diff options
Diffstat (limited to 'src/southbridge/intel/common')
| -rw-r--r-- | src/southbridge/intel/common/smbus.c | 77 |
1 files changed, 37 insertions, 40 deletions
diff --git a/src/southbridge/intel/common/smbus.c b/src/southbridge/intel/common/smbus.c index b2a78c9fc1..fb7f8e5754 100644 --- a/src/southbridge/intel/common/smbus.c +++ b/src/southbridge/intel/common/smbus.c @@ -101,19 +101,31 @@ static int setup_command(unsigned int smbus_base, u8 ctrl, u8 xmitadd) return 0; } -static int smbus_wait_until_active(u16 smbus_base) +static int execute_command(unsigned int smbus_base) { - unsigned long loops; - loops = SMBUS_TIMEOUT; + unsigned int loops = SMBUS_TIMEOUT; + u8 status; + + /* Start the command. */ + outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START), + smbus_base + SMBHSTCTL); + + /* Poll for it to start. */ do { - unsigned char val; smbus_delay(); - val = inb(smbus_base + SMBHSTSTAT); - if ((val & SMBHSTSTS_HOST_BUSY)) { - break; - } - } while (--loops); - return loops ? 0 : -1; + + /* If we poll too slow, we could miss HOST_BUSY flag + * set and detect INTR or x_ERR flags instead here. + */ + status = inb(smbus_base + SMBHSTSTAT); + status &= ~(SMBHSTSTS_SMBALERT_STS | SMBHSTSTS_INUSE_STS); + } while (--loops && status == 0); + + if (loops == 0) + return recover_master(smbus_base, + SMBUS_WAIT_UNTIL_ACTIVE_TIMEOUT); + + return 0; } static int smbus_wait_until_done(u16 smbus_base) @@ -149,12 +161,9 @@ int do_smbus_read_byte(unsigned int smbus_base, u8 device, outb(0, smbus_base + SMBHSTDAT0); /* Start the command */ - outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START), - smbus_base + SMBHSTCTL); - - /* poll for it to start */ - if (smbus_wait_until_active(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_ACTIVE_TIMEOUT; + ret = execute_command(smbus_base); + if (ret < 0) + return ret; /* Poll for transaction completion */ if (smbus_wait_until_done(smbus_base) < 0) @@ -190,12 +199,9 @@ int do_smbus_write_byte(unsigned int smbus_base, u8 device, outb(data, smbus_base + SMBHSTDAT0); /* Start the command */ - outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START), - smbus_base + SMBHSTCTL); - - /* poll for it to start */ - if (smbus_wait_until_active(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_ACTIVE_TIMEOUT; + ret = execute_command(smbus_base); + if (ret < 0) + return ret; /* Poll for transaction completion */ if (smbus_wait_until_done(smbus_base) < 0) @@ -236,12 +242,9 @@ int do_smbus_block_read(unsigned int smbus_base, u8 device, u8 cmd, outb(0, smbus_base + SMBHSTDAT0); /* Start the command */ - outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START), - smbus_base + SMBHSTCTL); - - /* poll for it to start */ - if (smbus_wait_until_active(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_ACTIVE_TIMEOUT; + ret = execute_command(smbus_base); + if (ret < 0) + return ret; /* Poll for transaction completion */ do { @@ -306,12 +309,9 @@ int do_smbus_block_write(unsigned int smbus_base, u8 device, u8 cmd, outb(*buf++, smbus_base + SMBBLKDAT); /* Start the command */ - outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START), - smbus_base + SMBHSTCTL); - - /* poll for it to start */ - if (smbus_wait_until_active(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_ACTIVE_TIMEOUT; + ret = execute_command(smbus_base); + if (ret < 0) + return ret; /* Poll for transaction completion */ do { @@ -367,12 +367,9 @@ int do_i2c_block_read(unsigned int smbus_base, u8 device, outb(offset, smbus_base + SMBHSTDAT1); /* Start the command */ - outb((inb(smbus_base + SMBHSTCTL) | SMBHSTCNT_START), - smbus_base + SMBHSTCTL); - - /* poll for it to start */ - if (smbus_wait_until_active(smbus_base) < 0) - return SMBUS_WAIT_UNTIL_ACTIVE_TIMEOUT; + ret = execute_command(smbus_base); + if (ret < 0) + return ret; /* Poll for transaction completion */ do { |