWRBTN_EN (1 << 8) -#define GBL_EN (1 << 5) -#define TMROF_EN (1 << 0) -#define PM1_CNT 0x04 -#define SLP_EN (1 << 13) -#define SLP_TYP (7 << 10) -#define SLP_TYP_S0 0 -#define SLP_TYP_S1 1 -#define SLP_TYP_S3 5 -#define SLP_TYP_S4 6 -#define SLP_TYP_S5 7 -#define GBL_RLS (1 << 2) -#define BM_RLD (1 << 1) -#define SCI_EN (1 << 0) -#define PM1_TMR 0x08 -#define PROC_CNT 0x10 -#define LV2 0x14 -#define LV3 0x15 -#define LV4 0x16 -#define PM2_CNT 0x50 // mobile only -#define GPE0_STS 0x20 -#define PME_B0_STS (1 << 13) -#define PME_STS (1 << 11) -#define BATLOW_STS (1 << 10) -#define PCI_EXP_STS (1 << 9) -#define RI_STS (1 << 8) -#define SMB_WAK_STS (1 << 7) -#define TCOSCI_STS (1 << 6) -#define SWGPE_STS (1 << 2) -#define HOT_PLUG_STS (1 << 1) -#define GPE0_EN 0x28 -#define PME_B0_EN (1 << 13) -#define PME_EN (1 << 11) -#define TCOSCI_EN (1 << 6) -#define SMI_EN 0x30 -#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic -#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic -#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS -#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) -#define MCSMI_EN (1 << 11) // Trap microcontroller range access -#define BIOS_RLS (1 << 7) // asserts SCI on bit set -#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set -#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# -#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# -#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic -#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit -#define EOS (1 << 1) // End of SMI (deassert SMI#) -#define GBL_SMI_EN (1 << 0) // SMI# generation at all? -#define SMI_STS 0x34 -#define ALT_GP_SMI_EN 0x38 -#define ALT_GP_SMI_STS 0x3a -#define GPE_CNTL 0x42 -#define DEVACT_STS 0x44 -#define PM2A_CNT_BLK 0x50 -#define SS_CNT 0x50 -#define C3_RES 0x54 -#define TCO1_STS 0x64 -#define DMISCI_STS (1 << 9) -#define TCO2_STS 0x66 -#define TCO1_CNT 0x68 -#define TCO_TMR_HALT (1 << 11) -#define TCO_LOCK (1 << 12) - -/* - * SPI Opcode Menu setup for SPIBAR lockdown - * should support most common flash chips. - */ - -#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ -#define SPI_OPTYPE_0 0x01 /* Write, no address */ - -#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */ -#define SPI_OPTYPE_1 0x03 /* Write, address required */ - -#define SPI_OPMENU_2 0x03 /* READ: Read Data */ -#define SPI_OPTYPE_2 0x02 /* Read, address required */ - -#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */ -#define SPI_OPTYPE_3 0x00 /* Read, no address */ - -#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */ -#define SPI_OPTYPE_4 0x03 /* Write, address required */ - -#define SPI_OPMENU_5 0x9f /* RDID: Read ID */ -#define SPI_OPTYPE_5 0x00 /* Read, no address */ - -#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */ -#define SPI_OPTYPE_6 0x03 /* Write, address required */ - -#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */ -#define SPI_OPTYPE_7 0x02 /* Read, address required */ - -#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \ - (SPI_OPMENU_5 << 8) | SPI_OPMENU_4) -#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \ - (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) - -#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ - (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ - (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ - (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) - -#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ - -#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */ -#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ -#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ -#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ -#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ -#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */ -#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) -#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ -#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ -#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ -#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ -#define SPIBAR_FADDR 0x08 /* SPI flash address */ -#define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */ - -/* HPET Registers - Base is set in hardware to 0xFED00000 */ -#define HPET_GCID 0xFED00000 /* General Capabilities and ID */ -#define HPET_GCFG 0xFED00010 /* General Configuration */ -#define HPET_GIS 0xFED00020 /* General Interrupt Status */ -#define HPET_MCV 0xFED000F0 /* Main Counter Value */ -#define HPET_T0C 0xFED00100 /* Timer 0 Configuration and Capabilities */ -#define HPET_T0CV_L 0xFED00108 /* Lower Timer 0 Comparator Value */ -#define HPET_T0CV_U 0xFED0010C /* Upper Timer 0 Comparator Value */ -#define HPET_T1C 0xFED00120 /* Timer 1 Configuration and Capabilities */ -#define HPET_T1CV 0xFED00128 /* Timer 1 Comparator Value */ -#define HPET_T2C 0xFED00140 /* Timer 2 Configuration and Capabilities */ -#define HPET_T2CV 0xFED00148 /* Timer 2 Comparator Value */ - - -#endif /* __ACPI__ */ -#endif /* SOUTHBRIDGE_INTEL_RANGELEY_PCH_H */ diff --git a/src/southbridge/intel/fsp_rangeley/spi.c b/src/southbridge/intel/fsp_rangeley/spi.c deleted file mode 100644 index 8a4eabce3c..0000000000 --- a/src/southbridge/intel/fsp_rangeley/spi.c +++ /dev/null @@ -1,753 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * Copyright (C) 2013, Intel Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* This file is derived from the flashrom project. */ -#include <stdint.h> -#include <stdlib.h> -#include <string.h> -#include <delay.h> -#include <arch/io.h> -#include <console/console.h> -#include <device/pci_ids.h> - -#include <spi-generic.h> - -static int ich_status_poll(u16 bitmask, int wait_til_set); - -#ifdef __SMM__ -#include <arch/pci_mmio_cfg.h> -#define pci_read_config_byte(dev, reg, targ)\ - *(targ) = pci_read_config8(dev, reg) -#define pci_read_config_word(dev, reg, targ)\ - *(targ) = pci_read_config16(dev, reg) -#define pci_read_config_dword(dev, reg, targ)\ - *(targ) = pci_read_config32(dev, reg) -#define pci_write_config_byte(dev, reg, val)\ - pci_write_config8(dev, reg, val) -#define pci_write_config_word(dev, reg, val)\ - pci_write_config16(dev, reg, val) -#define pci_write_config_dword(dev, reg, val)\ - pci_write_config32(dev, reg, val) -#else /* !__SMM__ */ -#include <device/device.h> -#include <device/pci.h> -#define pci_read_config_byte(dev, reg, targ)\ - *(targ) = pci_read_config8(dev, reg) -#define pci_read_config_word(dev, reg, targ)\ - *(targ) = pci_read_config16(dev, reg) -#define pci_read_config_dword(dev, reg, targ)\ - *(targ) = pci_read_config32(dev, reg) -#define pci_write_config_byte(dev, reg, val)\ - pci_write_config8(dev, reg, val) -#define pci_write_config_word(dev, reg, val)\ - pci_write_config16(dev, reg, val) -#define pci_write_config_dword(dev, reg, val)\ - pci_write_config32(dev, reg, val) -#endif /* !__SMM__ */ - -typedef struct spi_slave ich_spi_slave; - -static int ichspi_lock = 0; - -typedef struct ich7_spi_regs { - uint16_t spis; - uint16_t spic; - uint32_t spia; - uint64_t spid[8]; - uint64_t _pad; - uint32_t bbar; - uint16_t preop; - uint16_t optype; - uint8_t opmenu[8]; -} __attribute__((packed)) ich7_spi_regs; - -typedef struct ich9_spi_regs { - uint32_t bfpr; // 0 - uint16_t hsfs; // 4 - uint16_t hsfc; // 6 - uint32_t faddr; // 8 - uint32_t _reserved0; // 0xC - uint32_t fdata[16]; // 0x10 - uint32_t frap; // 0x50 - uint32_t freg[5]; // 0x54 - uint32_t _reserved1[3]; // 0x67 - uint32_t pr[5]; // 0x74 - uint32_t _reserved2[2]; // 0x88 - uint8_t ssfs; // 0x90 - uint8_t ssfc[3]; // 0x91 - uint16_t preop; // 0x94 - uint16_t optype; // 0x96 - uint8_t opmenu[8]; // 0x98 - uint32_t bbar; // 0xB0 - uint8_t _reserved3[12]; - uint32_t fdoc; - uint32_t fdod; - uint8_t _reserved4[8]; - uint32_t afc; - uint32_t lvscc; - uint32_t uvscc; - uint8_t _reserved5[4]; - uint32_t fpb; - uint8_t _reserved6[28]; - uint32_t srdl; - uint32_t srdc; - uint32_t srd; -} __attribute__((packed)) ich9_spi_regs; - -typedef struct ich10_spi_regs { - uint32_t bfpr; - uint16_t hsfs; - uint16_t hsfc; - uint32_t faddr; - uint32_t _reserved0; - uint32_t fdata[16]; - uint32_t fracc; - uint32_t freg[5]; - uint32_t _reserved1[3]; - uint32_t pr[5]; - uint32_t _reserved2[2]; - uint8_t ssfs; - uint8_t ssfc[3]; - uint16_t preop; - uint16_t optype; - uint8_t opmenu[8]; - uint8_t _reserved3[16]; - uint32_t fdoc; - uint32_t fdod; - uint8_t _reserved4[8]; - uint32_t afc; - uint32_t lvscc; - uint32_t uvscc; - uint8_t _reserved5[4]; - uint32_t fpb; - uint8_t _reserved6[36]; - uint32_t scs; - uint32_t bcr; - uint32_t tcgc; -} __attribute__((packed)) ich10_spi_regs; - -typedef struct ich_spi_controller { - int locked; - - uint8_t *opmenu; - int menubytes; - uint16_t *preop; - uint16_t *optype; - uint32_t *addr; - uint8_t *data; - unsigned databytes; - uint8_t *status; - uint16_t *control; - uint32_t *bbar; - uint8_t *bcr; -} ich_spi_controller; - -static ich_spi_controller cntlr; - -enum { - SPIS_SCIP = 0x0001, - SPIS_GRANT = 0x0002, - SPIS_CDS = 0x0004, - SPIS_FCERR = 0x0008, - SSFS_AEL = 0x0010, - SPIS_LOCK = 0x8000, - SPIS_RESERVED_MASK = 0x7ff0, - SSFS_RESERVED_MASK = 0x7fe2 -}; - -enum { - SPIC_SCGO = 0x000002, - SPIC_ACS = 0x000004, - SPIC_SPOP = 0x000008, - SPIC_DBC = 0x003f00, - SPIC_DS = 0x004000, - SPIC_SME = 0x008000, - SSFC_SCF_MASK = 0x070000, - SSFC_RESERVED = 0xf80000 -}; - -enum { - HSFS_FDONE = 0x0001, - HSFS_FCERR = 0x0002, - HSFS_AEL = 0x0004, - HSFS_BERASE_MASK = 0x0018, - HSFS_BERASE_SHIFT = 3, - HSFS_SCIP = 0x0020, - HSFS_FDOPSS = 0x2000, - HSFS_FDV = 0x4000, - HSFS_FLOCKDN = 0x8000 -}; - -enum { - HSFC_FGO = 0x0001, - HSFC_FCYCLE_MASK = 0x0006, - HSFC_FCYCLE_SHIFT = 1, - HSFC_FDBC_MASK = 0x3f00, - HSFC_FDBC_SHIFT = 8, - HSFC_FSMIE = 0x8000 -}; - -enum { - BCR_BIOSWE = 0x0001, - BCR_BLE = 0x0002, - BCR_SRC_MASK = 0x000c, - BCR_SRC_SHIFT = 0x0002, - BCR_SRC_NO_PREF = 0x0000, - BCR_SRC_NO_PREF_CACHE = 0x0004, - BCR_SRC_EN_PREF_CACHE = 0x0008, - BCR_TSS = 0x0010, - BCR_SMMBWP = 0x0020, - BCR_RESERVED_MASK = 0xffc0 -}; - -enum { - SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, - SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, - SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, - SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3, -}; - -#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH) - -static u8 readb_(const void *addr) -{ - u8 v = read8(addr); - printk(BIOS_DEBUG, "read %2.2x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); - return v; -} - -static u16 readw_(const void *addr) -{ - u16 v = read16(addr); - printk(BIOS_DEBUG, "read %4.4x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); - return v; -} - -static u32 readl_(const void *addr) -{ - u32 v = read32(addr); - printk(BIOS_DEBUG, "read %8.8x from %4.4x\n", - v, ((unsigned) addr & 0xffff) - 0xf020); - return v; -} - -static void writeb_(u8 b, const void *addr) -{ - write8(addr, b); - printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); -} - -static void writew_(u16 b, const void *addr) -{ - write16(addr, b); - printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); -} - -static void writel_(u32 b, const void *addr) -{ - write32((unsigned long)addr, b); - printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n", - b, ((unsigned) addr & 0xffff) - 0xf020); -} - -#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */ - -#define readb_(a) read8(a) -#define readw_(a) read16(a) -#define readl_(a) read32(a) -#define writeb_(val, addr) write8(addr, val) -#define writew_(val, addr) write16(addr, val) -#define writel_(val, addr) write32(addr, val) - -#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */ - -static void write_reg(const void *value, void *dest, uint32_t size) -{ - const uint8_t *bvalue = value; - uint8_t *bdest = dest; - - while (size >= 4) { - writel_(*(const uint32_t *)bvalue, bdest); - bdest += 4; bvalue += 4; size -= 4; - } - while (size) { - writeb_(*bvalue, bdest); - bdest++; bvalue++; size--; - } -} - -static void read_reg(const void *src, void *value, uint32_t size) -{ - const uint8_t *bsrc = src; - uint8_t *bvalue = value; - - while (size >= 4) { - *(uint32_t *)bvalue = readl_(bsrc); - bsrc += 4; bvalue += 4; size -= 4; - } - while (size) { - *bvalue = readb_(bsrc); - bsrc++; bvalue++; size--; - } -} - -static void ich_set_bbar(uint32_t minaddr) -{ - const uint32_t bbar_mask = 0x00ffff00; - uint32_t ichspi_bbar; - - if (cntlr.bbar == NULL) - return; - - minaddr &= bbar_mask; - ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; - ichspi_bbar |= minaddr; - writel_(ichspi_bbar, cntlr.bbar); -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs) -{ - ich_spi_slave *slave = malloc(sizeof(*slave)); - - if (!slave) { - printk(BIOS_DEBUG, "ICH SPI: Bad allocation\n"); - return NULL; - } - - memset(slave, 0, sizeof(*slave)); - - slave->bus = bus; - slave->cs = cs; - return slave; -} - -/* - * Check if this device ID matches one of supported Intel SOC devices. - * - * Return the ICH version if there is a match, or zero otherwise. - */ -static inline int get_ich_version(uint16_t device_id) -{ - - if ((device_id >= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MIN && - device_id <= PCI_DEVICE_ID_INTEL_RANGELEY_LPC_MAX)) - return 10; - - return 0; -} - -void spi_init(void) -{ - int ich_version = 0; - uint8_t bios_cntl; - device_t dev; - uint32_t ids; - uint16_t vendor_id, device_id; - -#ifdef __SMM__ - dev = PCI_DEV(0, 31, 0); -#else - dev = dev_find_slot(0, PCI_DEVFN(31, 0)); -#endif - pci_read_config_dword(dev, 0, &ids); - vendor_id = ids; - device_id = (ids >> 16); - - if (vendor_id != PCI_VENDOR_ID_INTEL) { - printk(BIOS_DEBUG, "SPI: No SOC found.\n"); - return; - } - - ich_version = get_ich_version(device_id); - - if (!ich_version) { - printk(BIOS_DEBUG, "SPI: No known SOC found.\n"); - return; - } - - switch (ich_version) { - case 10: - { - uint8_t *spibase; /* SPI Base Address */ - uint32_t sbase; /* SPI Base Address Register */ - pci_read_config_dword(dev, 0x54, &sbase); - /* Bits 31-9 are the base address, 8-4 are reserved, 3-0 are used. */ - spibase = (uint8_t *)(sbase & 0xffffff00); - ich10_spi_regs *ich10_spi = - (ich10_spi_regs *)(spibase); - ichspi_lock = readw_(&ich10_spi->hsfs) & HSFS_FLOCKDN; - cntlr.opmenu = ich10_spi->opmenu; - cntlr.menubytes = sizeof(ich10_spi->opmenu); - cntlr.optype = &ich10_spi->optype; - cntlr.addr = &ich10_spi->faddr; - cntlr.data = (uint8_t *)ich10_spi->fdata; - cntlr.databytes = sizeof(ich10_spi->fdata); - cntlr.status = &ich10_spi->ssfs; - cntlr.control = (uint16_t *)ich10_spi->ssfc; - cntlr.bbar = NULL; - cntlr.preop = &ich10_spi->preop; - cntlr.bcr = (uint8_t *)&ich10_spi->bcr; - break; - } - default: - printk(BIOS_DEBUG, "ICH SPI: Unrecognized ICH version %d.\n", ich_version); - } - - ich_set_bbar(0); - - /* Disable the BIOS write protect so write commands are allowed. */ - switch (ich_version) { - case 10: - { - /* Deassert SMM BIOS write protect(SMM BWP) and assert enable flash write(BIOSWE) */ - bios_cntl = readb_(cntlr.bcr); - bios_cntl &= ~BCR_SMMBWP; - bios_cntl |= BCR_BIOSWE; - writeb_(bios_cntl, cntlr.bcr); - break; - } - - default: - break; - } -} - -int spi_claim_bus(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - /* Handled by ICH automatically. */ -} - -typedef struct spi_transaction { - const uint8_t *out; - uint32_t bytesout; - uint8_t *in; - uint32_t bytesin; - uint8_t type; - uint8_t opcode; - uint32_t offset; -} spi_transaction; - -static inline void spi_use_out(spi_transaction *trans, unsigned bytes) -{ - trans->out += bytes; - trans->bytesout -= bytes; -} - -static inline void spi_use_in(spi_transaction *trans, unsigned bytes) -{ - trans->in += bytes; - trans->bytesin -= bytes; -} - -static void spi_setup_type(spi_transaction *trans) -{ - trans->type = 0xFF; - - /* Try to guess spi type from read/write sizes. */ - if (trans->bytesin == 0) { - if (trans->bytesout > 4) - /* - * If bytesin = 0 and bytesout > 4, we presume this is - * a write data operation, which is accompanied by an - * address. - */ - trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; - else - trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; - return; - } - - if (trans->bytesout == 1) { /* and bytesin is > 0 */ - trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; - return; - } - - if (trans->bytesout == 4) { /* and bytesin is > 0 */ - trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; - } - - /* Fast read command is called with 5 bytes instead of 4 */ - if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { - trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; - --trans->bytesout; - } -} - -static int spi_setup_opcode(spi_transaction *trans) -{ - uint16_t optypes; - uint8_t opmenu[cntlr.menubytes]; - - trans->opcode = trans->out[0]; - spi_use_out(trans, 1); - if (!ichspi_lock) { - /* The lock is off, so just use index 0. */ - writeb_(trans->opcode, cntlr.opmenu); - optypes = readw_(cntlr.optype); - optypes = (optypes & 0xfffc) | (trans->type & 0x3); - writew_(optypes, cntlr.optype); - return 0; - } else { - /* The lock is on. See if what we need is on the menu. */ - uint8_t optype; - uint16_t opcode_index; - - /* Write Enable is handled as atomic prefix */ - if (trans->opcode == SPI_OPCODE_WREN) - return 0; - - read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); - for (opcode_index = 0; opcode_index < cntlr.menubytes; - opcode_index++) { - if (opmenu[opcode_index] == trans->opcode) - break; - } - - if (opcode_index == cntlr.menubytes) { - printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", - trans->opcode); - return -1; - } - - optypes = readw_(cntlr.optype); - optype = (optypes >> (opcode_index * 2)) & 0x3; - if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && - optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && - trans->bytesout >= 3) { - /* We guessed wrong earlier. Fix it up. */ - trans->type = optype; - } - if (optype != trans->type) { - printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", - optype); - return -1; - } - return opcode_index; - } -} - -static int spi_setup_offset(spi_transaction *trans) -{ - /* Separate the SPI address and data. */ - switch (trans->type) { - case SPI_OPCODE_TYPE_READ_NO_ADDRESS: - case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: - return 0; - case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: - case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: - trans->offset = ((uint32_t)trans->out[0] << 16) | - ((uint32_t)trans->out[1] << 8) | - ((uint32_t)trans->out[2] << 0); - spi_use_out(trans, 3); - return 1; - default: - printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); - return -1; - } -} - -/* - * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set - * below is True) or 0. In case the wait was for the bit(s) to set - write - * those bits back, which would cause resetting them. - * - * Return the last read status value on success or -1 on failure. - */ -static int ich_status_poll(u16 bitmask, int wait_til_set) -{ - int timeout = 60000; /* This will result in 600 ms */ - u16 status = 0; - - while (timeout--) { - status = readw_(cntlr.status); - if (wait_til_set ^ ((status & bitmask) == 0)) { - if (wait_til_set) - writew_((status & bitmask), cntlr.status); - return status; - } - udelay(10); - } - - printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", - status, bitmask); - return -1; -} - -unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) -{ - return min(cntlr.databytes, buf_len); -} - -int spi_xfer(struct spi_slave *slave, const void *dout, - unsigned int bytesout, void *din, unsigned int bytesin) -{ - uint16_t control; - int16_t opcode_index; - int with_address; - int status; - - spi_transaction trans = { - dout, bytesout, - din, bytesin, - 0xff, 0xff, 0 - }; - - /* There has to always at least be an opcode. */ - if (!bytesout || !dout) { - printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); - return -1; - } - /* Make sure if we read something we have a place to put it. */ - if (bytesin != 0 && !din) { - printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); - return -1; - } - - if (ich_status_poll(SPIS_SCIP, 0) == -1) - return -1; - - writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); - - spi_setup_type(&trans); - if ((opcode_index = spi_setup_opcode(&trans)) < 0) - return -1; - if ((with_address = spi_setup_offset(&trans)) < 0) - return -1; - - if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) { - /* - * Treat Write Enable as Atomic Pre-Op if possible - * in order to prevent the Management Engine from - * issuing a transaction between WREN and DATA. - */ - writew_(trans.opcode, cntlr.preop); - return 0; - } - - /* Preset control fields */ - control = SPIC_SCGO | ((opcode_index & 0x07) << 4); - - /* Issue atomic preop cycle if needed */ - if (readw_(cntlr.preop)) - control |= SPIC_ACS; - - if (!trans.bytesout && !trans.bytesin) { - /* SPI addresses are 24 bit only */ - if (with_address) - writel_(trans.offset & 0x00FFFFFF, cntlr.addr); - - /* - * This is a 'no data' command (like Write Enable), its - * bitesout size was 1, decremented to zero while executing - * spi_setup_opcode() above. Tell the chip to send the - * command. - */ - writew_(control, cntlr.control); - - /* wait for the result */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; - - if (status & SPIS_FCERR) { - printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); - return -1; - } - - goto spi_xfer_exit; - } - - /* - * Check if this is a write command attempting to transfer more bytes - * than the controller can handle. Iterations for writes are not - * supported here because each SPI write command needs to be preceded - * and followed by other SPI commands, and this sequence is controlled - * by the SPI chip driver. - */ - if (trans.bytesout > cntlr.databytes) { - printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" - " spi_crop_chunk()?\n"); - return -1; - } - - /* - * Read or write up to databytes bytes at a time until everything has - * been sent. - */ - while (trans.bytesout || trans.bytesin) { - uint32_t data_length; - - /* SPI addresses are 24 bit only */ - writel_(trans.offset & 0x00FFFFFF, cntlr.addr); - - if (trans.bytesout) - data_length = min(trans.bytesout, cntlr.databytes); - else - data_length = min(trans.bytesin, cntlr.databytes); - - /* Program data into FDATA0 to N */ - if (trans.bytesout) { - write_reg(trans.out, cntlr.data, data_length); - spi_use_out(&trans, data_length); - if (with_address) - trans.offset += data_length; - } - - /* Add proper control fields' values */ - control &= ~((cntlr.databytes - 1) << 8); - control |= SPIC_DS; - control |= (data_length - 1) << 8; - - /* write it */ - writew_(control, cntlr.control); - - /* Wait for Cycle Done Status or Flash Cycle Error. */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; - - if (status & SPIS_FCERR) { - printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); - return -1; - } - - if (trans.bytesin) { - read_reg(cntlr.data, trans.in, data_length); - spi_use_in(&trans, data_length); - if (with_address) - trans.offset += data_length; - } - } - -spi_xfer_exit: - /* Clear atomic preop now that xfer is done */ - writew_(0, cntlr.preop); - - return 0; -} diff --git a/src/southbridge/intel/fsp_rangeley/watchdog.c b/src/southbridge/intel/fsp_rangeley/watchdog.c deleted file mode 100644 index 1ea4985769..0000000000 --- a/src/southbridge/intel/fsp_rangeley/watchdog.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include <console/console.h> -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <watchdog.h> -#include "soc.h" - -void watchdog_off(void) -{ - device_t dev; - u32 value, abase; - - /* Turn off the watchdog. */ - dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); - - /* Enable I/O space. */ - value = pci_read_config16(dev, 0x04); - value |= 1; - pci_write_config16(dev, 0x04, value); - - /* Get TCO base. */ - abase = (pci_read_config32(dev, ABASE) & ~0xf); - - /* Disable the watchdog timer. */ - value = inw(abase + 0x68); - value |= 1 << 11; - outw(value, abase + 0x68); - - /* Clear TCO timeout status. */ - outw(0x0008, abase + 0x64); - outw(0x0002, abase + 0x66); - - printk(BIOS_DEBUG, "TCO Watchdog disabled\n"); -} |