diff options
Diffstat (limited to 'src/southbridge/intel/common')
-rw-r--r-- | src/southbridge/intel/common/smi.c | 20 | ||||
-rw-r--r-- | src/southbridge/intel/common/smihandler.c | 53 |
2 files changed, 27 insertions, 46 deletions
diff --git a/src/southbridge/intel/common/smi.c b/src/southbridge/intel/common/smi.c index deaecb2625..d8e6d43a18 100644 --- a/src/southbridge/intel/common/smi.c +++ b/src/southbridge/intel/common/smi.c @@ -23,16 +23,15 @@ #include <cpu/x86/cache.h> #include <cpu/x86/smm.h> #include <cpu/intel/smm/gen1/smi.h> +#include <southbridge/intel/common/pmbase.h> #include "pmutil.h" #define DEBUG_PERIODIC_SMIS 0 -static u16 pmbase; - u16 get_pmbase(void) { - return pmbase; + return lpc_get_pmbase(); } void southbridge_smm_init(void) @@ -48,12 +47,9 @@ void southbridge_smm_init(void) printk(BIOS_DEBUG, "Initializing southbridge SMI..."); - pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - D31F0_PMBASE) & 0xff80; - - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", lpc_get_pmbase()); - smi_en = inl(pmbase + SMI_EN); + smi_en = read_pmbase32(SMI_EN); if (smi_en & APMC_EN) { printk(BIOS_INFO, "SMI# handler already enabled?\n"); return; @@ -67,14 +63,14 @@ void southbridge_smm_init(void) dump_tco_status(reset_tco_status()); /* Disable GPE0 PME_B0 */ - gpe0_en = inl(pmbase + GPE0_EN); + gpe0_en = read_pmbase32(GPE0_EN); gpe0_en &= ~PME_B0_EN; - outl(gpe0_en, pmbase + GPE0_EN); + write_pmbase32(GPE0_EN, gpe0_en); pm1_en = 0; pm1_en |= PWRBTN_EN; pm1_en |= GBL_EN; - outw(pm1_en, pmbase + PM1_EN); + write_pmbase16(PM1_EN, pm1_en); /* Enable SMI generation: * - on TCO events @@ -106,7 +102,7 @@ void southbridge_smm_init(void) /* The following need to be on for SMIs to happen */ smi_en |= EOS | GBL_SMI_EN; - outl(smi_en, pmbase + SMI_EN); + write_pmbase32(SMI_EN, smi_en); } void southbridge_trigger_smi(void) diff --git a/src/southbridge/intel/common/smihandler.c b/src/southbridge/intel/common/smihandler.c index 65a1b96872..fb2fe59bd1 100644 --- a/src/southbridge/intel/common/smihandler.c +++ b/src/southbridge/intel/common/smihandler.c @@ -25,21 +25,21 @@ #include <elog.h> #include <halt.h> #include <pc80/mc146818rtc.h> +#include <southbridge/intel/common/pmbase.h> + #include "pmutil.h" static int smm_initialized = 0; -static u16 pmbase; - u16 get_pmbase(void) { - return pmbase; + return lpc_get_pmbase(); } /* Defined in <cpu/x86/smm.h> which is used outside of common code*/ u16 smm_get_pmbase(void) { - return get_pmbase(); + return lpc_get_pmbase(); } void gpi_route_interrupt(u8 gpi, u8 mode) @@ -67,11 +67,7 @@ void gpi_route_interrupt(u8 gpi, u8 mode) */ void southbridge_smi_set_eos(void) { - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); + write_pmbase8(SMI_EN, read_pmbase8(SMI_EN) | EOS); } static void busmaster_disable_on_bus(int bus) @@ -134,12 +130,10 @@ static void southbridge_smi_sleep(void) outb(tmp72, 0x72); /* First, disable further SMIs */ - reg8 = inb(pmbase + SMI_EN); - reg8 &= ~SLP_SMI_EN; - outb(reg8, pmbase + SMI_EN); + write_pmbase8(SMI_EN, read_pmbase8(SMI_EN) & ~SLP_SMI_EN); /* Figure out SLP_TYP */ - reg32 = inl(pmbase + PM1_CNT); + reg32 = read_pmbase32(PM1_CNT); printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); slp_typ = acpi_sleep_from_pm1(reg32); @@ -179,7 +173,7 @@ static void southbridge_smi_sleep(void) case ACPI_S5: printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); - outl(0, pmbase + GPE0_EN); + write_pmbase32(GPE0_EN, 0); /* Always set the flag in case CMOS was changed on runtime. For * "KEEP", switch to "OFF" - KEEP is software emulated @@ -202,7 +196,7 @@ static void southbridge_smi_sleep(void) * event again. We need to set BIT13 (SLP_EN) though to make the * sleep happen. */ - outl(reg32 | SLP_EN, pmbase + PM1_CNT); + write_pmbase32(PM1_CNT, reg32 | SLP_EN); /* Make sure to stop executing code here for S3/S4/S5 */ if (slp_typ >= ACPI_S3) @@ -212,11 +206,11 @@ static void southbridge_smi_sleep(void) * the line above. However, if we entered sleep state S1 and wake * up again, we will continue to execute code in this function. */ - reg32 = inl(pmbase + PM1_CNT); + reg32 = read_pmbase32(PM1_CNT); if (reg32 & SCI_EN) { /* The OS is not an ACPI OS, so we set the state to S0 */ reg32 &= ~(SLP_EN | SLP_TYP); - outl(reg32, pmbase + PM1_CNT); + write_pmbase32(PM1_CNT, reg32); } } @@ -283,7 +277,6 @@ static int mainboard_finalized = 0; static void southbridge_smi_apmc(void) { - u32 pmctrl; u8 reg8; /* Emulate B2 register as the FADT / Linux expects it */ @@ -305,15 +298,11 @@ static void southbridge_smi_apmc(void) printk(BIOS_DEBUG, "P-state control\n"); break; case APM_CNT_ACPI_DISABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl &= ~SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); + write_pmbase32(PM1_CNT, read_pmbase32(PM1_CNT) & ~SCI_EN); printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); break; case APM_CNT_ACPI_ENABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl |= SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); + write_pmbase32(PM1_CNT, read_pmbase32(PM1_CNT) | SCI_EN); printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); break; case APM_CNT_GNVS_UPDATE: @@ -360,7 +349,7 @@ static void southbridge_smi_pm1(void) #if IS_ENABLED(CONFIG_ELOG_GSMI) elog_add_event(ELOG_TYPE_POWER_BUTTON); #endif - outl(reg32, pmbase + PM1_CNT); + write_pmbase32(PM1_CNT, reg32); } } @@ -375,24 +364,23 @@ static void southbridge_smi_gpe0(void) static void southbridge_smi_gpi(void) { u16 reg16; - reg16 = inw(pmbase + ALT_GP_SMI_STS); - outw(reg16, pmbase + ALT_GP_SMI_STS); - reg16 &= inw(pmbase + ALT_GP_SMI_EN); + reg16 = reset_alt_gp_smi_status(); + reg16 &= read_pmbase16(ALT_GP_SMI_EN); mainboard_smi_gpi(reg16); if (reg16) printk(BIOS_DEBUG, "GPI (mask %04x)\n", reg16); - outw(reg16, pmbase + ALT_GP_SMI_STS); + write_pmbase16(ALT_GP_SMI_STS, reg16); } static void southbridge_smi_mc(void) { u32 reg32; - reg32 = inl(pmbase + SMI_EN); + reg32 = read_pmbase32(SMI_EN); /* Are periodic SMIs enabled? */ if ((reg32 & MCSMI_EN) == 0) @@ -445,7 +433,7 @@ static void southbridge_smi_periodic(void) { u32 reg32; - reg32 = inl(pmbase + SMI_EN); + reg32 = read_pmbase32(SMI_EN); /* Are periodic SMIs enabled? */ if ((reg32 & PERIODIC_EN) == 0) @@ -501,9 +489,6 @@ void southbridge_smi_handler(void) int i, dump = 0; u32 smi_sts; - /* Update global variable pmbase */ - pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - /* We need to clear the SMI status registers, or we won't see what's * happening in the following calls. */ |